For unicast the hardware sometimes reports MIC errors even though the
frame that it received actually contains a valid MIC - on some chips this
can happen frequently enough to trigger TKIP countermeasures.
Fix this issue by not reporting MIC errors for unicast frames with a
valid key, letting mac80211 validate the MIC instead.
Additionally, strip the MIC for all frames that the hardware considers
valid to avoid wasting CPU cycles re-validating it.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/recv.c | 46 +++++++++++++++++---------------
1 files changed, 24 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 80bb04f..c76789e 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -814,16 +814,19 @@ static bool ath9k_rx_accept(struct ath_common *common,
struct ath_rx_status *rx_stats,
bool *decrypt_error)
{
-#define is_mc_or_valid_tkip_keyix ((is_mc || \
- (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \
- test_bit(rx_stats->rs_keyix, common->tkip_keymap))))
-
+ bool is_mc, is_valid_tkip, strip_mic, mic_error = false;
struct ath_hw *ah = common->ah;
__le16 fc;
u8 rx_status_len = ah->caps.rx_status_len;
fc = hdr->frame_control;
+ is_mc = !!is_multicast_ether_addr(hdr->addr1);
+ is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID &&
+ test_bit(rx_stats->rs_keyix, common->tkip_keymap);
+ strip_mic = is_valid_tkip && !(rx_stats->rs_status &
+ (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC));
+
if (!rx_stats->rs_datalen)
return false;
/*
@@ -850,25 +853,9 @@ static bool ath9k_rx_accept(struct ath_common *common,
if (rx_stats->rs_status & ATH9K_RXERR_PHY)
return false;
- if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
+ if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT)
*decrypt_error = true;
- } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
- bool is_mc;
- /*
- * The MIC error bit is only valid if the frame
- * is not a control frame or fragment, and it was
- * decrypted using a valid TKIP key.
- */
- is_mc = !!is_multicast_ether_addr(hdr->addr1);
- if (!ieee80211_is_ctl(fc) &&
- !ieee80211_has_morefrags(fc) &&
- !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
- is_mc_or_valid_tkip_keyix)
- rxs->flag |= RX_FLAG_MMIC_ERROR;
- else
- rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
- }
/*
* Reject error frames with the exception of
* decryption and MIC failures. For monitor mode,
@@ -886,6 +873,18 @@ static bool ath9k_rx_accept(struct ath_common *common,
}
}
}
+
+ /*
+ * For unicast frames the MIC error bit can have false positives,
+ * so all MIC error reports need to be validated in software.
+ * False negatives are not common, so skip software verification
+ * if the hardware considers the MIC valid.
+ */
+ if (strip_mic)
+ rxs->flag |= RX_FLAG_MMIC_STRIPPED;
+ else if (is_mc && mic_error)
+ rxs->flag |= RX_FLAG_MMIC_ERROR;
+
return true;
}
@@ -1880,6 +1879,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
ath9k_rx_skb_postprocess(common, hdr_skb, &rs,
rxs, decrypt_error);
+ if (rxs->flag & RX_FLAG_MMIC_STRIPPED)
+ skb_trim(skb, skb->len - 8);
+
/* We will now give hardware our shiny new allocated skb */
bf->bf_mpdu = requeue_skb;
bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data,
--
1.7.3.2