From: Mohammed Shafi Shajakhan <[email protected]>
When WLAN is idle ensure we downgrade to FTP_STOMP_LOW weight
(from STOMP_LOW) to provide more bandwidth for BT FTP profile.
WLAN's idleness can be estimated by taking into account of the
rx data packets and just ignore beacons, qos nullfunc etc.
Also update bt_wait_time even if the chip is in NETWORK SLEEP
mode. This should help BT throughput when WLAN is idle.
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/gpio.c | 2 +-
drivers/net/wireless/ath/ath9k/recv.c | 5 ++++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index d9ed141..c722ded 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -204,6 +204,7 @@ static void ath_btcoex_period_timer(unsigned long data)
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (sc->sc_ah->power_mode == ATH9K_PM_NETWORK_SLEEP) {
+ btcoex->bt_wait_time += btcoex->btcoex_period;
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
goto skip_hw_wakeup;
}
@@ -214,7 +215,6 @@ static void ath_btcoex_period_timer(unsigned long data)
ath_detect_bt_priority(sc);
is_btscan = test_bit(BT_OP_SCAN, &btcoex->op_flags);
- btcoex->bt_wait_time += btcoex->btcoex_period;
if (btcoex->bt_wait_time > ATH_BTCOEX_RX_WAIT_TIME) {
if (ar9003_mci_state(ah, MCI_STATE_NEED_FTP_STOMP) &&
(mci->num_pan || mci->num_other_acl))
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 83d16e7..a04028b 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1105,7 +1105,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
else
rs.is_mybeacon = false;
- sc->rx.num_pkts++;
+ if (ieee80211_is_data_present(hdr->frame_control) &&
+ !ieee80211_is_qos_nullfunc(hdr->frame_control))
+ sc->rx.num_pkts++;
+
ath_debug_stat_rx(sc, &rs);
/*
--
1.7.0.4
From: Mohammed Shafi Shajakhan <[email protected]>
Currently ath9k need to have beacon interval matched
between STA mode and beaconing mode. Advertize this
through interface combinations.
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/init.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index fad3ccd..546bae9 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -687,6 +687,7 @@ static const struct ieee80211_iface_combination if_comb = {
.n_limits = ARRAY_SIZE(if_limits),
.max_interfaces = 2048,
.num_different_channels = 1,
+ .beacon_int_infra_match = true,
};
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
--
1.7.0.4
From: Mohammed Shafi Shajakhan <[email protected]>
Once the driver advertizes interface combination logic
based on its firmware/hardware limitation, cfg80211
takes care of all the necessary logic such as maximum
beaconing vifs, standlone interface etc.
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 20 --------------------
1 files changed, 0 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index ca78e33..66f6a74 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1036,26 +1036,6 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw,
mutex_lock(&priv->mutex);
- if (priv->nvifs >= ATH9K_HTC_MAX_VIF) {
- mutex_unlock(&priv->mutex);
- return -ENOBUFS;
- }
-
- if (priv->num_ibss_vif ||
- (priv->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
- ath_err(common, "IBSS coexistence with other modes is not allowed\n");
- mutex_unlock(&priv->mutex);
- return -ENOBUFS;
- }
-
- if (((vif->type == NL80211_IFTYPE_AP) ||
- (vif->type == NL80211_IFTYPE_ADHOC)) &&
- ((priv->num_ap_vif + priv->num_ibss_vif) >= ATH9K_HTC_MAX_BCN_VIF)) {
- ath_err(common, "Max. number of beaconing interfaces reached\n");
- mutex_unlock(&priv->mutex);
- return -ENOBUFS;
- }
-
ath9k_htc_ps_wakeup(priv);
memset(&hvif, 0, sizeof(struct ath9k_htc_target_vif));
memcpy(&hvif.myaddr, vif->addr, ETH_ALEN);
--
1.7.0.4
From: Mohammed Shafi Shajakhan <[email protected]>
This will allow us to create virtual interface the driver supports.
Also this ensures multivif support and limitation advertised
by the driver is taken care in cfg80211 itself.
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index d98255e..5ecf128 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -694,6 +694,20 @@ err_hw:
return ret;
}
+static const struct ieee80211_iface_limit if_limits[] = {
+ { .max = 2, .types = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) },
+ { .max = 2, .types = BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) },
+};
+
+static const struct ieee80211_iface_combination if_comb = {
+ .limits = if_limits,
+ .n_limits = ARRAY_SIZE(if_limits),
+ .max_interfaces = 2,
+ .num_different_channels = 1,
+};
+
static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
struct ieee80211_hw *hw)
{
@@ -716,6 +730,9 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_CLIENT);
+ hw->wiphy->iface_combinations = &if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN |
--
1.7.0.4