Several of the rtlwifi family of drivers show warnings when W=1 is added to
the make command. This set of patches fixes all ot them. None of them are
serious and they may be applied to some future kernel.
Signed-off-by: Larry Finger <[email protected]>
---
Larry Finger (6):
rtlwifi: Fix many compile warnings when using W=1
rtlwifi: Fix warnings in usb.c
rtlwifi: rtl8192c: Fix W=1 warning
rtlwifi: rtl8192cu: Fix W=1 build warning
rtlwifi: rtl8192de: Fix W=1 build warnings
rtlwifi: rtl8723ae: Fix W=1 compile warnings
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 3 ++-
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8192de/dm.c | 4 ++--
drivers/net/wireless/rtlwifi/rtl8723ae/fw.c | 2 --
drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c | 2 --
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 8 ++------
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c | 20 ++------------------
drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 2 --
drivers/net/wireless/rtlwifi/usb.c | 4 ----
drivers/net/wireless/rtlwifi/wifi.h | 2 +-
10 files changed, 10 insertions(+), 39 deletions(-)
--
1.8.1
Building this driver with "make W=1" results in the following 2 warnings:
drivers/net/wireless/rtlwifi/usb.c:829:21: warning: variable ‘urb_list’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/usb.c:828:23: warning: variable ‘skb_list’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Larry Finger <[email protected]>
---
drivers/net/wireless/rtlwifi/usb.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 1535efd..d42bbe2 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -825,8 +825,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
u32 ep_num;
struct urb *_urb = NULL;
struct sk_buff *_skb = NULL;
- struct sk_buff_head *skb_list;
- struct usb_anchor *urb_list;
WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl);
if (unlikely(IS_USB_STOP(rtlusb))) {
@@ -836,7 +834,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
return;
}
ep_num = rtlusb->ep_map.ep_mapping[qnum];
- skb_list = &rtlusb->tx_skb_queue[ep_num];
_skb = skb;
_urb = _rtl_usb_tx_urb_setup(hw, _skb, ep_num);
if (unlikely(!_urb)) {
@@ -844,7 +841,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
"Can't allocate urb. Drop skb!\n");
return;
}
- urb_list = &rtlusb->tx_pending[ep_num];
_rtl_submit_tx_urb(hw, _urb);
}
--
1.8.1
when this driver is built with "make W=1", the following warning is printed:
drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1058:5: warning: comparison is always false due to limited range of data type [-Wtype-limits]
Signed-off-by: Larry Finger <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192de/dm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
index fd8df23..5251fb8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c
@@ -841,9 +841,9 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter(
long ele_a = 0, ele_d, temp_cck, val_x, value32;
long val_y, ele_c = 0;
u8 ofdm_index[2];
- u8 cck_index = 0;
+ s8 cck_index = 0;
u8 ofdm_index_old[2];
- u8 cck_index_old = 0;
+ s8 cck_index_old = 0;
u8 index;
int i;
bool is2t = IS_92D_SINGLEPHY(rtlhal->version);
--
1.8.1
On Fri, 2013-02-01 at 10:40 -0600, Larry Finger wrote:
> Several of the rtlwifi family of drivers show warnings when W=1 is added to
> the make command. This set of patches fixes all ot them. None of them are
> serious and they may be applied to some future kernel.
Do these really need fixing?
I think Linus' email from awhile back is still reasonable.
https://lkml.org/lkml/2007/2/9/183
Whe this driver is built with "make W=1", the following warnings are output:
drivers/net/wireless/rtlwifi/rtl8723ae/fw.c:515:5: warning: variable ‘own’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c:1436:5: warning: variable ‘bt_retry_cnt’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:706:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:2033:41: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:620:23: warning: variable ‘radiob_arraylen’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:619:7: warning: variable ‘radiob_array_table’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:617:7: warning: variable ‘rtstatus’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1534:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1716:6: warning: variable ‘reg_ecc’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:61: warning: variable ‘reg_ec4’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:34: warning: variable ‘reg_eac’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/rtlwifi/rtl8723ae/trx.c:247:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Larry Finger <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8723ae/fw.c | 2 --
drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c | 2 --
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 8 ++------
drivers/net/wireless/rtlwifi/rtl8723ae/phy.c | 20 ++------------------
drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 2 --
5 files changed, 4 insertions(+), 30 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c
index 3b71dab..35cb8f8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c
@@ -512,7 +512,6 @@ static bool _rtl8723ae_cmd_send_packet(struct ieee80211_hw *hw,
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl8192_tx_ring *ring;
struct rtl_tx_desc *pdesc;
- u8 own;
unsigned long flags;
struct sk_buff *pskb = NULL;
@@ -525,7 +524,6 @@ static bool _rtl8723ae_cmd_send_packet(struct ieee80211_hw *hw,
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
pdesc = &ring->desc[0];
- own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc, true, HW_DESC_OWN);
rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *) pdesc, 1, 1, skb);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
index 887d521..68c2834 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c
@@ -1433,7 +1433,6 @@ static void _rtl8723ae_dm_bt_coexist_2_ant(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
- u8 bt_retry_cnt;
u8 bt_info_original;
RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_DMESG,
"[BTCoex] Get bt info by fw!!\n");
@@ -1445,7 +1444,6 @@ static void _rtl8723ae_dm_bt_coexist_2_ant(struct ieee80211_hw *hw)
"[BTCoex] c2h for btInfo not rcvd yet!!\n");
}
- bt_retry_cnt = rtlhal->hal_coex_8723.bt_retry_cnt;
bt_info_original = rtlhal->hal_coex_8723.c2h_bt_info_original;
/* when bt inquiry or page scan, we have to set h2c 0x25
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index 0a8c038..1498048 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -703,11 +703,9 @@ static void _rtl8723ae_hw_configure(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
u8 reg_bw_opmode;
- u32 reg_ratr, reg_prsr;
+ u32 reg_prsr;
reg_bw_opmode = BW_OPMODE_20MHZ;
- reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
- RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
reg_prsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8);
@@ -2030,7 +2028,7 @@ bool rtl8723ae_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct rtl_phy *rtlphy = &(rtlpriv->phy);
- enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate;
+ enum rf_pwrstate e_rfpowerstate_toset;
u8 u1tmp;
bool actuallyset = false;
@@ -2049,8 +2047,6 @@ bool rtl8723ae_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
spin_unlock(&rtlpriv->locks.rf_ps_lock);
}
- cur_rfstate = ppsc->rfpwr_state;
-
rtl_write_byte(rtlpriv, REG_GPIO_IO_SEL_2,
rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL_2)&~(BIT(1)));
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
index 3d8536b..eafbb18 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c
@@ -614,17 +614,11 @@ bool rtl8723ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
int i;
- bool rtstatus = true;
u32 *radioa_array_table;
- u32 *radiob_array_table;
- u16 radioa_arraylen, radiob_arraylen;
+ u16 radioa_arraylen;
radioa_arraylen = Rtl8723ERADIOA_1TARRAYLENGTH;
radioa_array_table = RTL8723E_RADIOA_1TARRAY;
- radiob_arraylen = RTL8723E_RADIOB_1TARRAYLENGTH;
- radiob_array_table = RTL8723E_RADIOB_1TARRAY;
-
- rtstatus = true;
switch (rfpath) {
case RF90_PATH_A:
@@ -1531,11 +1525,8 @@ static void _rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw,
0x522, 0x550, 0x551, 0x040
};
const u32 retrycount = 2;
- u32 bbvalue;
if (t == 0) {
- bbvalue = rtl_get_bbreg(hw, 0x800, MASKDWORD);
-
phy_save_adda_regs(hw, adda_reg, rtlphy->adda_backup, 16);
phy_save_mac_regs(hw, iqk_mac_reg, rtlphy->iqk_mac_backup);
}
@@ -1712,8 +1703,7 @@ void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery)
long result[4][8];
u8 i, final_candidate;
bool patha_ok, pathb_ok;
- long reg_e94, reg_e9c, reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4,
- reg_ecc, reg_tmp = 0;
+ long reg_e94, reg_e9c, reg_ea4, reg_eb4, reg_ebc, reg_tmp = 0;
bool is12simular, is13simular, is23simular;
bool start_conttx = false, singletone = false;
u32 iqk_bb_reg[10] = {
@@ -1780,21 +1770,15 @@ void rtl8723ae_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery)
reg_e94 = result[i][0];
reg_e9c = result[i][1];
reg_ea4 = result[i][2];
- reg_eac = result[i][3];
reg_eb4 = result[i][4];
reg_ebc = result[i][5];
- reg_ec4 = result[i][6];
- reg_ecc = result[i][7];
}
if (final_candidate != 0xff) {
rtlphy->reg_e94 = reg_e94 = result[final_candidate][0];
rtlphy->reg_e9c = reg_e9c = result[final_candidate][1];
reg_ea4 = result[final_candidate][2];
- reg_eac = result[final_candidate][3];
rtlphy->reg_eb4 = reg_eb4 = result[final_candidate][4];
rtlphy->reg_ebc = reg_ebc = result[final_candidate][5];
- reg_ec4 = result[final_candidate][6];
- reg_ecc = result[final_candidate][7];
patha_ok = pathb_ok = true;
} else {
rtlphy->reg_e94 = rtlphy->reg_eb4 = 0x100;
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
index ce8ad12..b1fd2b3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
@@ -244,7 +244,6 @@ static void _rtl8723ae_translate_rx_signal_stuff(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr;
u8 *tmp_buf;
u8 *praddr;
- u8 *psaddr;
__le16 fc;
u16 type;
bool packet_matchbssid, packet_toself, packet_beacon = false;
@@ -255,7 +254,6 @@ static void _rtl8723ae_translate_rx_signal_stuff(struct ieee80211_hw *hw,
fc = hdr->frame_control;
type = WLAN_FC_GET_TYPE(fc);
praddr = hdr->addr1;
- psaddr = ieee80211_get_SA(hdr);
packet_matchbssid = ((IEEE80211_FTYPE_CTL != type) &&
(!compare_ether_addr(mac->bssid,
--
1.8.1
When this driver is built with "make W=1", the following warning is output:
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c:56:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Larry Finger <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index b7e6607..d9e659f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -76,7 +76,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
GFP_KERNEL, hw, rtl_fw_cb);
- return 0;
+ return err;
}
static void rtl92cu_deinit_sw_vars(struct ieee80211_hw *hw)
--
1.8.1
When this driver is built with "make W=1", the following warning occurs:
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:907:4: warning: comparison is always false due to limited range of data type [-Wtype-limits]
Signed-off-by: Larry Finger <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
index 1cdf5a2..b793a65 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
@@ -669,7 +669,8 @@ static void rtl92c_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw
u8 thermalvalue, delta, delta_lck, delta_iqk;
long ele_a, ele_d, temp_cck, val_x, value32;
long val_y, ele_c = 0;
- u8 ofdm_index[2], cck_index = 0, ofdm_index_old[2], cck_index_old = 0;
+ u8 ofdm_index[2], ofdm_index_old[2], cck_index_old = 0;
+ s8 cck_index = 0;
int i;
bool is2t = IS_92C_SERIAL(rtlhal->version);
s8 txpwr_level[2] = {0, 0};
--
1.8.1
Many warnings like the following arise from a build with W=1 on the
make line:
warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Changing the overall debug level storage from unsigned to signed fixes these.
Signed-off-by: Larry Finger <[email protected]>
---
drivers/net/wireless/rtlwifi/wifi.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 21a5f4f..f13258a 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1702,7 +1702,7 @@ struct rtl_works {
struct rtl_debug {
u32 dbgp_type[DBGP_TYPE_MAX];
- u32 global_debuglevel;
+ int global_debuglevel;
u64 global_debugcomponents;
/* add for proc debug */
--
1.8.1