This modest number of patches fixes issues found during testing of
AP mode that were introduced couple of kernel releases back. Better
fixing it late than never. Even more so for the download fix.
This series is intended for v3.9 kernel. The patches apply to the master
branch in the wireless repository.
Franky Lin (1):
brcmfmac: do not proceed if fail to download nvram to dongle
Hante Meuleman (3):
brcmfmac: fix tkip mic tx/rx ap swap bug.
brcmfmac: fix stopping AP.
brcmfmac: fix returning cipher_suite for get_key operation.
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 6 +--
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 46 +++++++++++---------
2 files changed, 28 insertions(+), 24 deletions(-)
--
1.7.10.4
From: Hante Meuleman <[email protected]>
on stop_ap the dongle was not properly shutdown. As a result it was
not possible to restart AP or STA after AP operation without
restarting the device. This patch will fix that.
Reviewed-by: Arend Van Spriel <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Piotr Haber <[email protected]>
Signed-off-by: Hante Meuleman <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
---
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 25 ++++++++++++--------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 3bc47ea..b9dbf2c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3827,8 +3827,9 @@ exit:
static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
{
struct brcmf_if *ifp = netdev_priv(ndev);
- s32 err = -EPERM;
+ s32 err;
struct brcmf_fil_bss_enable_le bss_enable;
+ struct brcmf_join_params join_params;
brcmf_dbg(TRACE, "Enter\n");
@@ -3836,16 +3837,21 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
/* Due to most likely deauths outstanding we sleep */
/* first to make sure they get processed by fw. */
msleep(400);
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
- if (err < 0) {
- brcmf_err("setting AP mode failed %d\n", err);
- goto exit;
- }
+
+ memset(&join_params, 0, sizeof(join_params));
+ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
+ &join_params, sizeof(join_params));
+ if (err < 0)
+ brcmf_err("SET SSID error (%d)\n", err);
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0);
- if (err < 0) {
+ if (err < 0)
brcmf_err("BRCMF_C_UP error %d\n", err);
- goto exit;
- }
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
+ if (err < 0)
+ brcmf_err("setting AP mode failed %d\n", err);
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 0);
+ if (err < 0)
+ brcmf_err("setting INFRA mode failed %d\n", err);
} else {
bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx);
bss_enable.enable = cpu_to_le32(0);
@@ -3858,7 +3864,6 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
-exit:
return err;
}
--
1.7.10.4
From: Franky Lin <[email protected]>
Nvram contains critical initialization parameter for firmware to run. Host
driver should not proceed if nvram fails to be downloaded to dongle.
Reviewed-by: Piotr Haber <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Signed-off-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
---
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 4469321..35fc68b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3317,15 +3317,15 @@ static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
goto err;
}
- /* External image takes precedence if specified */
if (brcmf_sdbrcm_download_code_file(bus)) {
brcmf_err("dongle image file download failed\n");
goto err;
}
- /* External nvram takes precedence if specified */
- if (brcmf_sdbrcm_download_nvram(bus))
+ if (brcmf_sdbrcm_download_nvram(bus)) {
brcmf_err("dongle nvram file download failed\n");
+ goto err;
+ }
/* Take arm out of reset */
if (brcmf_sdbrcm_download_state(bus, false)) {
--
1.7.10.4
From: Hante Meuleman <[email protected]>
tx and rx michael tkip keys are always swapped in case being
configured per mac. This is wrong for AP. The swap should only
be done for STA mode.
Reviewed-by: Arend Van Spriel <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Piotr Haber <[email protected]>
Signed-off-by: Hante Meuleman <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
---
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 2af9c0f..3bc47ea 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1891,8 +1891,10 @@ static s32
brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
u8 key_idx, const u8 *mac_addr, struct key_params *params)
{
+ struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_wsec_key key;
s32 err = 0;
+ u8 keybuf[8];
memset(&key, 0, sizeof(key));
key.index = (u32) key_idx;
@@ -1916,8 +1918,9 @@ brcmf_add_keyext(struct wiphy *wiphy, struct net_device *ndev,
brcmf_dbg(CONN, "Setting the key index %d\n", key.index);
memcpy(key.data, params->key, key.len);
- if (params->cipher == WLAN_CIPHER_SUITE_TKIP) {
- u8 keybuf[8];
+ if ((ifp->vif->mode != WL_MODE_AP) &&
+ (params->cipher == WLAN_CIPHER_SUITE_TKIP)) {
+ brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
memcpy(keybuf, &key.data[24], sizeof(keybuf));
memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
memcpy(&key.data[16], keybuf, sizeof(keybuf));
@@ -2013,7 +2016,7 @@ brcmf_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
break;
case WLAN_CIPHER_SUITE_TKIP:
if (ifp->vif->mode != WL_MODE_AP) {
- brcmf_dbg(CONN, "Swapping key\n");
+ brcmf_dbg(CONN, "Swapping RX/TX MIC key\n");
memcpy(keybuf, &key.data[24], sizeof(keybuf));
memcpy(&key.data[24], &key.data[16], sizeof(keybuf));
memcpy(&key.data[16], keybuf, sizeof(keybuf));
--
1.7.10.4
From: Hante Meuleman <[email protected]>
When multiple cipher suites have been programmed then the lowest
suite is to be retured. This fixes issue when AP mode is using
CCMP and TKIP WPA combination where rekeying will fail.
Reviewed-by: Arend Van Spriel <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Piotr Haber <[email protected]>
Signed-off-by: Hante Meuleman <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
---
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index b9dbf2c..ec46fff 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -2121,8 +2121,7 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
err = -EAGAIN;
goto done;
}
- switch (wsec & ~SES_OW_ENABLED) {
- case WEP_ENABLED:
+ if (wsec & WEP_ENABLED) {
sec = &profile->sec;
if (sec->cipher_pairwise & WLAN_CIPHER_SUITE_WEP40) {
params.cipher = WLAN_CIPHER_SUITE_WEP40;
@@ -2131,16 +2130,13 @@ brcmf_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
params.cipher = WLAN_CIPHER_SUITE_WEP104;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_WEP104\n");
}
- break;
- case TKIP_ENABLED:
+ } else if (wsec & TKIP_ENABLED) {
params.cipher = WLAN_CIPHER_SUITE_TKIP;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_TKIP\n");
- break;
- case AES_ENABLED:
+ } else if (wsec & AES_ENABLED) {
params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
- break;
- default:
+ } else {
brcmf_err("Invalid algo (0x%x)\n", wsec);
err = -EINVAL;
goto done;
--
1.7.10.4