2013-05-14 01:18:29

by Bing Zhao

Subject: [PATCH] Bluetooth: btmrvl: support Marvell Bluetooth device SD8897

The register offsets have been changed in SD8897 and newer chips.
Define a new btmrvl_sdio_card_reg map for SD88xx.

Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: Frank Huang <[email protected]>
---
drivers/bluetooth/Kconfig | 4 ++--
drivers/bluetooth/btmrvl_sdio.c | 28 ++++++++++++++++++++++++++++
2 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index fdfd61a..11a6104 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -201,7 +201,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.

This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688/8787/8797.
+ Marvell Bluetooth devices, such as 8688/8787/8797/8897.

Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -214,7 +214,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.

This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently SD8688/SD8787/SD8797
+ devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
chipsets are supported.

Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index c63488c..13693b7 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
.io_port_2 = 0x7a,
};

+static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
+ .cfg = 0x00,
+ .host_int_mask = 0x02,
+ .host_intstatus = 0x03,
+ .card_status = 0x50,
+ .sq_read_base_addr_a0 = 0x60,
+ .sq_read_base_addr_a1 = 0x61,
+ .card_revision = 0xbc,
+ .card_fw_status0 = 0xc0,
+ .card_fw_status1 = 0xc1,
+ .card_rx_len = 0xc2,
+ .card_rx_unit = 0xc3,
+ .io_port_0 = 0xd8,
+ .io_port_1 = 0xd9,
+ .io_port_2 = 0xda,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
@@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.sd_blksz_fw_dl = 256,
};

+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8897_uapsta.bin",
+ .reg = &btmrvl_reg_88xx,
+ .sd_blksz_fw_dl = 256,
+};
+
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8797 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+ /* Marvell SD8897 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8897 },

{ } /* Terminating entry */
};
@@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
--
1.8.2.3

2013-05-20 20:57:32

by Gustavo Padovan

Subject: Re: [PATCH] Bluetooth: btmrvl: support Marvell Bluetooth device SD8897

Hi Bing,

* Bing Zhao <[email protected]> [2013-05-13 18:15:32 -0700]:

> The register offsets have been changed in SD8897 and newer chips.
> Define a new btmrvl_sdio_card_reg map for SD88xx.
>
> Signed-off-by: Bing Zhao <[email protected]>
> Signed-off-by: Frank Huang <[email protected]>
> ---
> drivers/bluetooth/Kconfig | 4 ++--
> drivers/bluetooth/btmrvl_sdio.c | 28 ++++++++++++++++++++++++++++
> 2 files changed, 30 insertions(+), 2 deletions(-)

Patch has been applied to bluetooth.git. Thanks.

Gustavo