Do not subtract spur power from noise floor on this chip, as it can lead
to packet loss and other connectivity issues.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 2bf6548..e1714d7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -334,7 +334,8 @@ static void ar9003_hw_spur_ofdm(struct ath_hw *ah,
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1);
- if (REG_READ_FIELD(ah, AR_PHY_MODE,
+ if (!AR_SREV_9340(ah) &&
+ REG_READ_FIELD(ah, AR_PHY_MODE,
AR_PHY_MODE_DYNAMIC) == 0x1)
REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1);
--
1.8.0.2
AR934x v1.3 no longer needs the DCU backoff reduction workaround for
preventing rx overruns, but in turn needs the number of usable Tx
buffers to be reduced slightly.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.c | 15 ++++++++++-----
drivers/net/wireless/ath/ath9k/mac.c | 2 +-
drivers/net/wireless/ath/ath9k/reg.h | 9 +++++++++
3 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 40331f4..2caf7de 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan)
static inline void ath9k_hw_set_dma(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
+ int txbuf_size;
ENABLE_REGWRITE_BUFFER(ah);
@@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah)
* So set the usable tx buf size also to half to
* avoid data/delimiter underruns
*/
- REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
- AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
- } else if (!AR_SREV_9271(ah)) {
- REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
- AR_PCU_TXBUF_CTRL_USABLE_SIZE);
+ txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE;
+ } else if (AR_SREV_9340_13_OR_LATER(ah)) {
+ /* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */
+ txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE;
+ } else {
+ txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE;
}
+ if (!AR_SREV_9271(ah))
+ REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size);
+
REGWRITE_BUFFER_FLUSH(ah);
if (AR_SREV_9300_20_OR_LATER(ah))
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 498fee0..566109a 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ);
- if (AR_SREV_9340(ah))
+ if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah))
REG_WRITE(ah, AR_DMISC(q),
AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1);
else
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 9c056a8..f7c90cc 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -798,6 +798,10 @@
#define AR_SREV_REVISION_9485_10 0
#define AR_SREV_REVISION_9485_11 1
#define AR_SREV_VERSION_9340 0x300
+#define AR_SREV_REVISION_9340_10 0
+#define AR_SREV_REVISION_9340_11 1
+#define AR_SREV_REVISION_9340_12 2
+#define AR_SREV_REVISION_9340_13 3
#define AR_SREV_VERSION_9580 0x1C0
#define AR_SREV_REVISION_9580_10 4 /* AR9580 1.0 */
#define AR_SREV_VERSION_9462 0x280
@@ -897,6 +901,10 @@
#define AR_SREV_9340(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340))
+#define AR_SREV_9340_13_OR_LATER(_ah) \
+ (AR_SREV_9340((_ah)) && \
+ ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9340_13))
+
#define AR_SREV_9285E_20(_ah) \
(AR_SREV_9285_12_OR_LATER(_ah) && \
((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1))
@@ -1883,6 +1891,7 @@ enum {
#define AR_PCU_TXBUF_CTRL_SIZE_MASK 0x7FF
#define AR_PCU_TXBUF_CTRL_USABLE_SIZE 0x700
#define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE 0x380
+#define AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE 0x500
#define AR_PCU_MISC_MODE2 0x8344
#define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002
--
1.8.0.2
If a local bus timeout has been detected, the host interface needs to be
reset to clear the errors. AR934x uses a different synchronous interrupt
bit to indicate this, so the check needs to be fixed.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.c | 10 +++++++---
drivers/net/wireless/ath/ath9k/reg.h | 2 ++
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index a263ccc..40331f4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1306,9 +1306,13 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET;
} else {
tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE);
- if (tmpReg &
- (AR_INTR_SYNC_LOCAL_TIMEOUT |
- AR_INTR_SYNC_RADM_CPL_TIMEOUT)) {
+ if (AR_SREV_9340(ah))
+ tmpReg &= AR9340_INTR_SYNC_LOCAL_TIMEOUT;
+ else
+ tmpReg &= AR_INTR_SYNC_LOCAL_TIMEOUT |
+ AR_INTR_SYNC_RADM_CPL_TIMEOUT;
+
+ if (tmpReg) {
u32 val;
REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 5c4ab50..9c056a8 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1007,6 +1007,8 @@ enum {
AR_INTR_SYNC_LOCAL_TIMEOUT |
AR_INTR_SYNC_MAC_SLEEP_ACCESS),
+ AR9340_INTR_SYNC_LOCAL_TIMEOUT = 0x00000010,
+
AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF,
};
--
1.8.0.2