Atheros chipsets certified for DFS (currently AR_SREV_VERSION_9580)
also support HT40 DFS mode. This patch series provides handling of
radar pulses reported for primary and extension channels and
sets small knobs in the detector and interface-combinations to
enable operating on HT40 DFS channels.
Zefir Kurtisi (3):
ath9k: restart only triggering DFS detector line
ath9k: add DFS support for extension channel
ath9k: allow 40MHz radar detection width
drivers/net/wireless/ath/ath9k/dfs.c | 44 ++++++++++++++++---------
drivers/net/wireless/ath/ath9k/init.c | 3 +-
drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
3 files changed, 32 insertions(+), 17 deletions(-)
--
1.9.1
> To support HT40 DFS mode, a triggering detector must
> reset only itself but not other detector lines.
>
> Signed-off-by: Zefir Kurtisi <[email protected]>
Thanks, 3 patches applied to wireless-drivers-next.git:
8252a35ab4f6 ath9k: restart only triggering DFS detector line
58766977ad12 ath9k: add DFS support for extension channel
387f149a2ace ath9k: allow 40MHz radar detection width
Kalle Valo
To support HT40 DFS mode, a triggering detector must
reset only itself but not other detector lines.
Signed-off-by: Zefir Kurtisi <[email protected]>
---
drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index 3d57f87..c657ca2 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -289,7 +289,7 @@ dpd_add_pulse(struct dfs_pattern_detector *dpd, struct pulse_event *event)
"count=%d, count_false=%d\n",
event->freq, pd->rs->type_id,
ps->pri, ps->count, ps->count_falses);
- channel_detector_reset(dpd, cd);
+ pd->reset(pd, dpd->last_pulse_ts);
return true;
}
}
--
1.9.1
In HT40 modes, pulse events on primary and extension
channel are processed individually. If valid, a pulse
event will be fed into the detector
* for primary frequency, or
* for extension frequency (+/-20MHz based on HT40-mode)
* or both
With that, a 40MHz radar will result in two individual
radar events.
Signed-off-by: Zefir Kurtisi <[email protected]>
---
drivers/net/wireless/ath/ath9k/dfs.c | 44 ++++++++++++++++++++++++------------
1 file changed, 29 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/dfs.c b/drivers/net/wireless/ath/ath9k/dfs.c
index 726271c..e98a9ea 100644
--- a/drivers/net/wireless/ath/ath9k/dfs.c
+++ b/drivers/net/wireless/ath/ath9k/dfs.c
@@ -126,8 +126,19 @@ ath9k_postprocess_radar_event(struct ath_softc *sc,
DFS_STAT_INC(sc, pulses_detected);
return true;
}
-#undef PRI_CH_RADAR_FOUND
-#undef EXT_CH_RADAR_FOUND
+
+static void
+ath9k_dfs_process_radar_pulse(struct ath_softc *sc, struct pulse_event *pe)
+{
+ struct dfs_pattern_detector *pd = sc->dfs_detector;
+ DFS_STAT_INC(sc, pulses_processed);
+ if (pd == NULL)
+ return;
+ if (!pd->add_pulse(pd, pe))
+ return;
+ DFS_STAT_INC(sc, radar_detected);
+ ieee80211_radar_detected(sc->hw);
+}
/*
* DFS: check PHY-error for radar pulse and feed the detector
@@ -176,18 +187,21 @@ void ath9k_dfs_process_phyerr(struct ath_softc *sc, void *data,
ard.pulse_length_pri = vdata_end[-3];
pe.freq = ah->curchan->channel;
pe.ts = mactime;
- if (ath9k_postprocess_radar_event(sc, &ard, &pe)) {
- struct dfs_pattern_detector *pd = sc->dfs_detector;
- ath_dbg(common, DFS,
- "ath9k_dfs_process_phyerr: channel=%d, ts=%llu, "
- "width=%d, rssi=%d, delta_ts=%llu\n",
- pe.freq, pe.ts, pe.width, pe.rssi,
- pe.ts - sc->dfs_prev_pulse_ts);
- sc->dfs_prev_pulse_ts = pe.ts;
- DFS_STAT_INC(sc, pulses_processed);
- if (pd != NULL && pd->add_pulse(pd, &pe)) {
- DFS_STAT_INC(sc, radar_detected);
- ieee80211_radar_detected(sc->hw);
- }
+ if (!ath9k_postprocess_radar_event(sc, &ard, &pe))
+ return;
+
+ ath_dbg(common, DFS,
+ "ath9k_dfs_process_phyerr: type=%d, freq=%d, ts=%llu, "
+ "width=%d, rssi=%d, delta_ts=%llu\n",
+ ard.pulse_bw_info, pe.freq, pe.ts, pe.width, pe.rssi,
+ pe.ts - sc->dfs_prev_pulse_ts);
+ sc->dfs_prev_pulse_ts = pe.ts;
+ if (ard.pulse_bw_info & PRI_CH_RADAR_FOUND)
+ ath9k_dfs_process_radar_pulse(sc, &pe);
+ if (ard.pulse_bw_info & EXT_CH_RADAR_FOUND) {
+ pe.freq += IS_CHAN_HT40PLUS(ah->curchan) ? 20 : -20;
+ ath9k_dfs_process_radar_pulse(sc, &pe);
}
}
+#undef PRI_CH_RADAR_FOUND
+#undef EXT_CH_RADAR_FOUND
--
1.9.1
Signed-off-by: Zefir Kurtisi <[email protected]>
---
drivers/net/wireless/ath/ath9k/init.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 6c6e884..bfa4ff6 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -763,7 +763,8 @@ static const struct ieee80211_iface_combination if_comb[] = {
.num_different_channels = 1,
.beacon_int_infra_match = true,
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
- BIT(NL80211_CHAN_WIDTH_20),
+ BIT(NL80211_CHAN_WIDTH_20) |
+ BIT(NL80211_CHAN_WIDTH_40),
}
#endif
};
--
1.9.1