From: Sujith Manoharan <[email protected]>
More support for AIC, for -next.
Sujith Manoharan (4):
ath9k: Handle MCI_STATE_AIC_CAL_RESET
ath9k: Handle MCI_STATE_AIC_START
ath9k: Handle MCI_STATE_AIC_CAL
ath9k: Start AIC calibration during MCI reset
drivers/net/wireless/ath/ath9k/ar9003_aic.c | 69 ++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath9k/ar9003_aic.h | 3 ++
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 15 +++++++
3 files changed, 85 insertions(+), 2 deletions(-)
--
2.3.1
From: Sujith Manoharan <[email protected]>
This patch adds a function to handle the
MCI message MCI_STATE_AIC_START.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_aic.c | 33 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/ar9003_aic.h | 1 +
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++++
3 files changed, 38 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index 4e8cf08..5b4f818 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -18,6 +18,7 @@
#include "hw-ops.h"
#include "ar9003_mci.h"
#include "ar9003_aic.h"
+#include "ar9003_phy.h"
#include "reg_aic.h"
static const u8 com_att_db_table[ATH_AIC_MAX_COM_ATT_DB_TABLE] = {
@@ -512,6 +513,38 @@ exit:
}
+u8 ar9003_aic_start_normal(struct ath_hw *ah)
+{
+ struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
+ int16_t i;
+
+ if (aic->aic_cal_state != AIC_CAL_STATE_DONE)
+ return 1;
+
+ ar9003_aic_gain_table(ah);
+
+ REG_WRITE(ah, AR_PHY_AIC_SRAM_ADDR_B1, ATH_AIC_SRAM_AUTO_INCREMENT);
+
+ for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
+ REG_WRITE(ah, AR_PHY_AIC_SRAM_DATA_B1, aic->aic_sram[i]);
+ }
+
+ /* FIXME: Replace these with proper register names */
+ REG_WRITE(ah, 0xa6b0, 0x80);
+ REG_WRITE(ah, 0xa6b4, 0x5b2df0);
+ REG_WRITE(ah, 0xa6b8, 0x10762cc8);
+ REG_WRITE(ah, 0xa6bc, 0x1219a4b);
+ REG_WRITE(ah, 0xa6c0, 0x1e01);
+ REG_WRITE(ah, 0xb6b4, 0xf0);
+ REG_WRITE(ah, 0xb6c0, 0x1e01);
+ REG_WRITE(ah, 0xb6b0, 0x81);
+ REG_WRITE(ah, AR_PHY_65NM_CH1_RXTX4, 0x40000000);
+
+ aic->aic_enabled = true;
+
+ return 0;
+}
+
u8 ar9003_aic_cal_reset(struct ath_hw *ah)
{
struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index 5e48710..1ee5a8c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -53,6 +53,7 @@ struct ath_aic_out_info {
struct ath_aic_sram_info sram;
};
+u8 ar9003_aic_start_normal(struct ath_hw *ah);
u8 ar9003_aic_cal_reset(struct ath_hw *ah);
u8 ar9003_aic_calibration_single(struct ath_hw *ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index d6ed628..b559d75 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1363,6 +1363,10 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
mci->need_flush_btinfo = false;
break;
+ case MCI_STATE_AIC_START:
+ if (ath9k_hw_is_aic_enabled(ah))
+ ar9003_aic_start_normal(ah);
+ break;
case MCI_STATE_AIC_CAL_RESET:
if (ath9k_hw_is_aic_enabled(ah))
value = ar9003_aic_cal_reset(ah);
--
2.3.1
From: Sujith Manoharan <[email protected]>
Add a routine to handle the MCI_STATE_AIC_CAL_RESET
message.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_aic.c | 8 ++++++++
drivers/net/wireless/ath/ath9k/ar9003_aic.h | 1 +
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++++
3 files changed, 13 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index 7bdbc7a..4e8cf08 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -512,6 +512,14 @@ exit:
}
+u8 ar9003_aic_cal_reset(struct ath_hw *ah)
+{
+ struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
+
+ aic->aic_cal_state = AIC_CAL_STATE_IDLE;
+ return aic->aic_cal_state;
+}
+
u8 ar9003_aic_calibration_single(struct ath_hw *ah)
{
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index 9651bcd..5e48710 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -53,6 +53,7 @@ struct ath_aic_out_info {
struct ath_aic_sram_info sram;
};
+u8 ar9003_aic_cal_reset(struct ath_hw *ah);
u8 ar9003_aic_calibration_single(struct ath_hw *ah);
#endif /* AR9003_AIC_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 6fa98e5..d6ed628 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1363,6 +1363,10 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
mci->need_flush_btinfo = false;
break;
+ case MCI_STATE_AIC_CAL_RESET:
+ if (ath9k_hw_is_aic_enabled(ah))
+ value = ar9003_aic_cal_reset(ah);
+ break;
case MCI_STATE_AIC_CAL_SINGLE:
if (ath9k_hw_is_aic_enabled(ah))
value = ar9003_aic_calibration_single(ah);
--
2.3.1
From: Sujith Manoharan <[email protected]>
Add the main AIC calibration function to
handle MCI_STATE_AIC_CAL.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_aic.c | 28 ++++++++++++++++++++++++++--
drivers/net/wireless/ath/ath9k/ar9003_aic.h | 1 +
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++++
3 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index 5b4f818..1db119d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -162,7 +162,7 @@ static void ar9003_aic_gain_table(struct ath_hw *ah)
}
}
-static void ar9003_aic_cal_start(struct ath_hw *ah, u8 min_valid_count)
+static u8 ar9003_aic_cal_start(struct ath_hw *ah, u8 min_valid_count)
{
struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
int i;
@@ -257,6 +257,8 @@ static void ar9003_aic_cal_start(struct ath_hw *ah, u8 min_valid_count)
aic->aic_caled_chan = 0;
aic->aic_cal_state = AIC_CAL_STATE_STARTED;
+
+ return aic->aic_cal_state;
}
static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
@@ -513,6 +515,28 @@ exit:
}
+u8 ar9003_aic_calibration(struct ath_hw *ah)
+{
+ struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
+ u8 cal_ret = AIC_CAL_STATE_ERROR;
+
+ switch (aic->aic_cal_state) {
+ case AIC_CAL_STATE_IDLE:
+ cal_ret = ar9003_aic_cal_start(ah, 1);
+ break;
+ case AIC_CAL_STATE_STARTED:
+ cal_ret = ar9003_aic_cal_continue(ah, false);
+ break;
+ case AIC_CAL_STATE_DONE:
+ cal_ret = AIC_CAL_STATE_DONE;
+ break;
+ default:
+ break;
+ }
+
+ return cal_ret;
+}
+
u8 ar9003_aic_start_normal(struct ath_hw *ah)
{
struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
@@ -561,7 +585,7 @@ u8 ar9003_aic_calibration_single(struct ath_hw *ah)
num_chan = MS(mci_hw->config, ATH_MCI_CONFIG_AIC_CAL_NUM_CHAN);
- ar9003_aic_cal_start(ah, num_chan);
+ (void) ar9003_aic_cal_start(ah, num_chan);
cal_ret = ar9003_aic_cal_continue(ah, true);
return cal_ret;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index 1ee5a8c..509d1f5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -53,6 +53,7 @@ struct ath_aic_out_info {
struct ath_aic_sram_info sram;
};
+u8 ar9003_aic_calibration(struct ath_hw *ah);
u8 ar9003_aic_start_normal(struct ath_hw *ah);
u8 ar9003_aic_cal_reset(struct ath_hw *ah);
u8 ar9003_aic_calibration_single(struct ath_hw *ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index b559d75..cdd83d4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1363,6 +1363,10 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
mci->need_flush_btinfo = false;
break;
+ case MCI_STATE_AIC_CAL:
+ if (ath9k_hw_is_aic_enabled(ah))
+ value = ar9003_aic_calibration(ah);
+ break;
case MCI_STATE_AIC_START:
if (ath9k_hw_is_aic_enabled(ah))
ar9003_aic_start_normal(ah);
--
2.3.1
From: Sujith Manoharan <[email protected]>
When a MCI reset is done, make sure that AIC
is started.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index cdd83d4..af5ee41 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1017,6 +1017,9 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
if (en_int)
ar9003_mci_enable_interrupt(ah);
+ if (ath9k_hw_is_aic_enabled(ah))
+ ar9003_aic_start_normal(ah);
+
return 0;
}
--
2.3.1