Introducing a new feature that the driver can use to
indicate the driver/firmware supports configuration of BSS
selection criteria upon CONNECT command. This can be useful
when multiple BSS-es are found belonging to the same ESS,
ie. Infra-BSS with same SSID. The criteria can then be used to
offload selection of a preferred BSS.
Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Franky (Zhenhui) Lin <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Lei Zhang <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
---
V7:
- add validatioin using nla_ok().
V8:
- use IEEE80211_NUM_BANDS.
- add NESTED policy for NL80211_ATTR_BSS_SELECT.
- add braces in for loop.
---
include/net/cfg80211.h | 34 ++++++++++++++
include/uapi/linux/nl80211.h | 51 +++++++++++++++++++++
net/wireless/core.c | 4 ++
net/wireless/nl80211.c | 106 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 195 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9e1b24c..1dfb890 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1857,6 +1857,33 @@ struct cfg80211_ibss_params {
};
/**
+ * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment.
+ *
+ * @band: band of BSS which should match for RSSI level adjustment.
+ * @delta: value of RSSI level adjustment.
+ */
+struct cfg80211_bss_select_adjust {
+ enum nl80211_band band;
+ s8 delta;
+};
+
+/**
+ * struct cfg80211_bss_selection - connection parameters for BSS selection.
+ *
+ * @behaviour: requested BSS selection behaviour.
+ * @param: parameters for requestion behaviour.
+ * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF.
+ * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST.
+ */
+struct cfg80211_bss_selection {
+ enum nl80211_bss_select_attr behaviour;
+ union {
+ enum nl80211_band band_pref;
+ struct cfg80211_bss_select_adjust adjust;
+ } param;
+};
+
+/**
* struct cfg80211_connect_params - Connection parameters
*
* This structure provides information needed to complete IEEE 802.11
@@ -1893,6 +1920,7 @@ struct cfg80211_ibss_params {
* @vht_capa_mask: The bits of vht_capa which are to be used.
* @pbss: if set, connect to a PCP instead of AP. Valid for DMG
* networks.
+ * @bss_select: criteria to be used for BSS selection.
*/
struct cfg80211_connect_params {
struct ieee80211_channel *channel;
@@ -1916,6 +1944,7 @@ struct cfg80211_connect_params {
struct ieee80211_vht_cap vht_capa;
struct ieee80211_vht_cap vht_capa_mask;
bool pbss;
+ struct cfg80211_bss_selection bss_select;
};
/**
@@ -3184,6 +3213,9 @@ struct wiphy_vendor_command {
* low rssi when a frame is heard on different channel, then it should set
* this variable to the maximal offset for which it can compensate.
* This value should be set in MHz.
+ * @bss_select_support: bitmask indicating the BSS selection criteria supported
+ * by the driver in the .connect() callback. The bit position maps to the
+ * attribute indices defined in &enum nl80211_bss_select_attr.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -3306,6 +3338,8 @@ struct wiphy {
u8 max_num_csa_counters;
u8 max_adj_channel_rssi_comp;
+ u32 bss_select_support;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 7758969..ca59c27 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1793,6 +1793,12 @@ enum nl80211_commands {
* in a PBSS. Specified in %NL80211_CMD_CONNECT to request
* connecting to a PCP, and in %NL80211_CMD_START_AP to start
* a PCP instead of AP. Relevant for DMG networks only.
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
+ * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
+ * attributes according &enum nl80211_bss_select_attr to indicate what
+ * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
+ * it contains the behaviour-specific attribute containing the parameters for
+ * BSS selection to be done by driver and/or firmware.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2169,6 +2175,7 @@ enum nl80211_attrs {
NL80211_ATTR_SCHED_SCAN_PLANS,
NL80211_ATTR_PBSS,
+ NL80211_ATTR_BSS_SELECT,
/* add attributes here, update the policy in nl80211.c */
@@ -4657,4 +4664,48 @@ enum nl80211_sched_scan_plan {
__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
};
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment.
+ * @delta: value used to adjust the RSSI value of matching BSS.
+ */
+struct nl80211_bss_select_rssi_adjust {
+ enum nl80211_band band;
+ __s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ * is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ * selection should be done such that the specified band is preferred.
+ * When there are multiple BSS-es in the preferred band, the driver
+ * shall use RSSI-based BSS selection as a second step. The value of
+ * this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+ __NL80211_BSS_SELECT_ATTR_INVALID,
+ NL80211_BSS_SELECT_ATTR_RSSI,
+ NL80211_BSS_SELECT_ATTR_BAND_PREF,
+ NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+ /* keep last */
+ __NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+ NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 3a9c41b..1177ec6 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -626,6 +626,10 @@ int wiphy_register(struct wiphy *wiphy)
!rdev->ops->set_mac_acl)))
return -EINVAL;
+ if (WARN_ON(wiphy->bss_select_support &&
+ (wiphy->bss_select_support & ~(BIT(__NL80211_BSS_SELECT_ATTR_AFTER_LAST) - 2))))
+ return -EINVAL;
+
if (wiphy->addresses)
memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 268cb49..2124ed0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -402,6 +402,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
[NL80211_ATTR_PBSS] = { .type = NLA_FLAG },
+ [NL80211_ATTR_BSS_SELECT] = { .type = NLA_NESTED },
};
/* policy for the key attributes */
@@ -486,6 +487,15 @@ nl80211_plan_policy[NL80211_SCHED_SCAN_PLAN_MAX + 1] = {
[NL80211_SCHED_SCAN_PLAN_ITERATIONS] = { .type = NLA_U32 },
};
+static const struct nla_policy
+nl80211_bss_select_policy[NL80211_BSS_SELECT_ATTR_MAX + 1] = {
+ [NL80211_BSS_SELECT_ATTR_RSSI] = { .type = NLA_FLAG },
+ [NL80211_BSS_SELECT_ATTR_BAND_PREF] = { .type = NLA_U32 },
+ [NL80211_BSS_SELECT_ATTR_RSSI_ADJUST] = {
+ .len = sizeof(struct nl80211_bss_select_rssi_adjust)
+ },
+};
+
static int nl80211_prepare_wdev_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct cfg80211_registered_device **rdev,
@@ -1731,6 +1741,24 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
rdev->wiphy.ext_features))
goto nla_put_failure;
+ if (rdev->wiphy.bss_select_support) {
+ struct nlattr *nested;
+ u32 bss_select_support = rdev->wiphy.bss_select_support;
+
+ nested = nla_nest_start(msg, NL80211_ATTR_BSS_SELECT);
+ if (!nested)
+ goto nla_put_failure;
+
+ i = 0;
+ while (bss_select_support) {
+ if ((bss_select_support & 1) &&
+ nla_put_flag(msg, i))
+ goto nla_put_failure;
+ i++;
+ bss_select_support >>= 1;
+ }
+ nla_nest_end(msg, nested);
+ }
/* done */
state->split_start = 0;
break;
@@ -5758,6 +5786,69 @@ static int validate_scan_freqs(struct nlattr *freqs)
return n_channels;
}
+static bool is_band_valid(struct wiphy *wiphy, enum nl80211_band b)
+{
+ return b < IEEE80211_NUM_BANDS && wiphy->bands[b];
+}
+
+static int parse_bss_select(struct nlattr *nla, struct wiphy *wiphy,
+ struct cfg80211_bss_selection *bss_select)
+{
+ struct nlattr *attr[NL80211_BSS_SELECT_ATTR_MAX + 1];
+ struct nlattr *nest;
+ int err;
+ bool found = false;
+ int i;
+
+ /* only process one nested attribute */
+ nest = nla_data(nla);
+ if (!nla_ok(nest, nla_len(nest)))
+ return -EINVAL;
+
+ err = nla_parse(attr, NL80211_BSS_SELECT_ATTR_MAX, nla_data(nest),
+ nla_len(nest), nl80211_bss_select_policy);
+ if (err)
+ return err;
+
+ /* only one attribute may be given */
+ for (i = 0; i <= NL80211_BSS_SELECT_ATTR_MAX; i++) {
+ if (attr[i]) {
+ if (found)
+ return -EINVAL;
+ found = true;
+ }
+ }
+
+ bss_select->behaviour = __NL80211_BSS_SELECT_ATTR_INVALID;
+
+ if (attr[NL80211_BSS_SELECT_ATTR_RSSI])
+ bss_select->behaviour = NL80211_BSS_SELECT_ATTR_RSSI;
+
+ if (attr[NL80211_BSS_SELECT_ATTR_BAND_PREF]) {
+ bss_select->behaviour = NL80211_BSS_SELECT_ATTR_BAND_PREF;
+ bss_select->param.band_pref =
+ nla_get_u32(attr[NL80211_BSS_SELECT_ATTR_BAND_PREF]);
+ if (!is_band_valid(wiphy, bss_select->param.band_pref))
+ return -EINVAL;
+ }
+ if (attr[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST]) {
+ struct nl80211_bss_select_rssi_adjust *adj_param;
+
+ adj_param = nla_data(attr[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST]);
+ bss_select->behaviour = NL80211_BSS_SELECT_ATTR_RSSI_ADJUST;
+ bss_select->param.adjust.band = adj_param->band;
+ bss_select->param.adjust.delta = adj_param->delta;
+ if (!is_band_valid(wiphy, bss_select->param.adjust.band))
+ return -EINVAL;
+ }
+
+ /* user-space did not provide behaviour attribute */
+ if (bss_select->behaviour == __NL80211_BSS_SELECT_ATTR_INVALID)
+ return -EINVAL;
+
+ return 0;
+}
+
static int nl80211_parse_random_mac(struct nlattr **attrs,
u8 *mac_addr, u8 *mac_addr_mask)
{
@@ -7991,6 +8082,21 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
return -EOPNOTSUPP;
}
+ /* only do bss selection when no BSSID is specified. */
+ if (!connect.bssid && wiphy->bss_select_support &&
+ info->attrs[NL80211_ATTR_BSS_SELECT]) {
+ err = parse_bss_select(info->attrs[NL80211_ATTR_BSS_SELECT],
+ wiphy, &connect.bss_select);
+ if (err) {
+ kzfree(connkeys);
+ return err;
+ }
+ if (!(wiphy->bss_select_support & BIT(connect.bss_select.behaviour))) {
+ kzfree(connkeys);
+ return -EINVAL;
+ }
+ }
+
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_connect(rdev, dev, &connect, connkeys, NULL);
wdev_unlock(dev->ieee80211_ptr);
--
1.9.1
Hi Arend,
[auto build test WARNING on mac80211-next/master]
[also build test WARNING on next-20160223]
[cannot apply to v4.5-rc5]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Arend-van-Spriel/nl80211-add-feature-for-BSS-selection-support/20160224-203113
base: https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git master
config: i386-randconfig-x003-201608 (attached as .config)
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All warnings (new ones prefixed by >>):
net/wireless/nl80211.c: In function 'is_band_valid':
>> net/wireless/nl80211.c:5791:11: warning: comparison between 'enum nl80211_band' and 'enum ieee80211_band' [-Wenum-compare]
return b < IEEE80211_NUM_BANDS && wiphy->bands[b];
^
vim +5791 net/wireless/nl80211.c
5775 * and don't require drivers to check that the
5776 * channel list they get isn't longer than what
5777 * they can scan, as long as they can scan all
5778 * the channels they registered at once.
5779 */
5780 nla_for_each_nested(attr2, freqs, tmp2)
5781 if (attr1 != attr2 &&
5782 nla_get_u32(attr1) == nla_get_u32(attr2))
5783 return 0;
5784 }
5785
5786 return n_channels;
5787 }
5788
5789 static bool is_band_valid(struct wiphy *wiphy, enum nl80211_band b)
5790 {
> 5791 return b < IEEE80211_NUM_BANDS && wiphy->bands[b];
5792 }
5793
5794 static int parse_bss_select(struct nlattr *nla, struct wiphy *wiphy,
5795 struct cfg80211_bss_selection *bss_select)
5796 {
5797 struct nlattr *attr[NL80211_BSS_SELECT_ATTR_MAX + 1];
5798 struct nlattr *nest;
5799 int err;
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation