From: vamsi krishna <[email protected]>
Add support to use a random local address (Address 2 = TA in transmit
and the same address in receive functionality) for Public Action frames
in order to improve privacy of WLAN clients. Applications fill the
random transmit address in the frame buffer in the NL80211_CMD_FRAME
command. This can be used only with the drivers that indicate support
for random local address by setting the new
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA and/or
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED in ext_features.
The driver needs to configure receive behavior to accept frames to the
specified random address during the time the frame exchange is pending
and such frames need to be acknowledged similarly to frames sent to the
local permanent address when this random address functionality is not
used.
Signed-off-by: vamsi krishna <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
---
include/uapi/linux/nl80211.h | 6 ++++++
net/wireless/mlme.c | 21 +++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)
v3:
- moved to the beginning of the series since there were no pending
comments on this patch; no other changes
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 174f4b3..908886c 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4699,6 +4699,10 @@ enum nl80211_feature_flags {
* configuration (AP/mesh) with VHT rates.
* @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
* with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ * in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ * randomized TA in @NL80211_CMD_FRAME while associated.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4714,6 +4718,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_BEACON_RATE_HT,
NL80211_EXT_FEATURE_BEACON_RATE_VHT,
NL80211_EXT_FEATURE_FILS_STA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 1c63a77..b876f40 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -662,8 +662,25 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
return err;
}
- if (!ether_addr_equal(mgmt->sa, wdev_address(wdev)))
- return -EINVAL;
+ if (!ether_addr_equal(mgmt->sa, wdev_address(wdev))) {
+ /* Allow random TA to be used with Public Action frames if the
+ * driver has indicated support for this. Otherwise, only allow
+ * the local address to be used.
+ */
+ if (!ieee80211_is_action(mgmt->frame_control) ||
+ mgmt->u.action.category != WLAN_CATEGORY_PUBLIC)
+ return -EINVAL;
+ if (!wdev->current_bss &&
+ !wiphy_ext_feature_isset(
+ &rdev->wiphy,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA))
+ return -EINVAL;
+ if (wdev->current_bss &&
+ !wiphy_ext_feature_isset(
+ &rdev->wiphy,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED))
+ return -EINVAL;
+ }
/* Transmit the Action frame as requested by user space */
return rdev_mgmt_tx(rdev, wdev, params, cookie);
--
2.7.4
The function documentation for cfg80211_connect_bss() and
cfg80211_connect_result() was still claiming that they are used only for
a success case while these functions can now be used to report both
success and various failure cases. The actual use cases were already
described in the connect() documentation.
Update the function specific comments to note the failure cases and also
describe how the special status == -1 case is used in
cfg80211_connect_bss() to indicate a connection timeout based on the
internal implementation in cfg80211_connect_timeout().
Signed-off-by: Jouni Malinen <[email protected]>
---
include/net/cfg80211.h | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9b3427c..ed3d595 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5086,9 +5086,14 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
* @req_ie_len: association request IEs length
* @resp_ie: association response IEs (may be %NULL)
* @resp_ie_len: assoc response IEs length
- * @status: status code, 0 for successful connection, use
+ * @status: status code, %WLAN_STATUS_SUCCESS for successful connection, use
* %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
- * the real status code for failures.
+ * the real status code for failures. If this call is used to report a
+ * failure due to a timeout (e.g., not receiving an Authentication frame
+ * from the AP) instead of an explicit rejection by the AP, -1 is used to
+ * indicate that this is a failure, but without a status code.
+ * @timeout_reason is used to report the reason for the timeout in that
+ * case.
* @gfp: allocation flags
* @timeout_reason: reason for connection timeout. This is used when the
* connection fails due to a timeout instead of an explicit rejection from
@@ -5097,10 +5102,10 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
* failure is due to a timeout and not due to explicit rejection by the AP.
* This value is ignored in other cases (@status >= 0).
*
- * It should be called by the underlying driver whenever connect() has
- * succeeded. This is similar to cfg80211_connect_result(), but with the
- * option of identifying the exact bss entry for the connection. Only one of
- * these functions should be called.
+ * It should be called by the underlying driver once execution of the connection
+ * request from connect() has been completed. This is similar to
+ * cfg80211_connect_result(), but with the option of identifying the exact bss
+ * entry for the connection. Only one of these functions should be called.
*/
void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
struct cfg80211_bss *bss, const u8 *req_ie,
@@ -5117,13 +5122,15 @@ void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
* @req_ie_len: association request IEs length
* @resp_ie: association response IEs (may be %NULL)
* @resp_ie_len: assoc response IEs length
- * @status: status code, 0 for successful connection, use
+ * @status: status code, %WLAN_STATUS_SUCCESS for successful connection, use
* %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
* the real status code for failures.
* @gfp: allocation flags
*
- * It should be called by the underlying driver whenever connect() has
- * succeeded.
+ * It should be called by the underlying driver once execution of the connection
+ * request from connect() has been completed. This is similar to
+ * cfg80211_connect_bss() which allows the exact bss entry to be specified. Only
+ * one of these functions should be called.
*/
static inline void
cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
--
2.7.4
Thanks for the updates, I've applied all of these patches (with 2 very
minor modifications that I've documented in the commit logs)
johannes
From: vamsi krishna <[email protected]>
Enhance sched scan to support option of finding a better BSS while in
connected state. Firmware scans the medium and reports when it finds a
known BSS which has better RSSI than the current connected BSS. New
attributes to specify the relative RSSI (compared to the current BSS)
are added to the sched scan to implement this.
Signed-off-by: vamsi krishna <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
---
include/net/cfg80211.h | 36 +++++++++++++++++++++++++-----------
include/uapi/linux/nl80211.h | 30 ++++++++++++++++++++++++++++++
net/wireless/nl80211.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 99 insertions(+), 11 deletions(-)
v4:
- rebased on top of the random TA patch
- update comments to cover possibility of negative relative_rssi
- use NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST only if
NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI is present
- remove unnecessary nl80211_send_wowlan_nd() argument change
- remove invalid rssi_adjust.band comparison (different enum)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index cb13789..4456491 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1620,6 +1620,17 @@ struct cfg80211_sched_scan_plan {
};
/**
+ * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment.
+ *
+ * @band: band of BSS which should match for RSSI level adjustment.
+ * @delta: value of RSSI level adjustment.
+ */
+struct cfg80211_bss_select_adjust {
+ enum nl80211_band band;
+ s8 delta;
+};
+
+/**
* struct cfg80211_sched_scan_request - scheduled scan request description
*
* @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
@@ -1654,6 +1665,16 @@ struct cfg80211_sched_scan_plan {
* cycle. The driver may ignore this parameter and start
* immediately (or at any other time), if this feature is not
* supported.
+ * @relative_rssi_set: Indicates whether @relative_rssi is set or not.
+ * @relative_rssi: Relative RSSI threshold in dB to restrict scan result
+ * reporting in connected state to cases where a matching BSS is determined
+ * to have better or slightly worse RSSI than the current connected BSS.
+ * The relative RSSI threshold values are ignored in disconnected state.
+ * @rssi_adjust: delta dB of RSSI preference to be given to the BSSs that belong
+ * to the specified band while deciding whether a better BSS is reported
+ * using @relative_rssi. If delta is a negative number, the BSSs that
+ * belong to the specified band will be penalized by delta dB in relative
+ * comparisions.
*/
struct cfg80211_sched_scan_request {
struct cfg80211_ssid *ssids;
@@ -1673,6 +1694,10 @@ struct cfg80211_sched_scan_request {
u8 mac_addr[ETH_ALEN] __aligned(2);
u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+ bool relative_rssi_set;
+ s8 relative_rssi;
+ struct cfg80211_bss_select_adjust rssi_adjust;
+
/* internal */
struct wiphy *wiphy;
struct net_device *dev;
@@ -1981,17 +2006,6 @@ struct cfg80211_ibss_params {
};
/**
- * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment.
- *
- * @band: band of BSS which should match for RSSI level adjustment.
- * @delta: value of RSSI level adjustment.
- */
-struct cfg80211_bss_select_adjust {
- enum nl80211_band band;
- s8 delta;
-};
-
-/**
* struct cfg80211_bss_selection - connection parameters for BSS selection.
*
* @behaviour: requested BSS selection behaviour.
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 908886c..6b17feb 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1982,6 +1982,20 @@ enum nl80211_commands {
* @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
* used in various commands/events for specifying the BSSID.
*
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ * other BSSs has to be better or slightly worse than the current
+ * connected BSS so that they get reported to user space.
+ * This will give an opportunity to userspace to consider connecting to
+ * other matching BSSs which have better or slightly worse RSSI than
+ * the current connected BSS by using an offloaded operation to avoid
+ * unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ * the specified band is to be adjusted before doing
+ * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ * better BSSs. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2388,6 +2402,9 @@ enum nl80211_attrs {
NL80211_ATTR_BSSID,
+ NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+ NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3080,6 +3097,13 @@ enum nl80211_reg_rule_attr {
* how this API was implemented in the past. Also, due to the same problem,
* the only way to create a matchset with only an RSSI filter (with this
* attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ * relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3089,6 +3113,8 @@ enum nl80211_sched_scan_match_attr {
NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4703,6 +4729,9 @@ enum nl80211_feature_flags {
* in @NL80211_CMD_FRAME while not associated.
* @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
* randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ * for reporting BSSs with better RSSI than the current connected BSS
+ * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4720,6 +4749,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_FILS_STA,
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+ NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b378d0a..71c66ff 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -405,6 +405,10 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_FILS_NONCES] = { .len = 2 * FILS_NONCE_LEN },
[NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED] = { .type = NLA_FLAG, },
[NL80211_ATTR_BSSID] = { .len = ETH_ALEN },
+ [NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI] = { .type = NLA_S8 },
+ [NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST] = {
+ .len = sizeof(struct nl80211_bss_select_rssi_adjust)
+ },
};
/* policy for the key attributes */
@@ -6950,6 +6954,12 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
if (!n_plans || n_plans > wiphy->max_sched_scan_plans)
return ERR_PTR(-EINVAL);
+ if (!wiphy_ext_feature_isset(
+ wiphy, NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI) &&
+ (attrs[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI] ||
+ attrs[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST]))
+ return ERR_PTR(-EINVAL);
+
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->match_sets) * n_match_sets
@@ -7156,6 +7166,26 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
request->delay =
nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_DELAY]);
+ if (attrs[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI]) {
+ request->relative_rssi = nla_get_s8(
+ attrs[NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI]);
+ request->relative_rssi_set = true;
+ }
+
+ if (request->relative_rssi_set &&
+ attrs[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST]) {
+ struct nl80211_bss_select_rssi_adjust *rssi_adjust;
+
+ rssi_adjust = nla_data(
+ attrs[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST]);
+ request->rssi_adjust.band = rssi_adjust->band;
+ request->rssi_adjust.delta = rssi_adjust->delta;
+ if (!is_band_valid(wiphy, request->rssi_adjust.band)) {
+ err = -EINVAL;
+ goto out_free;
+ }
+ }
+
err = nl80211_parse_sched_scan_plans(wiphy, n_plans, request, attrs);
if (err)
goto out_free;
@@ -9692,6 +9722,20 @@ static int nl80211_send_wowlan_nd(struct sk_buff *msg,
if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_DELAY, req->delay))
return -ENOBUFS;
+ if (req->relative_rssi_set) {
+ struct nl80211_bss_select_rssi_adjust rssi_adjust;
+
+ if (nla_put_s8(msg, NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+ req->relative_rssi))
+ return -ENOBUFS;
+
+ rssi_adjust.band = req->rssi_adjust.band;
+ rssi_adjust.delta = req->rssi_adjust.delta;
+ if (nla_put(msg, NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+ sizeof(rssi_adjust), &rssi_adjust))
+ return -ENOBUFS;
+ }
+
freqs = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES);
if (!freqs)
return -ENOBUFS;
--
2.7.4
From: Purushottam Kushwaha <[email protected]>
This enhances the connect timeout API to also carry the reason for the
timeout. These reason codes for the connect time out are represented by
enum nl80211_timeout_reason and are passed to user space through a new
attribute NL80211_ATTR_TIMEOUT_REASON (u32).
Signed-off-by: Purushottam Kushwaha <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
---
include/net/cfg80211.h | 18 ++++++++++++++----
include/uapi/linux/nl80211.h | 21 +++++++++++++++++++++
net/wireless/core.h | 4 +++-
net/wireless/mlme.c | 3 ++-
net/wireless/nl80211.c | 8 ++++++--
net/wireless/nl80211.h | 3 ++-
net/wireless/sme.c | 39 +++++++++++++++++++++++++++------------
net/wireless/util.c | 2 +-
8 files changed, 76 insertions(+), 22 deletions(-)
v2:
- update cfg80211_connect_bss() comment to note that timeout_reason
gets ignored for status >= 0
- rename CFG80211_CONN_AUTH_FAILED to CFG80211_CONN_AUTH_FAILED_TIMEOUT
to be consistent with association (which needs both
failure-due-to-reject and failure-due-to-timeout)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4456491..9b3427c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5090,6 +5090,12 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
* %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
* the real status code for failures.
* @gfp: allocation flags
+ * @timeout_reason: reason for connection timeout. This is used when the
+ * connection fails due to a timeout instead of an explicit rejection from
+ * the AP. %NL80211_TIMEOUT_UNSPECIFIED is used when the timeout reason is
+ * not known. This value is used only if @status < 0 to indicate that the
+ * failure is due to a timeout and not due to explicit rejection by the AP.
+ * This value is ignored in other cases (@status >= 0).
*
* It should be called by the underlying driver whenever connect() has
* succeeded. This is similar to cfg80211_connect_result(), but with the
@@ -5099,7 +5105,8 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
struct cfg80211_bss *bss, const u8 *req_ie,
size_t req_ie_len, const u8 *resp_ie,
- size_t resp_ie_len, int status, gfp_t gfp);
+ size_t resp_ie_len, int status, gfp_t gfp,
+ enum nl80211_timeout_reason timeout_reason);
/**
* cfg80211_connect_result - notify cfg80211 of connection result
@@ -5125,7 +5132,8 @@ cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
u16 status, gfp_t gfp)
{
cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, resp_ie,
- resp_ie_len, status, gfp);
+ resp_ie_len, status, gfp,
+ NL80211_TIMEOUT_UNSPECIFIED);
}
/**
@@ -5136,6 +5144,7 @@ cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
* @req_ie: association request IEs (maybe be %NULL)
* @req_ie_len: association request IEs length
* @gfp: allocation flags
+ * @timeout_reason: reason for connection timeout.
*
* It should be called by the underlying driver whenever connect() has failed
* in a sequence where no explicit authentication/association rejection was
@@ -5145,10 +5154,11 @@ cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
*/
static inline void
cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid,
- const u8 *req_ie, size_t req_ie_len, gfp_t gfp)
+ const u8 *req_ie, size_t req_ie_len, gfp_t gfp,
+ enum nl80211_timeout_reason timeout_reason)
{
cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, NULL, 0, -1,
- gfp);
+ gfp, timeout_reason);
}
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 6b17feb..c51b40c 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1996,6 +1996,10 @@ enum nl80211_commands {
* better BSSs. The attribute value is a packed structure
* value as specified by &struct nl80211_bss_select_rssi_adjust.
*
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ * e.g., with %NL80211_CMD_CONNECT event.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2405,6 +2409,8 @@ enum nl80211_attrs {
NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+ NL80211_ATTR_TIMEOUT_REASON,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -4789,6 +4795,21 @@ enum nl80211_connect_failed_reason {
};
/**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+ NL80211_TIMEOUT_UNSPECIFIED,
+ NL80211_TIMEOUT_SCAN,
+ NL80211_TIMEOUT_AUTH,
+ NL80211_TIMEOUT_ASSOC,
+};
+
+/**
* enum nl80211_scan_flags - scan request control flags
*
* Scan request control flags are used to control the handling
diff --git a/net/wireless/core.h b/net/wireless/core.h
index ba42055..58ca206 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -228,6 +228,7 @@ struct cfg80211_event {
size_t resp_ie_len;
struct cfg80211_bss *bss;
int status; /* -1 = failed; 0..65535 = status code */
+ enum nl80211_timeout_reason timeout_reason;
} cr;
struct {
const u8 *req_ie;
@@ -388,7 +389,8 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
int status, bool wextev,
- struct cfg80211_bss *bss);
+ struct cfg80211_bss *bss,
+ enum nl80211_timeout_reason timeout_reason);
void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
size_t ie_len, u16 reason, bool from_ap);
int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index b876f40..22b3d99 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -48,7 +48,8 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss,
/* update current_bss etc., consumes the bss reference */
__cfg80211_connect_result(dev, mgmt->bssid, NULL, 0, ie, len - ieoffs,
status_code,
- status_code == WLAN_STATUS_SUCCESS, bss);
+ status_code == WLAN_STATUS_SUCCESS, bss,
+ NL80211_TIMEOUT_UNSPECIFIED);
}
EXPORT_SYMBOL(cfg80211_rx_assoc_resp);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 71c66ff..eac8fa0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -409,6 +409,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST] = {
.len = sizeof(struct nl80211_bss_select_rssi_adjust)
},
+ [NL80211_ATTR_TIMEOUT_REASON] = { .type = NLA_U32 },
};
/* policy for the key attributes */
@@ -13231,7 +13232,8 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
- int status, gfp_t gfp)
+ int status, gfp_t gfp,
+ enum nl80211_timeout_reason timeout_reason)
{
struct sk_buff *msg;
void *hdr;
@@ -13252,7 +13254,9 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
nla_put_u16(msg, NL80211_ATTR_STATUS_CODE,
status < 0 ? WLAN_STATUS_UNSPECIFIED_FAILURE :
status) ||
- (status < 0 && nla_put_flag(msg, NL80211_ATTR_TIMED_OUT)) ||
+ (status < 0 &&
+ (nla_put_flag(msg, NL80211_ATTR_TIMED_OUT) ||
+ nla_put_u32(msg, NL80211_ATTR_TIMEOUT_REASON, timeout_reason))) ||
(req_ie &&
nla_put(msg, NL80211_ATTR_REQ_IE, req_ie_len, req_ie)) ||
(resp_ie &&
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index 75f8252..633b3eb 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -56,7 +56,8 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
- int status, gfp_t gfp);
+ int status, gfp_t gfp,
+ enum nl80211_timeout_reason timeout_reason);
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 4669391..db5ab3ba8 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -34,10 +34,11 @@ struct cfg80211_conn {
CFG80211_CONN_SCAN_AGAIN,
CFG80211_CONN_AUTHENTICATE_NEXT,
CFG80211_CONN_AUTHENTICATING,
- CFG80211_CONN_AUTH_FAILED,
+ CFG80211_CONN_AUTH_FAILED_TIMEOUT,
CFG80211_CONN_ASSOCIATE_NEXT,
CFG80211_CONN_ASSOCIATING,
CFG80211_CONN_ASSOC_FAILED,
+ CFG80211_CONN_ASSOC_FAILED_TIMEOUT,
CFG80211_CONN_DEAUTH,
CFG80211_CONN_ABANDON,
CFG80211_CONN_CONNECTED,
@@ -140,7 +141,8 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev)
return err;
}
-static int cfg80211_conn_do_work(struct wireless_dev *wdev)
+static int cfg80211_conn_do_work(struct wireless_dev *wdev,
+ enum nl80211_timeout_reason *treason)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_connect_params *params;
@@ -171,7 +173,8 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev)
NULL, 0,
params->key, params->key_len,
params->key_idx, NULL, 0);
- case CFG80211_CONN_AUTH_FAILED:
+ case CFG80211_CONN_AUTH_FAILED_TIMEOUT:
+ *treason = NL80211_TIMEOUT_AUTH;
return -ENOTCONN;
case CFG80211_CONN_ASSOCIATE_NEXT:
if (WARN_ON(!rdev->ops->assoc))
@@ -198,6 +201,9 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev)
WLAN_REASON_DEAUTH_LEAVING,
false);
return err;
+ case CFG80211_CONN_ASSOC_FAILED_TIMEOUT:
+ *treason = NL80211_TIMEOUT_ASSOC;
+ /* fall through */
case CFG80211_CONN_ASSOC_FAILED:
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
@@ -223,6 +229,7 @@ void cfg80211_conn_work(struct work_struct *work)
container_of(work, struct cfg80211_registered_device, conn_work);
struct wireless_dev *wdev;
u8 bssid_buf[ETH_ALEN], *bssid = NULL;
+ enum nl80211_timeout_reason treason;
rtnl_lock();
@@ -244,10 +251,12 @@ void cfg80211_conn_work(struct work_struct *work)
memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
bssid = bssid_buf;
}
- if (cfg80211_conn_do_work(wdev)) {
+ treason = NL80211_TIMEOUT_UNSPECIFIED;
+ if (cfg80211_conn_do_work(wdev, &treason)) {
__cfg80211_connect_result(
wdev->netdev, bssid,
- NULL, 0, NULL, 0, -1, false, NULL);
+ NULL, 0, NULL, 0, -1, false, NULL,
+ treason);
}
wdev_unlock(wdev);
}
@@ -352,7 +361,8 @@ void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len)
} else if (status_code != WLAN_STATUS_SUCCESS) {
__cfg80211_connect_result(wdev->netdev, mgmt->bssid,
NULL, 0, NULL, 0,
- status_code, false, NULL);
+ status_code, false, NULL,
+ NL80211_TIMEOUT_UNSPECIFIED);
} else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) {
wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
schedule_work(&rdev->conn_work);
@@ -400,7 +410,7 @@ void cfg80211_sme_auth_timeout(struct wireless_dev *wdev)
if (!wdev->conn)
return;
- wdev->conn->state = CFG80211_CONN_AUTH_FAILED;
+ wdev->conn->state = CFG80211_CONN_AUTH_FAILED_TIMEOUT;
schedule_work(&rdev->conn_work);
}
@@ -422,7 +432,7 @@ void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev)
if (!wdev->conn)
return;
- wdev->conn->state = CFG80211_CONN_ASSOC_FAILED;
+ wdev->conn->state = CFG80211_CONN_ASSOC_FAILED_TIMEOUT;
schedule_work(&rdev->conn_work);
}
@@ -564,7 +574,9 @@ static int cfg80211_sme_connect(struct wireless_dev *wdev,
/* we're good if we have a matching bss struct */
if (bss) {
- err = cfg80211_conn_do_work(wdev);
+ enum nl80211_timeout_reason treason;
+
+ err = cfg80211_conn_do_work(wdev, &treason);
cfg80211_put_bss(wdev->wiphy, bss);
} else {
/* otherwise we'll need to scan for the AP first */
@@ -661,7 +673,8 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
int status, bool wextev,
- struct cfg80211_bss *bss)
+ struct cfg80211_bss *bss,
+ enum nl80211_timeout_reason timeout_reason)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *country_ie;
@@ -680,7 +693,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev,
bssid, req_ie, req_ie_len,
resp_ie, resp_ie_len,
- status, GFP_KERNEL);
+ status, GFP_KERNEL, timeout_reason);
#ifdef CONFIG_CFG80211_WEXT
if (wextev) {
@@ -771,7 +784,8 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
struct cfg80211_bss *bss, const u8 *req_ie,
size_t req_ie_len, const u8 *resp_ie,
- size_t resp_ie_len, int status, gfp_t gfp)
+ size_t resp_ie_len, int status, gfp_t gfp,
+ enum nl80211_timeout_reason timeout_reason)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
@@ -811,6 +825,7 @@ void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
cfg80211_hold_bss(bss_from_pub(bss));
ev->cr.bss = bss;
ev->cr.status = status;
+ ev->cr.timeout_reason = timeout_reason;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
diff --git a/net/wireless/util.c b/net/wireless/util.c
index cd8a7ae..1b92968 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -951,7 +951,7 @@ void cfg80211_process_wdev_events(struct wireless_dev *wdev)
ev->cr.resp_ie, ev->cr.resp_ie_len,
ev->cr.status,
ev->cr.status == WLAN_STATUS_SUCCESS,
- ev->cr.bss);
+ ev->cr.bss, ev->cr.timeout_reason);
break;
case EVENT_ROAMED:
__cfg80211_roamed(wdev, ev->rm.bss, ev->rm.req_ie,
--
2.7.4