2020-11-24 06:34:22

by Anilkumar Kolli

Subject: [PATCH v2] ath11k: add 64bit check before reading msi high addr

In QCN9074 ath11k boot, firmware crash is observed in 64-bit
builds and is due to wrong 64 bit MSI address size. This patch
fixes the firmware crash. Read msi high addr if 64-bit addresses
allowed on MSI.

Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2

Signed-off-by: Anilkumar Kolli <[email protected]>
---
V2:
- Fixes compilation issues

drivers/net/wireless/ath/ath11k/pci.c | 11 +++++++++--
drivers/net/wireless/ath/ath11k/pci.h | 1 +
2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index b75f47dc36de..54ac0a861063 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -264,13 +264,18 @@ int ath11k_pci_get_msi_irq(struct device *dev, unsigned int vector)
static void ath11k_pci_get_msi_address(struct ath11k_base *ab, u32 *msi_addr_lo,
u32 *msi_addr_hi)
{
+ struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
struct pci_dev *pci_dev = to_pci_dev(ab->dev);

pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_LO,
msi_addr_lo);

- pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_HI,
- msi_addr_hi);
+ if (test_bit(ATH11K_PCI_FLAG_IS_MSI_64, &ab_pci->flags)) {
+ pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_HI,
+ msi_addr_hi);
+ } else {
+ *msi_addr_hi = 0;
+ }
}

int ath11k_pci_get_user_msi_assignment(struct ath11k_pci *ab_pci, char *user_name,
@@ -658,6 +663,8 @@ static int ath11k_pci_enable_msi(struct ath11k_pci *ab_pci)
}

ab_pci->msi_ep_base_data = msi_desc->msg.data;
+ if (msi_desc->msi_attrib.is_64)
+ set_bit(ATH11K_PCI_FLAG_IS_MSI_64, &ab_pci->flags);

ath11k_dbg(ab, ATH11K_DBG_PCI, "msi base data is %d\n", ab_pci->msi_ep_base_data);

diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h
index 43562f774a37..9c503a17c237 100644
--- a/drivers/net/wireless/ath/ath11k/pci.h
+++ b/drivers/net/wireless/ath/ath11k/pci.h
@@ -38,6 +38,7 @@ struct ath11k_msi_config {

enum ath11k_pci_flags {
ATH11K_PCI_FLAG_INIT_DONE,
+ ATH11K_PCI_FLAG_IS_MSI_64,
};

struct ath11k_pci {
--
2.7.4

2020-12-07 16:10:28

by Kalle Valo

Subject: Re: [PATCH v2] ath11k: add 64bit check before reading msi high addr

Anilkumar Kolli <[email protected]> wrote:

> In QCN9074 ath11k boot, firmware crash is observed in 64-bit
> builds and is due to wrong 64 bit MSI address size. This patch
> fixes the firmware crash. Read msi high addr if 64-bit addresses
> allowed on MSI.
>
> Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2
>
> Signed-off-by: Anilkumar Kolli <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>

Patch applied to ath-next branch of ath.git, thanks.

e8e55d8919ea ath11k: add 64bit check before reading msi high addr

--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches