The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <[email protected]>
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 +-
drivers/net/wireless/ath/wil6210/wmi.c | 4 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 6 +-
drivers/net/wireless/rndis_wlan.c | 5 +-
.../staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 4 +-
drivers/staging/wlan-ng/cfg80211.c | 2 +-
include/net/cfg80211.h | 88 +++--
include/uapi/linux/nl80211.h | 5 +
net/wireless/mlme.c | 4 +-
net/wireless/nl80211.c | 120 +++++-
net/wireless/sme.c | 367 ++++++++++++++----
11 files changed, 482 insertions(+), 125 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 33ed54738d47..e11c7e9accc0 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -807,7 +807,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel,
cfg80211_put_bss(ar->wiphy, bss);
} else if (vif->sme_state == SME_CONNECTED) {
struct cfg80211_roam_info roam_info = {
- .bss = bss,
+ .links[0].bss = bss,
.req_ie = assoc_req_ie,
.req_ie_len = assoc_req_len,
.resp_ie = assoc_resp_ie,
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 98b4c189eecc..ea7bd403e706 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1822,8 +1822,8 @@ wmi_evt_reassoc_status(struct wil6210_vif *vif, int id, void *d, int len)
freq = ieee80211_channel_to_frequency(ch, NL80211_BAND_60GHZ);
memset(&info, 0, sizeof(info));
- info.channel = ieee80211_get_channel(wiphy, freq);
- info.bss = vif->bss;
+ info.links[0].channel = ieee80211_get_channel(wiphy, freq);
+ info.links[0].bss = vif->bss;
info.req_ie = assoc_req_ie;
info.req_ie_len = assoc_req_ie_len;
info.resp_ie = assoc_resp_ie;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index f6bd1510420c..ab0d24820a04 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6017,8 +6017,8 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
done:
kfree(buf);
- roam_info.channel = notify_channel;
- roam_info.bssid = profile->bssid;
+ roam_info.links[0].channel = notify_channel;
+ roam_info.links[0].bssid = profile->bssid;
roam_info.req_ie = conn_info->req_ie;
roam_info.req_ie_len = conn_info->req_ie_len;
roam_info.resp_ie = conn_info->resp_ie;
@@ -6061,7 +6061,7 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg,
} else {
conn_params.status = WLAN_STATUS_AUTH_TIMEOUT;
}
- conn_params.bssid = profile->bssid;
+ conn_params.links[0].bssid = profile->bssid;
conn_params.req_ie = conn_info->req_ie;
conn_params.req_ie_len = conn_info->req_ie_len;
conn_params.resp_ie = conn_info->resp_ie;
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index ff2448394a1e..05524291d60c 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2813,8 +2813,9 @@ static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
resp_ie_len, 0, GFP_KERNEL);
} else {
struct cfg80211_roam_info roam_info = {
- .channel = get_current_channel(usbdev, NULL),
- .bssid = bssid,
+ .links[0].channel =
+ get_current_channel(usbdev, NULL),
+ .links[0].bssid = bssid,
.req_ie = req_ie,
.req_ie_len = req_ie_len,
.resp_ie = resp_ie,
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
index 349aa3c4b668..cf35125b7891 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
@@ -450,8 +450,8 @@ void rtw_cfg80211_indicate_connect(struct adapter *padapter)
notify_channel = ieee80211_get_channel(wiphy, freq);
- roam_info.channel = notify_channel;
- roam_info.bssid = cur_network->network.mac_address;
+ roam_info.links[0].channel = notify_channel;
+ roam_info.links[0].bssid = cur_network->network.mac_address;
roam_info.req_ie =
pmlmepriv->assoc_req+sizeof(struct ieee80211_hdr_3addr)+2;
roam_info.req_ie_len =
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 7951bd63816f..fc7747b2b450 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -647,7 +647,7 @@ void prism2_disconnected(struct wlandevice *wlandev)
void prism2_roamed(struct wlandevice *wlandev)
{
struct cfg80211_roam_info roam_info = {
- .bssid = wlandev->bssid,
+ .links[0].bssid = wlandev->bssid,
};
cfg80211_roamed(wlandev->netdev, &roam_info, GFP_KERNEL);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 8b9d1d9c7ec4..afc7d3d3f4d9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2742,6 +2742,9 @@ struct cfg80211_auth_request {
* request (connect callback).
* @ASSOC_REQ_DISABLE_HE: Disable HE
* @ASSOC_REQ_DISABLE_EHT: Disable EHT
+ * @CONNECT_REQ_MLO_SUPPORT: Userspace indicates support for handling MLD links.
+ * Drivers shall disable MLO features for the current association if this
+ * flag is not set.
*/
enum cfg80211_assoc_req_flags {
ASSOC_REQ_DISABLE_HT = BIT(0),
@@ -2750,6 +2753,7 @@ enum cfg80211_assoc_req_flags {
CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3),
ASSOC_REQ_DISABLE_HE = BIT(4),
ASSOC_REQ_DISABLE_EHT = BIT(5),
+ CONNECT_REQ_MLO_SUPPORT = BIT(6),
};
/**
@@ -5737,12 +5741,13 @@ static inline void WARN_INVALID_LINK_ID(struct wireless_dev *wdev,
!(wdev->valid_links & BIT(link_id)));
}
-#define for_each_valid_link(wdev, link_id) \
- for (link_id = 0; \
- link_id < ((wdev)->valid_links ? ARRAY_SIZE((wdev)->links) : 1); \
- link_id++) \
- if (!(wdev)->valid_links || \
- ((wdev)->valid_links & BIT(link_id)))
+#define for_each_valid_link(link_info, link_id) \
+ for (link_id = 0; \
+ link_id < ((link_info)->valid_links ? \
+ ARRAY_SIZE((link_info)->links) : 1); \
+ link_id++) \
+ if (!(link_info)->valid_links || \
+ ((link_info)->valid_links & BIT(link_id)))
/**
* DOC: Utility functions
@@ -7253,13 +7258,6 @@ struct cfg80211_fils_resp_params {
* indicate that this is a failure, but without a status code.
* @timeout_reason is used to report the reason for the timeout in that
* case.
- * @bssid: The BSSID of the AP (may be %NULL)
- * @bss: Entry of bss to which STA got connected to, can be obtained through
- * cfg80211_get_bss() (may be %NULL). But it is recommended to store the
- * bss from the connect_request and hold a reference to it and return
- * through this param to avoid a warning if the bss is expired during the
- * connection, esp. for those drivers implementing connect op.
- * Only one parameter among @bssid and @bss needs to be specified.
* @req_ie: Association request IEs (may be %NULL)
* @req_ie_len: Association request IEs length
* @resp_ie: Association response IEs (may be %NULL)
@@ -7271,17 +7269,43 @@ struct cfg80211_fils_resp_params {
* not known. This value is used only if @status < 0 to indicate that the
* failure is due to a timeout and not due to explicit rejection by the AP.
* This value is ignored in other cases (@status >= 0).
+ * @valid_links: For MLO connection, BIT mask of the valid link ids. Otherwise
+ * zero.
+ * @ap_mld_addr: For MLO connection, MLD address of the AP. Otherwise %NULL.
+ * @links : For MLO connection, contains link info for the valid links indicated
+ * using @valid_links. For non-MLO connection, links[0] contains the
+ * connected AP info.
+ * @links.addr: For MLO connection, MAC address of the STA link. Otherwise
+ * %NULL.
+ * @links.bssid: For MLO connection, MAC address of the AP link. For non-MLO
+ * connection, links[0].bssid points to the BSSID of the AP (may be %NULL).
+ * @links.bss: For MLO connection, entry of bss to which STA link is connected
+ * to, can be obtained through cfg80211_get_bss() but may be %NULL for some
+ * valid links as scan results of all AP links may not be received.
+ * For non-MLO connection, links[0].bss points to entry of bss to which STA
+ * is connected to, can be obtained through cfg80211_get_bss() (may be
+ * %NULL). It is recommended to store the bss from the connect_request and
+ * hold a reference to it and return through this param to avoid a warning
+ * if the bss is expired during the connection, esp. for those drivers
+ * implementing connect op. Only one parameter among @bssid and @bss needs
+ * to be specified.
*/
struct cfg80211_connect_resp_params {
int status;
- const u8 *bssid;
- struct cfg80211_bss *bss;
const u8 *req_ie;
size_t req_ie_len;
const u8 *resp_ie;
size_t resp_ie_len;
struct cfg80211_fils_resp_params fils;
enum nl80211_timeout_reason timeout_reason;
+
+ const u8 *ap_mld_addr;
+ u16 valid_links;
+ struct {
+ const u8 *addr;
+ const u8 *bssid;
+ struct cfg80211_bss *bss;
+ } links[IEEE80211_MLD_MAX_NUM_LINKS];
};
/**
@@ -7351,8 +7375,8 @@ cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
memset(¶ms, 0, sizeof(params));
params.status = status;
- params.bssid = bssid;
- params.bss = bss;
+ params.links[0].bssid = bssid;
+ params.links[0].bss = bss;
params.req_ie = req_ie;
params.req_ie_len = req_ie_len;
params.resp_ie = resp_ie;
@@ -7423,24 +7447,42 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid,
/**
* struct cfg80211_roam_info - driver initiated roaming information
*
- * @channel: the channel of the new AP
- * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set)
- * @bssid: the BSSID of the new AP (may be %NULL if %bss is set)
* @req_ie: association request IEs (maybe be %NULL)
* @req_ie_len: association request IEs length
* @resp_ie: association response IEs (may be %NULL)
* @resp_ie_len: assoc response IEs length
* @fils: FILS related roaming information.
+ * @valid_links: For MLO roaming, BIT mask of the new valid links is set.
+ * Otherwise zero.
+ * @ap_mld_addr: For MLO roaming, MLD address of the new AP. Otherwise %NULL.
+ * @links : For MLO roaming, contains new link info for the valid links set in
+ * @valid_links. For non-MLO roaming, links[0] contains the new AP info.
+ * @links.addr: For MLO roaming, MAC address of the STA link. Otherwise %NULL.
+ * @links.bssid: For MLO roaming, MAC address of the new AP link. For non-MLO
+ * roaming, links[0].bssid points to the BSSID of the new AP. May be
+ * %NULL if %links.bss is set.
+ * @links.channel: the channel of the new AP.
+ * @links.bss: For MLO roaming, entry of new bss to which STA link got
+ * roamed. May be %NULL for some valid links since all AP link beacons
+ * might not have been available. For non-MLO connection, links[0].bss
+ * points to entry of bss to which STA got roamed (may be %NULL if
+ * %links.bssid is set)
*/
struct cfg80211_roam_info {
- struct ieee80211_channel *channel;
- struct cfg80211_bss *bss;
- const u8 *bssid;
const u8 *req_ie;
size_t req_ie_len;
const u8 *resp_ie;
size_t resp_ie_len;
struct cfg80211_fils_resp_params fils;
+
+ const u8 *ap_mld_addr;
+ u16 valid_links;
+ struct {
+ const u8 *addr;
+ const u8 *bssid;
+ struct ieee80211_channel *channel;
+ struct cfg80211_bss *bss;
+ } links[IEEE80211_MLD_MAX_NUM_LINKS];
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b8366ceb2639..0ca7745b25ae 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2683,6 +2683,10 @@ enum nl80211_commands {
* association request when used with NL80211_CMD_NEW_STATION). Can be set
* only if %NL80211_STA_FLAG_WME is set.
*
+ * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO
+ * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not
+ * included in NL80211_CMD_CONNECT drivers must not perform MLO connection.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3200,6 +3204,7 @@ enum nl80211_attrs {
NL80211_ATTR_MLO_LINKS,
NL80211_ATTR_MLO_LINK_ID,
+ NL80211_ATTR_MLO_SUPPORT,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index fab2d6206cdd..4fdd306ed87b 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -42,8 +42,8 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss,
memset(&cr, 0, sizeof(cr));
cr.status = (int)le16_to_cpu(mgmt->u.assoc_resp.status_code);
- cr.bssid = mgmt->bssid;
- cr.bss = bss;
+ cr.links[0].bssid = mgmt->bssid;
+ cr.links[0].bss = bss;
cr.req_ie = req_ies;
cr.req_ie_len = req_ies_len;
cr.resp_ie = resp_ie;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9c8bf1baf625..99ee74e7977d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -796,6 +796,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
NLA_POLICY_NESTED_ARRAY(nl80211_policy),
[NL80211_ATTR_MLO_LINK_ID] =
NLA_POLICY_RANGE(NLA_U8, 0, IEEE80211_MLD_MAX_NUM_LINKS),
+ [NL80211_ATTR_MLO_SUPPORT] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -11383,6 +11384,9 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
connect.flags |= CONNECT_REQ_EXTERNAL_AUTH_SUPPORT;
}
+ if (nla_get_flag(info->attrs[NL80211_ATTR_MLO_SUPPORT]))
+ connect.flags |= CONNECT_REQ_MLO_SUPPORT;
+
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_connect(rdev, dev, &connect, connkeys,
@@ -17134,10 +17138,29 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
{
struct sk_buff *msg;
void *hdr;
+ unsigned int link;
+ size_t link_info_size = 0;
+ const u8 *connected_addr = cr->valid_links ?
+ cr->ap_mld_addr : cr->links[0].bssid;
+
+ if (cr->valid_links) {
+ for_each_valid_link(cr, link) {
+ /* Nested attribute header */
+ link_info_size += NLA_HDRLEN;
+ /* Link ID */
+ link_info_size += nla_total_size(sizeof(u8));
+ link_info_size += cr->links[link].addr ?
+ nla_total_size(ETH_ALEN) : 0;
+ link_info_size += (cr->links[link].bssid ||
+ cr->links[link].bss) ?
+ nla_total_size(ETH_ALEN) : 0;
+ }
+ }
msg = nlmsg_new(100 + cr->req_ie_len + cr->resp_ie_len +
cr->fils.kek_len + cr->fils.pmk_len +
- (cr->fils.pmkid ? WLAN_PMKID_LEN : 0), gfp);
+ (cr->fils.pmkid ? WLAN_PMKID_LEN : 0) + link_info_size,
+ gfp);
if (!msg)
return;
@@ -17149,8 +17172,8 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
- (cr->bssid &&
- nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, cr->bssid)) ||
+ (connected_addr &&
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, connected_addr)) ||
nla_put_u16(msg, NL80211_ATTR_STATUS_CODE,
cr->status < 0 ? WLAN_STATUS_UNSPECIFIED_FAILURE :
cr->status) ||
@@ -17176,6 +17199,38 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
nla_put(msg, NL80211_ATTR_PMKID, WLAN_PMKID_LEN, cr->fils.pmkid)))))
goto nla_put_failure;
+ if (cr->valid_links) {
+ int i = 0;
+ struct nlattr *nested;
+
+ nested = nla_nest_start(msg, NL80211_ATTR_MLO_LINKS);
+ if (!nested)
+ goto nla_put_failure;
+
+ for_each_valid_link(cr, link) {
+ struct nlattr *nested_mlo_links;
+ const u8 *bssid = cr->links[link].bss ?
+ cr->links[link].bss->bssid :
+ cr->links[link].bssid;
+
+ nested_mlo_links = nla_nest_start(msg, i + 1);
+ if (!nested_mlo_links)
+ goto nla_put_failure;
+
+ if (nla_put_u8(msg, NL80211_ATTR_MLO_LINK_ID, link) ||
+ (bssid &&
+ nla_put(msg, NL80211_ATTR_BSSID, ETH_ALEN, bssid)) ||
+ (cr->links[link].addr &&
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN,
+ cr->links[link].addr)))
+ goto nla_put_failure;
+
+ nla_nest_end(msg, nested_mlo_links);
+ i++;
+ }
+ nla_nest_end(msg, nested);
+ }
+
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
@@ -17192,11 +17247,32 @@ void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
{
struct sk_buff *msg;
void *hdr;
- const u8 *bssid = info->bss ? info->bss->bssid : info->bssid;
+ size_t link_info_size = 0;
+ unsigned int link;
+ const u8 *connected_addr = info->ap_mld_addr ?
+ info->ap_mld_addr :
+ (info->links[0].bss ?
+ info->links[0].bss->bssid :
+ info->links[0].bssid);
+
+ if (info->valid_links) {
+ for_each_valid_link(info, link) {
+ /* Nested attribute header */
+ link_info_size += NLA_HDRLEN;
+ /* Link ID */
+ link_info_size += nla_total_size(sizeof(u8));
+ link_info_size += info->links[link].addr ?
+ nla_total_size(ETH_ALEN) : 0;
+ link_info_size += (info->links[link].bssid ||
+ info->links[link].bss) ?
+ nla_total_size(ETH_ALEN) : 0;
+ }
+ }
msg = nlmsg_new(100 + info->req_ie_len + info->resp_ie_len +
info->fils.kek_len + info->fils.pmk_len +
- (info->fils.pmkid ? WLAN_PMKID_LEN : 0), gfp);
+ (info->fils.pmkid ? WLAN_PMKID_LEN : 0) +
+ link_info_size, gfp);
if (!msg)
return;
@@ -17208,7 +17284,7 @@ void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) ||
- nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid) ||
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, connected_addr) ||
(info->req_ie &&
nla_put(msg, NL80211_ATTR_REQ_IE, info->req_ie_len,
info->req_ie)) ||
@@ -17227,6 +17303,38 @@ void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
nla_put(msg, NL80211_ATTR_PMKID, WLAN_PMKID_LEN, info->fils.pmkid)))
goto nla_put_failure;
+ if (info->valid_links) {
+ int i = 0;
+ struct nlattr *nested;
+
+ nested = nla_nest_start(msg, NL80211_ATTR_MLO_LINKS);
+ if (!nested)
+ goto nla_put_failure;
+
+ for_each_valid_link(info, link) {
+ struct nlattr *nested_mlo_links;
+ const u8 *bssid = info->links[link].bss ?
+ info->links[link].bss->bssid :
+ info->links[link].bssid;
+
+ nested_mlo_links = nla_nest_start(msg, i + 1);
+ if (!nested_mlo_links)
+ goto nla_put_failure;
+
+ if (nla_put_u8(msg, NL80211_ATTR_MLO_LINK_ID, link) ||
+ (bssid &&
+ nla_put(msg, NL80211_ATTR_BSSID, ETH_ALEN, bssid)) ||
+ (info->links[link].addr &&
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN,
+ info->links[link].addr)))
+ goto nla_put_failure;
+
+ nla_nest_end(msg, nested_mlo_links);
+ i++;
+ }
+ nla_nest_end(msg, nested);
+ }
+
genlmsg_end(msg, hdr);
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 35602201057b..9e681e2f2db6 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -258,7 +258,7 @@ void cfg80211_conn_work(struct work_struct *work)
memset(&cr, 0, sizeof(cr));
cr.status = -1;
- cr.bssid = bssid;
+ cr.links[0].bssid = bssid;
cr.timeout_reason = treason;
__cfg80211_connect_result(wdev->netdev, &cr, false);
}
@@ -367,7 +367,7 @@ void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len)
memset(&cr, 0, sizeof(cr));
cr.status = status_code;
- cr.bssid = mgmt->bssid;
+ cr.links[0].bssid = mgmt->bssid;
cr.timeout_reason = NL80211_TIMEOUT_UNSPECIFIED;
__cfg80211_connect_result(wdev->netdev, &cr, false);
} else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) {
@@ -698,18 +698,39 @@ void __cfg80211_connect_result(struct net_device *dev,
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
+ unsigned int link;
+ const u8 *connected_addr;
+ bool bss_found = false;
+ bool self_link_addr_miss = false;
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) {
- cfg80211_put_bss(wdev->wiphy, cr->bss);
+ for_each_valid_link(cr, link)
+ cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
return;
}
+ if (cr->valid_links) {
+ for_each_valid_link(cr, link) {
+ if (!cr->links[link].addr) {
+ self_link_addr_miss = true;
+ break;
+ }
+ }
+
+ if (WARN_ON(!cr->ap_mld_addr || self_link_addr_miss)) {
+ for_each_valid_link(cr, link)
+ cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
+ return;
+ }
+ }
+
wdev->unprot_beacon_reported = 0;
nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev, cr,
GFP_KERNEL);
+ connected_addr = cr->valid_links ? cr->ap_mld_addr : cr->links[0].bssid;
#ifdef CONFIG_CFG80211_WEXT
if (wextev) {
@@ -729,23 +750,45 @@ void __cfg80211_connect_result(struct net_device *dev,
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
- if (cr->bssid && cr->status == WLAN_STATUS_SUCCESS) {
- memcpy(wrqu.ap_addr.sa_data, cr->bssid, ETH_ALEN);
- memcpy(wdev->wext.prev_bssid, cr->bssid, ETH_ALEN);
+ if (connected_addr && cr->status == WLAN_STATUS_SUCCESS) {
+ memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN);
+ memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN);
wdev->wext.prev_bssid_valid = true;
}
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
}
#endif
- if (!cr->bss && (cr->status == WLAN_STATUS_SUCCESS)) {
- WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect);
- cr->bss = cfg80211_get_bss(wdev->wiphy, NULL, cr->bssid,
- wdev->u.client.ssid, wdev->u.client.ssid_len,
- wdev->conn_bss_type,
- IEEE80211_PRIVACY_ANY);
- if (cr->bss)
- cfg80211_hold_bss(bss_from_pub(cr->bss));
+ if (cr->status == WLAN_STATUS_SUCCESS) {
+ /* at least one BSS must exist */
+ for_each_valid_link(cr, link) {
+ if (cr->links[link].bss)
+ break;
+ }
+
+ if ((!cr->valid_links && link == 1) ||
+ (cr->valid_links && link == ARRAY_SIZE(wdev->links)))
+ WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect);
+
+ for_each_valid_link(cr, link) {
+ if (cr->links[link].bss) {
+ bss_found = true;
+ continue;
+ }
+
+ cr->links[link].bss = cfg80211_get_bss(
+ wdev->wiphy, NULL,
+ cr->links[link].bssid,
+ wdev->u.client.ssid,
+ wdev->u.client.ssid_len,
+ wdev->conn_bss_type,
+ IEEE80211_PRIVACY_ANY);
+ if (cr->links[link].bss) {
+ cfg80211_hold_bss(
+ bss_from_pub(cr->links[link].bss));
+ bss_found = true;
+ }
+ }
}
cfg80211_wdev_release_bsses(wdev);
@@ -755,26 +798,57 @@ void __cfg80211_connect_result(struct net_device *dev,
wdev->connect_keys = NULL;
wdev->u.client.ssid_len = 0;
wdev->conn_owner_nlportid = 0;
- if (cr->bss) {
- cfg80211_unhold_bss(bss_from_pub(cr->bss));
- cfg80211_put_bss(wdev->wiphy, cr->bss);
+ for_each_valid_link(cr, link) {
+ if (!cr->links[link].bss)
+ continue;
+ cfg80211_unhold_bss(
+ bss_from_pub(cr->links[link].bss));
+ cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
}
cfg80211_sme_free(wdev);
return;
}
- if (WARN_ON(!cr->bss))
+ if (WARN_ON(!bss_found)) {
+ for_each_valid_link(cr, link) {
+ if (!cr->links[link].bss)
+ continue;
+ cfg80211_unhold_bss(
+ bss_from_pub(cr->links[link].bss));
+ cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
+ }
return;
+ }
- wdev->links[0].client.current_bss = bss_from_pub(cr->bss);
+ memset(wdev->links, 0, sizeof(wdev->links));
+ wdev->valid_links = cr->valid_links;
+ for_each_valid_link(cr, link) {
+ if (!cr->links[link].bss)
+ continue;
+
+ wdev->links[link].client.current_bss = bss_from_pub(
+ cr->links[link].bss);
+ }
wdev->connected = true;
- ether_addr_copy(wdev->u.client.connected_addr, cr->bss->bssid);
+ ether_addr_copy(wdev->u.client.connected_addr, connected_addr);
+ if (cr->valid_links)
+ for_each_valid_link(cr, link)
+ ether_addr_copy(wdev->links[link].addr,
+ cr->links[link].addr);
if (!(wdev->wiphy->flags & WIPHY_FLAG_HAS_STATIC_WEP))
cfg80211_upload_connect_keys(wdev);
rcu_read_lock();
- country_elem = ieee80211_bss_get_elem(cr->bss, WLAN_EID_COUNTRY);
+ for_each_valid_link(cr, link) {
+ if (!cr->links[link].bss)
+ continue;
+
+ country_elem = ieee80211_bss_get_elem(
+ cr->links[link].bss, WLAN_EID_COUNTRY);
+ if (country_elem)
+ break;
+ }
if (!country_elem) {
rcu_read_unlock();
return;
@@ -787,12 +861,55 @@ void __cfg80211_connect_result(struct net_device *dev,
if (!country_data)
return;
- regulatory_hint_country_ie(wdev->wiphy, cr->bss->channel->band,
+ regulatory_hint_country_ie(wdev->wiphy,
+ cr->links[link].bss->channel->band,
country_data, country_datalen);
kfree(country_data);
}
-/* Consumes bss object one way or another */
+static void cfg80211_update_link_bss(struct wireless_dev *wdev,
+ struct cfg80211_bss **bss)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
+ struct cfg80211_internal_bss *ibss;
+
+ if (!*bss)
+ return;
+
+ ibss = bss_from_pub(*bss);
+ if (list_empty(&ibss->list)) {
+ struct cfg80211_bss *found = NULL, *tmp = *bss;
+
+ found = cfg80211_get_bss(wdev->wiphy, NULL,
+ (*bss)->bssid,
+ wdev->u.client.ssid,
+ wdev->u.client.ssid_len,
+ wdev->conn_bss_type,
+ IEEE80211_PRIVACY_ANY);
+ if (found) {
+ /* The same BSS is already updated so use it
+ * instead, as it has latest info.
+ */
+ *bss = found;
+ } else {
+ /* Update with BSS provided by driver, it will
+ * be freshly added and ref cnted, we can free
+ * the old one.
+ *
+ * signal_valid can be false, as we are not
+ * expecting the BSS to be found.
+ *
+ * keep the old timestamp to avoid confusion
+ */
+ cfg80211_bss_update(rdev, ibss, false,
+ ibss->ts);
+ }
+
+ cfg80211_put_bss(wdev->wiphy, tmp);
+ }
+}
+
+/* Consumes bss object(s) one way or another */
void cfg80211_connect_done(struct net_device *dev,
struct cfg80211_connect_resp_params *params,
gfp_t gfp)
@@ -802,55 +919,34 @@ void cfg80211_connect_done(struct net_device *dev,
struct cfg80211_event *ev;
unsigned long flags;
u8 *next;
+ size_t link_info_size = 0;
+ unsigned int link;
- if (params->bss) {
- struct cfg80211_internal_bss *ibss = bss_from_pub(params->bss);
-
- if (list_empty(&ibss->list)) {
- struct cfg80211_bss *found = NULL, *tmp = params->bss;
-
- found = cfg80211_get_bss(wdev->wiphy, NULL,
- params->bss->bssid,
- wdev->u.client.ssid, wdev->u.client.ssid_len,
- wdev->conn_bss_type,
- IEEE80211_PRIVACY_ANY);
- if (found) {
- /* The same BSS is already updated so use it
- * instead, as it has latest info.
- */
- params->bss = found;
- } else {
- /* Update with BSS provided by driver, it will
- * be freshly added and ref cnted, we can free
- * the old one.
- *
- * signal_valid can be false, as we are not
- * expecting the BSS to be found.
- *
- * keep the old timestamp to avoid confusion
- */
- cfg80211_bss_update(rdev, ibss, false,
- ibss->ts);
- }
-
- cfg80211_put_bss(wdev->wiphy, tmp);
- }
+ for_each_valid_link(params, link) {
+ cfg80211_update_link_bss(wdev, ¶ms->links[link].bss);
+ link_info_size += params->links[link].bssid ? ETH_ALEN : 0;
+ link_info_size += params->links[link].addr ? ETH_ALEN : 0;
}
- ev = kzalloc(sizeof(*ev) + (params->bssid ? ETH_ALEN : 0) +
+ ev = kzalloc(sizeof(*ev) + (params->ap_mld_addr ? ETH_ALEN : 0) +
params->req_ie_len + params->resp_ie_len +
params->fils.kek_len + params->fils.pmk_len +
- (params->fils.pmkid ? WLAN_PMKID_LEN : 0), gfp);
+ (params->fils.pmkid ? WLAN_PMKID_LEN : 0) + link_info_size,
+ gfp);
+
if (!ev) {
- cfg80211_put_bss(wdev->wiphy, params->bss);
+ for_each_valid_link(params, link)
+ cfg80211_put_bss(wdev->wiphy,
+ params->links[link].bss);
return;
}
ev->type = EVENT_CONNECT_RESULT;
next = ((u8 *)ev) + sizeof(*ev);
- if (params->bssid) {
- ev->cr.bssid = next;
- memcpy((void *)ev->cr.bssid, params->bssid, ETH_ALEN);
+ if (params->ap_mld_addr) {
+ ev->cr.ap_mld_addr = next;
+ memcpy((void *)ev->cr.ap_mld_addr, params->ap_mld_addr,
+ ETH_ALEN);
next += ETH_ALEN;
}
if (params->req_ie_len) {
@@ -890,9 +986,28 @@ void cfg80211_connect_done(struct net_device *dev,
ev->cr.fils.update_erp_next_seq_num = params->fils.update_erp_next_seq_num;
if (params->fils.update_erp_next_seq_num)
ev->cr.fils.erp_next_seq_num = params->fils.erp_next_seq_num;
- if (params->bss)
- cfg80211_hold_bss(bss_from_pub(params->bss));
- ev->cr.bss = params->bss;
+ ev->cr.valid_links = params->valid_links;
+ for_each_valid_link(params, link) {
+ if (params->links[link].bss)
+ cfg80211_hold_bss(
+ bss_from_pub(params->links[link].bss));
+ ev->cr.links[link].bss = params->links[link].bss;
+
+ if (params->links[link].addr) {
+ ev->cr.links[link].addr = next;
+ memcpy((void *)ev->cr.links[link].addr,
+ params->links[link].addr,
+ ETH_ALEN);
+ next += ETH_ALEN;
+ }
+ if (params->links[link].bssid) {
+ ev->cr.links[link].bssid = next;
+ memcpy((void *)ev->cr.links[link].bssid,
+ params->links[link].bssid,
+ ETH_ALEN);
+ next += ETH_ALEN;
+ }
+ }
ev->cr.status = params->status;
ev->cr.timeout_reason = params->timeout_reason;
@@ -910,6 +1025,11 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
+ unsigned int link;
+ const u8 *connected_addr;
+ bool bss_found = false;
+ bool self_link_addr_miss = false;
+
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
@@ -919,14 +1039,50 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
if (WARN_ON(!wdev->connected))
goto out;
+ if (info->valid_links) {
+ for_each_valid_link(info, link) {
+ if (!info->links[link].addr) {
+ self_link_addr_miss = true;
+ break;
+ }
+ }
+
+ if (WARN_ON(!info->ap_mld_addr || self_link_addr_miss))
+ goto out;
+ }
+
cfg80211_wdev_release_bsses(wdev);
- if (WARN_ON(!info->bss))
- return;
+ for_each_valid_link(info, link) {
+ /* at least one BSS must exist */
+ if (info->links[link].bss) {
+ bss_found = true;
+ break;
+ }
+ }
- cfg80211_hold_bss(bss_from_pub(info->bss));
- wdev->links[0].client.current_bss = bss_from_pub(info->bss);
- ether_addr_copy(wdev->u.client.connected_addr, info->bss->bssid);
+ if (WARN_ON(!bss_found))
+ goto out;
+
+ memset(wdev->links, 0, sizeof(wdev->links));
+ wdev->valid_links = info->valid_links;
+ for_each_valid_link(info, link) {
+ if (!info->links[link].bss)
+ continue;
+
+ cfg80211_hold_bss(bss_from_pub(info->links[link].bss));
+ wdev->links[link].client.current_bss = bss_from_pub(
+ info->links[link].bss);
+ }
+
+ connected_addr = info->valid_links ?
+ info->ap_mld_addr :
+ info->links[0].bss->bssid;
+ ether_addr_copy(wdev->u.client.connected_addr, connected_addr);
+ if (info->valid_links)
+ for_each_valid_link(info, link)
+ ether_addr_copy(wdev->links[link].addr,
+ info->links[link].addr);
wdev->unprot_beacon_reported = 0;
nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy),
@@ -949,18 +1105,19 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(wrqu.ap_addr.sa_data, info->bss->bssid, ETH_ALEN);
- memcpy(wdev->wext.prev_bssid, info->bss->bssid, ETH_ALEN);
+ memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN);
+ memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN);
wdev->wext.prev_bssid_valid = true;
wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL);
#endif
return;
out:
- cfg80211_put_bss(wdev->wiphy, info->bss);
+ for_each_valid_link(info, link)
+ cfg80211_put_bss(wdev->wiphy, info->links[link].bss);
}
-/* Consumes info->bss object one way or another */
+/* Consumes info->links.bss object(s) one way or another */
void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
gfp_t gfp)
{
@@ -969,23 +1126,42 @@ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
struct cfg80211_event *ev;
unsigned long flags;
u8 *next;
+ unsigned int link;
+ size_t link_info_size = 0;
+ bool bss_found = false;
+
+ for_each_valid_link(info, link) {
+ link_info_size += info->links[link].addr ? ETH_ALEN : 0;
+ link_info_size += info->links[link].bssid ? ETH_ALEN : 0;
- if (!info->bss) {
- info->bss = cfg80211_get_bss(wdev->wiphy, info->channel,
- info->bssid, wdev->u.client.ssid,
- wdev->u.client.ssid_len,
- wdev->conn_bss_type,
- IEEE80211_PRIVACY_ANY);
+ if (info->links[link].bss) {
+ bss_found = true;
+ continue;
+ }
+
+ info->links[link].bss = cfg80211_get_bss(
+ wdev->wiphy,
+ info->links[link].channel,
+ info->links[link].bssid,
+ wdev->u.client.ssid,
+ wdev->u.client.ssid_len,
+ wdev->conn_bss_type,
+ IEEE80211_PRIVACY_ANY);
+
+ if (info->links[link].bss)
+ bss_found = true;
}
- if (WARN_ON(!info->bss))
+ if (WARN_ON(!bss_found))
return;
ev = kzalloc(sizeof(*ev) + info->req_ie_len + info->resp_ie_len +
info->fils.kek_len + info->fils.pmk_len +
- (info->fils.pmkid ? WLAN_PMKID_LEN : 0), gfp);
+ (info->fils.pmkid ? WLAN_PMKID_LEN : 0) +
+ (info->ap_mld_addr ? ETH_ALEN : 0) + link_info_size, gfp);
if (!ev) {
- cfg80211_put_bss(wdev->wiphy, info->bss);
+ for_each_valid_link(info, link)
+ cfg80211_put_bss(wdev->wiphy, info->links[link].bss);
return;
}
@@ -1027,7 +1203,32 @@ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
ev->rm.fils.update_erp_next_seq_num = info->fils.update_erp_next_seq_num;
if (info->fils.update_erp_next_seq_num)
ev->rm.fils.erp_next_seq_num = info->fils.erp_next_seq_num;
- ev->rm.bss = info->bss;
+ if (info->ap_mld_addr) {
+ ev->rm.ap_mld_addr = next;
+ memcpy((void *)ev->rm.ap_mld_addr, info->ap_mld_addr,
+ ETH_ALEN);
+ next += ETH_ALEN;
+ }
+ ev->rm.valid_links = info->valid_links;
+ for_each_valid_link(info, link) {
+ ev->rm.links[link].bss = info->links[link].bss;
+
+ if (info->links[link].addr) {
+ ev->rm.links[link].addr = next;
+ memcpy((void *)ev->rm.links[link].addr,
+ info->links[link].addr,
+ ETH_ALEN);
+ next += ETH_ALEN;
+ }
+
+ if (info->links[link].bssid) {
+ ev->rm.links[link].bssid = next;
+ memcpy((void *)ev->rm.links[link].bssid,
+ info->links[link].bssid,
+ ETH_ALEN);
+ next += ETH_ALEN;
+ }
+ }
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
--
2.25.1
Hi,
On Thu, 2022-05-26 at 06:56 +0530, Veerendranath Jakkam wrote:
> The MLO links used for connection with an MLD AP are decided by the
> driver in case of SME offloaded to driver.
>
> Add support for the drivers to indicate the information of links used
> for MLO connection in connect and roam callbacks, update the connected
> links information in wdev from connect/roam result sent by driver.
> Also, send the connected links information to userspace.
>
> Add a netlink flag attribute to indicate that userspace supports
> handling of MLO connection. Drivers must not do MLO connection when this
> flag is not set. This is to maintain backwards compatibility with older
> supplicant versions which doesn't have support for MLO connection.
Looks good to me!
Couple of questions/nits below:
> + * @links.bssid: For MLO connection, MAC address of the AP link. For non-MLO
> + * connection, links[0].bssid points to the BSSID of the AP (may be %NULL).
> + * @links.bss: For MLO connection, entry of bss to which STA link is connected
> + * to, can be obtained through cfg80211_get_bss() but may be %NULL for some
> + * valid links as scan results of all AP links may not be received.
Do we want to encourage that? In that case, we cannot show all the
information about the BSS to userspace, nor hold on to the entry to
later show that we're connected, etc.
Even now I'm not sure I like this code that lets the driver get away
without a BSS entry.
Maybe it'd be better to ask the driver to make up an entry on the fly
and reference it, at least with the right channel, so it can be updated
later?
>
> + NL80211_ATTR_MLO_SUPPORT,
> /* add attributes here, update the policy in nl80211.c */
>
please add a blank line there after the new attribute
> + unsigned int link;
> + const u8 *connected_addr;
> + bool bss_found = false;
> + bool self_link_addr_miss = false;
>
[...]
>
> + if (cr->valid_links) {
> + for_each_valid_link(cr, link) {
> + if (!cr->links[link].addr) {
> + self_link_addr_miss = true;
You can declare self_link_addr_miss inside the "if (cr->valid_links) {"
scope, I think?
> + for_each_valid_link(cr, link)
> + cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
It might be worth extracting this into a small helper function, you do
it quite a number of times.
> + if ((!cr->valid_links && link == 1) ||
> + (cr->valid_links && link == ARRAY_SIZE(wdev->links)))
> + WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect);
You can put all the conditions inside the WARN_ON_ONCE(), no?
But is this even right, seems like even mac80211 with auth/assoc might
eventually get to some of this code?
> + memset(wdev->links, 0, sizeof(wdev->links));
> + wdev->valid_links = cr->valid_links;
> + for_each_valid_link(cr, link) {
> + if (!cr->links[link].bss)
> + continue;
> +
> + wdev->links[link].client.current_bss = bss_from_pub(
> + cr->links[link].bss);
maybe line-break after =, instead of like this
> + if (cr->valid_links)
> + for_each_valid_link(cr, link)
> + ether_addr_copy(wdev->links[link].addr,
> + cr->links[link].addr);
>
I think I might prefer braces for the "if", so it's more obvious. Dunno.
Are you sure ether_addr_copy is fine, there wasn't really any alignment
guarantee on cr->links[link].addr.
> @@ -910,6 +1025,11 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
> #ifdef CONFIG_CFG80211_WEXT
> union iwreq_data wrqu;
> #endif
> + unsigned int link;
> + const u8 *connected_addr;
> + bool bss_found = false;
> + bool self_link_addr_miss = false;
> +
> ASSERT_WDEV_LOCK(wdev);
>
> if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
> @@ -919,14 +1039,50 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
> if (WARN_ON(!wdev->connected))
> goto out;
>
> + if (info->valid_links) {
> + for_each_valid_link(info, link) {
> + if (!info->links[link].addr) {
> + self_link_addr_miss = true;
same here as above
maybe it's worth pulling out the validation into a separate function?
> @@ -949,18 +1105,19 @@ void __cfg80211_roamed(struct wireless_dev *wdev,
>
> memset(&wrqu, 0, sizeof(wrqu));
> wrqu.ap_addr.sa_family = ARPHRD_ETHER;
> - memcpy(wrqu.ap_addr.sa_data, info->bss->bssid, ETH_ALEN);
> - memcpy(wdev->wext.prev_bssid, info->bss->bssid, ETH_ALEN);
> + memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN);
> + memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN);
> wdev->wext.prev_bssid_valid = true;
> wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL);
> #endif
I wonder if we should just completely skip WEXT stuff for MLD, it's
probably not going to result in anything useful? Hmm.
> + for_each_valid_link(info, link)
> + cfg80211_put_bss(wdev->wiphy, info->links[link].bss);
again this :)
> @@ -969,23 +1126,42 @@ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
> struct cfg80211_event *ev;
> unsigned long flags;
> u8 *next;
> + unsigned int link;
> + size_t link_info_size = 0;
> + bool bss_found = false;
> +
> + for_each_valid_link(info, link) {
> + link_info_size += info->links[link].addr ? ETH_ALEN : 0;
> + link_info_size += info->links[link].bssid ? ETH_ALEN : 0;
>
> - if (!info->bss) {
> - info->bss = cfg80211_get_bss(wdev->wiphy, info->channel,
> - info->bssid, wdev->u.client.ssid,
> - wdev->u.client.ssid_len,
> - wdev->conn_bss_type,
> - IEEE80211_PRIVACY_ANY);
> + if (info->links[link].bss) {
> + bss_found = true;
> + continue;
> + }
> +
> + info->links[link].bss = cfg80211_get_bss(
> + wdev->wiphy,
> + info->links[link].channel,
> + info->links[link].bssid,
> + wdev->u.client.ssid,
> + wdev->u.client.ssid_len,
> + wdev->conn_bss_type,
> + IEEE80211_PRIVACY_ANY);
> +
> + if (info->links[link].bss)
> + bss_found = true;
> }
>
> - if (WARN_ON(!info->bss))
> + if (WARN_ON(!bss_found))
> return;
This goes with my question earlier - here you're basically assuming
finding a single BSS is fine. Do we really think so? It used to be we
wanted all of them, and I kind of tend to think drivers should just make
sure they have all of them - once we have the entry it can be updated,
but if we don't have one, we'll never again get the information on the
BSS, for purposes such as "iw link" output.
I tend to think we should always require all BSS entries to exist, even
if the driver initially has to make up a fake entry with pretty much no
information.
Or maybe we have enough information here already (BSSID/frequency) to
make up a fake entry in cfg80211?
> + if (info->ap_mld_addr) {
> + ev->rm.ap_mld_addr = next;
> + memcpy((void *)ev->rm.ap_mld_addr, info->ap_mld_addr,
> + ETH_ALEN);
Why the cast?
johannes
Thanks for reviewing the patch.
On 5/27/2022 1:26 PM, Johannes Berg wrote:
>
>> + for_each_valid_link(cr, link)
>> + cfg80211_put_bss(wdev->wiphy, cr->links[link].bss);
reduced the repeated code by using "out" label. Can't make common
utility function
for both roam and connect callbacks since variables in links struct
differs for connect result and roam info.
Also, addressed several other comments about code cleanup and nits in v2.
>
>> - if (WARN_ON(!info->bss))
>> + if (WARN_ON(!bss_found))
>> return;
> This goes with my question earlier - here you're basically assuming
> finding a single BSS is fine. Do we really think so? It used to be we
> wanted all of them, and I kind of tend to think drivers should just make
> sure they have all of them - once we have the entry it can be updated,
> but if we don't have one, we'll never again get the information on the
> BSS, for purposes such as "iw link" output.
>
> I tend to think we should always require all BSS entries to exist, even
> if the driver initially has to make up a fake entry with pretty much no
> information.
>
> Or maybe we have enough information here already (BSSID/frequency) to
> make up a fake entry in cfg80211?
>
Agree, Drivers should have enough formation to create a BSS entry for
all the links.
As suggested added checks for all bss entries availability in v2 patch.
>> + if (info->ap_mld_addr) {
>> + ev->rm.ap_mld_addr = next;
>> + memcpy((void *)ev->rm.ap_mld_addr, info->ap_mld_addr,
>> + ETH_ALEN);
> Why the cast?
Without casting it gives below error.
note: expected 'void *' but argument is of type 'const u8 *' {aka 'const unsigned char *'}
--
veeru