Hi All,
I'm seeing the mac80211 core submitting skb-s with queue-ids >= hw.queues
on a ralink rt2500 PCI card which causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.
I have a hunch that although I've come up with a quick fix in the rt2x00
driver, that this is really an issue with the mac80211 core and that
the core should never submit skb-s where skb_get_queue_mapping()
returns a value >= ieee80211_hw.queues ?
Because of this hunch I have added a WARN_ON(1) when the workaround
triggered to see what I would get. This results in the following
2 backtraces just after associating with my ISP provisioned access-point:
[ 58.263794] ------------[ cut here ]------------
[ 58.263831] WARNING: CPU: 0 PID: 662 at drivers/net/wireless/ralink/rt2x00/rt2x00.h:1316 rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
[ 58.263856] Modules linked in: rt2500pci(E) rt2x00pci(E) rt2x00mmio(E) rt2x00lib(E) mac80211 libarc4 snd_atiixp_modem snd_atiixp snd_ac97_codec ac97_bus cfg80211 snd_seq snd_seq_device snd_pcm joydev edac_mce_amd snd_timer 8139too eeprom_93cx6 pcspkr snd 8139cp mii k8temp soundcore qrtr rfkill i2c_piix4 zram amdgpu iommu_v2 gpu_sched drm_buddy radeon video wmi sdhci_pci drm_ttm_helper cqhci ttm sdhci firewire_ohci drm_display_helper firewire_core mmc_core ata_generic pata_acpi serio_raw yenta_socket cec crc_itu_t pata_atiixp ip6_tables ip_tables i2c_dev fuse
[ 58.264061] CPU: 0 PID: 662 Comm: wpa_supplicant Tainted: G E 6.0.0-rc3+ #112
[ 58.264069] Hardware name: MICRO-STAR INT'L CO.,LTD MS-1013, BIOS A1013AMS V4.30 01/09/2006
[ 58.264074] RIP: 0010:rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
[ 58.264088] Code: 8b 54 24 08 49 89 f5 8b 4a 18 f6 43 28 20 0f 85 cb 00 00 00 44 0f b7 f8 41 8d 77 fe 83 fe 01 77 56 83 f9 02 0f 87 10 01 00 00 <0f> 0b 83 f9 02 75 12 4d 8b b4 24 98 11 00 00 b8 60 01 00 00 4d 85
[ 58.264094] RSP: 0018:ffffa30501c63780 EFLAGS: 00010246
[ 58.264103] RAX: 0000000000000002 RBX: ffff93df43ab3e00 RCX: 0000000000000002
[ 58.264108] RDX: ffffffffc123c4a0 RSI: 0000000000000000 RDI: ffff93df4b3c8e00
[ 58.264113] RBP: ffff93df4b3c8e00 R08: 0000000000000001 R09: 0000000000000001
[ 58.264118] R10: ffff93df49860000 R11: 000000000001103d R12: ffff93df4b3cb3c0
[ 58.264123] R13: ffffa30501c637e8 R14: ffff93df4b3c9440 R15: 0000000000000002
[ 58.264128] FS: 00007feddd63c7c0(0000) GS:ffff93dfb9c00000(0000) knlGS:0000000000000000
[ 58.264134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 58.264139] CR2: 0000557d841633c8 CR3: 000000000994a000 CR4: 00000000000006f0
[ 58.264145] Call Trace:
[ 58.264149] <TASK>
[ 58.264154] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 58.264176] ieee80211_process_measurement_req+0x2ca/0x890 [mac80211]
[ 58.264274] ieee80211_next_txq+0x2162/0x2790 [mac80211]
[ 58.264335] ieee80211_tx_prepare_skb+0x250/0x290 [mac80211]
[ 58.264426] __ieee80211_subif_start_xmit+0x21f/0x410 [mac80211]
[ 58.264499] ieee80211_tx_control_port+0x2d5/0x5a0 [mac80211]
[ 58.264572] nl80211_tx_control_port+0x1cb/0x380 [cfg80211]
[ 58.264864] genl_family_rcv_msg_doit+0xd0/0x120
[ 58.264901] genl_rcv_msg+0xca/0x1c0
[ 58.264912] ? nl80211_prepare_wdev_dump+0x220/0x220 [cfg80211]
[ 58.265045] ? genl_get_cmd+0xe0/0xe0
[ 58.265057] netlink_rcv_skb+0x51/0x100
[ 58.265085] genl_rcv+0x24/0x40
[ 58.265092] netlink_unicast+0x168/0x250
[ 58.265109] netlink_sendmsg+0x242/0x4a0
[ 58.265138] sock_sendmsg+0x5f/0x70
[ 58.265149] ____sys_sendmsg+0x22e/0x270
[ 58.265157] ? import_iovec+0x17/0x20
[ 58.265166] ? copy_msghdr_from_user+0x5d/0x80
[ 58.265191] ___sys_sendmsg+0x86/0xd0
[ 58.265219] ? lock_is_held_type+0xe3/0x140
[ 58.265234] ? find_held_lock+0x2b/0x80
[ 58.265253] ? lock_is_held_type+0xe3/0x140
[ 58.265272] ? rcu_read_lock_sched_held+0x3f/0x80
[ 58.265284] ? kfree+0x365/0x5c0
[ 58.265309] __sys_sendmsg+0x47/0x80
[ 58.265339] ? syscall_enter_from_user_mode+0x22/0xc0
[ 58.265352] do_syscall_64+0x5b/0x80
[ 58.265370] ? asm_common_interrupt+0x22/0x40
[ 58.265379] ? lockdep_hardirqs_on+0x7d/0x100
[ 58.265390] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 58.265396] RIP: 0033:0x7feddd1318e4
[ 58.265407] Code: 15 41 45 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 1d cd 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 58.265413] RSP: 002b:00007ffdc089f4f8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 58.265423] RAX: ffffffffffffffda RBX: 000055c1579c4880 RCX: 00007feddd1318e4
[ 58.265428] RDX: 0000000000000000 RSI: 00007ffdc089f530 RDI: 0000000000000006
[ 58.265433] RBP: 000055c157a41910 R08: 0000000000000004 R09: 000000000000000d
[ 58.265438] R10: 00007ffdc089f610 R11: 0000000000000202 R12: 000055c1579c4790
[ 58.265442] R13: 00007ffdc089f530 R14: 0000000000000000 R15: 00007ffdc089f610
[ 58.265485] </TASK>
[ 58.265489] irq event stamp: 51698
[ 58.265493] hardirqs last enabled at (51704): [<ffffffff9d184a6e>] __up_console_sem+0x5e/0x70
[ 58.265502] hardirqs last disabled at (51709): [<ffffffff9d184a53>] __up_console_sem+0x43/0x70
[ 58.265511] softirqs last enabled at (50976): [<ffffffff9d0fbc9d>] __irq_exit_rcu+0xed/0x160
[ 58.265520] softirqs last disabled at (50988): [<ffffffffc1414692>] ieee80211_tx_control_port+0x282/0x5a0 [mac80211]
[ 58.265574] ---[ end trace 0000000000000000 ]---
Backtrace 2:
[ 58.283734] ------------[ cut here ]------------
[ 58.283747] WARNING: CPU: 0 PID: 662 at drivers/net/wireless/ralink/rt2x00/rt2x00.h:1316 rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
[ 58.283774] Modules linked in: rt2500pci(E) rt2x00pci(E) rt2x00mmio(E) rt2x00lib(E) mac80211 libarc4 snd_atiixp_modem snd_atiixp snd_ac97_codec ac97_bus cfg80211 snd_seq snd_seq_device snd_pcm joydev edac_mce_amd snd_timer 8139too eeprom_93cx6 pcspkr snd 8139cp mii k8temp soundcore qrtr rfkill i2c_piix4 zram amdgpu iommu_v2 gpu_sched drm_buddy radeon video wmi sdhci_pci drm_ttm_helper cqhci ttm sdhci firewire_ohci drm_display_helper firewire_core mmc_core ata_generic pata_acpi serio_raw yenta_socket cec crc_itu_t pata_atiixp ip6_tables ip_tables i2c_dev fuse
[ 58.283986] CPU: 0 PID: 662 Comm: wpa_supplicant Tainted: G W E 6.0.0-rc3+ #112
[ 58.283994] Hardware name: MICRO-STAR INT'L CO.,LTD MS-1013, BIOS A1013AMS V4.30 01/09/2006
[ 58.283999] RIP: 0010:rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
[ 58.284015] Code: 8b 54 24 08 49 89 f5 8b 4a 18 f6 43 28 20 0f 85 cb 00 00 00 44 0f b7 f8 41 8d 77 fe 83 fe 01 77 56 83 f9 02 0f 87 10 01 00 00 <0f> 0b 83 f9 02 75 12 4d 8b b4 24 98 11 00 00 b8 60 01 00 00 4d 85
[ 58.284021] RSP: 0018:ffffa30501c63770 EFLAGS: 00010246
[ 58.284030] RAX: 0000000000000002 RBX: ffff93df43ab3400 RCX: 0000000000000002
[ 58.284035] RDX: ffffffffc123c4a0 RSI: 0000000000000000 RDI: ffff93df4b3c8e00
[ 58.284040] RBP: ffff93df4b3c8e00 R08: 0000000000000001 R09: 0000000000000001
[ 58.284045] R10: ffff93df49860000 R11: 0000000001761407 R12: ffff93df4b3cb3c0
[ 58.284050] R13: ffffa30501c637d8 R14: ffff93df4b3c9440 R15: 0000000000000002
[ 58.284056] FS: 00007feddd63c7c0(0000) GS:ffff93dfb9c00000(0000) knlGS:0000000000000000
[ 58.284062] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 58.284067] CR2: 000055c157a50668 CR3: 000000000994a000 CR4: 00000000000006f0
[ 58.284072] Call Trace:
[ 58.284080] <TASK>
[ 58.284084] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 58.284110] ieee80211_process_measurement_req+0x2ca/0x890 [mac80211]
[ 58.284216] ieee80211_next_txq+0x2162/0x2790 [mac80211]
[ 58.284278] ieee80211_tx_prepare_skb+0x250/0x290 [mac80211]
[ 58.284368] __ieee80211_subif_start_xmit+0x21f/0x410 [mac80211]
[ 58.284441] ieee80211_tx_control_port+0x2d5/0x5a0 [mac80211]
[ 58.284514] nl80211_tx_control_port+0x1cb/0x380 [cfg80211]
[ 58.284791] genl_family_rcv_msg_doit+0xd0/0x120
[ 58.284828] genl_rcv_msg+0xca/0x1c0
[ 58.284840] ? nl80211_prepare_wdev_dump+0x220/0x220 [cfg80211]
[ 58.284973] ? genl_get_cmd+0xe0/0xe0
[ 58.284985] netlink_rcv_skb+0x51/0x100
[ 58.285013] genl_rcv+0x24/0x40
[ 58.285022] netlink_unicast+0x168/0x250
[ 58.285038] netlink_sendmsg+0x242/0x4a0
[ 58.285067] sock_sendmsg+0x5f/0x70
[ 58.285078] ____sys_sendmsg+0x22e/0x270
[ 58.285087] ? import_iovec+0x17/0x20
[ 58.285095] ? copy_msghdr_from_user+0x5d/0x80
[ 58.285120] ___sys_sendmsg+0x86/0xd0
[ 58.285151] ? lock_is_held_type+0xe3/0x140
[ 58.285165] ? find_held_lock+0x2b/0x80
[ 58.285182] ? lock_is_held_type+0xe3/0x140
[ 58.285202] ? rcu_read_lock_sched_held+0x3f/0x80
[ 58.285215] ? kfree+0x365/0x5c0
[ 58.285238] __sys_sendmsg+0x47/0x80
[ 58.285269] ? syscall_enter_from_user_mode+0x22/0xc0
[ 58.285282] do_syscall_64+0x5b/0x80
[ 58.285289] ? do_syscall_64+0x67/0x80
[ 58.285297] ? lockdep_hardirqs_on+0x7d/0x100
[ 58.285308] ? do_syscall_64+0x67/0x80
[ 58.285318] ? do_syscall_64+0x67/0x80
[ 58.285326] ? lockdep_hardirqs_on+0x7d/0x100
[ 58.285337] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 58.285344] RIP: 0033:0x7feddd1318e4
[ 58.285354] Code: 15 41 45 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 1d cd 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 58.285360] RSP: 002b:00007ffdc089f898 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 58.285369] RAX: ffffffffffffffda RBX: 000055c1579c4880 RCX: 00007feddd1318e4
[ 58.285374] RDX: 0000000000000000 RSI: 00007ffdc089f8d0 RDI: 0000000000000006
[ 58.285379] RBP: 000055c157a41910 R08: 0000000000000004 R09: 00007feddd1f73e0
[ 58.285384] R10: 00007ffdc089f9b0 R11: 0000000000000202 R12: 000055c1579c4790
[ 58.285389] R13: 00007ffdc089f8d0 R14: 0000000000000000 R15: 00007ffdc089f9b0
[ 58.285431] </TASK>
[ 58.285435] irq event stamp: 52662
[ 58.285439] hardirqs last enabled at (52668): [<ffffffff9d184a6e>] __up_console_sem+0x5e/0x70
[ 58.285449] hardirqs last disabled at (52673): [<ffffffff9d184a53>] __up_console_sem+0x43/0x70
[ 58.285457] softirqs last enabled at (51810): [<ffffffff9ddec003>] packet_poll+0xd3/0x140
[ 58.285466] softirqs last disabled at (51934): [<ffffffffc1414692>] ieee80211_tx_control_port+0x282/0x5a0 [mac80211]
[ 58.285520] ---[ end trace 0000000000000000 ]---
If this is indeed considered an issue with the core I hope that these
traces might help pinpoint the issue.
Regards,
Hans
Hans de Goede (1):
wifi: rt2x00: Fix "Error - Attempt to send packet over invalid queue 2"
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--
2.37.2
Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver
is seeing tx skbs submitted to it with the queue-id set to 2 / set to
IEEE80211_AC_BE on a rt2500 card when associating with an access-point.
This causes rt2x00queue_get_tx_queue() to return NULL and the following
error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to
send packet over invalid queue 2", after which association with the AP
fails.
This patch works around this by mapping QID_AC_BE and QID_AC_BK
to QID_AC_VI when there are only 2 tx_queues.
Signed-off-by: Hans de Goede <[email protected]>
---
The net/mac80211 code has checks for local->hw.queues < IEEE80211_NUM_ACS
in various places and returns queue-id 0 when this condition is true.
So it looks like the rt2x00 driver receiving a queue-id of 2 /
IEEE80211_AC_BE might actually be a bug in the mac80211 core code,
I will send out a separate email about this.
---
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index 8f5772b98f58..07a6a5a9ce13 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -1309,8 +1309,11 @@ void rt2x00queue_unmap_skb(struct queue_entry *entry);
*/
static inline struct data_queue *
rt2x00queue_get_tx_queue(struct rt2x00_dev *rt2x00dev,
- const enum data_queue_qid queue)
+ enum data_queue_qid queue)
{
+ if (queue >= rt2x00dev->ops->tx_queues && queue < IEEE80211_NUM_ACS)
+ queue = rt2x00dev->ops->tx_queues - 1;
+
if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx)
return &rt2x00dev->tx[queue];
--
2.37.2
On Thu, Sep 08, 2022 at 07:36:18PM +0200, Hans de Goede wrote:
> Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver
> is seeing tx skbs submitted to it with the queue-id set to 2 / set to
> IEEE80211_AC_BE on a rt2500 card when associating with an access-point.
I'm impressed you have still working rt2500 card :-)
> This causes rt2x00queue_get_tx_queue() to return NULL and the following
> error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to
> send packet over invalid queue 2", after which association with the AP
> fails.
>
> This patch works around this by mapping QID_AC_BE and QID_AC_BK
> to QID_AC_VI when there are only 2 tx_queues.
>
> Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
On Thu, Sep 08, 2022 at 07:36:17PM +0200, Hans de Goede wrote:
> I'm seeing the mac80211 core submitting skb-s with queue-ids >= hw.queues
> on a ralink rt2500 PCI card which causes rt2x00queue_get_tx_queue() to
> return NULL and the following error to be logged: "ieee80211 phy0:
> rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
> after which association with the AP fails.
>
> I have a hunch that although I've come up with a quick fix in the rt2x00
> driver, that this is really an issue with the mac80211 core and that
> the core should never submit skb-s where skb_get_queue_mapping()
> returns a value >= ieee80211_hw.queues ?
Yes, most likely this is mac80211 problem and other prehistoric cards
will not work.
Maybe this commit is related to the issue ?
commit 10cb8e617560fc050a759a897a2dde07a5fe04cb
Author: Markus Theil <[email protected]>
Date: Sat Feb 6 12:51:12 2021 +0100
mac80211: enable QoS support for nl80211 ctrl port
If someone have time, could look at it, but not sure if we
have any working hardware except yours rt2500 that require this :-)
Regards
Stanislaw
> Because of this hunch I have added a WARN_ON(1) when the workaround
> triggered to see what I would get. This results in the following
> 2 backtraces just after associating with my ISP provisioned access-point:
>
> [ 58.263794] ------------[ cut here ]------------
> [ 58.263831] WARNING: CPU: 0 PID: 662 at drivers/net/wireless/ralink/rt2x00/rt2x00.h:1316 rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
> [ 58.263856] Modules linked in: rt2500pci(E) rt2x00pci(E) rt2x00mmio(E) rt2x00lib(E) mac80211 libarc4 snd_atiixp_modem snd_atiixp snd_ac97_codec ac97_bus cfg80211 snd_seq snd_seq_device snd_pcm joydev edac_mce_amd snd_timer 8139too eeprom_93cx6 pcspkr snd 8139cp mii k8temp soundcore qrtr rfkill i2c_piix4 zram amdgpu iommu_v2 gpu_sched drm_buddy radeon video wmi sdhci_pci drm_ttm_helper cqhci ttm sdhci firewire_ohci drm_display_helper firewire_core mmc_core ata_generic pata_acpi serio_raw yenta_socket cec crc_itu_t pata_atiixp ip6_tables ip_tables i2c_dev fuse
> [ 58.264061] CPU: 0 PID: 662 Comm: wpa_supplicant Tainted: G E 6.0.0-rc3+ #112
> [ 58.264069] Hardware name: MICRO-STAR INT'L CO.,LTD MS-1013, BIOS A1013AMS V4.30 01/09/2006
> [ 58.264074] RIP: 0010:rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
> [ 58.264088] Code: 8b 54 24 08 49 89 f5 8b 4a 18 f6 43 28 20 0f 85 cb 00 00 00 44 0f b7 f8 41 8d 77 fe 83 fe 01 77 56 83 f9 02 0f 87 10 01 00 00 <0f> 0b 83 f9 02 75 12 4d 8b b4 24 98 11 00 00 b8 60 01 00 00 4d 85
> [ 58.264094] RSP: 0018:ffffa30501c63780 EFLAGS: 00010246
> [ 58.264103] RAX: 0000000000000002 RBX: ffff93df43ab3e00 RCX: 0000000000000002
> [ 58.264108] RDX: ffffffffc123c4a0 RSI: 0000000000000000 RDI: ffff93df4b3c8e00
> [ 58.264113] RBP: ffff93df4b3c8e00 R08: 0000000000000001 R09: 0000000000000001
> [ 58.264118] R10: ffff93df49860000 R11: 000000000001103d R12: ffff93df4b3cb3c0
> [ 58.264123] R13: ffffa30501c637e8 R14: ffff93df4b3c9440 R15: 0000000000000002
> [ 58.264128] FS: 00007feddd63c7c0(0000) GS:ffff93dfb9c00000(0000) knlGS:0000000000000000
> [ 58.264134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 58.264139] CR2: 0000557d841633c8 CR3: 000000000994a000 CR4: 00000000000006f0
> [ 58.264145] Call Trace:
> [ 58.264149] <TASK>
> [ 58.264154] ? _raw_spin_unlock_irqrestore+0x30/0x60
> [ 58.264176] ieee80211_process_measurement_req+0x2ca/0x890 [mac80211]
> [ 58.264274] ieee80211_next_txq+0x2162/0x2790 [mac80211]
> [ 58.264335] ieee80211_tx_prepare_skb+0x250/0x290 [mac80211]
> [ 58.264426] __ieee80211_subif_start_xmit+0x21f/0x410 [mac80211]
> [ 58.264499] ieee80211_tx_control_port+0x2d5/0x5a0 [mac80211]
> [ 58.264572] nl80211_tx_control_port+0x1cb/0x380 [cfg80211]
> [ 58.264864] genl_family_rcv_msg_doit+0xd0/0x120
> [ 58.264901] genl_rcv_msg+0xca/0x1c0
> [ 58.264912] ? nl80211_prepare_wdev_dump+0x220/0x220 [cfg80211]
> [ 58.265045] ? genl_get_cmd+0xe0/0xe0
> [ 58.265057] netlink_rcv_skb+0x51/0x100
> [ 58.265085] genl_rcv+0x24/0x40
> [ 58.265092] netlink_unicast+0x168/0x250
> [ 58.265109] netlink_sendmsg+0x242/0x4a0
> [ 58.265138] sock_sendmsg+0x5f/0x70
> [ 58.265149] ____sys_sendmsg+0x22e/0x270
> [ 58.265157] ? import_iovec+0x17/0x20
> [ 58.265166] ? copy_msghdr_from_user+0x5d/0x80
> [ 58.265191] ___sys_sendmsg+0x86/0xd0
> [ 58.265219] ? lock_is_held_type+0xe3/0x140
> [ 58.265234] ? find_held_lock+0x2b/0x80
> [ 58.265253] ? lock_is_held_type+0xe3/0x140
> [ 58.265272] ? rcu_read_lock_sched_held+0x3f/0x80
> [ 58.265284] ? kfree+0x365/0x5c0
> [ 58.265309] __sys_sendmsg+0x47/0x80
> [ 58.265339] ? syscall_enter_from_user_mode+0x22/0xc0
> [ 58.265352] do_syscall_64+0x5b/0x80
> [ 58.265370] ? asm_common_interrupt+0x22/0x40
> [ 58.265379] ? lockdep_hardirqs_on+0x7d/0x100
> [ 58.265390] entry_SYSCALL_64_after_hwframe+0x63/0xcd
> [ 58.265396] RIP: 0033:0x7feddd1318e4
> [ 58.265407] Code: 15 41 45 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 1d cd 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
> [ 58.265413] RSP: 002b:00007ffdc089f4f8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
> [ 58.265423] RAX: ffffffffffffffda RBX: 000055c1579c4880 RCX: 00007feddd1318e4
> [ 58.265428] RDX: 0000000000000000 RSI: 00007ffdc089f530 RDI: 0000000000000006
> [ 58.265433] RBP: 000055c157a41910 R08: 0000000000000004 R09: 000000000000000d
> [ 58.265438] R10: 00007ffdc089f610 R11: 0000000000000202 R12: 000055c1579c4790
> [ 58.265442] R13: 00007ffdc089f530 R14: 0000000000000000 R15: 00007ffdc089f610
> [ 58.265485] </TASK>
> [ 58.265489] irq event stamp: 51698
> [ 58.265493] hardirqs last enabled at (51704): [<ffffffff9d184a6e>] __up_console_sem+0x5e/0x70
> [ 58.265502] hardirqs last disabled at (51709): [<ffffffff9d184a53>] __up_console_sem+0x43/0x70
> [ 58.265511] softirqs last enabled at (50976): [<ffffffff9d0fbc9d>] __irq_exit_rcu+0xed/0x160
> [ 58.265520] softirqs last disabled at (50988): [<ffffffffc1414692>] ieee80211_tx_control_port+0x282/0x5a0 [mac80211]
> [ 58.265574] ---[ end trace 0000000000000000 ]---
>
> Backtrace 2:
>
> [ 58.283734] ------------[ cut here ]------------
> [ 58.283747] WARNING: CPU: 0 PID: 662 at drivers/net/wireless/ralink/rt2x00/rt2x00.h:1316 rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
> [ 58.283774] Modules linked in: rt2500pci(E) rt2x00pci(E) rt2x00mmio(E) rt2x00lib(E) mac80211 libarc4 snd_atiixp_modem snd_atiixp snd_ac97_codec ac97_bus cfg80211 snd_seq snd_seq_device snd_pcm joydev edac_mce_amd snd_timer 8139too eeprom_93cx6 pcspkr snd 8139cp mii k8temp soundcore qrtr rfkill i2c_piix4 zram amdgpu iommu_v2 gpu_sched drm_buddy radeon video wmi sdhci_pci drm_ttm_helper cqhci ttm sdhci firewire_ohci drm_display_helper firewire_core mmc_core ata_generic pata_acpi serio_raw yenta_socket cec crc_itu_t pata_atiixp ip6_tables ip_tables i2c_dev fuse
> [ 58.283986] CPU: 0 PID: 662 Comm: wpa_supplicant Tainted: G W E 6.0.0-rc3+ #112
> [ 58.283994] Hardware name: MICRO-STAR INT'L CO.,LTD MS-1013, BIOS A1013AMS V4.30 01/09/2006
> [ 58.283999] RIP: 0010:rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
> [ 58.284015] Code: 8b 54 24 08 49 89 f5 8b 4a 18 f6 43 28 20 0f 85 cb 00 00 00 44 0f b7 f8 41 8d 77 fe 83 fe 01 77 56 83 f9 02 0f 87 10 01 00 00 <0f> 0b 83 f9 02 75 12 4d 8b b4 24 98 11 00 00 b8 60 01 00 00 4d 85
> [ 58.284021] RSP: 0018:ffffa30501c63770 EFLAGS: 00010246
> [ 58.284030] RAX: 0000000000000002 RBX: ffff93df43ab3400 RCX: 0000000000000002
> [ 58.284035] RDX: ffffffffc123c4a0 RSI: 0000000000000000 RDI: ffff93df4b3c8e00
> [ 58.284040] RBP: ffff93df4b3c8e00 R08: 0000000000000001 R09: 0000000000000001
> [ 58.284045] R10: ffff93df49860000 R11: 0000000001761407 R12: ffff93df4b3cb3c0
> [ 58.284050] R13: ffffa30501c637d8 R14: ffff93df4b3c9440 R15: 0000000000000002
> [ 58.284056] FS: 00007feddd63c7c0(0000) GS:ffff93dfb9c00000(0000) knlGS:0000000000000000
> [ 58.284062] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 58.284067] CR2: 000055c157a50668 CR3: 000000000994a000 CR4: 00000000000006f0
> [ 58.284072] Call Trace:
> [ 58.284080] <TASK>
> [ 58.284084] ? _raw_spin_unlock_irqrestore+0x30/0x60
> [ 58.284110] ieee80211_process_measurement_req+0x2ca/0x890 [mac80211]
> [ 58.284216] ieee80211_next_txq+0x2162/0x2790 [mac80211]
> [ 58.284278] ieee80211_tx_prepare_skb+0x250/0x290 [mac80211]
> [ 58.284368] __ieee80211_subif_start_xmit+0x21f/0x410 [mac80211]
> [ 58.284441] ieee80211_tx_control_port+0x2d5/0x5a0 [mac80211]
> [ 58.284514] nl80211_tx_control_port+0x1cb/0x380 [cfg80211]
> [ 58.284791] genl_family_rcv_msg_doit+0xd0/0x120
> [ 58.284828] genl_rcv_msg+0xca/0x1c0
> [ 58.284840] ? nl80211_prepare_wdev_dump+0x220/0x220 [cfg80211]
> [ 58.284973] ? genl_get_cmd+0xe0/0xe0
> [ 58.284985] netlink_rcv_skb+0x51/0x100
> [ 58.285013] genl_rcv+0x24/0x40
> [ 58.285022] netlink_unicast+0x168/0x250
> [ 58.285038] netlink_sendmsg+0x242/0x4a0
> [ 58.285067] sock_sendmsg+0x5f/0x70
> [ 58.285078] ____sys_sendmsg+0x22e/0x270
> [ 58.285087] ? import_iovec+0x17/0x20
> [ 58.285095] ? copy_msghdr_from_user+0x5d/0x80
> [ 58.285120] ___sys_sendmsg+0x86/0xd0
> [ 58.285151] ? lock_is_held_type+0xe3/0x140
> [ 58.285165] ? find_held_lock+0x2b/0x80
> [ 58.285182] ? lock_is_held_type+0xe3/0x140
> [ 58.285202] ? rcu_read_lock_sched_held+0x3f/0x80
> [ 58.285215] ? kfree+0x365/0x5c0
> [ 58.285238] __sys_sendmsg+0x47/0x80
> [ 58.285269] ? syscall_enter_from_user_mode+0x22/0xc0
> [ 58.285282] do_syscall_64+0x5b/0x80
> [ 58.285289] ? do_syscall_64+0x67/0x80
> [ 58.285297] ? lockdep_hardirqs_on+0x7d/0x100
> [ 58.285308] ? do_syscall_64+0x67/0x80
> [ 58.285318] ? do_syscall_64+0x67/0x80
> [ 58.285326] ? lockdep_hardirqs_on+0x7d/0x100
> [ 58.285337] entry_SYSCALL_64_after_hwframe+0x63/0xcd
> [ 58.285344] RIP: 0033:0x7feddd1318e4
> [ 58.285354] Code: 15 41 45 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 1d cd 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
> [ 58.285360] RSP: 002b:00007ffdc089f898 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
> [ 58.285369] RAX: ffffffffffffffda RBX: 000055c1579c4880 RCX: 00007feddd1318e4
> [ 58.285374] RDX: 0000000000000000 RSI: 00007ffdc089f8d0 RDI: 0000000000000006
> [ 58.285379] RBP: 000055c157a41910 R08: 0000000000000004 R09: 00007feddd1f73e0
> [ 58.285384] R10: 00007ffdc089f9b0 R11: 0000000000000202 R12: 000055c1579c4790
> [ 58.285389] R13: 00007ffdc089f8d0 R14: 0000000000000000 R15: 00007ffdc089f9b0
> [ 58.285431] </TASK>
> [ 58.285435] irq event stamp: 52662
> [ 58.285439] hardirqs last enabled at (52668): [<ffffffff9d184a6e>] __up_console_sem+0x5e/0x70
> [ 58.285449] hardirqs last disabled at (52673): [<ffffffff9d184a53>] __up_console_sem+0x43/0x70
> [ 58.285457] softirqs last enabled at (51810): [<ffffffff9ddec003>] packet_poll+0xd3/0x140
> [ 58.285466] softirqs last disabled at (51934): [<ffffffffc1414692>] ieee80211_tx_control_port+0x282/0x5a0 [mac80211]
> [ 58.285520] ---[ end trace 0000000000000000 ]---
>
> If this is indeed considered an issue with the core I hope that these
> traces might help pinpoint the issue.
>
> Regards,
>
> Hans
>
>
> Hans de Goede (1):
> wifi: rt2x00: Fix "Error - Attempt to send packet over invalid queue 2"
>
> drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> --
> 2.37.2
>
Hi,
On 9/15/22 20:56, Stanislaw Gruszka wrote:
> On Thu, Sep 08, 2022 at 07:36:18PM +0200, Hans de Goede wrote:
>> Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver
>> is seeing tx skbs submitted to it with the queue-id set to 2 / set to
>> IEEE80211_AC_BE on a rt2500 card when associating with an access-point.
>
> I'm impressed you have still working rt2500 card :-)
I recently become the owner of a Turion64 based MSI S270 laptop to test
some kernel code I was refactoring on. This has a mini-pci rt2500 card,
which indeed still works after this fix.
The thing has 2G RAM and even runs a Fedora 37 beta but the CPU is
quite slow and gets pretty toasty.
>> This causes rt2x00queue_get_tx_queue() to return NULL and the following
>> error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to
>> send packet over invalid queue 2", after which association with the AP
>> fails.
>>
>> This patch works around this by mapping QID_AC_BE and QID_AC_BK
>> to QID_AC_VI when there are only 2 tx_queues.
>>
>> Signed-off-by: Hans de Goede <[email protected]>
>
> Acked-by: Stanislaw Gruszka <[email protected]>
Thanks.
Regards,
Hans
Hi,
On 9/15/22 21:01, Stanislaw Gruszka wrote:
> On Thu, Sep 08, 2022 at 07:36:17PM +0200, Hans de Goede wrote:
>> I'm seeing the mac80211 core submitting skb-s with queue-ids >= hw.queues
>> on a ralink rt2500 PCI card which causes rt2x00queue_get_tx_queue() to
>> return NULL and the following error to be logged: "ieee80211 phy0:
>> rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
>> after which association with the AP fails.
>>
>> I have a hunch that although I've come up with a quick fix in the rt2x00
>> driver, that this is really an issue with the mac80211 core and that
>> the core should never submit skb-s where skb_get_queue_mapping()
>> returns a value >= ieee80211_hw.queues ?
>
> Yes, most likely this is mac80211 problem and other prehistoric cards
> will not work.
>
> Maybe this commit is related to the issue ?
>
> commit 10cb8e617560fc050a759a897a2dde07a5fe04cb
> Author: Markus Theil <[email protected]>
> Date: Sat Feb 6 12:51:12 2021 +0100
>
> mac80211: enable QoS support for nl80211 ctrl port
>
> If someone have time, could look at it, but not sure if we
> have any working hardware except yours rt2500 that require this :-)
Thanks, that commit indeed is the culprit. I have prepared a fix for
this at the mac80211 core level. I just need to write a commit message
now and then I will submit it upstream.
Regards,
Hans
>> Because of this hunch I have added a WARN_ON(1) when the workaround
>> triggered to see what I would get. This results in the following
>> 2 backtraces just after associating with my ISP provisioned access-point:
>>
>> [ 58.263794] ------------[ cut here ]------------
>> [ 58.263831] WARNING: CPU: 0 PID: 662 at drivers/net/wireless/ralink/rt2x00/rt2x00.h:1316 rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
>> [ 58.263856] Modules linked in: rt2500pci(E) rt2x00pci(E) rt2x00mmio(E) rt2x00lib(E) mac80211 libarc4 snd_atiixp_modem snd_atiixp snd_ac97_codec ac97_bus cfg80211 snd_seq snd_seq_device snd_pcm joydev edac_mce_amd snd_timer 8139too eeprom_93cx6 pcspkr snd 8139cp mii k8temp soundcore qrtr rfkill i2c_piix4 zram amdgpu iommu_v2 gpu_sched drm_buddy radeon video wmi sdhci_pci drm_ttm_helper cqhci ttm sdhci firewire_ohci drm_display_helper firewire_core mmc_core ata_generic pata_acpi serio_raw yenta_socket cec crc_itu_t pata_atiixp ip6_tables ip_tables i2c_dev fuse
>> [ 58.264061] CPU: 0 PID: 662 Comm: wpa_supplicant Tainted: G E 6.0.0-rc3+ #112
>> [ 58.264069] Hardware name: MICRO-STAR INT'L CO.,LTD MS-1013, BIOS A1013AMS V4.30 01/09/2006
>> [ 58.264074] RIP: 0010:rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
>> [ 58.264088] Code: 8b 54 24 08 49 89 f5 8b 4a 18 f6 43 28 20 0f 85 cb 00 00 00 44 0f b7 f8 41 8d 77 fe 83 fe 01 77 56 83 f9 02 0f 87 10 01 00 00 <0f> 0b 83 f9 02 75 12 4d 8b b4 24 98 11 00 00 b8 60 01 00 00 4d 85
>> [ 58.264094] RSP: 0018:ffffa30501c63780 EFLAGS: 00010246
>> [ 58.264103] RAX: 0000000000000002 RBX: ffff93df43ab3e00 RCX: 0000000000000002
>> [ 58.264108] RDX: ffffffffc123c4a0 RSI: 0000000000000000 RDI: ffff93df4b3c8e00
>> [ 58.264113] RBP: ffff93df4b3c8e00 R08: 0000000000000001 R09: 0000000000000001
>> [ 58.264118] R10: ffff93df49860000 R11: 000000000001103d R12: ffff93df4b3cb3c0
>> [ 58.264123] R13: ffffa30501c637e8 R14: ffff93df4b3c9440 R15: 0000000000000002
>> [ 58.264128] FS: 00007feddd63c7c0(0000) GS:ffff93dfb9c00000(0000) knlGS:0000000000000000
>> [ 58.264134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 58.264139] CR2: 0000557d841633c8 CR3: 000000000994a000 CR4: 00000000000006f0
>> [ 58.264145] Call Trace:
>> [ 58.264149] <TASK>
>> [ 58.264154] ? _raw_spin_unlock_irqrestore+0x30/0x60
>> [ 58.264176] ieee80211_process_measurement_req+0x2ca/0x890 [mac80211]
>> [ 58.264274] ieee80211_next_txq+0x2162/0x2790 [mac80211]
>> [ 58.264335] ieee80211_tx_prepare_skb+0x250/0x290 [mac80211]
>> [ 58.264426] __ieee80211_subif_start_xmit+0x21f/0x410 [mac80211]
>> [ 58.264499] ieee80211_tx_control_port+0x2d5/0x5a0 [mac80211]
>> [ 58.264572] nl80211_tx_control_port+0x1cb/0x380 [cfg80211]
>> [ 58.264864] genl_family_rcv_msg_doit+0xd0/0x120
>> [ 58.264901] genl_rcv_msg+0xca/0x1c0
>> [ 58.264912] ? nl80211_prepare_wdev_dump+0x220/0x220 [cfg80211]
>> [ 58.265045] ? genl_get_cmd+0xe0/0xe0
>> [ 58.265057] netlink_rcv_skb+0x51/0x100
>> [ 58.265085] genl_rcv+0x24/0x40
>> [ 58.265092] netlink_unicast+0x168/0x250
>> [ 58.265109] netlink_sendmsg+0x242/0x4a0
>> [ 58.265138] sock_sendmsg+0x5f/0x70
>> [ 58.265149] ____sys_sendmsg+0x22e/0x270
>> [ 58.265157] ? import_iovec+0x17/0x20
>> [ 58.265166] ? copy_msghdr_from_user+0x5d/0x80
>> [ 58.265191] ___sys_sendmsg+0x86/0xd0
>> [ 58.265219] ? lock_is_held_type+0xe3/0x140
>> [ 58.265234] ? find_held_lock+0x2b/0x80
>> [ 58.265253] ? lock_is_held_type+0xe3/0x140
>> [ 58.265272] ? rcu_read_lock_sched_held+0x3f/0x80
>> [ 58.265284] ? kfree+0x365/0x5c0
>> [ 58.265309] __sys_sendmsg+0x47/0x80
>> [ 58.265339] ? syscall_enter_from_user_mode+0x22/0xc0
>> [ 58.265352] do_syscall_64+0x5b/0x80
>> [ 58.265370] ? asm_common_interrupt+0x22/0x40
>> [ 58.265379] ? lockdep_hardirqs_on+0x7d/0x100
>> [ 58.265390] entry_SYSCALL_64_after_hwframe+0x63/0xcd
>> [ 58.265396] RIP: 0033:0x7feddd1318e4
>> [ 58.265407] Code: 15 41 45 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 1d cd 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
>> [ 58.265413] RSP: 002b:00007ffdc089f4f8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
>> [ 58.265423] RAX: ffffffffffffffda RBX: 000055c1579c4880 RCX: 00007feddd1318e4
>> [ 58.265428] RDX: 0000000000000000 RSI: 00007ffdc089f530 RDI: 0000000000000006
>> [ 58.265433] RBP: 000055c157a41910 R08: 0000000000000004 R09: 000000000000000d
>> [ 58.265438] R10: 00007ffdc089f610 R11: 0000000000000202 R12: 000055c1579c4790
>> [ 58.265442] R13: 00007ffdc089f530 R14: 0000000000000000 R15: 00007ffdc089f610
>> [ 58.265485] </TASK>
>> [ 58.265489] irq event stamp: 51698
>> [ 58.265493] hardirqs last enabled at (51704): [<ffffffff9d184a6e>] __up_console_sem+0x5e/0x70
>> [ 58.265502] hardirqs last disabled at (51709): [<ffffffff9d184a53>] __up_console_sem+0x43/0x70
>> [ 58.265511] softirqs last enabled at (50976): [<ffffffff9d0fbc9d>] __irq_exit_rcu+0xed/0x160
>> [ 58.265520] softirqs last disabled at (50988): [<ffffffffc1414692>] ieee80211_tx_control_port+0x282/0x5a0 [mac80211]
>> [ 58.265574] ---[ end trace 0000000000000000 ]---
>>
>> Backtrace 2:
>>
>> [ 58.283734] ------------[ cut here ]------------
>> [ 58.283747] WARNING: CPU: 0 PID: 662 at drivers/net/wireless/ralink/rt2x00/rt2x00.h:1316 rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
>> [ 58.283774] Modules linked in: rt2500pci(E) rt2x00pci(E) rt2x00mmio(E) rt2x00lib(E) mac80211 libarc4 snd_atiixp_modem snd_atiixp snd_ac97_codec ac97_bus cfg80211 snd_seq snd_seq_device snd_pcm joydev edac_mce_amd snd_timer 8139too eeprom_93cx6 pcspkr snd 8139cp mii k8temp soundcore qrtr rfkill i2c_piix4 zram amdgpu iommu_v2 gpu_sched drm_buddy radeon video wmi sdhci_pci drm_ttm_helper cqhci ttm sdhci firewire_ohci drm_display_helper firewire_core mmc_core ata_generic pata_acpi serio_raw yenta_socket cec crc_itu_t pata_atiixp ip6_tables ip_tables i2c_dev fuse
>> [ 58.283986] CPU: 0 PID: 662 Comm: wpa_supplicant Tainted: G W E 6.0.0-rc3+ #112
>> [ 58.283994] Hardware name: MICRO-STAR INT'L CO.,LTD MS-1013, BIOS A1013AMS V4.30 01/09/2006
>> [ 58.283999] RIP: 0010:rt2x00mac_tx+0x59/0x3a0 [rt2x00lib]
>> [ 58.284015] Code: 8b 54 24 08 49 89 f5 8b 4a 18 f6 43 28 20 0f 85 cb 00 00 00 44 0f b7 f8 41 8d 77 fe 83 fe 01 77 56 83 f9 02 0f 87 10 01 00 00 <0f> 0b 83 f9 02 75 12 4d 8b b4 24 98 11 00 00 b8 60 01 00 00 4d 85
>> [ 58.284021] RSP: 0018:ffffa30501c63770 EFLAGS: 00010246
>> [ 58.284030] RAX: 0000000000000002 RBX: ffff93df43ab3400 RCX: 0000000000000002
>> [ 58.284035] RDX: ffffffffc123c4a0 RSI: 0000000000000000 RDI: ffff93df4b3c8e00
>> [ 58.284040] RBP: ffff93df4b3c8e00 R08: 0000000000000001 R09: 0000000000000001
>> [ 58.284045] R10: ffff93df49860000 R11: 0000000001761407 R12: ffff93df4b3cb3c0
>> [ 58.284050] R13: ffffa30501c637d8 R14: ffff93df4b3c9440 R15: 0000000000000002
>> [ 58.284056] FS: 00007feddd63c7c0(0000) GS:ffff93dfb9c00000(0000) knlGS:0000000000000000
>> [ 58.284062] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 58.284067] CR2: 000055c157a50668 CR3: 000000000994a000 CR4: 00000000000006f0
>> [ 58.284072] Call Trace:
>> [ 58.284080] <TASK>
>> [ 58.284084] ? _raw_spin_unlock_irqrestore+0x30/0x60
>> [ 58.284110] ieee80211_process_measurement_req+0x2ca/0x890 [mac80211]
>> [ 58.284216] ieee80211_next_txq+0x2162/0x2790 [mac80211]
>> [ 58.284278] ieee80211_tx_prepare_skb+0x250/0x290 [mac80211]
>> [ 58.284368] __ieee80211_subif_start_xmit+0x21f/0x410 [mac80211]
>> [ 58.284441] ieee80211_tx_control_port+0x2d5/0x5a0 [mac80211]
>> [ 58.284514] nl80211_tx_control_port+0x1cb/0x380 [cfg80211]
>> [ 58.284791] genl_family_rcv_msg_doit+0xd0/0x120
>> [ 58.284828] genl_rcv_msg+0xca/0x1c0
>> [ 58.284840] ? nl80211_prepare_wdev_dump+0x220/0x220 [cfg80211]
>> [ 58.284973] ? genl_get_cmd+0xe0/0xe0
>> [ 58.284985] netlink_rcv_skb+0x51/0x100
>> [ 58.285013] genl_rcv+0x24/0x40
>> [ 58.285022] netlink_unicast+0x168/0x250
>> [ 58.285038] netlink_sendmsg+0x242/0x4a0
>> [ 58.285067] sock_sendmsg+0x5f/0x70
>> [ 58.285078] ____sys_sendmsg+0x22e/0x270
>> [ 58.285087] ? import_iovec+0x17/0x20
>> [ 58.285095] ? copy_msghdr_from_user+0x5d/0x80
>> [ 58.285120] ___sys_sendmsg+0x86/0xd0
>> [ 58.285151] ? lock_is_held_type+0xe3/0x140
>> [ 58.285165] ? find_held_lock+0x2b/0x80
>> [ 58.285182] ? lock_is_held_type+0xe3/0x140
>> [ 58.285202] ? rcu_read_lock_sched_held+0x3f/0x80
>> [ 58.285215] ? kfree+0x365/0x5c0
>> [ 58.285238] __sys_sendmsg+0x47/0x80
>> [ 58.285269] ? syscall_enter_from_user_mode+0x22/0xc0
>> [ 58.285282] do_syscall_64+0x5b/0x80
>> [ 58.285289] ? do_syscall_64+0x67/0x80
>> [ 58.285297] ? lockdep_hardirqs_on+0x7d/0x100
>> [ 58.285308] ? do_syscall_64+0x67/0x80
>> [ 58.285318] ? do_syscall_64+0x67/0x80
>> [ 58.285326] ? lockdep_hardirqs_on+0x7d/0x100
>> [ 58.285337] entry_SYSCALL_64_after_hwframe+0x63/0xcd
>> [ 58.285344] RIP: 0033:0x7feddd1318e4
>> [ 58.285354] Code: 15 41 45 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 1d cd 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
>> [ 58.285360] RSP: 002b:00007ffdc089f898 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
>> [ 58.285369] RAX: ffffffffffffffda RBX: 000055c1579c4880 RCX: 00007feddd1318e4
>> [ 58.285374] RDX: 0000000000000000 RSI: 00007ffdc089f8d0 RDI: 0000000000000006
>> [ 58.285379] RBP: 000055c157a41910 R08: 0000000000000004 R09: 00007feddd1f73e0
>> [ 58.285384] R10: 00007ffdc089f9b0 R11: 0000000000000202 R12: 000055c1579c4790
>> [ 58.285389] R13: 00007ffdc089f8d0 R14: 0000000000000000 R15: 00007ffdc089f9b0
>> [ 58.285431] </TASK>
>> [ 58.285435] irq event stamp: 52662
>> [ 58.285439] hardirqs last enabled at (52668): [<ffffffff9d184a6e>] __up_console_sem+0x5e/0x70
>> [ 58.285449] hardirqs last disabled at (52673): [<ffffffff9d184a53>] __up_console_sem+0x43/0x70
>> [ 58.285457] softirqs last enabled at (51810): [<ffffffff9ddec003>] packet_poll+0xd3/0x140
>> [ 58.285466] softirqs last disabled at (51934): [<ffffffffc1414692>] ieee80211_tx_control_port+0x282/0x5a0 [mac80211]
>> [ 58.285520] ---[ end trace 0000000000000000 ]---
>>
>> If this is indeed considered an issue with the core I hope that these
>> traces might help pinpoint the issue.
>>
>> Regards,
>>
>> Hans
>>
>>
>> Hans de Goede (1):
>> wifi: rt2x00: Fix "Error - Attempt to send packet over invalid queue 2"
>>
>> drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> --
>> 2.37.2
>>
>
Hans de Goede <[email protected]> wrote:
> Even though ieee80211_hw.queues is set to 2, the ralink rt2x00 driver
> is seeing tx skbs submitted to it with the queue-id set to 2 / set to
> IEEE80211_AC_BE on a rt2500 card when associating with an access-point.
>
> This causes rt2x00queue_get_tx_queue() to return NULL and the following
> error to be logged: "ieee80211 phy0: rt2x00mac_tx: Error - Attempt to
> send packet over invalid queue 2", after which association with the AP
> fails.
>
> This patch works around this by mapping QID_AC_BE and QID_AC_BK
> to QID_AC_VI when there are only 2 tx_queues.
>
> Signed-off-by: Hans de Goede <[email protected]>
> Acked-by: Stanislaw Gruszka <[email protected]>
Patch applied to wireless-next.git, thanks.
f2c6e7ca3ee6 wifi: rt2x00: Fix "Error - Attempt to send packet over invalid queue 2"
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches