2009-04-17 13:13:46

by Christian Lamparter

[permalink] [raw]
Subject: [PATCH] p54: deactivate broken powersave function

This patch deactivates powersave in station mode.

It does not work correctly yet, so the code does more harm than good.

Reported-by: Johannes Berg <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
---
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 716c8a0..5368aa3 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -2641,11 +2641,8 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
priv->basic_rate_mask = 0x15f;
skb_queue_head_init(&priv->tx_queue);
dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_NOISE_DBM |
- IEEE80211_HW_BEACON_FILTER;
+ IEEE80211_HW_NOISE_DBM;

dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |