Please see patches containing driver for 60g card 'wil6210'
Following recommendations from Joe Perches and Luis R. Rodriguez,
I do not wait for 'dynamic hexdump' to merge - Greg KH says it
will not make to 3.8 - too late. Instead, I did patch that compensate
this functionality. It is submitted as separate one, to be easily
un-done when 'dynamic hexdump' patch merge.
There is some other work integrated since previous iteration:
- AP mode fixes
- IRQ code optimizations
- wmi.h that defines driver/firmware API, is now shared with the FW team
- experimental support for 3 MSI mode
- documentation included
Can it be finally merged this time? I't be happy to see it in 3.8.
Vladimir Kondratiev (3):
wireless: Driver for 60GHz card wil6210
wil6210: Local compensation for dynamic hexdump
wireless: integrate wil6210 driver into build
Documentation/networking/wil6210.txt | 292 +++++++
drivers/net/wireless/ath/Kconfig | 1 +
drivers/net/wireless/ath/Makefile | 1 +
drivers/net/wireless/ath/wil6210/Kconfig | 30 +
drivers/net/wireless/ath/wil6210/Makefile | 14 +
drivers/net/wireless/ath/wil6210/cfg80211.c | 565 ++++++++++++
drivers/net/wireless/ath/wil6210/dbg_hexdump.h | 32 +
drivers/net/wireless/ath/wil6210/debugfs.c | 603 +++++++++++++
drivers/net/wireless/ath/wil6210/interrupt.c | 471 ++++++++++
drivers/net/wireless/ath/wil6210/main.c | 407 +++++++++
drivers/net/wireless/ath/wil6210/netdev.c | 157 ++++
drivers/net/wireless/ath/wil6210/pcie_bus.c | 223 +++++
drivers/net/wireless/ath/wil6210/txrx.c | 892 +++++++++++++++++++
drivers/net/wireless/ath/wil6210/txrx.h | 362 ++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 363 ++++++++
drivers/net/wireless/ath/wil6210/wmi.c | 989 +++++++++++++++++++++
drivers/net/wireless/ath/wil6210/wmi.h | 1116 ++++++++++++++++++++++++
17 files changed, 6518 insertions(+)
create mode 100644 Documentation/networking/wil6210.txt
create mode 100644 drivers/net/wireless/ath/wil6210/Kconfig
create mode 100644 drivers/net/wireless/ath/wil6210/Makefile
create mode 100644 drivers/net/wireless/ath/wil6210/cfg80211.c
create mode 100644 drivers/net/wireless/ath/wil6210/dbg_hexdump.h
create mode 100644 drivers/net/wireless/ath/wil6210/debugfs.c
create mode 100644 drivers/net/wireless/ath/wil6210/interrupt.c
create mode 100644 drivers/net/wireless/ath/wil6210/main.c
create mode 100644 drivers/net/wireless/ath/wil6210/netdev.c
create mode 100644 drivers/net/wireless/ath/wil6210/pcie_bus.c
create mode 100644 drivers/net/wireless/ath/wil6210/txrx.c
create mode 100644 drivers/net/wireless/ath/wil6210/txrx.h
create mode 100644 drivers/net/wireless/ath/wil6210/wil6210.h
create mode 100644 drivers/net/wireless/ath/wil6210/wmi.c
create mode 100644 drivers/net/wireless/ath/wil6210/wmi.h
--
1.7.10.4
On Thursday, December 13, 2012 12:51:16 PM Luis R. Rodriguez wrote:
> On Wed, Dec 12, 2012 at 06:25:06PM +0200, Vladimir Kondratiev wrote:
> > On Wednesday, December 12, 2012 05:04:38 PM Johannes Berg wrote:
> > > On Wed, 2012-12-12 at 17:47 +0200, Vladimir Kondratiev wrote:
> > >
> > > > Vladimir Kondratiev (3):
> > > > wireless: Driver for 60GHz card wil6210
> > >
> > > Since you didn't want to hear my objections on the iftype usage ...
> > > maybe you should not Cc me any more.
> > >
> > > johannes
> > >
> >
> > Johannes,
> >
> > I do hear it, and I agree with it!!!
> >
> > I will work to support this new
> > iftype, PBSS, properly. I just don't have enough data to do it right
> > now. Thus, I want initial driver for the 1-st ever 60g card to be merged;
> > this will serve as test bed for the next framework modifications.
> >
> > I recall, you was asking me why do I pushing to do 60g related
> > infrastructure changes when no one driver exists. I want to address this
> > and then return to the infrastructure.
> >
> > Let's have at least something working as 1-st step. Now, I need to assemble
> > all pieces of the puzzle:
> >
> > - initial infrastructure (done)
> > - minimal driver (these patches)
> > - tools (wpa_supplicant partially done, other patches sent; iw - partially done)
> > - regulatory - patches submitted.
> >
> > Then, when minimal support will be in place, I can handle new features.
> >
> > Hope it explain why I want to merge minimal driver 1-st.
>
> Vladimir, please only enable monitor support and STA mode to
> be used on the upstream driver submission. If you want PCP mode
> you'll have to address Johannes' concerns. If you want to enable
> PCP mode as you have you can enable it by enabling it through an
> extra crap/ category patch on compat-drivers.
>
> Luis
Due to progress in firmware development, now I can do even better:
Please find below patch where supported is "true" AP mode;
PCP support dropped.
Changes are mostly in the firmware, but few lines changed
in the driver as well.
Johannes: does this address your concerns?
John: can this driver get to 3.8? Is it correct,
"driver for new hardware" is eligible even if merge window already opened?
To sort all the stuff, patch set is:
1) this patch, [PATCH v11] wireless: Driver for 60GHz card wil6210
2) one of: [PATCH v10 2/3] wil6210: Local compensation for dynamic hexdump
or: [PATCH] wil6210: alternative functions for dynamic hexdump
3) [PATCH v10 3/3] wireless: integrate wil6210 driver into build
I can re-submit all 3 patches as one set if it will serve better; just
please indicate opinions about patch 2) - which one should I pick.
Thanks, Vladimir
>From fb3a6f8eb9bff805a91af70245f2f62980d2390f Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <[email protected]>
Date: Wed, 12 Dec 2012 16:53:32 +0200
Subject: [PATCH v11] wireless: Driver for 60GHz card wil6210
Card wil6210 by Wilocity supports operation on the 60GHz band,
accordingly to the 802.11ad standard.
This development snapshot supports:
- STA, AP and monitor modes
- security works for STA mode, not integrated yet for the AP mode
- AP limited to 1 connected STA
Using the STA and AP mode, one can assemble fully functional BSS.
throughput of 1.2Gbps achieved with iperf
To start AP mode, use wpa_supplicant or hostapd.
For wpa_supplicant, use config like:
network={
ssid="test"
mode=2
frequency=60480
key_mgmt=NONE
}
Patch for wpa_supplicant/hostapd submitted.
In the monitor mode, card is able to capture either control or non-control frames
(due to hardware/firmware limitation).
Wil6210 card have on-board flash memory for the firmware, card comes pre-flushed
and no firmware download required on the run time.
Refer to the Documentation/networking/wil6210.txt for more info.
Wiki available at http://wireless.kernel.org/en/users/Drivers/wil6210
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
Documentation/networking/wil6210.txt | 292 +++++++
drivers/net/wireless/ath/wil6210/Kconfig | 30 +
drivers/net/wireless/ath/wil6210/Makefile | 14 +
drivers/net/wireless/ath/wil6210/cfg80211.c | 573 +++++++++++++
drivers/net/wireless/ath/wil6210/debugfs.c | 603 ++++++++++++++
drivers/net/wireless/ath/wil6210/interrupt.c | 471 +++++++++++
drivers/net/wireless/ath/wil6210/main.c | 407 ++++++++++
drivers/net/wireless/ath/wil6210/netdev.c | 157 ++++
drivers/net/wireless/ath/wil6210/pcie_bus.c | 223 +++++
drivers/net/wireless/ath/wil6210/txrx.c | 871 ++++++++++++++++++++
drivers/net/wireless/ath/wil6210/txrx.h | 362 +++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 361 +++++++++
drivers/net/wireless/ath/wil6210/wmi.c | 975 ++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/wmi.h | 1116 ++++++++++++++++++++++++++
14 files changed, 6455 insertions(+)
create mode 100644 Documentation/networking/wil6210.txt
create mode 100644 drivers/net/wireless/ath/wil6210/Kconfig
create mode 100644 drivers/net/wireless/ath/wil6210/Makefile
create mode 100644 drivers/net/wireless/ath/wil6210/cfg80211.c
create mode 100644 drivers/net/wireless/ath/wil6210/debugfs.c
create mode 100644 drivers/net/wireless/ath/wil6210/interrupt.c
create mode 100644 drivers/net/wireless/ath/wil6210/main.c
create mode 100644 drivers/net/wireless/ath/wil6210/netdev.c
create mode 100644 drivers/net/wireless/ath/wil6210/pcie_bus.c
create mode 100644 drivers/net/wireless/ath/wil6210/txrx.c
create mode 100644 drivers/net/wireless/ath/wil6210/txrx.h
create mode 100644 drivers/net/wireless/ath/wil6210/wil6210.h
create mode 100644 drivers/net/wireless/ath/wil6210/wmi.c
create mode 100644 drivers/net/wireless/ath/wil6210/wmi.h
diff --git a/Documentation/networking/wil6210.txt b/Documentation/networking/wil6210.txt
new file mode 100644
index 0000000..24fcc51
--- /dev/null
+++ b/Documentation/networking/wil6210.txt
@@ -0,0 +1,292 @@
+Driver for wil6210 wireless network card.
+=========================================
+
+Copyright (c) 2012 Qualcomm Atheros, Inc.
+<[email protected]>
+
+Introduction
+============
+
+The wil6210 is 60GHz wireless card by Wilocity.
+It provides WiFi and wireless PCIE connectivity, as described in
+the WiGig WBE spec.
+
+This is PCIE device. It is combined with Atheros 2.4/5.2 GHz WiFi card.
+On the PCI, it is represented as the following hierarchy:
+
+1ae9:0101-+-1ae9:0201---168c:0034
+ +-1ae9:0201---1ae9:0301
+ +-1ae9:0201
+ \-1ae9:0201
+
+Chip consists of 1ae9:0101 is root bridge, with 4 ports 1ae9:0201.
+One port routed to separate Atheros card 168c:0034, it is handled by the
+ath9k driver.
+Another port connected to the wil6210 device 1ae9:0301, that is on chip.
+2 empty ports may be populated when connecting in WBE mode.
+
+wil6210 device, 1ae9:0301, has one 2Mb BAR.
+
+Network features
+================
+
+For the WiFi connection, it implements 802.11ad spec.
+Supported are channels 1..3 with corresponded frequencies
+58320, 60480, 62640 MHz.
+
+wil6210 use cfg80211 framework, but not mac80211.
+
+Modes supported are:
+
+- monitor
+- managed (station)
+- AP
+
+Driver designed in a way that hardware start running only when network
+interface brought up, with either 'ifconfig up' or starting AP. All settings
+made before are cached in the driver but not passed to the hardware.
+
+iw commands supported
+---------------------
+
+iw link: query link status. Report current MCS.
+
+Module parameters
+=================
+
+- rtap_include_phy_info
+ Include PHY info in the radiotap header, default - no (bool)
+- use_msi
+ Use MSI interrupt: 0 - don't, 1 - (default) - single, or 3 (int)
+- debug_fw
+ load driver if FW not ready. For FW debug (bool)
+
+wil6210 support set of interrupt handling modes:
+
+- INTx - legacy pin interrupt. Do not use if possible.
+- 1MSI - one MSI interrupt. This is the default mode.
+- 3MSI - 3 MSI interrupts for {Tx, Rx, Misc}.
+
+For interrupt handling mode, probed is highest one specified with @use_msi,
+with fallback:
+
+3MSI -> 1MSI -> INTx
+
+On the x86 platform, multiple MSI interrupts are not supported with recent
+kernel (3.7).
+
+When @debug_fw set to true, driver probe will not fail if firmware do not
+report "ready" event. This is to aid firmware boot issues debugging.
+
+Sniffer
+=======
+
+To configure wil6210 in sniffer mode (assume $WLAN set to network
+interface name):
+
+# iw $WLAN set type monitor
+
+Due to hardware/firmware deficiency, sniffer can capture either only
+control PHY (CP) or only data PHY (DP). To configure for desired PHY type
+do, after configuring for monitor mode:
+
+For CP:
+# iw $WLAN set monitor control
+For DP:
+# iw $WLAN set monitor none
+
+Finally, bring interface up:
+
+# ifconfig $WLAN up
+
+Examples for AP mode
+====================
+
+AP mode may be started using wpa_supplicant of hostapd. Use latest development
+snapshot of wpa_supplicant.
+
+For the wpa_supplicant, start AP in non-secure mode with config:
+
+---cut---
+ap_scan=2
+
+network={
+ frequency=60480
+ ssid="the_ssid_string"
+ mode=2
+ key_mgmt=NONE
+}
+---cut---
+
+To start secure AP, use config:
+
+---cut---
+ap_scan=2
+
+network={
+ frequency=60480
+ ssid="secure_ap"
+ psk="passphrase"
+ mode=2
+ key_mgmt=WPA-PSK
+ proto=RSN
+ pairwise=GCMP
+ group=GCMP
+}
+---cut---
+
+WMI commands
+============
+
+Control communication with the card is done through so called WMI commands
+and events. Target access to the mailbox within memory in BAR0 used.
+There are 2 similar mailbox structures: one for host->card commands, and one
+for card->host events.
+
+Tx/Rx
+=====
+
+DMA using 'vring' structures. Vring in consistent memory; hold descriptors
+that points to the data buffers. Card to write status back to the descriptor.
+
+There is one Rx vring. Tx vrings - multiple, per DA*TID.
+
+Debug facilities
+================
+
+Dynamic debug
+-------------
+
+Almost all messages printed to the dmesg, are "dynamic debug" ones.
+See Documentation/dynamic-debug-howto.txt for details.
+Module "wil6210" uses format prefixes to identify message groups:
+
+- "DBG[ IRQ]" for interrupt related messages. Prints every IRQ.
+- "DBG[TXRX]" for Tx/Rx path. Prints every Tx/Rx package.
+- "DBG[ WMI]" for WMI commands subsystem
+
+Groups IRQ and TXRX are heavy traffic; enable only when required.
+Group WMI is relatively low traffic, it prints only WMI messages.
+It is good idea to enable it when debugging.
+
+Debugfs
+-------
+
+All debugfs files placed under standard location for the cfg80211 devices,
+$DEBUGFS/ieee80211/$PHY/ where $PHY is phy name like 'phy1'.
+
+All wil6210 specific files placed under directory 'wil6210'.
+Facilities provided:
+
+- register access. All ICR (Interrupt Control Registers) groups represented as
+ directories, with entries per register, allowing read/write.
+ ITR (Interrupt Threshold Registers) represented as well.
+
+- raw memory access. All memory sections represented as 'blob' files, providing
+ read only access to the memory on card. Sections include:
+
++-------------------------------+---------------+
+| blob_xxx | BAR0 | Size | Comment |
+| file name | offset | | |
++-----------+---------+---------+---------------+
+| rgf | 0x0 | 0xa000 | Register file |
+| fw_code | 0x40000 | 0x40000 | FW code |
+| fw_data | 0x80000 | 0x8000 | FW data |
+| fw_peri | 0x88000 | 0x18000 | FW peripheral |
+| uc_code | 0xa0000 | 0x10000 | Ucode code |
+| uc_data | 0xb0000 | 0x4000 | Ucode data |
++-----------+---------+---------+---------------+
+
+Raw memory access used by firmware/ucode trace extractor. See below. Also,
+raw memory dump may be obtained for later analysis.
+
+- DWORD memory read, as FW see it. Files 'mem_addr' and 'mem_val' provide
+ access to the memory, using FW addresses (FW memory mapping is somewhat
+ different from what host see in BAR0). Write address to the 'mem_addr', then
+ read 'mem_val'. It will reads like "[0x%08x] = 0x%08x\n", addr, value
+
+- mailbox for WMI commands events. File 'mbox' reads like:
+
+ring tx = {
+ base = 0x008802e8
+ size = 0x0028 bytes -> 5 entries
+ tail = 0x00880300
+ head = 0x00880300
+ entry size = 1288
+ [ 0] E 0x00842490 -> 1fc9 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 1] E 0x00841f88 -> 1fca 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 2] E 0x00841a80 -> 1fcb 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 3] E th 0x00841578 -> 1fc7 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 4] E 0x00841070 -> 1fc8 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+}
+ring rx = {
+ base = 0x00880318
+ size = 0x0040 bytes -> 8 entries
+ tail = 0x00880320
+ head = 0x00880320
+ entry size = 256
+ [ 0] E 0x00842f98 -> 24f8 000c 0000 00
+ : 00 00 0a 10 00 00 00 00 00 00 00 00
+ [ 1] E th 0x00000000 -> 2020 0f80 0000 c0
+ [ 2] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 3] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 4] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 5] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 6] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 7] E 0x00000000 -> 2020 0f80 0000 c0
+}
+
+There are 2 separate rings, one for Tx, or host->card commands; and 2-nd
+for Rx, or card->host events.
+
+Printed for each ring (all addresses in FW memory mapping):
+ - base address of ring in card's memory
+ - ring size in bytes and entries
+ - tail and head pointers
+ - max. entry size. It is fake for Rx - FW may allocate entry of arbitrary size
+ - mailbox entries, format for entry:
+
+
+ /-- 'E' for empty entry, 'F' for full
+ | /+-- 't' for tail, 'h' for head
+ | ||
+ index | || address /-mbox header---\ [seq,len,type,flags]
+ v v vv v v v
+ [ 3] E th 0x00841578 -> 1fc7 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ \--buffer content (if valid)------------------/
+
+- Tx/Rx DMA Vrings. File 'vrings' reads as:
+
+VRING rx = {
+ pa = 0x00000000bb075000
+ va = 0xffff8800bb075000
+ size = 128
+ swtail = 127
+ swhead = 0
+ hwtail = [0x008813c8] -> 0x0000007f
+HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHS
+}
+
+There is one block for Rx DMA vring and one for every Tx DMA vring.
+
+Information printed:
+ - addresses, physical (pa) and virtual (va)
+ - size, entries
+ - software head and tail pointers
+ - hardware tail, format: [fw addr] -> value
+ - One letter per vring entry, 'H' for hardware owned and 'S'
+ for software owned ones.
+
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
new file mode 100644
index 0000000..209c00f
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -0,0 +1,30 @@
+config WIL6210
+ tristate "Wilocity 60g WiFi card wil6210 support"
+ depends on CFG80211
+ depends on PCI
+ default n
+ ---help---
+ This module adds support for wireless adapter based on
+ wil6210 chip by Wilocity. It supports operation on the
+ 60g band, covered by the IEEE802.11ad standard. See
+ Documentation/networking/wil6210.txt and
+ http://wireless.kernel.org/en/users/Drivers/wil6210
+ for more information.
+ If you choose to build it as a module, it will be called
+ wil6210
+
+config WIL6210_ISR_COR
+ bool "Use Clear-On-Read mode for ISR registers for wil6210"
+ depends on WIL6210
+ default y
+ ---help---
+ ISR registers on wil6210 chip may operate in either
+ COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode.
+ For production code, use COR (say y); is default since
+ it saves extra target transaction;
+ For ISR debug, use W1C (say n); is allows to monitor ISR
+ registers with debugfs. If COR were used, ISR would
+ self-clear when accessed for debug purposes, it makes
+ such monitoring impossible.
+ Say y unless you debug interrupts
+
diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
new file mode 100644
index 0000000..7713e4a
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_WIL6210) += wil6210.o
+
+wil6210-objs := main.o
+wil6210-objs += netdev.o
+wil6210-objs += cfg80211.o
+wil6210-objs += pcie_bus.o
+wil6210-objs += debugfs.o
+wil6210-objs += wmi.o
+wil6210-objs += interrupt.o
+wil6210-objs += txrx.o
+
+subdir-ccflags-y += -Werror
+subdir-ccflags-y += -D__CHECK_ENDIAN__
+
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
new file mode 100644
index 0000000..116f4e8
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -0,0 +1,573 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <net/cfg80211.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+
+#define CHAN60G(_channel, _flags) { \
+ .band = IEEE80211_BAND_60GHZ, \
+ .center_freq = 56160 + (2160 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 40, \
+}
+
+static struct ieee80211_channel wil_60ghz_channels[] = {
+ CHAN60G(1, 0),
+ CHAN60G(2, 0),
+ CHAN60G(3, 0),
+/* channel 4 not supported yet */
+};
+
+static struct ieee80211_supported_band wil_band_60ghz = {
+ .channels = wil_60ghz_channels,
+ .n_channels = ARRAY_SIZE(wil_60ghz_channels),
+ .ht_cap = {
+ .ht_supported = true,
+ .cap = 0, /* TODO */
+ .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, /* TODO */
+ .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, /* TODO */
+ .mcs = {
+ /* MCS 1..12 - SC PHY */
+ .rx_mask = {0xfe, 0x1f}, /* 1..12 */
+ .tx_params = IEEE80211_HT_MCS_TX_DEFINED, /* TODO */
+ },
+ },
+};
+
+static const struct ieee80211_txrx_stypes
+wil_mgmt_stypes[NUM_NL80211_IFTYPES] = {
+ [NL80211_IFTYPE_STATION] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_AP] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_P2P_CLIENT] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_P2P_GO] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+};
+
+static const u32 wil_cipher_suites[] = {
+ WLAN_CIPHER_SUITE_GCMP,
+};
+
+int wil_iftype_nl2wmi(enum nl80211_iftype type)
+{
+ static const struct {
+ enum nl80211_iftype nl;
+ enum wmi_network_type wmi;
+ } __nl2wmi[] = {
+ {NL80211_IFTYPE_ADHOC, WMI_NETTYPE_ADHOC},
+ {NL80211_IFTYPE_STATION, WMI_NETTYPE_INFRA},
+ {NL80211_IFTYPE_AP, WMI_NETTYPE_AP},
+ {NL80211_IFTYPE_P2P_CLIENT, WMI_NETTYPE_P2P},
+ {NL80211_IFTYPE_P2P_GO, WMI_NETTYPE_P2P},
+ {NL80211_IFTYPE_MONITOR, WMI_NETTYPE_ADHOC}, /* FIXME */
+ };
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(__nl2wmi); i++) {
+ if (__nl2wmi[i].nl == type)
+ return __nl2wmi[i].wmi;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int wil_cfg80211_get_station(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 *mac, struct station_info *sinfo)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ int rc;
+ struct wmi_notify_req_cmd cmd = {
+ .cid = 0,
+ .interval_usec = 0,
+ };
+
+ if (memcmp(mac, wil->dst_addr[0], ETH_ALEN))
+ return -ENOENT;
+
+ /* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
+ rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
+ WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
+ if (rc)
+ return rc;
+
+ sinfo->generation = wil->sinfo_gen;
+
+ sinfo->filled |= STATION_INFO_TX_BITRATE;
+ sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
+ sinfo->txrate.mcs = wil->stats.bf_mcs;
+ sinfo->filled |= STATION_INFO_RX_BITRATE;
+ sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
+ sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
+
+ if (test_bit(wil_status_fwconnected, &wil->status)) {
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = 12; /* TODO: provide real value */
+ }
+
+ return 0;
+}
+
+static int wil_cfg80211_change_iface(struct wiphy *wiphy,
+ struct net_device *ndev,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+
+ switch (type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_P2P_GO:
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ if (flags)
+ wil->monitor_flags = *flags;
+ else
+ wil->monitor_flags = 0;
+
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ wdev->iftype = type;
+
+ return 0;
+}
+
+static int wil_cfg80211_scan(struct wiphy *wiphy,
+ struct cfg80211_scan_request *request)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+ struct {
+ struct wmi_start_scan_cmd cmd;
+ u16 chnl[4];
+ } __packed cmd;
+ uint i, n;
+
+ if (wil->scan_request) {
+ wil_err(wil, "Already scanning\n");
+ return -EAGAIN;
+ }
+
+ /* check we are client side */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ break;
+ default:
+ return -EOPNOTSUPP;
+
+ }
+
+ /* FW don't support scan after connection attempt */
+ if (test_bit(wil_status_dontscan, &wil->status)) {
+ wil_err(wil, "Scan after connect attempt not supported\n");
+ return -EBUSY;
+ }
+
+ wil->scan_request = request;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd.num_channels = 0;
+ n = min(request->n_channels, 4U);
+ for (i = 0; i < n; i++) {
+ int ch = request->channels[i]->hw_value;
+ if (ch == 0) {
+ wil_err(wil,
+ "Scan requested for unknown frequency %dMhz\n",
+ request->channels[i]->center_freq);
+ continue;
+ }
+ /* 0-based channel indexes */
+ cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1;
+ wil_dbg(wil, "Scan for ch %d : %d MHz\n", ch,
+ request->channels[i]->center_freq);
+ }
+
+ return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
+ cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
+}
+
+static int wil_cfg80211_connect(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_connect_params *sme)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct cfg80211_bss *bss;
+ struct wmi_connect_cmd conn;
+ const u8 *ssid_eid;
+ const u8 *rsn_eid;
+ int ch;
+ int rc = 0;
+
+ bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
+ sme->ssid, sme->ssid_len,
+ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+ if (!bss) {
+ wil_err(wil, "Unable to find BSS\n");
+ return -ENOENT;
+ }
+
+ ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
+ if (!ssid_eid) {
+ wil_err(wil, "No SSID\n");
+ rc = -ENOENT;
+ goto out;
+ }
+
+ rsn_eid = sme->ie ?
+ cfg80211_find_ie(WLAN_EID_RSN, sme->ie, sme->ie_len) :
+ NULL;
+ if (rsn_eid) {
+ if (sme->ie_len > WMI_MAX_IE_LEN) {
+ rc = -ERANGE;
+ wil_err(wil, "IE too large (%td bytes)\n",
+ sme->ie_len);
+ goto out;
+ }
+ /*
+ * For secure assoc, send:
+ * (1) WMI_DELETE_CIPHER_KEY_CMD
+ * (2) WMI_SET_APPIE_CMD
+ */
+ rc = wmi_del_cipher_key(wil, 0, bss->bssid);
+ if (rc) {
+ wil_err(wil, "WMI_DELETE_CIPHER_KEY_CMD failed\n");
+ goto out;
+ }
+ /* WMI_SET_APPIE_CMD */
+ rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie);
+ if (rc) {
+ wil_err(wil, "WMI_SET_APPIE_CMD failed\n");
+ goto out;
+ }
+ }
+
+ /* WMI_CONNECT_CMD */
+ memset(&conn, 0, sizeof(conn));
+ switch (bss->capability & 0x03) {
+ case WLAN_CAPABILITY_DMG_TYPE_AP:
+ conn.network_type = WMI_NETTYPE_INFRA;
+ break;
+ case WLAN_CAPABILITY_DMG_TYPE_PBSS:
+ conn.network_type = WMI_NETTYPE_P2P;
+ break;
+ default:
+ wil_err(wil, "Unsupported BSS type, capability= 0x%04x\n",
+ bss->capability);
+ goto out;
+ }
+ if (rsn_eid) {
+ conn.dot11_auth_mode = WMI_AUTH11_SHARED;
+ conn.auth_mode = WMI_AUTH_WPA2_PSK;
+ conn.pairwise_crypto_type = WMI_CRYPT_AES_GCMP;
+ conn.pairwise_crypto_len = 16;
+ } else {
+ conn.dot11_auth_mode = WMI_AUTH11_OPEN;
+ conn.auth_mode = WMI_AUTH_NONE;
+ }
+
+ conn.ssid_len = min_t(u8, ssid_eid[1], 32);
+ memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
+
+ ch = bss->channel->hw_value;
+ if (ch == 0) {
+ wil_err(wil, "BSS at unknown frequency %dMhz\n",
+ bss->channel->center_freq);
+ rc = -EOPNOTSUPP;
+ goto out;
+ }
+ conn.channel = ch - 1;
+
+ memcpy(conn.bssid, bss->bssid, 6);
+ memcpy(conn.dst_mac, bss->bssid, 6);
+ /*
+ * FW don't support scan after connection attempt
+ */
+ set_bit(wil_status_dontscan, &wil->status);
+
+ rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
+ if (rc == 0) {
+ /* Connect can take lots of time */
+ mod_timer(&wil->connect_timer,
+ jiffies + msecs_to_jiffies(2000));
+ }
+
+ out:
+ cfg80211_put_bss(bss);
+
+ return rc;
+}
+
+static int wil_cfg80211_disconnect(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u16 reason_code)
+{
+ int rc;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
+
+ return rc;
+}
+
+static int wil_cfg80211_set_channel(struct wiphy *wiphy,
+ struct cfg80211_chan_def *chandef)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wdev->preset_chandef = *chandef;
+
+ return 0;
+}
+
+static int wil_cfg80211_add_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool pairwise,
+ const u8 *mac_addr,
+ struct key_params *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ /* group key is not used */
+ if (!pairwise)
+ return 0;
+
+ return wmi_add_cipher_key(wil, key_index, mac_addr,
+ params->key_len, params->key);
+}
+
+static int wil_cfg80211_del_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool pairwise,
+ const u8 *mac_addr)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ /* group key is not used */
+ if (!pairwise)
+ return 0;
+
+ return wmi_del_cipher_key(wil, key_index, mac_addr);
+}
+
+/* Need to be present or wiphy_new() will WARN */
+static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool unicast,
+ bool multicast)
+{
+ return 0;
+}
+
+static int wil_cfg80211_start_ap(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_ap_settings *info)
+{
+ int rc = 0;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ struct ieee80211_channel *channel = info->chandef.chan;
+ struct cfg80211_beacon_data *bcon = &info->beacon;
+ u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ if (!channel) {
+ wil_err(wil, "AP: No channel???\n");
+ return -EINVAL;
+ }
+
+ wil_dbg(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
+ channel->center_freq, info->privacy ? "secure" : "open");
+ print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
+ info->ssid, info->ssid_len);
+
+ rc = wil_reset(wil);
+ if (rc)
+ return rc;
+
+ rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
+ if (rc)
+ return rc;
+
+ rc = wmi_set_channel(wil, channel->hw_value);
+ if (rc)
+ return rc;
+
+ /* MAC address - pre-requisite for other commands */
+ wmi_set_mac_address(wil, ndev->dev_addr);
+
+ /* IE's */
+ /* bcon 'head IE's are not relevant for 60g band */
+ wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
+ bcon->beacon_ies);
+ wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
+ bcon->proberesp_ies);
+ wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
+ bcon->assocresp_ies);
+
+ wil->secure_pcp = info->privacy;
+
+ rc = wmi_set_bcon(wil, info->beacon_interval, wmi_nettype);
+ if (rc)
+ return rc;
+
+ /* Rx VRING. After MAC and beacon */
+ rc = wil_rx_init(wil);
+
+ netif_carrier_on(ndev);
+
+ return rc;
+}
+
+static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
+ struct net_device *ndev)
+{
+ int rc = 0;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ /* To stop beaconing, set BI to 0 */
+ rc = wmi_set_bcon(wil, 0, wmi_nettype);
+
+ return rc;
+}
+
+static struct cfg80211_ops wil_cfg80211_ops = {
+ .scan = wil_cfg80211_scan,
+ .connect = wil_cfg80211_connect,
+ .disconnect = wil_cfg80211_disconnect,
+ .change_virtual_intf = wil_cfg80211_change_iface,
+ .get_station = wil_cfg80211_get_station,
+ .set_monitor_channel = wil_cfg80211_set_channel,
+ .add_key = wil_cfg80211_add_key,
+ .del_key = wil_cfg80211_del_key,
+ .set_default_key = wil_cfg80211_set_default_key,
+ /* AP mode */
+ .start_ap = wil_cfg80211_start_ap,
+ .stop_ap = wil_cfg80211_stop_ap,
+};
+
+static void wil_wiphy_init(struct wiphy *wiphy)
+{
+ /* TODO: set real value */
+ wiphy->max_scan_ssids = 10;
+ wiphy->max_num_pmkids = 0 /* TODO: */;
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MONITOR);
+ /* TODO: enable P2P when integrated with supplicant:
+ * BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO)
+ */
+ wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
+ WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+ dev_warn(wiphy_dev(wiphy), "%s : flags = 0x%08x\n",
+ __func__, wiphy->flags);
+ wiphy->probe_resp_offload =
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+
+ wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz;
+
+ /* TODO: figure this out */
+ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+ wiphy->cipher_suites = wil_cipher_suites;
+ wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
+ wiphy->mgmt_stypes = wil_mgmt_stypes;
+}
+
+struct wireless_dev *wil_cfg80211_init(struct device *dev)
+{
+ int rc = 0;
+ struct wireless_dev *wdev;
+
+ wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+ if (!wdev)
+ return ERR_PTR(-ENOMEM);
+
+ wdev->wiphy = wiphy_new(&wil_cfg80211_ops,
+ sizeof(struct wil6210_priv));
+ if (!wdev->wiphy) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ set_wiphy_dev(wdev->wiphy, dev);
+ wil_wiphy_init(wdev->wiphy);
+
+ rc = wiphy_register(wdev->wiphy);
+ if (rc < 0)
+ goto out_failed_reg;
+
+ return wdev;
+
+out_failed_reg:
+ wiphy_free(wdev->wiphy);
+out:
+ kfree(wdev);
+
+ return ERR_PTR(rc);
+}
+
+void wil_wdev_free(struct wil6210_priv *wil)
+{
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+
+ if (!wdev)
+ return;
+
+ wiphy_unregister(wdev->wiphy);
+ wiphy_free(wdev->wiphy);
+ kfree(wdev);
+}
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
new file mode 100644
index 0000000..65fc968
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -0,0 +1,603 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pci.h>
+#include <linux/rtnetlink.h>
+
+#include "wil6210.h"
+#include "txrx.h"
+
+/* Nasty hack. Better have per device instances */
+static u32 mem_addr;
+static u32 dbg_txdesc_index;
+
+static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
+ const char *name, struct vring *vring)
+{
+ void __iomem *x = wmi_addr(wil, vring->hwtail);
+
+ seq_printf(s, "VRING %s = {\n", name);
+ seq_printf(s, " pa = 0x%016llx\n", (unsigned long long)vring->pa);
+ seq_printf(s, " va = 0x%p\n", vring->va);
+ seq_printf(s, " size = %d\n", vring->size);
+ seq_printf(s, " swtail = %d\n", vring->swtail);
+ seq_printf(s, " swhead = %d\n", vring->swhead);
+ seq_printf(s, " hwtail = [0x%08x] -> ", vring->hwtail);
+ if (x)
+ seq_printf(s, "0x%08x\n", ioread32(x));
+ else
+ seq_printf(s, "???\n");
+
+ if (vring->va && (vring->size < 1025)) {
+ uint i;
+ for (i = 0; i < vring->size; i++) {
+ volatile struct vring_tx_desc *d = &vring->va[i].tx;
+ if ((i % 64) == 0 && (i != 0))
+ seq_printf(s, "\n");
+ seq_printf(s, "%s", (d->dma.status & BIT(0)) ?
+ "S" : (vring->ctx[i] ? "H" : "h"));
+ }
+ seq_printf(s, "\n");
+ }
+ seq_printf(s, "}\n");
+}
+
+static int wil_vring_debugfs_show(struct seq_file *s, void *data)
+{
+ uint i;
+ struct wil6210_priv *wil = s->private;
+
+ wil_print_vring(s, wil, "rx", &wil->vring_rx);
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+ struct vring *vring = &(wil->vring_tx[i]);
+ if (vring->va) {
+ char name[10];
+ snprintf(name, sizeof(name), "tx_%2d", i);
+ wil_print_vring(s, wil, name, vring);
+ }
+ }
+
+ return 0;
+}
+
+static int wil_vring_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_vring_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_vring = {
+ .open = wil_vring_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static void wil_print_ring(struct seq_file *s, const char *prefix,
+ void __iomem *off)
+{
+ struct wil6210_priv *wil = s->private;
+ struct wil6210_mbox_ring r;
+ int rsize;
+ uint i;
+
+ wil_memcpy_fromio_32(&r, off, sizeof(r));
+ wil_mbox_ring_le2cpus(&r);
+ /*
+ * we just read memory block from NIC. This memory may be
+ * garbage. Check validity before using it.
+ */
+ rsize = r.size / sizeof(struct wil6210_mbox_ring_desc);
+
+ seq_printf(s, "ring %s = {\n", prefix);
+ seq_printf(s, " base = 0x%08x\n", r.base);
+ seq_printf(s, " size = 0x%04x bytes -> %d entries\n", r.size, rsize);
+ seq_printf(s, " tail = 0x%08x\n", r.tail);
+ seq_printf(s, " head = 0x%08x\n", r.head);
+ seq_printf(s, " entry size = %d\n", r.entry_size);
+
+ if (r.size % sizeof(struct wil6210_mbox_ring_desc)) {
+ seq_printf(s, " ??? size is not multiple of %zd, garbage?\n",
+ sizeof(struct wil6210_mbox_ring_desc));
+ goto out;
+ }
+
+ if (!wmi_addr(wil, r.base) ||
+ !wmi_addr(wil, r.tail) ||
+ !wmi_addr(wil, r.head)) {
+ seq_printf(s, " ??? pointers are garbage?\n");
+ goto out;
+ }
+
+ for (i = 0; i < rsize; i++) {
+ struct wil6210_mbox_ring_desc d;
+ struct wil6210_mbox_hdr hdr;
+ size_t delta = i * sizeof(d);
+ void __iomem *x = wil->csr + HOSTADDR(r.base) + delta;
+
+ wil_memcpy_fromio_32(&d, x, sizeof(d));
+
+ seq_printf(s, " [%2x] %s %s%s 0x%08x", i,
+ d.sync ? "F" : "E",
+ (r.tail - r.base == delta) ? "t" : " ",
+ (r.head - r.base == delta) ? "h" : " ",
+ le32_to_cpu(d.addr));
+ if (0 == wmi_read_hdr(wil, d.addr, &hdr)) {
+ u16 len = le16_to_cpu(hdr.len);
+ seq_printf(s, " -> %04x %04x %04x %02x\n",
+ le16_to_cpu(hdr.seq), len,
+ le16_to_cpu(hdr.type), hdr.flags);
+ if (len <= MAX_MBOXITEM_SIZE) {
+ int n = 0;
+ unsigned char printbuf[16 * 3 + 2];
+ unsigned char databuf[MAX_MBOXITEM_SIZE];
+ void __iomem *src = wmi_buffer(wil, d.addr) +
+ sizeof(struct wil6210_mbox_hdr);
+ /*
+ * No need to check @src for validity -
+ * we already validated @d.addr while
+ * reading header
+ */
+ wil_memcpy_fromio_32(databuf, src, len);
+ while (n < len) {
+ int l = min(len - n, 16);
+ hex_dump_to_buffer(databuf + n, l,
+ 16, 1, printbuf,
+ sizeof(printbuf),
+ false);
+ seq_printf(s, " : %s\n", printbuf);
+ n += l;
+ }
+ }
+ } else {
+ seq_printf(s, "\n");
+ }
+ }
+ out:
+ seq_printf(s, "}\n");
+}
+
+static int wil_mbox_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+
+ wil_print_ring(s, "tx", wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx));
+ wil_print_ring(s, "rx", wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx));
+
+ return 0;
+}
+
+static int wil_mbox_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_mbox_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_mbox = {
+ .open = wil_mbox_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static int wil_debugfs_iomem_x32_set(void *data, u64 val)
+{
+ iowrite32(val, (void __iomem *)data);
+ wmb(); /* make sure write propagated to HW */
+
+ return 0;
+}
+
+static int wil_debugfs_iomem_x32_get(void *data, u64 *val)
+{
+ *val = ioread32((void __iomem *)data);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_iomem_x32, wil_debugfs_iomem_x32_get,
+ wil_debugfs_iomem_x32_set, "0x%08llx\n");
+
+static struct dentry *wil_debugfs_create_iomem_x32(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ void __iomem *value)
+{
+ return debugfs_create_file(name, mode, parent, (void * __force)value,
+ &fops_iomem_x32);
+}
+
+static int wil6210_debugfs_create_ISR(struct wil6210_priv *wil,
+ const char *name,
+ struct dentry *parent, u32 off)
+{
+ struct dentry *d = debugfs_create_dir(name, parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("ICC", S_IRUGO | S_IWUSR, d,
+ wil->csr + off);
+ wil_debugfs_create_iomem_x32("ICR", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 4);
+ wil_debugfs_create_iomem_x32("ICM", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 8);
+ wil_debugfs_create_iomem_x32("ICS", S_IWUSR, d,
+ wil->csr + off + 12);
+ wil_debugfs_create_iomem_x32("IMV", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 16);
+ wil_debugfs_create_iomem_x32("IMS", S_IWUSR, d,
+ wil->csr + off + 20);
+ wil_debugfs_create_iomem_x32("IMC", S_IWUSR, d,
+ wil->csr + off + 24);
+
+ return 0;
+}
+
+static int wil6210_debugfs_create_pseudo_ISR(struct wil6210_priv *wil,
+ struct dentry *parent)
+{
+ struct dentry *d = debugfs_create_dir("PSEUDO_ISR", parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("CAUSE", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE));
+ wil_debugfs_create_iomem_x32("MASK_SW", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+ wil_debugfs_create_iomem_x32("MASK_FW", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_FW));
+
+ return 0;
+}
+
+static int wil6210_debugfs_create_ITR_CNT(struct wil6210_priv *wil,
+ struct dentry *parent)
+{
+ struct dentry *d = debugfs_create_dir("ITR_CNT", parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("TRSH", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_TRSH));
+ wil_debugfs_create_iomem_x32("DATA", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_DATA));
+ wil_debugfs_create_iomem_x32("CTL", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_CRL));
+
+ return 0;
+}
+
+static int wil_memread_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ void __iomem *a = wmi_buffer(wil, cpu_to_le32(mem_addr));
+
+ if (a)
+ seq_printf(s, "[0x%08x] = 0x%08x\n", mem_addr, ioread32(a));
+ else
+ seq_printf(s, "[0x%08x] = INVALID\n", mem_addr);
+
+ return 0;
+}
+
+static int wil_memread_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_memread_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_memread = {
+ .open = wil_memread_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static int wil_default_open(struct inode *inode, struct file *file)
+{
+ if (inode->i_private)
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ enum { max_count = 4096 };
+ struct debugfs_blob_wrapper *blob = file->private_data;
+ loff_t pos = *ppos;
+ size_t available = blob->size;
+ void *buf;
+ size_t ret;
+
+ if (pos < 0)
+ return -EINVAL;
+
+ if (pos >= available || !count)
+ return 0;
+
+ if (count > available - pos)
+ count = available - pos;
+ if (count > max_count)
+ count = max_count;
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ wil_memcpy_fromio_32(buf, (const volatile void __iomem *)blob->data +
+ pos, count);
+
+ ret = copy_to_user(user_buf, buf, count);
+ kfree(buf);
+ if (ret == count)
+ return -EFAULT;
+
+ count -= ret;
+ *ppos = pos + count;
+
+ return count;
+}
+
+static const struct file_operations fops_ioblob = {
+ .read = wil_read_file_ioblob,
+ .open = wil_default_open,
+ .llseek = default_llseek,
+};
+
+static
+struct dentry *wil_debugfs_create_ioblob(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ struct debugfs_blob_wrapper *blob)
+{
+ return debugfs_create_file(name, mode, parent, blob, &fops_ioblob);
+}
+/*---reset---*/
+static ssize_t wil_write_file_reset(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ /**
+ * BUG:
+ * this code does NOT sync device state with the rest of system
+ * use with care, debug only!!!
+ */
+ rtnl_lock();
+ dev_close(ndev);
+ ndev->flags &= ~IFF_UP;
+ rtnl_unlock();
+ wil_reset(wil);
+
+ return len;
+}
+
+static const struct file_operations fops_reset = {
+ .write = wil_write_file_reset,
+ .open = wil_default_open,
+};
+/*---------Tx descriptor------------*/
+
+static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ struct vring *vring = &(wil->vring_tx[0]);
+
+ if (!vring->va) {
+ seq_printf(s, "No Tx VRING\n");
+ return 0;
+ }
+
+ if (dbg_txdesc_index < vring->size) {
+ volatile struct vring_tx_desc *d =
+ &(vring->va[dbg_txdesc_index].tx);
+ volatile u32 *u = (volatile u32 *)d;
+ struct sk_buff *skb = vring->ctx[dbg_txdesc_index];
+
+ seq_printf(s, "Tx[%3d] = {\n", dbg_txdesc_index);
+ seq_printf(s, " MAC = 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ u[0], u[1], u[2], u[3]);
+ seq_printf(s, " DMA = 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ u[4], u[5], u[6], u[7]);
+ seq_printf(s, " SKB = %p\n", skb);
+
+ if (skb) {
+ unsigned char printbuf[16 * 3 + 2];
+ int i = 0;
+ int len = skb_headlen(skb);
+ void *p = skb->data;
+
+ seq_printf(s, " len = %d\n", len);
+
+ while (i < len) {
+ int l = min(len - i, 16);
+ hex_dump_to_buffer(p + i, l, 16, 1, printbuf,
+ sizeof(printbuf), false);
+ seq_printf(s, " : %s\n", printbuf);
+ i += l;
+ }
+ }
+ seq_printf(s, "}\n");
+ } else {
+ seq_printf(s, "TxDesc index (%d) >= size (%d)\n",
+ dbg_txdesc_index, vring->size);
+ }
+
+ return 0;
+}
+
+static int wil_txdesc_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_txdesc_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_txdesc = {
+ .open = wil_txdesc_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+/*---------beamforming------------*/
+static int wil_bf_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ seq_printf(s,
+ "TSF : 0x%016llx\n"
+ "TxMCS : %d\n"
+ "Sectors(rx:tx) my %2d:%2d peer %2d:%2d\n",
+ wil->stats.tsf, wil->stats.bf_mcs,
+ wil->stats.my_rx_sector, wil->stats.my_tx_sector,
+ wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
+ return 0;
+}
+
+static int wil_bf_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_bf_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_bf = {
+ .open = wil_bf_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+/*---------SSID------------*/
+static ssize_t wil_read_file_ssid(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+
+ return simple_read_from_buffer(user_buf, count, ppos,
+ wdev->ssid, wdev->ssid_len);
+}
+
+static ssize_t wil_write_file_ssid(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ if (*ppos != 0) {
+ wil_err(wil, "Unable to set SSID substring from [%d]\n",
+ (int)*ppos);
+ return -EINVAL;
+ }
+
+ if (count > sizeof(wdev->ssid)) {
+ wil_err(wil, "SSID too long, len = %d\n", (int)count);
+ return -EINVAL;
+ }
+ if (netif_running(ndev)) {
+ wil_err(wil, "Unable to change SSID on running interface\n");
+ return -EINVAL;
+ }
+
+ wdev->ssid_len = count;
+ return simple_write_to_buffer(wdev->ssid, wdev->ssid_len, ppos,
+ buf, count);
+}
+
+static const struct file_operations fops_ssid = {
+ .read = wil_read_file_ssid,
+ .write = wil_write_file_ssid,
+ .open = wil_default_open,
+};
+
+/*----------------*/
+int wil6210_debugfs_init(struct wil6210_priv *wil)
+{
+ struct dentry *dbg = wil->debug = debugfs_create_dir(WIL_NAME,
+ wil_to_wiphy(wil)->debugfsdir);
+
+ if (IS_ERR_OR_NULL(dbg))
+ return -ENODEV;
+
+ debugfs_create_file("mbox", S_IRUGO, dbg, wil, &fops_mbox);
+ debugfs_create_file("vrings", S_IRUGO, dbg, wil, &fops_vring);
+ debugfs_create_file("txdesc", S_IRUGO, dbg, wil, &fops_txdesc);
+ debugfs_create_u32("txdesc_index", S_IRUGO | S_IWUSR, dbg,
+ &dbg_txdesc_index);
+ debugfs_create_file("bf", S_IRUGO, dbg, wil, &fops_bf);
+ debugfs_create_file("ssid", S_IRUGO | S_IWUSR, dbg, wil, &fops_ssid);
+ debugfs_create_u32("secure_pcp", S_IRUGO | S_IWUSR, dbg,
+ &wil->secure_pcp);
+
+ wil6210_debugfs_create_ISR(wil, "USER_ICR", dbg,
+ HOSTADDR(RGF_USER_USER_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_TX_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_TX_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_RX_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_RX_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_MISC_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_MISC_ICR));
+ wil6210_debugfs_create_pseudo_ISR(wil, dbg);
+ wil6210_debugfs_create_ITR_CNT(wil, dbg);
+
+ debugfs_create_u32("mem_addr", S_IRUGO | S_IWUSR, dbg, &mem_addr);
+ debugfs_create_file("mem_val", S_IRUGO, dbg, wil, &fops_memread);
+
+ debugfs_create_file("reset", S_IWUSR, dbg, wil, &fops_reset);
+
+ wil->rgf_blob.data = (void * __force)wil->csr + 0;
+ wil->rgf_blob.size = 0xa000;
+ wil_debugfs_create_ioblob("blob_rgf", S_IRUGO, dbg, &wil->rgf_blob);
+
+ wil->fw_code_blob.data = (void * __force)wil->csr + 0x40000;
+ wil->fw_code_blob.size = 0x40000;
+ wil_debugfs_create_ioblob("blob_fw_code", S_IRUGO, dbg,
+ &wil->fw_code_blob);
+
+ wil->fw_data_blob.data = (void * __force)wil->csr + 0x80000;
+ wil->fw_data_blob.size = 0x8000;
+ wil_debugfs_create_ioblob("blob_fw_data", S_IRUGO, dbg,
+ &wil->fw_data_blob);
+
+ wil->fw_peri_blob.data = (void * __force)wil->csr + 0x88000;
+ wil->fw_peri_blob.size = 0x18000;
+ wil_debugfs_create_ioblob("blob_fw_peri", S_IRUGO, dbg,
+ &wil->fw_peri_blob);
+
+ wil->uc_code_blob.data = (void * __force)wil->csr + 0xa0000;
+ wil->uc_code_blob.size = 0x10000;
+ wil_debugfs_create_ioblob("blob_uc_code", S_IRUGO, dbg,
+ &wil->uc_code_blob);
+
+ wil->uc_data_blob.data = (void * __force)wil->csr + 0xb0000;
+ wil->uc_data_blob.size = 0x4000;
+ wil_debugfs_create_ioblob("blob_uc_data", S_IRUGO, dbg,
+ &wil->uc_data_blob);
+
+ return 0;
+}
+
+void wil6210_debugfs_remove(struct wil6210_priv *wil)
+{
+ debugfs_remove_recursive(wil->debug);
+ wil->debug = NULL;
+}
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
new file mode 100644
index 0000000..38049da
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -0,0 +1,471 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/interrupt.h>
+
+#include "wil6210.h"
+
+/**
+ * Theory of operation:
+ *
+ * There is ISR pseudo-cause register,
+ * dma_rgf->DMA_RGF.PSEUDO_CAUSE.PSEUDO_CAUSE
+ * Its bits represents OR'ed bits from 3 real ISR registers:
+ * TX, RX, and MISC.
+ *
+ * Registers may be configured to either "write 1 to clear" or
+ * "clear on read" mode
+ *
+ * When handling interrupt, one have to mask/unmask interrupts for the
+ * real ISR registers, or hardware may malfunction.
+ *
+ */
+
+#define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL)
+#define WIL6210_IMC_RX BIT_DMA_EP_RX_ICR_RX_DONE
+#define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \
+ BIT_DMA_EP_TX_ICR_TX_DONE_N(0))
+#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | ISR_MISC_MBOX_EVT)
+
+#define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \
+ BIT_DMA_PSEUDO_CAUSE_TX | \
+ BIT_DMA_PSEUDO_CAUSE_MISC))
+
+#if defined(CONFIG_WIL6210_ISR_COR)
+/* configure to Clear-On-Read mode */
+#define WIL_ICR_ICC_VALUE (0xFFFFFFFFUL)
+
+static inline void wil_icr_clear(u32 x, void __iomem *addr)
+{
+
+}
+#else /* defined(CONFIG_WIL6210_ISR_COR) */
+/* configure to Write-1-to-Clear mode */
+#define WIL_ICR_ICC_VALUE (0UL)
+
+static inline void wil_icr_clear(u32 x, void __iomem *addr)
+{
+ iowrite32(x, addr);
+}
+#endif /* defined(CONFIG_WIL6210_ISR_COR) */
+
+static inline u32 wil_ioread32_and_clear(void __iomem *addr)
+{
+ u32 x = ioread32(addr);
+
+ wil_icr_clear(x, addr);
+
+ return x;
+}
+
+static void wil6210_mask_irq_tx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_rx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_misc(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+
+ clear_bit(wil_status_irqen, &wil->status);
+}
+
+static void wil6210_unmask_irq_tx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_TX, wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_rx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_RX, wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_misc(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_MISC, wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ set_bit(wil_status_irqen, &wil->status);
+
+ iowrite32(WIL6210_IRQ_PSEUDO_MASK, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+}
+
+void wil6210_disable_irq(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ wil6210_mask_irq_tx(wil);
+ wil6210_mask_irq_rx(wil);
+ wil6210_mask_irq_misc(wil);
+ wil6210_mask_irq_pseudo(wil);
+}
+
+void wil6210_enable_irq(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+
+ wil6210_unmask_irq_pseudo(wil);
+ wil6210_unmask_irq_tx(wil);
+ wil6210_unmask_irq_rx(wil);
+ wil6210_unmask_irq_misc(wil);
+}
+
+static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR RX 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: RX\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_rx(wil);
+
+ if (isr & BIT_DMA_EP_RX_ICR_RX_DONE) {
+ wil_dbg_IRQ(wil, "RX done\n");
+ isr &= ~BIT_DMA_EP_RX_ICR_RX_DONE;
+ wil_rx_handle(wil);
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled RX ISR bits 0x%08x\n", isr);
+
+ wil6210_unmask_irq_rx(wil);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR TX 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: TX\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_tx(wil);
+
+ if (isr & BIT_DMA_EP_TX_ICR_TX_DONE) {
+ uint i;
+ wil_dbg_IRQ(wil, "TX done\n");
+ isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
+ for (i = 0; i < 24; i++) {
+ u32 mask = BIT_DMA_EP_TX_ICR_TX_DONE_N(i);
+ if (isr & mask) {
+ isr &= ~mask;
+ wil_dbg_IRQ(wil, "TX done(%i)\n", i);
+ wil_tx_complete(wil, i);
+ }
+ }
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled TX ISR bits 0x%08x\n", isr);
+
+ wil6210_unmask_irq_tx(wil);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR MISC 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: MISC\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_misc(wil);
+
+ if (isr & ISR_MISC_FW_READY) {
+ wil_dbg_IRQ(wil, "IRQ: FW ready\n");
+ /**
+ * Actual FW ready indicated by the
+ * WMI_FW_READY_EVENTID
+ */
+ isr &= ~ISR_MISC_FW_READY;
+ }
+
+ wil->isr_misc = isr;
+
+ if (isr) {
+ return IRQ_WAKE_THREAD;
+ } else {
+ wil6210_unmask_irq_misc(wil);
+ return IRQ_HANDLED;
+ }
+}
+
+static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil->isr_misc;
+
+ wil_dbg_IRQ(wil, "Thread ISR MISC 0x%08x\n", isr);
+
+ if (isr & ISR_MISC_MBOX_EVT) {
+ wil_dbg_IRQ(wil, "MBOX event\n");
+ wmi_recv_cmd(wil);
+ isr &= ~ISR_MISC_MBOX_EVT;
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled MISC ISR bits 0x%08x\n", isr);
+
+ wil->isr_misc = 0;
+
+ wil6210_unmask_irq_misc(wil);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * thread IRQ handler
+ */
+static irqreturn_t wil6210_thread_irq(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+
+ wil_dbg_IRQ(wil, "Thread IRQ\n");
+ /* Discover real IRQ cause */
+ if (wil->isr_misc)
+ wil6210_irq_misc_thread(irq, cookie);
+
+ wil6210_unmask_irq_pseudo(wil);
+
+ return IRQ_HANDLED;
+}
+
+/* DEBUG
+ * There is subtle bug in hardware that causes IRQ to raise when it should be
+ * masked. It is quite rare and hard to debug.
+ *
+ * Catch irq issue if it happens and print all I can.
+ */
+static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause)
+{
+ if (!test_bit(wil_status_irqen, &wil->status)) {
+ u32 icm_rx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_rx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_rx = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ u32 icm_tx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_tx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_tx = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ u32 icm_misc = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_misc = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_misc = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ wil_err(wil, "IRQ when it should be masked: pseudo 0x%08x\n"
+ "Rx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
+ "Tx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
+ "Misc icm:icr:imv 0x%08x 0x%08x 0x%08x\n",
+ pseudo_cause,
+ icm_rx, icr_rx, imv_rx,
+ icm_tx, icr_tx, imv_tx,
+ icm_misc, icr_misc, imv_misc);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t wil6210_hardirq(int irq, void *cookie)
+{
+ irqreturn_t rc = IRQ_HANDLED;
+ struct wil6210_priv *wil = cookie;
+ u32 pseudo_cause = ioread32(wil->csr + HOSTADDR(RGF_DMA_PSEUDO_CAUSE));
+
+ /**
+ * pseudo_cause is Clear-On-Read, no need to ACK
+ */
+ if ((pseudo_cause == 0) || ((pseudo_cause & 0xff) == 0xff))
+ return IRQ_NONE;
+
+ /* FIXME: IRQ mask debug */
+ if (wil6210_debug_irq_mask(wil, pseudo_cause))
+ return IRQ_NONE;
+
+ wil6210_mask_irq_pseudo(wil);
+
+ /* Discover real IRQ cause
+ * There are 2 possible phases for every IRQ:
+ * - hard IRQ handler called right here
+ * - threaded handler called later
+ *
+ * Hard IRQ handler reads and clears ISR.
+ *
+ * If threaded handler requested, hard IRQ handler
+ * returns IRQ_WAKE_THREAD and saves ISR register value
+ * for the threaded handler use.
+ *
+ * voting for wake thread - need at least 1 vote
+ */
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_RX) &&
+ (wil6210_irq_rx(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_TX) &&
+ (wil6210_irq_tx(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_MISC) &&
+ (wil6210_irq_misc(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ /* if thread is requested, it will unmask IRQ */
+ if (rc != IRQ_WAKE_THREAD)
+ wil6210_unmask_irq_pseudo(wil);
+
+ wil_dbg_IRQ(wil, "Hard IRQ 0x%08x\n", pseudo_cause);
+
+ return rc;
+}
+
+static int wil6210_request_3msi(struct wil6210_priv *wil, int irq)
+{
+ int rc;
+ /*
+ * IRQ's are in the following order:
+ * - Tx
+ * - Rx
+ * - Misc
+ */
+
+ rc = request_irq(irq, wil6210_irq_tx, IRQF_SHARED,
+ WIL_NAME"_tx", wil);
+ if (rc)
+ return rc;
+
+ rc = request_irq(irq + 1, wil6210_irq_rx, IRQF_SHARED,
+ WIL_NAME"_rx", wil);
+ if (rc)
+ goto free0;
+
+ rc = request_threaded_irq(irq + 2, wil6210_irq_misc,
+ wil6210_irq_misc_thread,
+ IRQF_SHARED, WIL_NAME"_misc", wil);
+ if (rc)
+ goto free1;
+
+ return 0;
+ /* error branch */
+free1:
+ free_irq(irq + 1, wil);
+free0:
+ free_irq(irq, wil);
+
+ return rc;
+}
+
+int wil6210_init_irq(struct wil6210_priv *wil, int irq)
+{
+ int rc;
+ if (wil->n_msi == 3)
+ rc = wil6210_request_3msi(wil, irq);
+ else
+ rc = request_threaded_irq(irq, wil6210_hardirq,
+ wil6210_thread_irq,
+ wil->n_msi ? 0 : IRQF_SHARED,
+ WIL_NAME, wil);
+ if (rc)
+ return rc;
+
+ wil6210_enable_irq(wil);
+
+ return 0;
+}
+
+void wil6210_fini_irq(struct wil6210_priv *wil, int irq)
+{
+ wil6210_disable_irq(wil);
+ free_irq(irq, wil);
+ if (wil->n_msi == 3) {
+ free_irq(irq + 1, wil);
+ free_irq(irq + 2, wil);
+ }
+}
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
new file mode 100644
index 0000000..95fcd36
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -0,0 +1,407 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/if_arp.h>
+
+#include "wil6210.h"
+
+/*
+ * Due to a hardware issue,
+ * one has to read/write to/from NIC in 32-bit chunks;
+ * regular memcpy_fromio and siblings will
+ * not work on 64-bit platform - it uses 64-bit transactions
+ *
+ * Force 32-bit transactions to enable NIC on 64-bit platforms
+ *
+ * To avoid byte swap on big endian host, __raw_{read|write}l
+ * should be used - {read|write}l would swap bytes to provide
+ * little endian on PCI value in host endianness.
+ */
+void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
+ size_t count)
+{
+ u32 *d = dst;
+ const volatile u32 __iomem *s = src;
+
+ /* size_t is unsigned, if (count%4 != 0) it will wrap */
+ for (count += 4; count > 4; count -= 4)
+ *d++ = __raw_readl(s++);
+}
+
+void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
+ size_t count)
+{
+ volatile u32 __iomem *d = dst;
+ const u32 *s = src;
+
+ for (count += 4; count > 4; count -= 4)
+ __raw_writel(*s++, d++);
+}
+
+static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
+{
+ uint i;
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ wil_link_off(wil);
+ clear_bit(wil_status_fwconnected, &wil->status);
+
+ switch (wdev->sme_state) {
+ case CFG80211_SME_CONNECTED:
+ cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE,
+ NULL, 0, GFP_KERNEL);
+ break;
+ case CFG80211_SME_CONNECTING:
+ cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ GFP_KERNEL);
+ break;
+ default:
+ ;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
+ wil_vring_fini_tx(wil, i);
+}
+
+static void wil_disconnect_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work,
+ struct wil6210_priv, disconnect_worker);
+
+ _wil6210_disconnect(wil, NULL);
+}
+
+static void wil_connect_timer_fn(ulong x)
+{
+ struct wil6210_priv *wil = (void *)x;
+
+ wil_dbg(wil, "Connect timeout\n");
+
+ /* reschedule to thread context - disconnect won't
+ * run from atomic context
+ */
+ schedule_work(&wil->disconnect_worker);
+}
+
+int wil_priv_init(struct wil6210_priv *wil)
+{
+ wil_dbg(wil, "%s()\n", __func__);
+
+ mutex_init(&wil->mutex);
+ mutex_init(&wil->wmi_mutex);
+
+ init_completion(&wil->wmi_ready);
+
+ wil->pending_connect_cid = -1;
+ setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
+
+ INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker);
+ INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
+ INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
+
+ INIT_LIST_HEAD(&wil->pending_wmi_ev);
+ spin_lock_init(&wil->wmi_ev_lock);
+
+ wil->wmi_wq = create_singlethread_workqueue(WIL_NAME"_wmi");
+ if (!wil->wmi_wq)
+ return -EAGAIN;
+
+ wil->wmi_wq_conn = create_singlethread_workqueue(WIL_NAME"_connect");
+ if (!wil->wmi_wq_conn) {
+ destroy_workqueue(wil->wmi_wq);
+ return -EAGAIN;
+ }
+
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+
+ return 0;
+}
+
+void wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
+{
+ del_timer_sync(&wil->connect_timer);
+ _wil6210_disconnect(wil, bssid);
+}
+
+void wil_priv_deinit(struct wil6210_priv *wil)
+{
+ cancel_work_sync(&wil->disconnect_worker);
+ wil6210_disconnect(wil, NULL);
+ wmi_event_flush(wil);
+ destroy_workqueue(wil->wmi_wq_conn);
+ destroy_workqueue(wil->wmi_wq);
+}
+
+static void wil_target_reset(struct wil6210_priv *wil)
+{
+ wil_dbg(wil, "Resetting...\n");
+
+ /* register write */
+#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
+ /* register set = read, OR, write */
+#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
+ wil->csr + HOSTADDR(a))
+
+ /* hpal_perst_from_pad_src_n_mask */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
+ /* car_perst_rst_src_n_mask */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7));
+
+ W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
+ W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
+
+ msleep(100);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
+
+ msleep(100);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+
+ msleep(2000);
+
+ W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */
+
+ msleep(2000);
+
+ wil_dbg(wil, "Reset completed\n");
+
+#undef W
+#undef S
+}
+
+void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
+{
+ le32_to_cpus(&r->base);
+ le16_to_cpus(&r->entry_size);
+ le16_to_cpus(&r->size);
+ le32_to_cpus(&r->tail);
+ le32_to_cpus(&r->head);
+}
+
+static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
+{
+ ulong to = msecs_to_jiffies(1000);
+ ulong left = wait_for_completion_timeout(&wil->wmi_ready, to);
+ if (0 == left) {
+ wil_err(wil, "Firmware not ready\n");
+ return -ETIME;
+ } else {
+ wil_dbg(wil, "FW ready after %d ms\n",
+ jiffies_to_msecs(to-left));
+ }
+ return 0;
+}
+
+/*
+ * We reset all the structures, and we reset the UMAC.
+ * After calling this routine, you're expected to reload
+ * the firmware.
+ */
+int wil_reset(struct wil6210_priv *wil)
+{
+ int rc;
+
+ cancel_work_sync(&wil->disconnect_worker);
+ wil6210_disconnect(wil, NULL);
+
+ wmi_event_flush(wil);
+
+ flush_workqueue(wil->wmi_wq);
+ flush_workqueue(wil->wmi_wq_conn);
+
+ wil6210_disable_irq(wil);
+ wil->status = 0;
+
+ /* TODO: put MAC in reset */
+ wil_target_reset(wil);
+
+ /* init after reset */
+ wil->pending_connect_cid = -1;
+ INIT_COMPLETION(wil->wmi_ready);
+
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+
+ /* TODO: release MAC reset */
+ wil6210_enable_irq(wil);
+
+ /* we just started MAC, wait for FW ready */
+ rc = wil_wait_for_fw_ready(wil);
+
+ return rc;
+}
+
+
+void wil_link_on(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ netif_carrier_on(ndev);
+ netif_tx_wake_all_queues(ndev);
+}
+
+void wil_link_off(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ netif_tx_stop_all_queues(ndev);
+ netif_carrier_off(ndev);
+}
+
+static int __wil_up(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct ieee80211_channel *channel = wdev->preset_chandef.chan;
+ int rc;
+ int bi;
+ u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ rc = wil_reset(wil);
+ if (rc)
+ return rc;
+
+ /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
+ wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ wil_dbg(wil, "type: STATION\n");
+ bi = 0;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_AP:
+ wil_dbg(wil, "type: AP\n");
+ bi = 100;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_P2P_CLIENT:
+ wil_dbg(wil, "type: P2P_CLIENT\n");
+ bi = 0;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_P2P_GO:
+ wil_dbg(wil, "type: P2P_GO\n");
+ bi = 100;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ wil_dbg(wil, "type: Monitor\n");
+ bi = 0;
+ ndev->type = ARPHRD_IEEE80211_RADIOTAP;
+ /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ /* Apply profile in the following order: */
+ /* SSID and channel for the AP */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
+ if (wdev->ssid_len == 0) {
+ wil_err(wil, "SSID not set\n");
+ return -EINVAL;
+ }
+ wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
+ if (channel)
+ wmi_set_channel(wil, channel->hw_value);
+ break;
+ default:
+ ;
+ }
+
+ /* MAC address - pre-requisite for other commands */
+ wmi_set_mac_address(wil, ndev->dev_addr);
+
+ /* Set up beaconing if required. */
+ rc = wmi_set_bcon(wil, bi, wmi_nettype);
+ if (rc)
+ return rc;
+
+ /* Rx VRING. After MAC and beacon */
+ wil_rx_init(wil);
+
+ return 0;
+}
+
+int wil_up(struct wil6210_priv *wil)
+{
+ int rc;
+
+ mutex_lock(&wil->mutex);
+ rc = __wil_up(wil);
+ mutex_unlock(&wil->mutex);
+
+ return rc;
+}
+
+static int __wil_down(struct wil6210_priv *wil)
+{
+ if (wil->scan_request) {
+ cfg80211_scan_done(wil->scan_request, true);
+ wil->scan_request = NULL;
+ }
+
+ wil6210_disconnect(wil, NULL);
+ wil_rx_fini(wil);
+
+ return 0;
+}
+
+int wil_down(struct wil6210_priv *wil)
+{
+ int rc;
+
+ mutex_lock(&wil->mutex);
+ rc = __wil_down(wil);
+ mutex_unlock(&wil->mutex);
+
+ return rc;
+}
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
new file mode 100644
index 0000000..3068b5c
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/slab.h>
+
+#include "wil6210.h"
+
+static int wil_open(struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_up(wil);
+}
+
+static int wil_stop(struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_down(wil);
+}
+
+/*
+ * AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static u16 wil_select_queue(struct net_device *ndev, struct sk_buff *skb)
+{
+ static const u16 wil_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ u16 rc;
+
+ skb->priority = cfg80211_classify8021d(skb);
+
+ rc = wil_1d_to_queue[skb->priority];
+
+ wil_dbg_TXRX(wil, "%s() %d -> %d\n", __func__, (int)skb->priority,
+ (int)rc);
+
+ return rc;
+}
+
+static const struct net_device_ops wil_netdev_ops = {
+ .ndo_open = wil_open,
+ .ndo_stop = wil_stop,
+ .ndo_start_xmit = wil_start_xmit,
+ .ndo_select_queue = wil_select_queue,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr)
+{
+ struct net_device *ndev;
+ struct wireless_dev *wdev;
+ struct wil6210_priv *wil;
+ struct ieee80211_channel *ch;
+ int rc = 0;
+
+ wdev = wil_cfg80211_init(dev);
+ if (IS_ERR(wdev)) {
+ dev_err(dev, "wil_cfg80211_init failed\n");
+ return wdev;
+ }
+
+ wil = wdev_to_wil(wdev);
+ wil->csr = csr;
+ wil->wdev = wdev;
+
+ rc = wil_priv_init(wil);
+ if (rc) {
+ dev_err(dev, "wil_priv_init failed\n");
+ goto out_wdev;
+ }
+
+ wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
+ /* default monitor channel */
+ ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
+ cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
+
+ ndev = alloc_netdev_mqs(0, "wlan%d", ether_setup, WIL6210_TX_QUEUES, 1);
+ if (!ndev) {
+ dev_err(dev, "alloc_netdev_mqs failed\n");
+ rc = -ENOMEM;
+ goto out_priv;
+ }
+
+ ndev->netdev_ops = &wil_netdev_ops;
+ ndev->ieee80211_ptr = wdev;
+ SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
+ wdev->netdev = ndev;
+
+ wil_link_off(wil);
+
+ return wil;
+
+ out_priv:
+ wil_priv_deinit(wil);
+
+ out_wdev:
+ wil_wdev_free(wil);
+
+ return ERR_PTR(rc);
+}
+
+void wil_if_free(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ if (!ndev)
+ return;
+
+ free_netdev(ndev);
+ wil_priv_deinit(wil);
+ wil_wdev_free(wil);
+}
+
+int wil_if_add(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ int rc;
+
+ rc = register_netdev(ndev);
+ if (rc < 0) {
+ dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
+ return rc;
+ }
+
+ wil_link_off(wil);
+
+ return 0;
+}
+
+void wil_if_remove(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ unregister_netdev(ndev);
+}
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
new file mode 100644
index 0000000..0fc83ed
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+
+static int use_msi = 1;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi,
+ " Use MSI interrupt: "
+ "0 - don't, 1 - (default) - single, or 3");
+
+/* Bus ops */
+static int wil_if_pcie_enable(struct wil6210_priv *wil)
+{
+ struct pci_dev *pdev = wil->pdev;
+ int rc;
+
+ pci_set_master(pdev);
+
+ /*
+ * how many MSI interrupts to request?
+ */
+ switch (use_msi) {
+ case 3:
+ case 1:
+ case 0:
+ break;
+ default:
+ wil_err(wil, "Invalid use_msi=%d, default to 1\n",
+ use_msi);
+ use_msi = 1;
+ }
+ wil->n_msi = use_msi;
+ if (wil->n_msi) {
+ wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi);
+ rc = pci_enable_msi_block(pdev, wil->n_msi);
+ if (rc && (wil->n_msi == 3)) {
+ wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
+ wil->n_msi = 1;
+ rc = pci_enable_msi_block(pdev, wil->n_msi);
+ }
+ if (rc) {
+ wil_err(wil, "pci_enable_msi failed, use INTx\n");
+ wil->n_msi = 0;
+ }
+ } else {
+ wil_dbg(wil, "MSI interrupts disabled, use INTx\n");
+ }
+
+ rc = wil6210_init_irq(wil, pdev->irq);
+ if (rc)
+ goto stop_master;
+
+ /* need reset here to obtain MAC */
+ rc = wil_reset(wil);
+ if (rc)
+ goto release_irq;
+
+ return 0;
+
+ release_irq:
+ wil6210_fini_irq(wil, pdev->irq);
+ /* safe to call if no MSI */
+ pci_disable_msi(pdev);
+ stop_master:
+ pci_clear_master(pdev);
+ return rc;
+}
+
+static int wil_if_pcie_disable(struct wil6210_priv *wil)
+{
+ struct pci_dev *pdev = wil->pdev;
+
+ pci_clear_master(pdev);
+ /* disable and release IRQ */
+ wil6210_fini_irq(wil, pdev->irq);
+ /* safe to call if no MSI */
+ pci_disable_msi(pdev);
+ /* TODO: disable HW */
+
+ return 0;
+}
+
+static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct wil6210_priv *wil;
+ struct device *dev = &pdev->dev;
+ void __iomem *csr;
+ int rc;
+
+ /* check HW */
+ dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n",
+ (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
+
+ if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
+ dev_err(&pdev->dev, "Not " WIL_NAME "? "
+ "BAR0 size is %lu while expecting %lu\n",
+ (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
+ return -ENODEV;
+ }
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ return -ENODEV;
+ }
+ /* rollback to err_disable_pdev */
+
+ rc = pci_request_region(pdev, 0, WIL_NAME);
+ if (rc) {
+ dev_err(&pdev->dev, "pci_request_region failed\n");
+ goto err_disable_pdev;
+ }
+ /* rollback to err_release_reg */
+
+ csr = pci_ioremap_bar(pdev, 0);
+ if (!csr) {
+ dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
+ rc = -ENODEV;
+ goto err_release_reg;
+ }
+ /* rollback to err_iounmap */
+ dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr);
+
+ wil = wil_if_alloc(dev, csr);
+ if (IS_ERR(wil)) {
+ rc = (int)PTR_ERR(wil);
+ dev_err(dev, "wil_if_alloc failed: %d\n", rc);
+ goto err_iounmap;
+ }
+ /* rollback to if_free */
+
+ pci_set_drvdata(pdev, wil);
+ wil->pdev = pdev;
+
+ /* FW should raise IRQ when ready */
+ rc = wil_if_pcie_enable(wil);
+ if (rc) {
+ wil_err(wil, "Enable device failed\n");
+ goto if_free;
+ }
+ /* rollback to bus_disable */
+
+ rc = wil_if_add(wil);
+ if (rc) {
+ wil_err(wil, "wil_if_add failed: %d\n", rc);
+ goto bus_disable;
+ }
+
+ wil6210_debugfs_init(wil);
+
+ /* check FW is alive */
+ wmi_echo(wil);
+
+ return 0;
+
+ bus_disable:
+ wil_if_pcie_disable(wil);
+ if_free:
+ wil_if_free(wil);
+ err_iounmap:
+ pci_iounmap(pdev, csr);
+ err_release_reg:
+ pci_release_region(pdev, 0);
+ err_disable_pdev:
+ pci_disable_device(pdev);
+
+ return rc;
+}
+
+static void wil_pcie_remove(struct pci_dev *pdev)
+{
+ struct wil6210_priv *wil = pci_get_drvdata(pdev);
+
+ wil6210_debugfs_remove(wil);
+ wil_if_pcie_disable(wil);
+ wil_if_remove(wil);
+ wil_if_free(wil);
+ pci_iounmap(pdev, wil->csr);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = {
+ { PCI_DEVICE(0x1ae9, 0x0301) },
+ { /* end: all zeroes */ },
+};
+MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
+
+static struct pci_driver wil6210_driver = {
+ .probe = wil_pcie_probe,
+ .remove = wil_pcie_remove,
+ .id_table = wil6210_pcie_ids,
+ .name = WIL_NAME,
+};
+
+module_pci_driver(wil6210_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Qualcomm Atheros <[email protected]>");
+MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
new file mode 100644
index 0000000..f29c294
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -0,0 +1,871 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/hardirq.h>
+#include <net/ieee80211_radiotap.h>
+#include <linux/if_arp.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+#include "txrx.h"
+
+static bool rtap_include_phy_info;
+module_param(rtap_include_phy_info, bool, S_IRUGO);
+MODULE_PARM_DESC(rtap_include_phy_info,
+ " Include PHY info in the radiotap header, default - no");
+
+static inline int wil_vring_is_empty(struct vring *vring)
+{
+ return vring->swhead == vring->swtail;
+}
+
+static inline u32 wil_vring_next_tail(struct vring *vring)
+{
+ return (vring->swtail + 1) % vring->size;
+}
+
+static inline void wil_vring_advance_head(struct vring *vring, int n)
+{
+ vring->swhead = (vring->swhead + n) % vring->size;
+}
+
+static inline int wil_vring_is_full(struct vring *vring)
+{
+ return wil_vring_next_tail(vring) == vring->swhead;
+}
+/*
+ * Available space in Tx Vring
+ */
+static inline int wil_vring_avail_tx(struct vring *vring)
+{
+ u32 swhead = vring->swhead;
+ u32 swtail = vring->swtail;
+ int used = (vring->size + swhead - swtail) % vring->size;
+
+ return vring->size - used - 1;
+}
+
+static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
+{
+ struct device *dev = wil_to_dev(wil);
+ size_t sz = vring->size * sizeof(vring->va[0]);
+ uint i;
+
+ BUILD_BUG_ON(sizeof(vring->va[0]) != 32);
+
+ vring->swhead = 0;
+ vring->swtail = 0;
+ vring->ctx = kzalloc(vring->size * sizeof(vring->ctx[0]), GFP_KERNEL);
+ if (!vring->ctx) {
+ wil_err(wil, "vring_alloc [%d] failed to alloc ctx mem\n",
+ vring->size);
+ vring->va = NULL;
+ return -ENOMEM;
+ }
+ /*
+ * vring->va should be aligned on its size rounded up to power of 2
+ * This is granted by the dma_alloc_coherent
+ */
+ vring->va = dma_alloc_coherent(dev, sz, &vring->pa, GFP_KERNEL);
+ if (!vring->va) {
+ wil_err(wil, "vring_alloc [%d] failed to alloc DMA mem\n",
+ vring->size);
+ kfree(vring->ctx);
+ vring->ctx = NULL;
+ return -ENOMEM;
+ }
+ /* initially, all descriptors are SW owned
+ * For Tx and Rx, ownership bit is at the same location, thus
+ * we can use any
+ */
+ for (i = 0; i < vring->size; i++) {
+ volatile struct vring_tx_desc *d = &(vring->va[i].tx);
+ d->dma.status = TX_DMA_STATUS_DU;
+ }
+
+ wil_dbg(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size,
+ vring->va, (unsigned long long)vring->pa, vring->ctx);
+
+ return 0;
+}
+
+static void wil_vring_free(struct wil6210_priv *wil, struct vring *vring,
+ int tx)
+{
+ struct device *dev = wil_to_dev(wil);
+ size_t sz = vring->size * sizeof(vring->va[0]);
+
+ while (!wil_vring_is_empty(vring)) {
+ if (tx) {
+ volatile struct vring_tx_desc *d =
+ &vring->va[vring->swtail].tx;
+ dma_addr_t pa = d->dma.addr_low |
+ ((u64)d->dma.addr_high << 32);
+ struct sk_buff *skb = vring->ctx[vring->swtail];
+ if (skb) {
+ dma_unmap_single(dev, pa, d->dma.length,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ vring->ctx[vring->swtail] = NULL;
+ } else {
+ dma_unmap_page(dev, pa, d->dma.length,
+ DMA_TO_DEVICE);
+ }
+ vring->swtail = wil_vring_next_tail(vring);
+ } else { /* rx */
+ volatile struct vring_rx_desc *d =
+ &vring->va[vring->swtail].rx;
+ dma_addr_t pa = d->dma.addr_low |
+ ((u64)d->dma.addr_high << 32);
+ struct sk_buff *skb = vring->ctx[vring->swhead];
+ dma_unmap_single(dev, pa, d->dma.length,
+ DMA_FROM_DEVICE);
+ kfree_skb(skb);
+ wil_vring_advance_head(vring, 1);
+ }
+ }
+ dma_free_coherent(dev, sz, (void *)vring->va, vring->pa);
+ kfree(vring->ctx);
+ vring->pa = 0;
+ vring->va = NULL;
+ vring->ctx = NULL;
+}
+
+/**
+ * Allocate one skb for Rx VRING
+ *
+ * Safe to call from IRQ
+ */
+static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring,
+ u32 i, int headroom)
+{
+ struct device *dev = wil_to_dev(wil);
+ unsigned int sz = RX_BUF_LEN;
+ volatile struct vring_rx_desc *d = &(vring->va[i].rx);
+ dma_addr_t pa;
+
+ /* TODO align */
+ struct sk_buff *skb = dev_alloc_skb(sz + headroom);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ skb_reserve(skb, headroom);
+ skb_put(skb, sz);
+
+ pa = dma_map_single(dev, skb->data, skb->len, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(dev, pa))) {
+ kfree_skb(skb);
+ return -ENOMEM;
+ }
+
+ d->dma.d0 = BIT(9) | RX_DMA_D0_CMD_DMA_IT;
+ d->dma.addr_low = lower_32_bits(pa);
+ d->dma.addr_high = (u16)upper_32_bits(pa);
+ /* ip_length don't care */
+ /* b11 don't care */
+ /* error don't care */
+ d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
+ d->dma.length = sz;
+ vring->ctx[i] = skb;
+
+ return 0;
+}
+
+/**
+ * Adds radiotap header
+ *
+ * Any error indicated as "Bad FCS"
+ *
+ * Vendor data for 04:ce:14-1 (Wilocity-1) consists of:
+ * - Rx descriptor: 32 bytes
+ * - Phy info
+ */
+static void wil_rx_add_radiotap_header(struct wil6210_priv *wil,
+ struct sk_buff *skb,
+ volatile struct vring_rx_desc *d)
+{
+ struct wireless_dev *wdev = wil->wdev;
+ struct wil6210_rtap {
+ struct ieee80211_radiotap_header rthdr;
+ /* fields should be in the order of bits in rthdr.it_present */
+ /* flags */
+ u8 flags;
+ /* channel */
+ __le16 chnl_freq __aligned(2);
+ __le16 chnl_flags;
+ /* MCS */
+ u8 mcs_present;
+ u8 mcs_flags;
+ u8 mcs_index;
+ } __packed;
+ struct wil6210_rtap_vendor {
+ struct wil6210_rtap rtap;
+ /* vendor */
+ u8 vendor_oui[3] __aligned(2);
+ u8 vendor_ns;
+ __le16 vendor_skip;
+ u8 vendor_data[0];
+ } __packed;
+ struct wil6210_rtap_vendor *rtap_vendor;
+ int rtap_len = sizeof(struct wil6210_rtap);
+ int phy_length = 0; /* phy info header size, bytes */
+ static char phy_data[128];
+ struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+
+ if (rtap_include_phy_info) {
+ rtap_len = sizeof(*rtap_vendor) + sizeof(*d);
+ /* calculate additional length */
+ if (d->dma.status & RX_DMA_STATUS_PHY_INFO) {
+ /**
+ * PHY info starts from 8-byte boundary
+ * there are 8-byte lines, last line may be partially
+ * written (HW bug), thus FW configures for last line
+ * to be excessive. Driver skips this last line.
+ */
+ int len = min_t(int, 8 + sizeof(phy_data),
+ wil_rxdesc_phy_length(d));
+ if (len > 8) {
+ void *p = skb_tail_pointer(skb);
+ void *pa = PTR_ALIGN(p, 8);
+ if (skb_tailroom(skb) >= len + (pa - p)) {
+ phy_length = len - 8;
+ memcpy(phy_data, pa, phy_length);
+ }
+ }
+ }
+ rtap_len += phy_length;
+ }
+
+ if (skb_headroom(skb) < rtap_len &&
+ pskb_expand_head(skb, rtap_len, 0, GFP_ATOMIC)) {
+ wil_err(wil, "Unable to expand headrom to %d\n", rtap_len);
+ return;
+ }
+
+ rtap_vendor = (void *)skb_push(skb, rtap_len);
+ memset(rtap_vendor, 0, rtap_len);
+
+ rtap_vendor->rtap.rthdr.it_version = PKTHDR_RADIOTAP_VERSION;
+ rtap_vendor->rtap.rthdr.it_len = cpu_to_le16(rtap_len);
+ rtap_vendor->rtap.rthdr.it_present = cpu_to_le32(
+ (1 << IEEE80211_RADIOTAP_FLAGS) |
+ (1 << IEEE80211_RADIOTAP_CHANNEL) |
+ (1 << IEEE80211_RADIOTAP_MCS));
+ if (d->dma.status & RX_DMA_STATUS_ERROR)
+ rtap_vendor->rtap.flags |= IEEE80211_RADIOTAP_F_BADFCS;
+
+ rtap_vendor->rtap.chnl_freq = cpu_to_le16(ch ? ch->center_freq : 58320);
+ rtap_vendor->rtap.chnl_flags = cpu_to_le16(0);
+
+ rtap_vendor->rtap.mcs_present = IEEE80211_RADIOTAP_MCS_HAVE_MCS;
+ rtap_vendor->rtap.mcs_flags = 0;
+ rtap_vendor->rtap.mcs_index = wil_rxdesc_mcs(d);
+
+ if (rtap_include_phy_info) {
+ rtap_vendor->rtap.rthdr.it_present |= cpu_to_le32(1 <<
+ IEEE80211_RADIOTAP_VENDOR_NAMESPACE);
+ /* OUI for Wilocity 04:ce:14 */
+ rtap_vendor->vendor_oui[0] = 0x04;
+ rtap_vendor->vendor_oui[1] = 0xce;
+ rtap_vendor->vendor_oui[2] = 0x14;
+ rtap_vendor->vendor_ns = 1;
+ /* Rx descriptor + PHY data */
+ rtap_vendor->vendor_skip = cpu_to_le16(sizeof(*d) +
+ phy_length);
+ memcpy(rtap_vendor->vendor_data, (void *)d, sizeof(*d));
+ memcpy(rtap_vendor->vendor_data + sizeof(*d), phy_data,
+ phy_length);
+ }
+}
+
+/*
+ * Fast swap in place between 2 registers
+ */
+static void wil_swap_u16(u16 *a, u16 *b)
+{
+ *a ^= *b;
+ *b ^= *a;
+ *a ^= *b;
+}
+
+static void wil_swap_ethaddr(void *data)
+{
+ struct ethhdr *eth = data;
+ u16 *s = (u16 *)eth->h_source;
+ u16 *d = (u16 *)eth->h_dest;
+
+ wil_swap_u16(s++, d++);
+ wil_swap_u16(s++, d++);
+ wil_swap_u16(s, d);
+}
+
+/**
+ * reap 1 frame from @swhead
+ *
+ * Safe to call from IRQ
+ */
+static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
+ struct vring *vring)
+{
+ struct device *dev = wil_to_dev(wil);
+ struct net_device *ndev = wil_to_ndev(wil);
+ volatile struct vring_rx_desc *d;
+ struct sk_buff *skb;
+ dma_addr_t pa;
+ unsigned int sz = RX_BUF_LEN;
+ u8 ftype;
+ u8 ds_bits;
+
+ if (wil_vring_is_empty(vring))
+ return NULL;
+
+ d = &(vring->va[vring->swhead].rx);
+ if (!(d->dma.status & RX_DMA_STATUS_DU)) {
+ /* it is not error, we just reached end of Rx done area */
+ return NULL;
+ }
+
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ skb = vring->ctx[vring->swhead];
+ dma_unmap_single(dev, pa, sz, DMA_FROM_DEVICE);
+ skb_trim(skb, d->dma.length);
+
+ wil->stats.last_mcs_rx = wil_rxdesc_mcs(d);
+
+ /* use radiotap header only if required */
+ if (ndev->type == ARPHRD_IEEE80211_RADIOTAP)
+ wil_rx_add_radiotap_header(wil, skb, d);
+
+ wil_dbg_TXRX(wil, "Rx[%3d] : %d bytes\n", vring->swhead, d->dma.length);
+ wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ wil_vring_advance_head(vring, 1);
+
+ /* no extra checks if in sniffer mode */
+ if (ndev->type != ARPHRD_ETHER)
+ return skb;
+ /*
+ * Non-data frames may be delivered through Rx DMA channel (ex: BAR)
+ * Driver should recognize it by frame type, that is found
+ * in Rx descriptor. If type is not data, it is 802.11 frame as is
+ */
+ ftype = wil_rxdesc_ftype(d) << 2;
+ if (ftype != IEEE80211_FTYPE_DATA) {
+ wil_dbg_TXRX(wil, "Non-data frame ftype 0x%08x\n", ftype);
+ /* TODO: process it */
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ if (skb->len < ETH_HLEN) {
+ wil_err(wil, "Short frame, len = %d\n", skb->len);
+ /* TODO: process it (i.e. BAR) */
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ ds_bits = wil_rxdesc_ds_bits(d);
+ if (ds_bits == 1) {
+ /*
+ * HW bug - in ToDS mode, i.e. Rx on AP side,
+ * addresses get swapped
+ */
+ wil_swap_ethaddr(skb->data);
+ }
+
+ return skb;
+}
+
+/**
+ * allocate and fill up to @count buffers in rx ring
+ * buffers posted at @swtail
+ */
+static int wil_rx_refill(struct wil6210_priv *wil, int count)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct vring *v = &wil->vring_rx;
+ u32 next_tail;
+ int rc = 0;
+ int headroom = ndev->type == ARPHRD_IEEE80211_RADIOTAP ?
+ WIL6210_RTAP_SIZE : 0;
+
+ for (; next_tail = wil_vring_next_tail(v),
+ (next_tail != v->swhead) && (count-- > 0);
+ v->swtail = next_tail) {
+ rc = wil_vring_alloc_skb(wil, v, v->swtail, headroom);
+ if (rc) {
+ wil_err(wil, "Error %d in wil_rx_refill[%d]\n",
+ rc, v->swtail);
+ break;
+ }
+ }
+ iowrite32(v->swtail, wil->csr + HOSTADDR(v->hwtail));
+
+ return rc;
+}
+
+/*
+ * Pass Rx packet to the netif. Update statistics.
+ */
+static void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
+{
+ int rc;
+ unsigned int len = skb->len;
+
+ if (in_interrupt())
+ rc = netif_rx(skb);
+ else
+ rc = netif_rx_ni(skb);
+
+ if (likely(rc == NET_RX_SUCCESS)) {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+
+ } else {
+ ndev->stats.rx_dropped++;
+ }
+}
+
+/**
+ * Proceed all completed skb's from Rx VRING
+ *
+ * Safe to call from IRQ
+ */
+void wil_rx_handle(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct vring *v = &wil->vring_rx;
+ struct sk_buff *skb;
+
+ if (!v->va) {
+ wil_err(wil, "Rx IRQ while Rx not yet initialized\n");
+ return;
+ }
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+ while (NULL != (skb = wil_vring_reap_rx(wil, v))) {
+ wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, skb_headlen(skb), false);
+
+ skb_orphan(skb);
+
+ if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ skb->dev = ndev;
+ skb_reset_mac_header(skb);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = htons(ETH_P_802_2);
+
+ } else {
+ skb->protocol = eth_type_trans(skb, ndev);
+ }
+
+ wil_netif_rx_any(skb, ndev);
+ }
+ wil_rx_refill(wil, v->size);
+}
+
+int wil_rx_init(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct vring *vring = &wil->vring_rx;
+ int rc;
+ struct wmi_cfg_rx_chain_cmd cmd = {
+ .action = WMI_RX_CHAIN_ADD,
+ .rx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(RX_BUF_LEN),
+ },
+ .mid = 0, /* TODO - what is it? */
+ .decap_trans_type = WMI_DECAP_TYPE_802_3,
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_cfg_rx_chain_done_event evt;
+ } __packed evt;
+
+ vring->size = WIL6210_RX_RING_SIZE;
+ rc = wil_vring_alloc(wil, vring);
+ if (rc)
+ return rc;
+
+ cmd.rx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
+ cmd.rx_sw_ring.ring_size = cpu_to_le16(vring->size);
+ if (wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+
+ cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON);
+ if (ch)
+ cmd.sniffer_cfg.channel = ch->hw_value - 1;
+ cmd.sniffer_cfg.phy_info_mode =
+ cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP);
+ cmd.sniffer_cfg.phy_support =
+ cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL)
+ ? WMI_SNIFFER_CP : WMI_SNIFFER_DP);
+ }
+ /* typical time for secure PCP is 840ms */
+ rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
+ WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000);
+ if (rc)
+ goto err_free;
+
+ vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr);
+
+ wil_dbg(wil, "Rx init: status %d tail 0x%08x\n",
+ le32_to_cpu(evt.evt.status), vring->hwtail);
+
+ rc = wil_rx_refill(wil, vring->size);
+ if (rc)
+ goto err_free;
+
+ return 0;
+ err_free:
+ wil_vring_free(wil, vring, 0);
+
+ return rc;
+}
+
+void wil_rx_fini(struct wil6210_priv *wil)
+{
+ struct vring *vring = &wil->vring_rx;
+
+ if (vring->va) {
+ int rc;
+ struct wmi_cfg_rx_chain_cmd cmd = {
+ .action = cpu_to_le32(WMI_RX_CHAIN_DEL),
+ .rx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(RX_BUF_LEN),
+ },
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_cfg_rx_chain_done_event cfg;
+ } __packed wmi_rx_cfg_reply;
+
+ rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
+ WMI_CFG_RX_CHAIN_DONE_EVENTID,
+ &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply),
+ 100);
+ wil_vring_free(wil, vring, 0);
+ }
+}
+
+int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
+ int cid, int tid)
+{
+ int rc;
+ struct wmi_vring_cfg_cmd cmd = {
+ .action = cpu_to_le32(WMI_VRING_CMD_ADD),
+ .vring_cfg = {
+ .tx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(TX_BUF_LEN),
+ },
+ .ringid = id,
+ .cidxtid = (cid & 0xf) | ((tid & 0xf) << 4),
+ .encap_trans_type = WMI_VRING_ENC_TYPE_802_3,
+ .mac_ctrl = 0,
+ .to_resolution = 0,
+ .agg_max_wsize = 16,
+ .schd_params = {
+ .priority = cpu_to_le16(0),
+ .timeslot_us = cpu_to_le16(0xfff),
+ },
+ },
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_vring_cfg_done_event cmd;
+ } __packed reply;
+ struct vring *vring = &wil->vring_tx[id];
+
+ if (vring->va) {
+ wil_err(wil, "Tx ring [%d] already allocated\n", id);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ vring->size = size;
+ rc = wil_vring_alloc(wil, vring);
+ if (rc)
+ goto out;
+
+ cmd.vring_cfg.tx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
+ cmd.vring_cfg.tx_sw_ring.ring_size = cpu_to_le16(vring->size);
+
+ rc = wmi_call(wil, WMI_VRING_CFG_CMDID, &cmd, sizeof(cmd),
+ WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100);
+ if (rc)
+ goto out_free;
+
+ if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) {
+ wil_err(wil, "Tx config failed, status 0x%02x\n",
+ reply.cmd.status);
+ goto out_free;
+ }
+ vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
+
+ return 0;
+ out_free:
+ wil_vring_free(wil, vring, 1);
+ out:
+
+ return rc;
+}
+
+void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
+{
+ struct vring *vring = &wil->vring_tx[id];
+
+ if (!vring->va)
+ return;
+
+ wil_vring_free(wil, vring, 1);
+}
+
+static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
+ struct sk_buff *skb)
+{
+ struct vring *v = &wil->vring_tx[0];
+
+ if (v->va)
+ return v;
+
+ return NULL;
+}
+
+static int wil_tx_desc_map(volatile struct vring_tx_desc *d,
+ dma_addr_t pa, u32 len)
+{
+ d->dma.addr_low = lower_32_bits(pa);
+ d->dma.addr_high = (u16)upper_32_bits(pa);
+ d->dma.ip_length = 0;
+ /* 0..6: mac_length; 7:ip_version 0-IP6 1-IP4*/
+ d->dma.b11 = 0/*14 | BIT(7)*/;
+ d->dma.error = 0;
+ d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
+ d->dma.length = len;
+ d->dma.d0 = 0;
+ d->mac.d[0] = 0;
+ d->mac.d[1] = 0;
+ d->mac.d[2] = 0;
+ d->mac.ucode_cmd = 0;
+ /* use dst index 0 */
+ d->mac.d[1] |= BIT(MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS) |
+ (0 << MAC_CFG_DESC_TX_1_DST_INDEX_POS);
+ /* translation type: 0 - bypass; 1 - 802.3; 2 - native wifi */
+ d->mac.d[2] = BIT(MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS) |
+ (1 << MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS);
+
+ return 0;
+}
+
+static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
+ struct sk_buff *skb)
+{
+ struct device *dev = wil_to_dev(wil);
+ volatile struct vring_tx_desc *d;
+ u32 swhead = vring->swhead;
+ int avail = wil_vring_avail_tx(vring);
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ uint f;
+ int vring_index = vring - wil->vring_tx;
+ uint i = swhead;
+ dma_addr_t pa;
+
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+
+ if (avail < vring->size/8)
+ netif_tx_stop_all_queues(wil_to_ndev(wil));
+ if (avail < 1 + nr_frags) {
+ wil_err(wil, "Tx ring full. No space for %d fragments\n",
+ 1 + nr_frags);
+ return -ENOMEM;
+ }
+ d = &(vring->va[i].tx);
+
+ /* FIXME FW can accept only unicast frames for the peer */
+ memcpy(skb->data, wil->dst_addr[vring_index], ETH_ALEN);
+
+ pa = dma_map_single(dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+
+ wil_dbg_TXRX(wil, "Tx skb %d bytes %p -> %#08llx\n", skb_headlen(skb),
+ skb->data, (unsigned long long)pa);
+ wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, skb_headlen(skb), false);
+
+ if (unlikely(dma_mapping_error(dev, pa)))
+ return -EINVAL;
+ /* 1-st segment */
+ wil_tx_desc_map(d, pa, skb_headlen(skb));
+ d->mac.d[2] |= ((nr_frags + 1) <<
+ MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
+ /* middle segments */
+ for (f = 0; f < nr_frags; f++) {
+ const struct skb_frag_struct *frag =
+ &skb_shinfo(skb)->frags[f];
+ int len = skb_frag_size(frag);
+ i = (swhead + f + 1) % vring->size;
+ d = &(vring->va[i].tx);
+ pa = skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag),
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(dev, pa)))
+ goto dma_error;
+ wil_tx_desc_map(d, pa, len);
+ vring->ctx[i] = NULL;
+ }
+ /* for the last seg only */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_EOP_POS);
+ d->dma.d0 |= BIT(9); /* BUG: undocumented bit */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS);
+ d->dma.d0 |= (vring_index << DMA_CFG_DESC_TX_0_QID_POS);
+
+ wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ /* advance swhead */
+ wil_vring_advance_head(vring, nr_frags + 1);
+ wil_dbg_TXRX(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead);
+ iowrite32(vring->swhead, wil->csr + HOSTADDR(vring->hwtail));
+ /* hold reference to skb
+ * to prevent skb release before accounting
+ * in case of immediate "tx done"
+ */
+ vring->ctx[i] = skb_get(skb);
+
+ return 0;
+ dma_error:
+ /* unmap what we have mapped */
+ /* Note: increment @f to operate with positive index */
+ for (f++; f > 0; f--) {
+ i = (swhead + f) % vring->size;
+ d = &(vring->va[i].tx);
+ d->dma.status = TX_DMA_STATUS_DU;
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ if (vring->ctx[i])
+ dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ }
+
+ return -EINVAL;
+}
+
+
+netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ struct vring *vring;
+ int rc;
+
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+ if (!test_bit(wil_status_fwready, &wil->status)) {
+ wil_err(wil, "FW not ready\n");
+ goto drop;
+ }
+ if (!test_bit(wil_status_fwconnected, &wil->status)) {
+ wil_err(wil, "FW not connected\n");
+ goto drop;
+ }
+ if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ wil_err(wil, "Xmit in monitor mode not supported\n");
+ goto drop;
+ }
+ if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
+ rc = wmi_tx_eapol(wil, skb);
+ } else {
+ /* find vring */
+ vring = wil_find_tx_vring(wil, skb);
+ if (!vring) {
+ wil_err(wil, "No Tx VRING available\n");
+ goto drop;
+ }
+ /* set up vring entry */
+ rc = wil_tx_vring(wil, vring, skb);
+ }
+ switch (rc) {
+ case 0:
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ case -ENOMEM:
+ return NETDEV_TX_BUSY;
+ default:
+ ; /* goto drop; */
+ break;
+ }
+ drop:
+ netif_tx_stop_all_queues(ndev);
+ ndev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+
+ return NET_XMIT_DROP;
+}
+
+/**
+ * Clean up transmitted skb's from the Tx VRING
+ *
+ * Safe to call from IRQ
+ */
+void wil_tx_complete(struct wil6210_priv *wil, int ringid)
+{
+ struct device *dev = wil_to_dev(wil);
+ struct vring *vring = &wil->vring_tx[ringid];
+
+ if (!vring->va) {
+ wil_err(wil, "Tx irq[%d]: vring not initialized\n", ringid);
+ return;
+ }
+
+ wil_dbg_TXRX(wil, "%s(%d)\n", __func__, ringid);
+
+ while (!wil_vring_is_empty(vring)) {
+ volatile struct vring_tx_desc *d = &vring->va[vring->swtail].tx;
+ dma_addr_t pa;
+ struct sk_buff *skb;
+ if (!(d->dma.status & TX_DMA_STATUS_DU))
+ break;
+
+ wil_dbg_TXRX(wil,
+ "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n",
+ vring->swtail, d->dma.length, d->dma.status,
+ d->dma.error);
+ wil_hex_dump_TXRX("TxC ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ skb = vring->ctx[vring->swtail];
+ if (skb) {
+ dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ vring->ctx[vring->swtail] = NULL;
+ } else {
+ dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ }
+ d->dma.addr_low = 0;
+ d->dma.addr_high = 0;
+ d->dma.length = 0;
+ d->dma.status = TX_DMA_STATUS_DU;
+ vring->swtail = wil_vring_next_tail(vring);
+ }
+ if (wil_vring_avail_tx(vring) > vring->size/4)
+ netif_tx_wake_all_queues(wil_to_ndev(wil));
+}
diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h
new file mode 100644
index 0000000..45a61f5
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/txrx.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WIL6210_TXRX_H
+#define WIL6210_TXRX_H
+
+#define BUF_SW_OWNED (1)
+#define BUF_HW_OWNED (0)
+
+/* size of max. Rx packet */
+#define RX_BUF_LEN (2048)
+#define TX_BUF_LEN (2048)
+/* how many bytes to reserve for rtap header? */
+#define WIL6210_RTAP_SIZE (128)
+
+/* Tx/Rx path */
+/*
+ * Tx descriptor - MAC part
+ * [dword 0]
+ * bit 0.. 9 : lifetime_expiry_value:10
+ * bit 10 : interrup_en:1
+ * bit 11 : status_en:1
+ * bit 12..13 : txss_override:2
+ * bit 14 : timestamp_insertion:1
+ * bit 15 : duration_preserve:1
+ * bit 16..21 : reserved0:6
+ * bit 22..26 : mcs_index:5
+ * bit 27 : mcs_en:1
+ * bit 28..29 : reserved1:2
+ * bit 30 : reserved2:1
+ * bit 31 : sn_preserved:1
+ * [dword 1]
+ * bit 0.. 3 : pkt_mode:4
+ * bit 4 : pkt_mode_en:1
+ * bit 5.. 7 : reserved0:3
+ * bit 8..13 : reserved1:6
+ * bit 14 : reserved2:1
+ * bit 15 : ack_policy_en:1
+ * bit 16..19 : dst_index:4
+ * bit 20 : dst_index_en:1
+ * bit 21..22 : ack_policy:2
+ * bit 23 : lifetime_en:1
+ * bit 24..30 : max_retry:7
+ * bit 31 : max_retry_en:1
+ * [dword 2]
+ * bit 0.. 7 : num_of_descriptors:8
+ * bit 8..17 : reserved:10
+ * bit 18..19 : l2_translation_type:2
+ * bit 20 : snap_hdr_insertion_en:1
+ * bit 21 : vlan_removal_en:1
+ * bit 22..31 : reserved0:10
+ * [dword 3]
+ * bit 0.. 31: ucode_cmd:32
+ */
+struct vring_tx_mac {
+ u32 d[3];
+ u32 ucode_cmd;
+} __packed;
+
+/* TX MAC Dword 0 */
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_POS 0
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_LEN 10
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_MSK 0x3FF
+
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_POS 10
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_MSK 0x400
+
+#define MAC_CFG_DESC_TX_0_STATUS_EN_POS 11
+#define MAC_CFG_DESC_TX_0_STATUS_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_STATUS_EN_MSK 0x800
+
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_POS 12
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_LEN 2
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_MSK 0x3000
+
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_POS 14
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_LEN 1
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_MSK 0x4000
+
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_POS 15
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_LEN 1
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_MSK 0x8000
+
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_POS 22
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_LEN 5
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_MSK 0x7C00000
+
+#define MAC_CFG_DESC_TX_0_MCS_EN_POS 27
+#define MAC_CFG_DESC_TX_0_MCS_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_MCS_EN_MSK 0x8000000
+
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_POS 31
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_LEN 1
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_MSK 0x80000000
+
+/* TX MAC Dword 1 */
+#define MAC_CFG_DESC_TX_1_PKT_MODE_POS 0
+#define MAC_CFG_DESC_TX_1_PKT_MODE_LEN 4
+#define MAC_CFG_DESC_TX_1_PKT_MODE_MSK 0xF
+
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_POS 4
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_MSK 0x10
+
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_POS 15
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_MSK 0x8000
+
+#define MAC_CFG_DESC_TX_1_DST_INDEX_POS 16
+#define MAC_CFG_DESC_TX_1_DST_INDEX_LEN 4
+#define MAC_CFG_DESC_TX_1_DST_INDEX_MSK 0xF0000
+
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS 20
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_MSK 0x100000
+
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_POS 21
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_LEN 2
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_MSK 0x600000
+
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_POS 23
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_MSK 0x800000
+
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_POS 24
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_LEN 7
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_MSK 0x7F000000
+
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_POS 31
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_MSK 0x80000000
+
+/* TX MAC Dword 2 */
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS 0
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_LEN 8
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_MSK 0xFF
+
+#define MAC_CFG_DESC_TX_2_RESERVED_POS 8
+#define MAC_CFG_DESC_TX_2_RESERVED_LEN 10
+#define MAC_CFG_DESC_TX_2_RESERVED_MSK 0x3FF00
+
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS 18
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_LEN 2
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_MSK 0xC0000
+
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS 20
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_LEN 1
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_MSK 0x100000
+
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_POS 21
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_LEN 1
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_MSK 0x200000
+
+/* TX MAC Dword 3 */
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_POS 0
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_LEN 32
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_MSK 0xFFFFFFFF
+
+/* TX DMA Dword 0 */
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_POS 0
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_LEN 8
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_MSK 0xFF
+
+#define DMA_CFG_DESC_TX_0_CMD_EOP_POS 8
+#define DMA_CFG_DESC_TX_0_CMD_EOP_LEN 1
+#define DMA_CFG_DESC_TX_0_CMD_EOP_MSK 0x100
+
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS 10
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_LEN 1
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_MSK 0x400
+
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_POS 11
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_LEN 2
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_MSK 0x1800
+
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_POS 13
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_MSK 0x2000
+
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_POS 14
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_MSK 0x4000
+
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_POS 15
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_MSK 0x8000
+
+#define DMA_CFG_DESC_TX_0_QID_POS 16
+#define DMA_CFG_DESC_TX_0_QID_LEN 5
+#define DMA_CFG_DESC_TX_0_QID_MSK 0x1F0000
+
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_POS 21
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_MSK 0x200000
+
+#define DMA_CFG_DESC_TX_0_L4_TYPE_POS 30
+#define DMA_CFG_DESC_TX_0_L4_TYPE_LEN 2
+#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000
+
+
+#define TX_DMA_STATUS_DU BIT(0)
+
+struct vring_tx_dma {
+ u32 d0;
+ u32 addr_low;
+ u16 addr_high;
+ u8 ip_length;
+ u8 b11; /* 0..6: mac_length; 7:ip_version */
+ u8 error; /* 0..2: err; 3..7: reserved; */
+ u8 status; /* 0: used; 1..7; reserved */
+ u16 length;
+} __packed;
+
+/*
+ * Rx descriptor - MAC part
+ * [dword 0]
+ * bit 0.. 3 : tid:4 The QoS (b3-0) TID Field
+ * bit 4.. 6 : connection_id:3 :The Source index that was found during
+ * Parsing the TA. This field is used to define the source of the packet
+ * bit 7 : reserved:1
+ * bit 8.. 9 : mac_id:2 : The MAC virtual Ring number (always zero)
+ * bit 10..11 : frame_type:2 : The FC Control (b3-2) - MPDU Type
+ * (management, data, control and extension)
+ * bit 12..15 : frame_subtype:4 : The FC Control (b7-4) - Frame Subtype
+ * bit 16..27 : seq_number:12 The received Sequence number field
+ * bit 28..31 : extended:4 extended subtype
+ * [dword 1]
+ * bit 0.. 3 : reserved
+ * bit 4.. 5 : key_id:2
+ * bit 6 : decrypt_bypass:1
+ * bit 7 : security:1
+ * bit 8.. 9 : ds_bits:2
+ * bit 10 : a_msdu_present:1 from qos header
+ * bit 11 : a_msdu_type:1 from qos header
+ * bit 12 : a_mpdu:1 part of AMPDU aggregation
+ * bit 13 : broadcast:1
+ * bit 14 : mutlicast:1
+ * bit 15 : reserved:1
+ * bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet
+ * is received from
+ * bit 21..24 : mcs:4
+ * bit 25..28 : mic_icr:4
+ * bit 29..31 : reserved:3
+ * [dword 2]
+ * bit 0.. 2 : time_slot:3 The timeslot that the MPDU is received
+ * bit 3 : fc_protocol_ver:1 The FC Control (b0) - Protocol Version
+ * bit 4 : fc_order:1 The FC Control (b15) -Order
+ * bit 5.. 7 : qos_ack_policy:3 The QoS (b6-5) ack policy Field
+ * bit 8 : esop:1 The QoS (b4) ESOP field
+ * bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field
+ * bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field
+ * bit 15 : qos_ac_constraint:1
+ * bit 16..31 : pn_15_0:16 low 2 bytes of PN
+ * [dword 3]
+ * bit 0..31 : pn_47_16:32 high 4 bytes of PN
+ */
+struct vring_rx_mac {
+ u32 d0;
+ u32 d1;
+ u16 w4;
+ u16 pn_15_0;
+ u32 pn_47_16;
+} __packed;
+
+/*
+ * Rx descriptor - DMA part
+ * [dword 0]
+ * bit 0.. 7 : l4_length:8 layer 4 length
+ * bit 8.. 9 : reserved:2
+ * bit 10 : cmd_dma_it:1
+ * bit 11..15 : reserved:5
+ * bit 16..29 : phy_info_length:14
+ * bit 30..31 : l4_type:2 valid if the L4I bit is set in the status field
+ * [dword 1]
+ * bit 0..31 : addr_low:32 The payload buffer low address
+ * [dword 2]
+ * bit 0..15 : addr_high:16 The payload buffer high address
+ * bit 16..23 : ip_length:8
+ * bit 24..30 : mac_length:7
+ * bit 31 : ip_version:1
+ * [dword 3]
+ * [byte 12] error
+ * [byte 13] status
+ * bit 0 : du:1
+ * bit 1 : eop:1
+ * bit 2 : error:1
+ * bit 3 : mi:1
+ * bit 4 : l3_identified:1
+ * bit 5 : l4_identified:1
+ * bit 6 : phy_info_included:1
+ * bit 7 : reserved:1
+ * [word 7] length
+ *
+ */
+
+#define RX_DMA_D0_CMD_DMA_IT BIT(10)
+
+#define RX_DMA_STATUS_DU BIT(0)
+#define RX_DMA_STATUS_ERROR BIT(2)
+#define RX_DMA_STATUS_PHY_INFO BIT(6)
+
+struct vring_rx_dma {
+ u32 d0;
+ u32 addr_low;
+ u16 addr_high;
+ u8 ip_length;
+ u8 b11;
+ u8 error;
+ u8 status;
+ u16 length;
+} __packed;
+
+struct vring_tx_desc {
+ struct vring_tx_mac mac;
+ struct vring_tx_dma dma;
+} __packed;
+
+struct vring_rx_desc {
+ struct vring_rx_mac mac;
+ struct vring_rx_dma dma;
+} __packed;
+
+union vring_desc {
+ struct vring_tx_desc tx;
+ struct vring_rx_desc rx;
+} __packed;
+
+static inline int wil_rxdesc_phy_length(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->dma.d0, 16, 29);
+}
+
+static inline int wil_rxdesc_mcs(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d1, 21, 24);
+}
+
+static inline int wil_rxdesc_ds_bits(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d1, 8, 9);
+}
+
+static inline int wil_rxdesc_ftype(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d0, 10, 11);
+}
+
+#endif /* WIL6210_TXRX_H */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
new file mode 100644
index 0000000..ef5a17f
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -0,0 +1,361 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __WIL6210_H__
+#define __WIL6210_H__
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/cfg80211.h>
+
+#define WIL_NAME "wil6210"
+
+/**
+ * extract bits [@b0:@b1] (inclusive) from the value @x
+ * it should be @b0 <= @b1, or result is incorrect
+ */
+static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
+{
+ return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1);
+}
+
+#define WIL6210_MEM_SIZE (2*1024*1024UL)
+
+#define WIL6210_TX_QUEUES (4)
+
+#define WIL6210_RX_RING_SIZE (128)
+#define WIL6210_TX_RING_SIZE (128)
+#define WIL6210_MAX_TX_RINGS (24)
+
+/* Hardware definitions begin */
+
+/*
+ * Mapping
+ * RGF File | Host addr | FW addr
+ * | |
+ * user_rgf | 0x000000 | 0x880000
+ * dma_rgf | 0x001000 | 0x881000
+ * pcie_rgf | 0x002000 | 0x882000
+ * | |
+ */
+
+/* Where various structures placed in host address space */
+#define WIL6210_FW_HOST_OFF (0x880000UL)
+
+#define HOSTADDR(fwaddr) (fwaddr - WIL6210_FW_HOST_OFF)
+
+/*
+ * Interrupt control registers block
+ *
+ * each interrupt controlled by the same bit in all registers
+ */
+struct RGF_ICR {
+ u32 ICC; /* Cause Control, RW: 0 - W1C, 1 - COR */
+ u32 ICR; /* Cause, W1C/COR depending on ICC */
+ u32 ICM; /* Cause masked (ICR & ~IMV), W1C/COR depending on ICC */
+ u32 ICS; /* Cause Set, WO */
+ u32 IMV; /* Mask, RW+S/C */
+ u32 IMS; /* Mask Set, write 1 to set */
+ u32 IMC; /* Mask Clear, write 1 to clear */
+} __packed;
+
+/* registers - FW addresses */
+#define RGF_USER_USER_SCRATCH_PAD (0x8802bc)
+#define RGF_USER_USER_ICR (0x880b4c) /* struct RGF_ICR */
+ #define BIT_USER_USER_ICR_SW_INT_2 BIT(18)
+#define RGF_USER_CLKS_CTL_SW_RST_MASK_0 (0x880b14)
+#define RGF_USER_MAC_CPU_0 (0x8801fc)
+#define RGF_USER_USER_CPU_0 (0x8801e0)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_0 (0x880b04)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_1 (0x880b08)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_2 (0x880b0c)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_3 (0x880b10)
+
+#define RGF_DMA_PSEUDO_CAUSE (0x881c68)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_SW (0x881c6c)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_FW (0x881c70)
+ #define BIT_DMA_PSEUDO_CAUSE_RX BIT(0)
+ #define BIT_DMA_PSEUDO_CAUSE_TX BIT(1)
+ #define BIT_DMA_PSEUDO_CAUSE_MISC BIT(2)
+
+#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */
+ #define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0)
+ #define BIT_DMA_EP_TX_ICR_TX_DONE_N(n) BIT(n+1) /* n = [0..23] */
+#define RGF_DMA_EP_RX_ICR (0x881bd0) /* struct RGF_ICR */
+ #define BIT_DMA_EP_RX_ICR_RX_DONE BIT(0)
+#define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */
+ #define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0)
+ #define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1)
+ #define BIT_DMA_EP_MISC_ICR_FW_INT0 BIT(28)
+ #define BIT_DMA_EP_MISC_ICR_FW_INT1 BIT(29)
+
+/* Interrupt moderation control */
+#define RGF_DMA_ITR_CNT_TRSH (0x881c5c)
+#define RGF_DMA_ITR_CNT_DATA (0x881c60)
+#define RGF_DMA_ITR_CNT_CRL (0x881C64)
+ #define BIT_DMA_ITR_CNT_CRL_EN BIT(0)
+ #define BIT_DMA_ITR_CNT_CRL_EXT_TICK BIT(1)
+ #define BIT_DMA_ITR_CNT_CRL_FOREVER BIT(2)
+ #define BIT_DMA_ITR_CNT_CRL_CLR BIT(3)
+ #define BIT_DMA_ITR_CNT_CRL_REACH_TRSH BIT(4)
+
+/* popular locations */
+#define HOST_MBOX HOSTADDR(RGF_USER_USER_SCRATCH_PAD)
+#define HOST_SW_INT (HOSTADDR(RGF_USER_USER_ICR) + \
+ offsetof(struct RGF_ICR, ICS))
+#define SW_INT_MBOX BIT_USER_USER_ICR_SW_INT_2
+
+/* ISR register bits */
+#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT0
+#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT1
+
+/* Hardware definitions end */
+
+struct wil6210_mbox_ring {
+ u32 base;
+ u16 entry_size; /* max. size of mbox entry, incl. all headers */
+ u16 size;
+ u32 tail;
+ u32 head;
+} __packed;
+
+struct wil6210_mbox_ring_desc {
+ __le32 sync;
+ __le32 addr;
+} __packed;
+
+/* at HOST_OFF_WIL6210_MBOX_CTL */
+struct wil6210_mbox_ctl {
+ struct wil6210_mbox_ring tx;
+ struct wil6210_mbox_ring rx;
+} __packed;
+
+struct wil6210_mbox_hdr {
+ __le16 seq;
+ __le16 len; /* payload, bytes after this header */
+ __le16 type;
+ u8 flags;
+ u8 reserved;
+} __packed;
+
+#define WIL_MBOX_HDR_TYPE_WMI (0)
+
+/* max. value for wil6210_mbox_hdr.len */
+#define MAX_MBOXITEM_SIZE (240)
+
+struct wil6210_mbox_hdr_wmi {
+ u8 reserved0[2];
+ __le16 id;
+ __le16 info1; /* bits [0..3] - device_id, rest - unused */
+ u8 reserved1[2];
+} __packed;
+
+struct pending_wmi_event {
+ struct list_head list;
+ struct {
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_hdr_wmi wmi;
+ u8 data[0];
+ } __packed event;
+};
+
+union vring_desc;
+
+struct vring {
+ dma_addr_t pa;
+ volatile union vring_desc *va; /* vring_desc[size], WriteBack by DMA */
+ u16 size; /* number of vring_desc elements */
+ u32 swtail;
+ u32 swhead;
+ u32 hwtail; /* write here to inform hw */
+ void **ctx; /* void *ctx[size] - software context */
+};
+
+enum { /* for wil6210_priv.status */
+ wil_status_fwready = 0,
+ wil_status_fwconnected,
+ wil_status_dontscan,
+ wil_status_irqen, /* FIXME: interrupts enabled - for debug */
+};
+
+struct pci_dev;
+
+struct wil6210_stats {
+ u64 tsf;
+ u32 snr;
+ u16 last_mcs_rx;
+ u16 bf_mcs; /* last BF, used for Tx */
+ u16 my_rx_sector;
+ u16 my_tx_sector;
+ u16 peer_rx_sector;
+ u16 peer_tx_sector;
+};
+
+struct wil6210_priv {
+ struct pci_dev *pdev;
+ int n_msi;
+ struct wireless_dev *wdev;
+ void __iomem *csr;
+ ulong status;
+ /* profile */
+ u32 monitor_flags;
+ u32 secure_pcp; /* create secure PCP? */
+ int sinfo_gen;
+ /* cached ISR registers */
+ u32 isr_misc;
+ /* mailbox related */
+ struct mutex wmi_mutex;
+ struct wil6210_mbox_ctl mbox_ctl;
+ struct completion wmi_ready;
+ u16 wmi_seq;
+ u16 reply_id; /**< wait for this WMI event */
+ void *reply_buf;
+ u16 reply_size;
+ struct workqueue_struct *wmi_wq; /* for deferred calls */
+ struct work_struct wmi_event_worker;
+ struct workqueue_struct *wmi_wq_conn; /* for connect worker */
+ struct work_struct wmi_connect_worker;
+ struct work_struct disconnect_worker;
+ struct timer_list connect_timer;
+ int pending_connect_cid;
+ struct list_head pending_wmi_ev;
+ /*
+ * protect pending_wmi_ev
+ * - fill in IRQ from wil6210_irq_misc,
+ * - consumed in thread by wmi_event_worker
+ */
+ spinlock_t wmi_ev_lock;
+ /* DMA related */
+ struct vring vring_rx;
+ struct vring vring_tx[WIL6210_MAX_TX_RINGS];
+ u8 dst_addr[WIL6210_MAX_TX_RINGS][ETH_ALEN];
+ /* scan */
+ struct cfg80211_scan_request *scan_request;
+
+ struct mutex mutex; /* for wil6210_priv access in wil_{up|down} */
+ /* statistics */
+ struct wil6210_stats stats;
+ /* debugfs */
+ struct dentry *debug;
+ struct debugfs_blob_wrapper fw_code_blob;
+ struct debugfs_blob_wrapper fw_data_blob;
+ struct debugfs_blob_wrapper fw_peri_blob;
+ struct debugfs_blob_wrapper uc_code_blob;
+ struct debugfs_blob_wrapper uc_data_blob;
+ struct debugfs_blob_wrapper rgf_blob;
+};
+
+#define wil_to_wiphy(i) (i->wdev->wiphy)
+#define wil_to_dev(i) (wiphy_dev(wil_to_wiphy(i)))
+#define wiphy_to_wil(w) (struct wil6210_priv *)(wiphy_priv(w))
+#define wil_to_wdev(i) (i->wdev)
+#define wdev_to_wil(w) (struct wil6210_priv *)(wdev_priv(w))
+#define wil_to_ndev(i) (wil_to_wdev(i)->netdev)
+#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr))
+
+#define wil_dbg(wil, fmt, arg...) netdev_dbg(wil_to_ndev(wil), fmt, ##arg)
+#define wil_info(wil, fmt, arg...) netdev_info(wil_to_ndev(wil), fmt, ##arg)
+#define wil_err(wil, fmt, arg...) netdev_err(wil_to_ndev(wil), fmt, ##arg)
+
+#define wil_dbg_IRQ(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg)
+#define wil_dbg_TXRX(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg)
+#define wil_dbg_WMI(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg)
+
+#define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump_debug("DBG[TXRX]" prefix_str,\
+ prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define wil_hex_dump_WMI(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump_debug("DBG[ WMI]" prefix_str, \
+ prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
+ size_t count);
+void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
+ size_t count);
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr);
+void wil_if_free(struct wil6210_priv *wil);
+int wil_if_add(struct wil6210_priv *wil);
+void wil_if_remove(struct wil6210_priv *wil);
+int wil_priv_init(struct wil6210_priv *wil);
+void wil_priv_deinit(struct wil6210_priv *wil);
+int wil_reset(struct wil6210_priv *wil);
+void wil_link_on(struct wil6210_priv *wil);
+void wil_link_off(struct wil6210_priv *wil);
+int wil_up(struct wil6210_priv *wil);
+int wil_down(struct wil6210_priv *wil);
+void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
+
+void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr);
+void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr);
+int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
+ struct wil6210_mbox_hdr *hdr);
+int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len);
+void wmi_recv_cmd(struct wil6210_priv *wil);
+int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
+ u16 reply_id, void *reply, u8 reply_size, int to_msec);
+void wmi_connect_worker(struct work_struct *work);
+void wmi_event_worker(struct work_struct *work);
+void wmi_event_flush(struct wil6210_priv *wil);
+int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid);
+int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid);
+int wmi_set_channel(struct wil6210_priv *wil, int channel);
+int wmi_get_channel(struct wil6210_priv *wil, int *channel);
+int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb);
+int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr);
+int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr, int key_len, const void *key);
+int wmi_echo(struct wil6210_priv *wil);
+int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
+
+int wil6210_init_irq(struct wil6210_priv *wil, int irq);
+void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
+void wil6210_disable_irq(struct wil6210_priv *wil);
+void wil6210_enable_irq(struct wil6210_priv *wil);
+
+int wil6210_debugfs_init(struct wil6210_priv *wil);
+void wil6210_debugfs_remove(struct wil6210_priv *wil);
+
+struct wireless_dev *wil_cfg80211_init(struct device *dev);
+void wil_wdev_free(struct wil6210_priv *wil);
+
+int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
+int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype);
+void wil6210_disconnect(struct wil6210_priv *wil, void *bssid);
+
+int wil_rx_init(struct wil6210_priv *wil);
+void wil_rx_fini(struct wil6210_priv *wil);
+
+/* TX API */
+int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
+ int cid, int tid);
+void wil_vring_fini_tx(struct wil6210_priv *wil, int id);
+
+netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+void wil_tx_complete(struct wil6210_priv *wil, int ringid);
+
+/* RX API */
+void wil_rx_handle(struct wil6210_priv *wil);
+
+int wil_iftype_nl2wmi(enum nl80211_iftype type);
+
+#endif /* __WIL6210_H__ */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
new file mode 100644
index 0000000..12915f6
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -0,0 +1,975 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/etherdevice.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+
+/**
+ * WMI event receiving - theory of operations
+ *
+ * When firmware about to report WMI event, it fills memory area
+ * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for
+ * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler.
+ *
+ * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the
+ * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up
+ * and handles events within the @wmi_event_worker. Every event get detached
+ * from list, processed and deleted.
+ *
+ * Purpose for this mechanism is to release IRQ thread; otherwise,
+ * if WMI event handling involves another WMI command flow, this 2-nd flow
+ * won't be completed because of blocked IRQ thread.
+ */
+
+/**
+ * Addressing - theory of operations
+ *
+ * There are several buses present on the WIL6210 card.
+ * Same memory areas are visible at different address on
+ * the different busses. There are 3 main bus masters:
+ * - MAC CPU (ucode)
+ * - User CPU (firmware)
+ * - AHB (host)
+ *
+ * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
+ * AHB addresses starting from 0x880000
+ *
+ * Internally, firmware uses addresses that allows faster access but
+ * are invisible from the host. To read from these addresses, alternative
+ * AHB address must be used.
+ *
+ * Memory mapping
+ * Linker address PCI/Host address
+ * 0x880000 .. 0xa80000 2Mb BAR0
+ * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM
+ * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH
+ */
+
+/**
+ * @fw_mapping provides memory remapping table
+ */
+static const struct {
+ u32 from; /* linker address - from, inclusive */
+ u32 to; /* linker address - to, exclusive */
+ u32 host; /* PCI/Host address - BAR0 + 0x880000 */
+} fw_mapping[] = {
+ {0x000000, 0x040000, 0x8c0000}, /* FW code RAM 256k */
+ {0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */
+ {0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */
+ {0x880000, 0x88a000, 0x880000}, /* various RGF */
+ {0x8c0000, 0x932000, 0x8c0000}, /* trivial mapping for upper area */
+ /*
+ * 920000..930000 ucode code RAM
+ * 930000..932000 ucode data RAM
+ */
+};
+
+/**
+ * return AHB address for given firmware/ucode internal (linker) address
+ * @x - internal address
+ * If address have no valid AHB mapping, return 0
+ */
+static u32 wmi_addr_remap(u32 x)
+{
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
+ if ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to))
+ return x + fw_mapping[i].host - fw_mapping[i].from;
+ }
+
+ return 0;
+}
+
+/**
+ * Check address validity for WMI buffer; remap if needed
+ * @ptr - internal (linker) fw/ucode address
+ *
+ * Valid buffer should be DWORD aligned
+ *
+ * return address for accessing buffer from the host;
+ * if buffer is not valid, return NULL.
+ */
+void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_)
+{
+ u32 off;
+ u32 ptr = le32_to_cpu(ptr_);
+
+ if (ptr % 4)
+ return NULL;
+
+ ptr = wmi_addr_remap(ptr);
+ if (ptr < WIL6210_FW_HOST_OFF)
+ return NULL;
+
+ off = HOSTADDR(ptr);
+ if (off > WIL6210_MEM_SIZE - 4)
+ return NULL;
+
+ return wil->csr + off;
+}
+
+/**
+ * Check address validity
+ */
+void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr)
+{
+ u32 off;
+
+ if (ptr % 4)
+ return NULL;
+
+ if (ptr < WIL6210_FW_HOST_OFF)
+ return NULL;
+
+ off = HOSTADDR(ptr);
+ if (off > WIL6210_MEM_SIZE - 4)
+ return NULL;
+
+ return wil->csr + off;
+}
+
+int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
+ struct wil6210_mbox_hdr *hdr)
+{
+ void __iomem *src = wmi_buffer(wil, ptr);
+ if (!src)
+ return -EINVAL;
+
+ wil_memcpy_fromio_32(hdr, src, sizeof(*hdr));
+
+ return 0;
+}
+
+static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
+{
+ struct {
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_hdr_wmi wmi;
+ } __packed cmd = {
+ .hdr = {
+ .type = WIL_MBOX_HDR_TYPE_WMI,
+ .flags = 0,
+ .len = cpu_to_le16(sizeof(cmd.wmi) + len),
+ },
+ .wmi = {
+ .id = cpu_to_le16(cmdid),
+ .info1 = 0,
+ },
+ };
+ struct wil6210_mbox_ring *r = &wil->mbox_ctl.tx;
+ struct wil6210_mbox_ring_desc d_head;
+ u32 next_head;
+ void __iomem *dst;
+ void __iomem *head = wmi_addr(wil, r->head);
+ uint retry;
+
+ if (sizeof(cmd) + len > r->entry_size) {
+ wil_err(wil, "WMI size too large: %d bytes, max is %d\n",
+ (int)(sizeof(cmd) + len), r->entry_size);
+ return -ERANGE;
+
+ }
+
+ might_sleep();
+
+ if (!test_bit(wil_status_fwready, &wil->status)) {
+ wil_err(wil, "FW not ready\n");
+ return -EAGAIN;
+ }
+
+ if (!head) {
+ wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head);
+ return -EINVAL;
+ }
+ /* read Tx head till it is not busy */
+ for (retry = 5; retry > 0; retry--) {
+ wil_memcpy_fromio_32(&d_head, head, sizeof(d_head));
+ if (d_head.sync == 0)
+ break;
+ msleep(20);
+ }
+ if (d_head.sync != 0) {
+ wil_err(wil, "WMI head busy\n");
+ return -EBUSY;
+ }
+ /* next head */
+ next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size);
+ wil_dbg_WMI(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head);
+ /* wait till FW finish with previous command */
+ for (retry = 5; retry > 0; retry--) {
+ r->tail = ioread32(wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx.tail));
+ if (next_head != r->tail)
+ break;
+ msleep(20);
+ }
+ if (next_head == r->tail) {
+ wil_err(wil, "WMI ring full\n");
+ return -EBUSY;
+ }
+ dst = wmi_buffer(wil, d_head.addr);
+ if (!dst) {
+ wil_err(wil, "invalid WMI buffer: 0x%08x\n",
+ le32_to_cpu(d_head.addr));
+ return -EINVAL;
+ }
+ cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq);
+ /* set command */
+ wil_dbg_WMI(wil, "WMI command 0x%04x [%d]\n", cmdid, len);
+ wil_hex_dump_WMI("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd,
+ sizeof(cmd), true);
+ wil_hex_dump_WMI("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf,
+ len, true);
+ wil_memcpy_toio_32(dst, &cmd, sizeof(cmd));
+ wil_memcpy_toio_32(dst + sizeof(cmd), buf, len);
+ /* mark entry as full */
+ iowrite32(1, wil->csr + HOSTADDR(r->head) +
+ offsetof(struct wil6210_mbox_ring_desc, sync));
+ /* advance next ptr */
+ iowrite32(r->head = next_head, wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx.head));
+
+ /* interrupt to FW */
+ iowrite32(SW_INT_MBOX, wil->csr + HOST_SW_INT);
+
+ return 0;
+}
+
+int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
+{
+ int rc;
+
+ mutex_lock(&wil->wmi_mutex);
+ rc = __wmi_send(wil, cmdid, buf, len);
+ mutex_unlock(&wil->wmi_mutex);
+
+ return rc;
+}
+
+/*=== Event handlers ===*/
+static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct wmi_ready_event *evt = d;
+ u32 ver = le32_to_cpu(evt->sw_version);
+
+ wil_dbg_WMI(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac);
+
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ memcpy(ndev->dev_addr, evt->mac, ETH_ALEN);
+ memcpy(ndev->perm_addr, evt->mac, ETH_ALEN);
+ }
+ snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version),
+ "%d", ver);
+}
+
+static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
+ int len)
+{
+ wil_dbg_WMI(wil, "WMI: FW ready\n");
+
+ set_bit(wil_status_fwready, &wil->status);
+ /* reuse wmi_ready for the firmware ready indication */
+ complete(&wil->wmi_ready);
+}
+
+static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct wmi_rx_mgmt_packet_event *data = d;
+ struct wiphy *wiphy = wil_to_wiphy(wil);
+ struct ieee80211_mgmt *rx_mgmt_frame =
+ (struct ieee80211_mgmt *)data->payload;
+ int ch_no = data->info.channel+1;
+ u32 freq = ieee80211_channel_to_frequency(ch_no,
+ IEEE80211_BAND_60GHZ);
+ struct ieee80211_channel *channel = ieee80211_get_channel(wiphy, freq);
+ /* TODO convert LE to CPU */
+ s32 signal = 0; /* TODO */
+ __le16 fc = rx_mgmt_frame->frame_control;
+ u32 d_len = le32_to_cpu(data->info.len);
+ u16 d_status = le16_to_cpu(data->info.status);
+
+ wil_dbg_WMI(wil, "MGMT: channel %d MCS %d SNR %d\n",
+ data->info.channel, data->info.mcs, data->info.snr);
+ wil_dbg_WMI(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len,
+ le16_to_cpu(data->info.stype));
+ wil_dbg_WMI(wil, "qid %d mid %d cid %d\n",
+ data->info.qid, data->info.mid, data->info.cid);
+
+ if (!channel) {
+ wil_err(wil, "Frame on unsupported channel\n");
+ return;
+ }
+
+ if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) {
+ struct cfg80211_bss *bss;
+ u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp);
+ u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info);
+ u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int);
+ const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable;
+ size_t ie_len = d_len - offsetof(struct ieee80211_mgmt,
+ u.beacon.variable);
+ wil_dbg_WMI(wil, "Capability info : 0x%04x\n", cap);
+
+ bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid,
+ tsf, cap, bi, ie_buf, ie_len,
+ signal, GFP_KERNEL);
+ if (bss) {
+ wil_dbg_WMI(wil, "Added BSS %pM\n",
+ rx_mgmt_frame->bssid);
+ cfg80211_put_bss(bss);
+ } else {
+ wil_err(wil, "cfg80211_inform_bss() failed\n");
+ }
+ }
+}
+
+static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ if (wil->scan_request) {
+ struct wmi_scan_complete_event *data = d;
+ bool aborted = (data->status != 0);
+
+ wil_dbg_WMI(wil, "SCAN_COMPLETE(0x%08x)\n", data->status);
+ cfg80211_scan_done(wil->scan_request, aborted);
+ wil->scan_request = NULL;
+ } else {
+ wil_err(wil, "SCAN_COMPLETE while not scanning\n");
+ }
+}
+
+static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct wmi_connect_event *evt = d;
+ int ch; /* channel number */
+ struct station_info sinfo;
+ u8 *assoc_req_ie, *assoc_resp_ie;
+ size_t assoc_req_ielen, assoc_resp_ielen;
+ /* capinfo(u16) + listen_interval(u16) + IEs */
+ const size_t assoc_req_ie_offset = sizeof(u16) * 2;
+ /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */
+ const size_t assoc_resp_ie_offset = sizeof(u16) * 3;
+
+ if (len < sizeof(*evt)) {
+ wil_err(wil, "Connect event too short : %d bytes\n", len);
+ return;
+ }
+ if (len != sizeof(*evt) + evt->beacon_ie_len + evt->assoc_req_len +
+ evt->assoc_resp_len) {
+ wil_err(wil,
+ "Connect event corrupted : %d != %d + %d + %d + %d\n",
+ len, (int)sizeof(*evt), evt->beacon_ie_len,
+ evt->assoc_req_len, evt->assoc_resp_len);
+ return;
+ }
+ ch = evt->channel + 1;
+ wil_dbg_WMI(wil, "Connect %pM channel [%d] cid %d\n",
+ evt->bssid, ch, evt->cid);
+ wil_hex_dump_WMI("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1,
+ evt->assoc_info, len - sizeof(*evt), true);
+
+ /* figure out IE's */
+ assoc_req_ie = &evt->assoc_info[evt->beacon_ie_len +
+ assoc_req_ie_offset];
+ assoc_req_ielen = evt->assoc_req_len - assoc_req_ie_offset;
+ if (evt->assoc_req_len <= assoc_req_ie_offset) {
+ assoc_req_ie = NULL;
+ assoc_req_ielen = 0;
+ }
+
+ assoc_resp_ie = &evt->assoc_info[evt->beacon_ie_len +
+ evt->assoc_req_len +
+ assoc_resp_ie_offset];
+ assoc_resp_ielen = evt->assoc_resp_len - assoc_resp_ie_offset;
+ if (evt->assoc_resp_len <= assoc_resp_ie_offset) {
+ assoc_resp_ie = NULL;
+ assoc_resp_ielen = 0;
+ }
+
+ if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
+ (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
+ if (wdev->sme_state != CFG80211_SME_CONNECTING) {
+ wil_err(wil, "Not in connecting state\n");
+ return;
+ }
+ del_timer_sync(&wil->connect_timer);
+ cfg80211_connect_result(ndev, evt->bssid,
+ assoc_req_ie, assoc_req_ielen,
+ assoc_resp_ie, assoc_resp_ielen,
+ WLAN_STATUS_SUCCESS, GFP_KERNEL);
+
+ } else if ((wdev->iftype == NL80211_IFTYPE_AP) ||
+ (wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+ memset(&sinfo, 0, sizeof(sinfo));
+
+ sinfo.generation = wil->sinfo_gen++;
+
+ if (assoc_req_ie) {
+ sinfo.assoc_req_ies = assoc_req_ie;
+ sinfo.assoc_req_ies_len = assoc_req_ielen;
+ sinfo.filled |= STATION_INFO_ASSOC_REQ_IES;
+ }
+
+ cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL);
+ }
+ set_bit(wil_status_fwconnected, &wil->status);
+
+ /* FIXME FW can transmit only ucast frames to peer */
+ /* FIXME real ring_id instead of hard coded 0 */
+ memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN);
+
+ wil->pending_connect_cid = evt->cid;
+ queue_work(wil->wmi_wq_conn, &wil->wmi_connect_worker);
+}
+
+static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ struct wmi_disconnect_event *evt = d;
+
+ wil_dbg_WMI(wil, "Disconnect %pM reason %d proto %d wmi\n",
+ evt->bssid,
+ evt->protocol_reason_status, evt->disconnect_reason);
+
+ wil->sinfo_gen++;
+
+ wil6210_disconnect(wil, evt->bssid);
+ clear_bit(wil_status_dontscan, &wil->status);
+}
+
+static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct wmi_notify_req_done_event *evt = d;
+
+ if (len < sizeof(*evt)) {
+ wil_err(wil, "Short NOTIFY event\n");
+ return;
+ }
+
+ wil->stats.tsf = le64_to_cpu(evt->tsf);
+ wil->stats.snr = le32_to_cpu(evt->snr_val);
+ wil->stats.bf_mcs = le16_to_cpu(evt->bf_mcs);
+ wil->stats.my_rx_sector = le16_to_cpu(evt->my_rx_sector);
+ wil->stats.my_tx_sector = le16_to_cpu(evt->my_tx_sector);
+ wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector);
+ wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector);
+ wil_dbg_WMI(wil, "Link status, MCS %d TSF 0x%016llx\n"
+ "BF status 0x%08x SNR 0x%08x\n"
+ "Tx Tpt %d goodput %d Rx goodput %d\n"
+ "Sectors(rx:tx) my %d:%d peer %d:%d\n",
+ wil->stats.bf_mcs, wil->stats.tsf, evt->status,
+ wil->stats.snr, le32_to_cpu(evt->tx_tpt),
+ le32_to_cpu(evt->tx_goodput), le32_to_cpu(evt->rx_goodput),
+ wil->stats.my_rx_sector, wil->stats.my_tx_sector,
+ wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
+}
+
+/*
+ * Firmware reports EAPOL frame using WME event.
+ * Reconstruct Ethernet frame and deliver it via normal Rx
+ */
+static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wmi_eapol_rx_event *evt = d;
+ u16 eapol_len = le16_to_cpu(evt->eapol_len);
+ int sz = eapol_len + ETH_HLEN;
+ struct sk_buff *skb;
+ struct ethhdr *eth;
+
+ wil_dbg_WMI(wil, "EAPOL len %d from %pM\n", eapol_len,
+ evt->src_mac);
+
+ if (eapol_len > 196) { /* TODO: revisit size limit */
+ wil_err(wil, "EAPOL too large\n");
+ return;
+ }
+
+ skb = alloc_skb(sz, GFP_KERNEL);
+ if (!skb) {
+ wil_err(wil, "Failed to allocate skb\n");
+ return;
+ }
+ eth = (struct ethhdr *)skb_put(skb, ETH_HLEN);
+ memcpy(eth->h_dest, ndev->dev_addr, ETH_ALEN);
+ memcpy(eth->h_source, evt->src_mac, ETH_ALEN);
+ eth->h_proto = cpu_to_be16(ETH_P_PAE);
+ memcpy(skb_put(skb, eapol_len), evt->eapol, eapol_len);
+ skb->protocol = eth_type_trans(skb, ndev);
+ if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += skb->len;
+ } else {
+ ndev->stats.rx_dropped++;
+ }
+}
+
+static const struct {
+ int eventid;
+ void (*handler)(struct wil6210_priv *wil, int eventid,
+ void *data, int data_len);
+} wmi_evt_handlers[] = {
+ {WMI_READY_EVENTID, wmi_evt_ready},
+ {WMI_FW_READY_EVENTID, wmi_evt_fw_ready},
+ {WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt},
+ {WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete},
+ {WMI_CONNECT_EVENTID, wmi_evt_connect},
+ {WMI_DISCONNECT_EVENTID, wmi_evt_disconnect},
+ {WMI_NOTIFY_REQ_DONE_EVENTID, wmi_evt_notify},
+ {WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx},
+};
+
+/*
+ * Run in IRQ context
+ * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev
+ * that will be eventually handled by the @wmi_event_worker in the thread
+ * context of thread "wil6210_wmi"
+ */
+void wmi_recv_cmd(struct wil6210_priv *wil)
+{
+ struct wil6210_mbox_ring_desc d_tail;
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx;
+ struct pending_wmi_event *evt;
+ u8 *cmd;
+ void __iomem *src;
+ ulong flags;
+
+ for (;;) {
+ u16 len;
+
+ r->head = ioread32(wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx.head));
+ if (r->tail == r->head)
+ return;
+
+ /* read cmd from tail */
+ wil_memcpy_fromio_32(&d_tail, wil->csr + HOSTADDR(r->tail),
+ sizeof(struct wil6210_mbox_ring_desc));
+ if (d_tail.sync == 0) {
+ wil_err(wil, "Mbox evt not owned by FW?\n");
+ return;
+ }
+
+ if (0 != wmi_read_hdr(wil, d_tail.addr, &hdr)) {
+ wil_err(wil, "Mbox evt at 0x%08x?\n",
+ le32_to_cpu(d_tail.addr));
+ return;
+ }
+
+ len = le16_to_cpu(hdr.len);
+ src = wmi_buffer(wil, d_tail.addr) +
+ sizeof(struct wil6210_mbox_hdr);
+ evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event,
+ event.wmi) + len, 4),
+ GFP_KERNEL);
+ if (!evt) {
+ wil_err(wil, "kmalloc for WMI event (%d) failed\n",
+ len);
+ return;
+ }
+ evt->event.hdr = hdr;
+ cmd = (void *)&evt->event.wmi;
+ wil_memcpy_fromio_32(cmd, src, len);
+ /* mark entry as empty */
+ iowrite32(0, wil->csr + HOSTADDR(r->tail) +
+ offsetof(struct wil6210_mbox_ring_desc, sync));
+ /* indicate */
+ wil_dbg_WMI(wil, "Mbox evt %04x %04x %04x %02x\n",
+ le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type),
+ hdr.flags);
+ if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) &&
+ (len >= sizeof(struct wil6210_mbox_hdr_wmi))) {
+ wil_dbg_WMI(wil, "WMI event 0x%04x\n",
+ evt->event.wmi.id);
+ }
+ wil_hex_dump_WMI("evt ", DUMP_PREFIX_OFFSET, 16, 1,
+ &evt->event.hdr, sizeof(hdr) + len, true);
+
+ /* advance tail */
+ r->tail = r->base + ((r->tail - r->base +
+ sizeof(struct wil6210_mbox_ring_desc)) % r->size);
+ iowrite32(r->tail, wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx.tail));
+
+ /* add to the pending list */
+ spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+ list_add_tail(&evt->list, &wil->pending_wmi_ev);
+ spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+ {
+ int q = queue_work(wil->wmi_wq,
+ &wil->wmi_event_worker);
+ wil_dbg_WMI(wil, "queue_work -> %d\n", q);
+ }
+ }
+}
+
+int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
+ u16 reply_id, void *reply, u8 reply_size, int to_msec)
+{
+ int rc;
+ int remain;
+
+ mutex_lock(&wil->wmi_mutex);
+
+ rc = __wmi_send(wil, cmdid, buf, len);
+ if (rc)
+ goto out;
+
+ wil->reply_id = reply_id;
+ wil->reply_buf = reply;
+ wil->reply_size = reply_size;
+ remain = wait_for_completion_timeout(&wil->wmi_ready,
+ msecs_to_jiffies(to_msec));
+ if (0 == remain) {
+ wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n",
+ cmdid, reply_id, to_msec);
+ rc = -ETIME;
+ } else {
+ wil_dbg_WMI(wil,
+ "wmi_call(0x%04x->0x%04x) completed in %d msec\n",
+ cmdid, reply_id,
+ to_msec - jiffies_to_msecs(remain));
+ }
+ wil->reply_id = 0;
+ wil->reply_buf = NULL;
+ wil->reply_size = 0;
+ out:
+ mutex_unlock(&wil->wmi_mutex);
+
+ return rc;
+}
+
+int wmi_echo(struct wil6210_priv *wil)
+{
+ struct wmi_echo_cmd cmd = {
+ .value = cpu_to_le32(0x12345678),
+ };
+
+ return wmi_call(wil, WMI_ECHO_CMDID, &cmd, sizeof(cmd),
+ WMI_ECHO_RSP_EVENTID, NULL, 0, 20);
+}
+
+int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
+{
+ struct wmi_set_mac_address_cmd cmd;
+
+ memcpy(cmd.mac, addr, ETH_ALEN);
+
+ wil_dbg_WMI(wil, "Set MAC %pM\n", addr);
+
+ return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype)
+{
+ struct wmi_bcon_ctrl_cmd cmd = {
+ .bcon_interval = cpu_to_le16(bi),
+ .network_type = wmi_nettype,
+ .disable_sec_offload = 1,
+ };
+
+ if (!wil->secure_pcp)
+ cmd.disable_sec = 1;
+
+ return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid)
+{
+ struct wmi_set_ssid_cmd cmd = {
+ .ssid_len = cpu_to_le32(ssid_len),
+ };
+
+ if (ssid_len > sizeof(cmd.ssid))
+ return -EINVAL;
+
+ memcpy(cmd.ssid, ssid, ssid_len);
+
+ return wmi_send(wil, WMI_SET_SSID_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid)
+{
+ int rc;
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_set_ssid_cmd cmd;
+ } __packed reply;
+ int len; /* reply.cmd.ssid_len in CPU order */
+
+ rc = wmi_call(wil, WMI_GET_SSID_CMDID, NULL, 0, WMI_GET_SSID_EVENTID,
+ &reply, sizeof(reply), 20);
+ if (rc)
+ return rc;
+
+ len = le32_to_cpu(reply.cmd.ssid_len);
+ if (len > sizeof(reply.cmd.ssid))
+ return -EINVAL;
+
+ *ssid_len = len;
+ memcpy(ssid, reply.cmd.ssid, len);
+
+ return 0;
+}
+
+int wmi_set_channel(struct wil6210_priv *wil, int channel)
+{
+ struct wmi_set_pcp_channel_cmd cmd = {
+ .channel = channel - 1,
+ };
+
+ return wmi_send(wil, WMI_SET_PCP_CHANNEL_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_get_channel(struct wil6210_priv *wil, int *channel)
+{
+ int rc;
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_set_pcp_channel_cmd cmd;
+ } __packed reply;
+
+ rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, NULL, 0,
+ WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20);
+ if (rc)
+ return rc;
+
+ if (reply.cmd.channel > 3)
+ return -EINVAL;
+
+ *channel = reply.cmd.channel + 1;
+
+ return 0;
+}
+
+int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb)
+{
+ struct wmi_eapol_tx_cmd *cmd;
+ struct ethhdr *eth;
+ u16 eapol_len = skb->len - ETH_HLEN;
+ void *eapol = skb->data + ETH_HLEN;
+ uint i;
+ int rc;
+
+ skb_set_mac_header(skb, 0);
+ eth = eth_hdr(skb);
+ wil_dbg_WMI(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest);
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+ if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0)
+ goto found_dest;
+ }
+
+ return -EINVAL;
+
+ found_dest:
+ /* find out eapol data & len */
+ cmd = kzalloc(sizeof(*cmd) + eapol_len, GFP_KERNEL);
+ if (!cmd)
+ return -EINVAL;
+
+ memcpy(cmd->dst_mac, eth->h_dest, ETH_ALEN);
+ cmd->eapol_len = cpu_to_le16(eapol_len);
+ memcpy(cmd->eapol, eapol, eapol_len);
+ rc = wmi_send(wil, WMI_EAPOL_TX_CMDID, cmd, sizeof(*cmd) + eapol_len);
+ kfree(cmd);
+
+ return rc;
+}
+
+int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr)
+{
+ struct wmi_delete_cipher_key_cmd cmd = {
+ .key_index = key_index,
+ };
+
+ if (mac_addr)
+ memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
+
+ return wmi_send(wil, WMI_DELETE_CIPHER_KEY_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr, int key_len, const void *key)
+{
+ struct wmi_add_cipher_key_cmd cmd = {
+ .key_index = key_index,
+ .key_usage = WMI_KEY_USE_PAIRWISE,
+ .key_len = key_len,
+ };
+
+ if (!key || (key_len > sizeof(cmd.key)))
+ return -EINVAL;
+
+ memcpy(cmd.key, key, key_len);
+ if (mac_addr)
+ memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
+
+ return wmi_send(wil, WMI_ADD_CIPHER_KEY_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie)
+{
+ int rc;
+ u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len;
+ struct wmi_set_appie_cmd *cmd = kzalloc(len, GFP_KERNEL);
+ if (!cmd) {
+ wil_err(wil, "kmalloc(%d) failed\n", len);
+ return -ENOMEM;
+ }
+
+ cmd->mgmt_frm_type = type;
+ /* BUG: FW API define ieLen as u8. Will fix FW */
+ cmd->ie_len = cpu_to_le16(ie_len);
+ memcpy(cmd->ie_info, ie, ie_len);
+ rc = wmi_send(wil, WMI_SET_APPIE_CMDID, &cmd, len);
+ kfree(cmd);
+
+ return rc;
+}
+
+void wmi_event_flush(struct wil6210_priv *wil)
+{
+ struct pending_wmi_event *evt, *t;
+
+ wil_dbg_WMI(wil, "%s()\n", __func__);
+
+ list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) {
+ list_del(&evt->list);
+ kfree(evt);
+ }
+}
+
+static bool wmi_evt_call_handler(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(wmi_evt_handlers); i++) {
+ if (wmi_evt_handlers[i].eventid == id) {
+ wmi_evt_handlers[i].handler(wil, id, d, len);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void wmi_event_handle(struct wil6210_priv *wil,
+ struct wil6210_mbox_hdr *hdr)
+{
+ u16 len = le16_to_cpu(hdr->len);
+
+ if ((hdr->type == WIL_MBOX_HDR_TYPE_WMI) &&
+ (len >= sizeof(struct wil6210_mbox_hdr_wmi))) {
+ struct wil6210_mbox_hdr_wmi *wmi = (void *)(&hdr[1]);
+ void *evt_data = (void *)(&wmi[1]);
+ u16 id = le16_to_cpu(wmi->id);
+ /* check if someone waits for this event */
+ if (wil->reply_id && wil->reply_id == id) {
+ if (wil->reply_buf) {
+ memcpy(wil->reply_buf, wmi,
+ min(len, wil->reply_size));
+ } else {
+ wmi_evt_call_handler(wil, id, evt_data,
+ len - sizeof(*wmi));
+ }
+ wil_dbg_WMI(wil, "Complete WMI 0x%04x\n", id);
+ complete(&wil->wmi_ready);
+ return;
+ }
+ /* unsolicited event */
+ /* search for handler */
+ if (!wmi_evt_call_handler(wil, id, evt_data,
+ len - sizeof(*wmi))) {
+ wil_err(wil, "Unhandled event 0x%04x\n", id);
+ }
+ } else {
+ wil_err(wil, "Unknown event type\n");
+ print_hex_dump(KERN_ERR, "evt?? ", DUMP_PREFIX_OFFSET, 16, 1,
+ hdr, sizeof(*hdr) + len, true);
+ }
+}
+
+/*
+ * Retrieve next WMI event from the pending list
+ */
+static struct list_head *next_wmi_ev(struct wil6210_priv *wil)
+{
+ ulong flags;
+ struct list_head *ret = NULL;
+
+ spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+
+ if (!list_empty(&wil->pending_wmi_ev)) {
+ ret = wil->pending_wmi_ev.next;
+ list_del(ret);
+ }
+
+ spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+
+ return ret;
+}
+
+/*
+ * Handler for the WMI events
+ */
+void wmi_event_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ wmi_event_worker);
+ struct pending_wmi_event *evt;
+ struct list_head *lh;
+
+ while ((lh = next_wmi_ev(wil)) != NULL) {
+ evt = list_entry(lh, struct pending_wmi_event, list);
+ wmi_event_handle(wil, &evt->event.hdr);
+ kfree(evt);
+ }
+}
+
+void wmi_connect_worker(struct work_struct *work)
+{
+ int rc;
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ wmi_connect_worker);
+
+ if (wil->pending_connect_cid < 0) {
+ wil_err(wil, "No connection pending\n");
+ return;
+ }
+
+ wil_dbg_WMI(wil, "Configure for connection CID %d\n",
+ wil->pending_connect_cid);
+
+ rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE,
+ wil->pending_connect_cid, 0);
+ wil->pending_connect_cid = -1;
+ if (rc == 0)
+ wil_link_on(wil);
+}
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
new file mode 100644
index 0000000..3bbf875
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -0,0 +1,1116 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2006-2012 Wilocity .
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI) for the Wilocity
+ * MARLON 60 Gigabit wireless solution.
+ * It includes definitions of all the commands and events.
+ * Commands are messages from the host to the WM.
+ * Events are messages from the WM to the host.
+ */
+
+#ifndef __WILOCITY_WMI_H__
+#define __WILOCITY_WMI_H__
+
+/* General */
+
+#define WMI_MAC_LEN (6)
+#define WMI_PROX_RANGE_NUM (3)
+
+/* List of Commands */
+enum wmi_command_id {
+ WMI_CONNECT_CMDID = 0x0001,
+ WMI_DISCONNECT_CMDID = 0x0003,
+ WMI_START_SCAN_CMDID = 0x0007,
+ WMI_SET_BSS_FILTER_CMDID = 0x0009,
+ WMI_SET_PROBED_SSID_CMDID = 0x000a,
+ WMI_SET_LISTEN_INT_CMDID = 0x000b,
+ WMI_BCON_CTRL_CMDID = 0x000f,
+ WMI_ADD_CIPHER_KEY_CMDID = 0x0016,
+ WMI_DELETE_CIPHER_KEY_CMDID = 0x0017,
+ WMI_SET_APPIE_CMDID = 0x003f,
+ WMI_GET_APPIE_CMDID = 0x0040,
+ WMI_SET_WSC_STATUS_CMDID = 0x0041,
+ WMI_PXMT_RANGE_CFG_CMDID = 0x0042,
+ WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x0043,
+ WMI_FAST_MEM_ACC_MODE_CMDID = 0x0300,
+ WMI_MEM_READ_CMDID = 0x0800,
+ WMI_MEM_WR_CMDID = 0x0801,
+ WMI_ECHO_CMDID = 0x0803,
+ WMI_DEEP_ECHO_CMDID = 0x0804,
+ WMI_CONFIG_MAC_CMDID = 0x0805,
+ WMI_CONFIG_PHY_DEBUG_CMDID = 0x0806,
+ WMI_ADD_STATION_CMDID = 0x0807,
+ WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x0808,
+ WMI_PHY_GET_STATISTICS_CMDID = 0x0809,
+ WMI_FS_TUNE_CMDID = 0x080a,
+ WMI_CORR_MEASURE_CMDID = 0x080b,
+ WMI_TEMP_SENSE_CMDID = 0x080e,
+ WMI_DC_CALIB_CMDID = 0x080f,
+ WMI_SEND_TONE_CMDID = 0x0810,
+ WMI_IQ_TX_CALIB_CMDID = 0x0811,
+ WMI_IQ_RX_CALIB_CMDID = 0x0812,
+ WMI_SET_UCODE_IDLE_CMDID = 0x0813,
+ WMI_SET_WORK_MODE_CMDID = 0x0815,
+ WMI_LO_LEAKAGE_CALIB_CMDID = 0x0816,
+ WMI_MARLON_R_ACTIVATE_CMDID = 0x0817,
+ WMI_MARLON_R_READ_CMDID = 0x0818,
+ WMI_MARLON_R_WRITE_CMDID = 0x0819,
+ WMI_MARLON_R_TXRX_SEL_CMDID = 0x081a,
+ MAC_IO_STATIC_PARAMS_CMDID = 0x081b,
+ MAC_IO_DYNAMIC_PARAMS_CMDID = 0x081c,
+ WMI_SILENT_RSSI_CALIB_CMDID = 0x081d,
+ WMI_CFG_RX_CHAIN_CMDID = 0x0820,
+ WMI_VRING_CFG_CMDID = 0x0821,
+ WMI_RX_ON_CMDID = 0x0822,
+ WMI_VRING_BA_EN_CMDID = 0x0823,
+ WMI_VRING_BA_DIS_CMDID = 0x0824,
+ WMI_RCP_ADDBA_RESP_CMDID = 0x0825,
+ WMI_RCP_DELBA_CMDID = 0x0826,
+ WMI_SET_SSID_CMDID = 0x0827,
+ WMI_GET_SSID_CMDID = 0x0828,
+ WMI_SET_PCP_CHANNEL_CMDID = 0x0829,
+ WMI_GET_PCP_CHANNEL_CMDID = 0x082a,
+ WMI_SW_TX_REQ_CMDID = 0x082b,
+ WMI_RX_OFF_CMDID = 0x082c,
+ WMI_READ_MAC_RXQ_CMDID = 0x0830,
+ WMI_READ_MAC_TXQ_CMDID = 0x0831,
+ WMI_WRITE_MAC_RXQ_CMDID = 0x0832,
+ WMI_WRITE_MAC_TXQ_CMDID = 0x0833,
+ WMI_WRITE_MAC_XQ_FIELD_CMDID = 0x0834,
+ WMI_MLME_PUSH_CMDID = 0x0835,
+ WMI_BEAMFORMING_MGMT_CMDID = 0x0836,
+ WMI_BF_TXSS_MGMT_CMDID = 0x0837,
+ WMI_BF_SM_MGMT_CMDID = 0x0838,
+ WMI_BF_RXSS_MGMT_CMDID = 0x0839,
+ WMI_SET_SECTORS_CMDID = 0x0849,
+ WMI_MAINTAIN_PAUSE_CMDID = 0x0850,
+ WMI_MAINTAIN_RESUME_CMDID = 0x0851,
+ WMI_RS_MGMT_CMDID = 0x0852,
+ WMI_RF_MGMT_CMDID = 0x0853,
+ /* Performance monitoring commands */
+ WMI_BF_CTRL_CMDID = 0x0862,
+ WMI_NOTIFY_REQ_CMDID = 0x0863,
+ WMI_GET_STATUS_CMDID = 0x0864,
+ WMI_UNIT_TEST_CMDID = 0x0900,
+ WMI_HICCUP_CMDID = 0x0901,
+ WMI_FLASH_READ_CMDID = 0x0902,
+ WMI_FLASH_WRITE_CMDID = 0x0903,
+ WMI_SECURITY_UNIT_TEST_CMDID = 0x0904,
+
+ WMI_SET_MAC_ADDRESS_CMDID = 0xf003,
+ WMI_ABORT_SCAN_CMDID = 0xf007,
+ WMI_SET_PMK_CMDID = 0xf028,
+
+ WMI_SET_PROMISCUOUS_MODE_CMDID = 0xf041,
+ WMI_GET_PMK_CMDID = 0xf048,
+ WMI_SET_PASSPHRASE_CMDID = 0xf049,
+ WMI_SEND_ASSOC_RES_CMDID = 0xf04a,
+ WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xf04b,
+ WMI_EAPOL_TX_CMDID = 0xf04c,
+ WMI_MAC_ADDR_REQ_CMDID = 0xf04d,
+ WMI_FW_VER_CMDID = 0xf04e,
+};
+
+/*
+ * Commands data structures
+ */
+
+/*
+ * Frame Types
+ */
+enum wmi_mgmt_frame_type {
+ WMI_FRAME_BEACON = 0,
+ WMI_FRAME_PROBE_REQ = 1,
+ WMI_FRAME_PROBE_RESP = 2,
+ WMI_FRAME_ASSOC_REQ = 3,
+ WMI_FRAME_ASSOC_RESP = 4,
+ WMI_NUM_MGMT_FRAME,
+};
+
+/*
+ * WMI_CONNECT_CMDID
+ */
+enum wmi_network_type {
+ WMI_NETTYPE_INFRA = 0x01,
+ WMI_NETTYPE_ADHOC = 0x02,
+ WMI_NETTYPE_ADHOC_CREATOR = 0x04,
+ WMI_NETTYPE_AP = 0x10,
+ WMI_NETTYPE_P2P = 0x20,
+ WMI_NETTYPE_WBE = 0x40, /* PCIE over 60g */
+};
+
+enum wmi_dot11_auth_mode {
+ WMI_AUTH11_OPEN = 0x01,
+ WMI_AUTH11_SHARED = 0x02,
+ WMI_AUTH11_LEAP = 0x04,
+ WMI_AUTH11_WSC = 0x08,
+};
+
+enum wmi_auth_mode {
+ WMI_AUTH_NONE = 0x01,
+ WMI_AUTH_WPA = 0x02,
+ WMI_AUTH_WPA2 = 0x04,
+ WMI_AUTH_WPA_PSK = 0x08,
+ WMI_AUTH_WPA2_PSK = 0x10,
+ WMI_AUTH_WPA_CCKM = 0x20,
+ WMI_AUTH_WPA2_CCKM = 0x40,
+};
+
+enum wmi_crypto_type {
+ WMI_CRYPT_NONE = 0x01,
+ WMI_CRYPT_WEP = 0x02,
+ WMI_CRYPT_TKIP = 0x04,
+ WMI_CRYPT_AES = 0x08,
+ WMI_CRYPT_AES_GCMP = 0x20,
+};
+
+
+enum wmi_connect_ctrl_flag_bits {
+ WMI_CONNECT_ASSOC_POLICY_USER = 0x0001,
+ WMI_CONNECT_SEND_REASSOC = 0x0002,
+ WMI_CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+ WMI_CONNECT_PROFILE_MATCH_DONE = 0x0008,
+ WMI_CONNECT_IGNORE_AAC_BEACON = 0x0010,
+ WMI_CONNECT_CSA_FOLLOW_BSS = 0x0020,
+ WMI_CONNECT_DO_WPA_OFFLOAD = 0x0040,
+ WMI_CONNECT_DO_NOT_DEAUTH = 0x0080,
+};
+
+#define WMI_MAX_SSID_LEN (32)
+
+struct wmi_connect_cmd {
+ u8 network_type;
+ u8 dot11_auth_mode;
+ u8 auth_mode;
+ u8 pairwise_crypto_type;
+ u8 pairwise_crypto_len;
+ u8 group_crypto_type;
+ u8 group_crypto_len;
+ u8 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+ u8 channel;
+ u8 reserved0;
+ u8 bssid[WMI_MAC_LEN];
+ __le32 ctrl_flags;
+ u8 dst_mac[WMI_MAC_LEN];
+ u8 reserved1[2];
+} __packed;
+
+
+/*
+ * WMI_RECONNECT_CMDID
+ */
+struct wmi_reconnect_cmd {
+ u8 channel; /* hint */
+ u8 reserved;
+ u8 bssid[WMI_MAC_LEN]; /* mandatory if set */
+} __packed;
+
+
+/*
+ * WMI_SET_PMK_CMDID
+ */
+
+#define WMI_MIN_KEY_INDEX (0)
+#define WMI_MAX_KEY_INDEX (3)
+#define WMI_MAX_KEY_LEN (32)
+#define WMI_PASSPHRASE_LEN (64)
+#define WMI_PMK_LEN (32)
+
+struct wmi_set_pmk_cmd {
+ u8 pmk[WMI_PMK_LEN];
+} __packed;
+
+
+/*
+ * WMI_SET_PASSPHRASE_CMDID
+ */
+struct wmi_set_passphrase_cmd {
+ u8 ssid[WMI_MAX_SSID_LEN];
+ u8 passphrase[WMI_PASSPHRASE_LEN];
+ u8 ssid_len;
+ u8 passphrase_len;
+} __packed;
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+enum wmi_key_usage {
+ WMI_KEY_USE_PAIRWISE = 0,
+ WMI_KEY_USE_GROUP = 1,
+ WMI_KEY_USE_TX = 2, /* default Tx Key - Static WEP only */
+};
+
+struct wmi_add_cipher_key_cmd {
+ u8 key_index;
+ u8 key_type;
+ u8 key_usage; /* enum wmi_key_usage */
+ u8 key_len;
+ u8 key_rsc[8]; /* key replay sequence counter */
+ u8 key[WMI_MAX_KEY_LEN];
+ u8 key_op_ctrl; /* Additional Key Control information */
+ u8 mac[WMI_MAC_LEN];
+} __packed;
+
+/*
+ * WMI_DELETE_CIPHER_KEY_CMDID
+ */
+struct wmi_delete_cipher_key_cmd {
+ u8 key_index;
+ u8 mac[WMI_MAC_LEN];
+} __packed;
+
+
+/*
+ * WMI_START_SCAN_CMDID
+ *
+ * Start L1 scan operation
+ *
+ * Returned events:
+ * - WMI_RX_MGMT_PACKET_EVENTID - for every probe resp.
+ * - WMI_SCAN_COMPLETE_EVENTID
+ */
+enum wmi_scan_type {
+ WMI_LONG_SCAN = 0,
+ WMI_SHORT_SCAN = 1,
+};
+
+struct wmi_start_scan_cmd {
+ u8 reserved[8];
+ __le32 home_dwell_time; /* Max duration in the home channel(ms) */
+ __le32 force_scan_interval; /* Time interval between scans (ms)*/
+ u8 scan_type; /* wmi_scan_type */
+ u8 num_channels; /* how many channels follow */
+ struct {
+ u8 channel;
+ u8 reserved;
+ } channel_list[0]; /* channels ID's */
+ /* 0 - 58320 MHz */
+ /* 1 - 60480 MHz */
+ /* 2 - 62640 MHz */
+} __packed;
+
+/*
+ * WMI_SET_PROBED_SSID_CMDID
+ */
+#define MAX_PROBED_SSID_INDEX (15)
+
+enum wmi_ssid_flag {
+ WMI_SSID_FLAG_DISABLE = 0, /* disables entry */
+ WMI_SSID_FLAG_SPECIFIC = 1, /* probes specified ssid */
+ WMI_SSID_FLAG_ANY = 2, /* probes for any ssid */
+};
+
+struct wmi_probed_ssid_cmd {
+ u8 entry_index; /* 0 to MAX_PROBED_SSID_INDEX */
+ u8 flag; /* enum wmi_ssid_flag */
+ u8 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_SET_APPIE_CMDID
+ * Add Application specified IE to a management frame
+ */
+struct wmi_set_appie_cmd {
+ u8 mgmt_frm_type; /* enum wmi_mgmt_frame_type */
+ u8 reserved;
+ __le16 ie_len; /* Length of the IE to be added to MGMT frame */
+ u8 ie_info[0];
+} __packed;
+
+#define WMI_MAX_IE_LEN (1024)
+
+struct wmi_pxmt_range_cfg_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 range;
+} __packed;
+
+struct wmi_pxmt_snr2_range_cfg_cmd {
+ s8 snr2range_arr[WMI_PROX_RANGE_NUM-1];
+} __packed;
+
+/*
+ * WMI_RF_MGMT_CMDID
+ */
+enum wmi_rf_mgmt_type {
+ WMI_RF_MGMT_W_DISABLE = 0,
+ WMI_RF_MGMT_W_ENABLE = 1,
+ WMI_RF_MGMT_GET_STATUS = 2,
+};
+
+struct wmi_rf_mgmt_cmd {
+ __le32 rf_mgmt_type;
+} __packed;
+
+/*
+ * WMI_SET_SSID_CMDID
+ */
+struct wmi_set_ssid_cmd {
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_SET_PCP_CHANNEL_CMDID
+ */
+struct wmi_set_pcp_channel_cmd {
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_BCON_CTRL_CMDID
+ */
+struct wmi_bcon_ctrl_cmd {
+ __le16 bcon_interval;
+ __le16 frag_num;
+ __le64 ss_mask;
+ u8 network_type;
+ u8 reserved;
+ u8 disable_sec_offload;
+ u8 disable_sec;
+} __packed;
+
+/*
+ * WMI_SW_TX_REQ_CMDID
+ */
+struct wmi_sw_tx_req_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 len;
+ u8 payload[0];
+} __packed;
+
+/*
+ * WMI_VRING_CFG_CMDID
+ */
+
+struct wmi_sw_ring_cfg {
+ __le64 ring_mem_base;
+ __le16 ring_size;
+ __le16 max_mpdu_size;
+} __packed;
+
+struct wmi_vring_cfg_schd {
+ __le16 priority;
+ __le16 timeslot_us;
+} __packed;
+
+enum wmi_vring_cfg_encap_trans_type {
+ WMI_VRING_ENC_TYPE_802_3 = 0,
+ WMI_VRING_ENC_TYPE_NATIVE_WIFI = 1,
+};
+
+enum wmi_vring_cfg_ds_cfg {
+ WMI_VRING_DS_PBSS = 0,
+ WMI_VRING_DS_STATION = 1,
+ WMI_VRING_DS_AP = 2,
+ WMI_VRING_DS_ADDR4 = 3,
+};
+
+enum wmi_vring_cfg_nwifi_ds_trans_type {
+ WMI_NWIFI_TX_TRANS_MODE_NO = 0,
+ WMI_NWIFI_TX_TRANS_MODE_AP2PBSS = 1,
+ WMI_NWIFI_TX_TRANS_MODE_STA2PBSS = 2,
+};
+
+enum wmi_vring_cfg_schd_params_priority {
+ WMI_SCH_PRIO_REGULAR = 0,
+ WMI_SCH_PRIO_HIGH = 1,
+};
+
+struct wmi_vring_cfg {
+ struct wmi_sw_ring_cfg tx_sw_ring;
+ u8 ringid; /* 0-23 vrings */
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 encap_trans_type;
+ u8 ds_cfg; /* 802.3 DS cfg */
+ u8 nwifi_ds_trans_type;
+
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_POS (0)
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_LEN (1)
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_MSK (0x1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_POS (1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_LEN (1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_MSK (0x2)
+ u8 mac_ctrl;
+
+ #define VRING_CFG_TO_RESOLUTION_VALUE_POS (0)
+ #define VRING_CFG_TO_RESOLUTION_VALUE_LEN (6)
+ #define VRING_CFG_TO_RESOLUTION_VALUE_MSK (0x3F)
+ u8 to_resolution;
+ u8 agg_max_wsize;
+ struct wmi_vring_cfg_schd schd_params;
+} __packed;
+
+enum wmi_vring_cfg_cmd_action {
+ WMI_VRING_CMD_ADD = 0,
+ WMI_VRING_CMD_MODIFY = 1,
+ WMI_VRING_CMD_DELETE = 2,
+};
+
+struct wmi_vring_cfg_cmd {
+ __le32 action;
+ struct wmi_vring_cfg vring_cfg;
+} __packed;
+
+/*
+ * WMI_VRING_BA_EN_CMDID
+ */
+struct wmi_vring_ba_en_cmd {
+ u8 ringid;
+ u8 agg_max_wsize;
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_VRING_BA_DIS_CMDID
+ */
+struct wmi_vring_ba_dis_cmd {
+ u8 ringid;
+ u8 reserved;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_NOTIFY_REQ_CMDID
+ */
+struct wmi_notify_req_cmd {
+ u8 cid;
+ u8 reserved[3];
+ __le32 interval_usec;
+} __packed;
+
+/*
+ * WMI_CFG_RX_CHAIN_CMDID
+ */
+enum wmi_sniffer_cfg_mode {
+ WMI_SNIFFER_OFF = 0,
+ WMI_SNIFFER_ON = 1,
+};
+
+enum wmi_sniffer_cfg_phy_info_mode {
+ WMI_SNIFFER_PHY_INFO_DISABLED = 0,
+ WMI_SNIFFER_PHY_INFO_ENABLED = 1,
+};
+
+enum wmi_sniffer_cfg_phy_support {
+ WMI_SNIFFER_CP = 0,
+ WMI_SNIFFER_DP = 1,
+ WMI_SNIFFER_BOTH_PHYS = 2,
+};
+
+struct wmi_sniffer_cfg {
+ __le32 mode; /* enum wmi_sniffer_cfg_mode */
+ __le32 phy_info_mode; /* enum wmi_sniffer_cfg_phy_info_mode */
+ __le32 phy_support; /* enum wmi_sniffer_cfg_phy_support */
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+enum wmi_cfg_rx_chain_cmd_action {
+ WMI_RX_CHAIN_ADD = 0,
+ WMI_RX_CHAIN_DEL = 1,
+};
+
+enum wmi_cfg_rx_chain_cmd_decap_trans_type {
+ WMI_DECAP_TYPE_802_3 = 0,
+ WMI_DECAP_TYPE_NATIVE_WIFI = 1,
+};
+
+enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type {
+ WMI_NWIFI_RX_TRANS_MODE_NO = 0,
+ WMI_NWIFI_RX_TRANS_MODE_PBSS2AP = 1,
+ WMI_NWIFI_RX_TRANS_MODE_PBSS2STA = 2,
+};
+
+struct wmi_cfg_rx_chain_cmd {
+ __le32 action;
+ struct wmi_sw_ring_cfg rx_sw_ring;
+ u8 mid;
+ u8 decap_trans_type;
+
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_POS (0)
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_LEN (1)
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_MSK (0x1)
+ u8 l2_802_3_offload_ctrl;
+
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_POS (0)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_LEN (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_MSK (0x1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_POS (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_LEN (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_MSK (0x2)
+ u8 l2_nwifi_offload_ctrl;
+
+ u8 vlan_id;
+ u8 nwifi_ds_trans_type;
+
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_POS (0)
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_LEN (1)
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_MSK (0x1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS (1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_LEN (1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_MSK (0x2)
+ u8 l3_l4_ctrl;
+
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_POS (0)
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_MSK (0x1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_POS (1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_MSK (0x2)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_POS (2)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_MSK (0x4)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_POS (3)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_MSK (0x8)
+ u8 ring_ctrl;
+
+ __le16 prefetch_thrsh;
+ __le16 wb_thrsh;
+ __le32 itr_value;
+ __le16 host_thrsh;
+ u8 reserved[2];
+ struct wmi_sniffer_cfg sniffer_cfg;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_RESP_CMDID
+ */
+struct wmi_rcp_addba_resp_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ __le16 status_code;
+ __le16 ba_param_set; /* ieee80211_ba_parameterset field to send */
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_RCP_DELBA_CMDID
+ */
+struct wmi_rcp_delba_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 reserved;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_REQ_CMDID
+ */
+struct wmi_rcp_addba_req_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ /* ieee80211_ba_parameterset field as it received */
+ __le16 ba_param_set;
+ __le16 ba_timeout;
+ /* ieee80211_ba_seqstrl field as it received */
+ __le16 ba_seq_ctrl;
+} __packed;
+
+/*
+ * WMI_SET_MAC_ADDRESS_CMDID
+ */
+struct wmi_set_mac_address_cmd {
+ u8 mac[WMI_MAC_LEN];
+ u8 reserved[2];
+} __packed;
+
+
+/*
+* WMI_EAPOL_TX_CMDID
+*/
+struct wmi_eapol_tx_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 eapol_len;
+ u8 eapol[0];
+} __packed;
+
+/*
+ * WMI_ECHO_CMDID
+ *
+ * Check FW is alive
+ *
+ * WMI_DEEP_ECHO_CMDID
+ *
+ * Check FW and ucode are alive
+ *
+ * Returned event: WMI_ECHO_RSP_EVENTID
+ * same event for both commands
+ */
+struct wmi_echo_cmd {
+ __le32 value;
+} __packed;
+
+/*
+ * WMI Events
+ */
+
+/*
+ * List of Events (target to host)
+ */
+enum wmi_event_id {
+ WMI_IMM_RSP_EVENTID = 0x0000,
+ WMI_READY_EVENTID = 0x1001,
+ WMI_CONNECT_EVENTID = 0x1002,
+ WMI_DISCONNECT_EVENTID = 0x1003,
+ WMI_SCAN_COMPLETE_EVENTID = 0x100a,
+ WMI_REPORT_STATISTICS_EVENTID = 0x100b,
+ WMI_RD_MEM_RSP_EVENTID = 0x1800,
+ WMI_FW_READY_EVENTID = 0x1801,
+ WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x0200,
+ WMI_ECHO_RSP_EVENTID = 0x1803,
+ WMI_CONFIG_MAC_DONE_EVENTID = 0x1805,
+ WMI_CONFIG_PHY_DEBUG_DONE_EVENTID = 0x1806,
+ WMI_ADD_STATION_DONE_EVENTID = 0x1807,
+ WMI_ADD_DEBUG_TX_PCKT_DONE_EVENTID = 0x1808,
+ WMI_PHY_GET_STATISTICS_EVENTID = 0x1809,
+ WMI_FS_TUNE_DONE_EVENTID = 0x180a,
+ WMI_CORR_MEASURE_DONE_EVENTID = 0x180b,
+ WMI_TEMP_SENSE_DONE_EVENTID = 0x180e,
+ WMI_DC_CALIB_DONE_EVENTID = 0x180f,
+ WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
+ WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
+ WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
+ WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
+ WMI_MARLON_R_ACTIVATE_DONE_EVENTID = 0x1817,
+ WMI_MARLON_R_READ_DONE_EVENTID = 0x1818,
+ WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
+ WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181a,
+ WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181d,
+
+ WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
+ WMI_VRING_CFG_DONE_EVENTID = 0x1821,
+ WMI_RX_ON_DONE_EVENTID = 0x1822,
+ WMI_BA_STATUS_EVENTID = 0x1823,
+ WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
+ WMI_ADDBA_RESP_SENT_EVENTID = 0x1825,
+ WMI_DELBA_EVENTID = 0x1826,
+ WMI_GET_SSID_EVENTID = 0x1828,
+ WMI_GET_PCP_CHANNEL_EVENTID = 0x182a,
+ WMI_SW_TX_COMPLETE_EVENTID = 0x182b,
+ WMI_RX_OFF_DONE_EVENTID = 0x182c,
+
+ WMI_READ_MAC_RXQ_EVENTID = 0x1830,
+ WMI_READ_MAC_TXQ_EVENTID = 0x1831,
+ WMI_WRITE_MAC_RXQ_EVENTID = 0x1832,
+ WMI_WRITE_MAC_TXQ_EVENTID = 0x1833,
+ WMI_WRITE_MAC_XQ_FIELD_EVENTID = 0x1834,
+
+ WMI_BEAFORMING_MGMT_DONE_EVENTID = 0x1836,
+ WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
+ WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
+ WMI_RS_MGMT_DONE_EVENTID = 0x1852,
+ WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
+ WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
+ WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
+
+ /* Performance monitoring events */
+ WMI_DATA_PORT_OPEN_EVENTID = 0x1860,
+ WMI_WBE_LINKDOWN_EVENTID = 0x1861,
+
+ WMI_BF_CTRL_DONE_EVENTID = 0x1862,
+ WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
+ WMI_GET_STATUS_DONE_EVENTID = 0x1864,
+
+ WMI_UNIT_TEST_EVENTID = 0x1900,
+ WMI_FLASH_READ_DONE_EVENTID = 0x1902,
+ WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
+
+ WMI_SET_CHANNEL_EVENTID = 0x9000,
+ WMI_ASSOC_REQ_EVENTID = 0x9001,
+ WMI_EAPOL_RX_EVENTID = 0x9002,
+ WMI_MAC_ADDR_RESP_EVENTID = 0x9003,
+ WMI_FW_VER_EVENTID = 0x9004,
+};
+
+/*
+ * Events data structures
+ */
+
+/*
+ * WMI_RF_MGMT_STATUS_EVENTID
+ */
+enum wmi_rf_status {
+ WMI_RF_ENABLED = 0,
+ WMI_RF_DISABLED_HW = 1,
+ WMI_RF_DISABLED_SW = 2,
+ WMI_RF_DISABLED_HW_SW = 3,
+};
+
+struct wmi_rf_mgmt_status_event {
+ __le32 rf_status;
+} __packed;
+
+/*
+ * WMI_GET_STATUS_DONE_EVENTID
+ */
+struct wmi_get_status_done_event {
+ __le32 is_associated;
+ u8 cid;
+ u8 reserved0[3];
+ u8 bssid[WMI_MAC_LEN];
+ u8 channel;
+ u8 reserved1;
+ u8 network_type;
+ u8 reserved2[3];
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+ __le32 rf_status;
+ __le32 is_secured;
+} __packed;
+
+/*
+ * WMI_FW_VER_EVENTID
+ */
+struct wmi_fw_ver_event {
+ u8 major;
+ u8 minor;
+ __le16 subminor;
+ __le16 build;
+} __packed;
+
+/*
+* WMI_MAC_ADDR_RESP_EVENTID
+*/
+struct wmi_mac_addr_resp_event {
+ u8 mac[WMI_MAC_LEN];
+ u8 auth_mode;
+ u8 crypt_mode;
+ __le32 offload_mode;
+} __packed;
+
+/*
+* WMI_EAPOL_RX_EVENTID
+*/
+struct wmi_eapol_rx_event {
+ u8 src_mac[WMI_MAC_LEN];
+ __le16 eapol_len;
+ u8 eapol[0];
+} __packed;
+
+/*
+* WMI_READY_EVENTID
+*/
+enum wmi_phy_capability {
+ WMI_11A_CAPABILITY = 1,
+ WMI_11G_CAPABILITY = 2,
+ WMI_11AG_CAPABILITY = 3,
+ WMI_11NA_CAPABILITY = 4,
+ WMI_11NG_CAPABILITY = 5,
+ WMI_11NAG_CAPABILITY = 6,
+ WMI_11AD_CAPABILITY = 7,
+ WMI_11N_CAPABILITY_OFFSET = WMI_11NA_CAPABILITY - WMI_11A_CAPABILITY,
+};
+
+struct wmi_ready_event {
+ __le32 sw_version;
+ __le32 abi_version;
+ u8 mac[WMI_MAC_LEN];
+ u8 phy_capability; /* enum wmi_phy_capability */
+ u8 reserved;
+} __packed;
+
+/*
+ * WMI_NOTIFY_REQ_DONE_EVENTID
+ */
+struct wmi_notify_req_done_event {
+ __le32 status;
+ __le64 tsf;
+ __le32 snr_val;
+ __le32 tx_tpt;
+ __le32 tx_goodput;
+ __le32 rx_goodput;
+ __le16 bf_mcs;
+ __le16 my_rx_sector;
+ __le16 my_tx_sector;
+ __le16 other_rx_sector;
+ __le16 other_tx_sector;
+ __le16 range;
+} __packed;
+
+/*
+ * WMI_CONNECT_EVENTID
+ */
+struct wmi_connect_event {
+ u8 channel;
+ u8 reserved0;
+ u8 bssid[WMI_MAC_LEN];
+ __le16 listen_interval;
+ __le16 beacon_interval;
+ u8 network_type;
+ u8 reserved1[3];
+ u8 beacon_ie_len;
+ u8 assoc_req_len;
+ u8 assoc_resp_len;
+ u8 cid;
+ u8 reserved2[3];
+ u8 assoc_info[0];
+} __packed;
+
+/*
+ * WMI_DISCONNECT_EVENTID
+ */
+enum wmi_disconnect_reason {
+ WMI_DIS_REASON_NO_NETWORK_AVAIL = 1,
+ WMI_DIS_REASON_LOST_LINK = 2, /* bmiss */
+ WMI_DIS_REASON_DISCONNECT_CMD = 3,
+ WMI_DIS_REASON_BSS_DISCONNECTED = 4,
+ WMI_DIS_REASON_AUTH_FAILED = 5,
+ WMI_DIS_REASON_ASSOC_FAILED = 6,
+ WMI_DIS_REASON_NO_RESOURCES_AVAIL = 7,
+ WMI_DIS_REASON_CSERV_DISCONNECT = 8,
+ WMI_DIS_REASON_INVALID_PROFILE = 10,
+ WMI_DIS_REASON_DOT11H_CHANNEL_SWITCH = 11,
+ WMI_DIS_REASON_PROFILE_MISMATCH = 12,
+ WMI_DIS_REASON_CONNECTION_EVICTED = 13,
+ WMI_DIS_REASON_IBSS_MERGE = 14,
+};
+
+struct wmi_disconnect_event {
+ __le16 protocol_reason_status; /* reason code, see 802.11 spec. */
+ u8 bssid[WMI_MAC_LEN]; /* set if known */
+ u8 disconnect_reason; /* see wmi_disconnect_reason_e */
+ u8 assoc_resp_len;
+ u8 assoc_info[0];
+} __packed;
+
+/*
+ * WMI_SCAN_COMPLETE_EVENTID
+ */
+struct wmi_scan_complete_event {
+ __le32 status;
+} __packed;
+
+/*
+ * WMI_BA_STATUS_EVENTID
+ */
+enum wmi_vring_ba_status {
+ WMI_BA_AGREED = 0,
+ WMI_BA_NON_AGREED = 1,
+};
+
+struct wmi_vring_ba_status_event {
+ __le16 status;
+ u8 reserved[2];
+ u8 ringid;
+ u8 agg_wsize;
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_DELBA_EVENTID
+ */
+struct wmi_delba_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 from_initiator;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_VRING_CFG_DONE_EVENTID
+ */
+enum wmi_vring_cfg_done_event_status {
+ WMI_VRING_CFG_SUCCESS = 0,
+ WMI_VRING_CFG_FAILURE = 1,
+};
+
+struct wmi_vring_cfg_done_event {
+ u8 ringid;
+ u8 status;
+ u8 reserved[2];
+ __le32 tx_vring_tail_ptr;
+} __packed;
+
+/*
+ * WMI_ADDBA_RESP_SENT_EVENTID
+ */
+enum wmi_rcp_addba_resp_sent_event_status {
+ WMI_ADDBA_SUCCESS = 0,
+ WMI_ADDBA_FAIL = 1,
+};
+
+struct wmi_rcp_addba_resp_sent_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 reserved;
+ __le16 status;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_REQ_EVENTID
+ */
+struct wmi_rcp_addba_req_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ __le16 ba_param_set; /* ieee80211_ba_parameterset as it received */
+ __le16 ba_timeout;
+ __le16 ba_seq_ctrl; /* ieee80211_ba_seqstrl field as it received */
+} __packed;
+
+/*
+ * WMI_CFG_RX_CHAIN_DONE_EVENTID
+ */
+enum wmi_cfg_rx_chain_done_event_status {
+ WMI_CFG_RX_CHAIN_SUCCESS = 1,
+};
+
+struct wmi_cfg_rx_chain_done_event {
+ __le32 rx_ring_tail_ptr; /* Rx V-Ring Tail pointer */
+ __le32 status;
+} __packed;
+
+/*
+ * WMI_WBE_LINKDOWN_EVENTID
+ */
+enum wmi_wbe_link_down_event_reason {
+ WMI_WBE_REASON_USER_REQUEST = 0,
+ WMI_WBE_REASON_RX_DISASSOC = 1,
+ WMI_WBE_REASON_BAD_PHY_LINK = 2,
+};
+
+struct wmi_wbe_link_down_event {
+ u8 cid;
+ u8 reserved[3];
+ __le32 reason;
+} __packed;
+
+/*
+ * WMI_DATA_PORT_OPEN_EVENTID
+ */
+struct wmi_data_port_open_event {
+ u8 cid;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_GET_PCP_CHANNEL_EVENTID
+ */
+struct wmi_get_pcp_channel_event {
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_SW_TX_COMPLETE_EVENTID
+ */
+enum wmi_sw_tx_status {
+ WMI_TX_SW_STATUS_SUCCESS = 0,
+ WMI_TX_SW_STATUS_FAILED_NO_RESOURCES = 1,
+ WMI_TX_SW_STATUS_FAILED_TX = 2,
+};
+
+struct wmi_sw_tx_complete_event {
+ u8 status; /* enum wmi_sw_tx_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_GET_SSID_EVENTID
+ */
+struct wmi_get_ssid_event {
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_RX_MGMT_PACKET_EVENTID
+ */
+struct wmi_rx_mgmt_info {
+ u8 mcs;
+ s8 snr;
+ __le16 range;
+ __le16 stype;
+ __le16 status;
+ __le32 len;
+ u8 qid;
+ u8 mid;
+ u8 cid;
+ u8 channel; /* From Radio MNGR */
+} __packed;
+
+struct wmi_rx_mgmt_packet_event {
+ struct wmi_rx_mgmt_info info;
+ u8 payload[0];
+} __packed;
+
+/*
+ * WMI_ECHO_RSP_EVENTID
+ */
+struct wmi_echo_event {
+ __le32 echoed_value;
+} __packed;
+
+#endif /* __WILOCITY_WMI_H__ */
--
1.7.10.4
Card wil6210 by Wilocity supports operation on the 60GHz band,
accordingly to the 802.11ad standard.
This development snapshot supports:
- STA, PCP and monitor modes
- security works for STA mode, not integrated yet for PCP mode
- PCP limited to 1 connected STA
PCP is new AP-like entity introduced in 802.11ad
PCP mode emulated as AP mode. For single connection there is no difference
in the data transfer between PCP and AP.
Using the STA and PCP mode, one can assemble fully functional BSS.
throughput of 1.2Gbps achieved with iperf
To start PCP mode, use wpa_supplicant or hostapd.
For wpa_supplicant, use config like:
network={
ssid="test"
mode=2
frequency=60480
key_mgmt=NONE
}
Patch for wpa_supplicant/hostapd submitted.
In the monitor mode, card is able to capture either control or non-control frames
(due to hardware/firmware limitation).
Wil6210 card have on-board flash memory for the firmware, card comes pre-flushed
and no firmware download required on the run time.
Refer to the Documentation/networking/wil6210.txt for more info.
Wiki available at http://wireless.kernel.org/en/users/Drivers/wil6210
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
Documentation/networking/wil6210.txt | 292 +++++++
drivers/net/wireless/ath/wil6210/Kconfig | 30 +
drivers/net/wireless/ath/wil6210/Makefile | 14 +
drivers/net/wireless/ath/wil6210/cfg80211.c | 565 +++++++++++++
drivers/net/wireless/ath/wil6210/debugfs.c | 603 ++++++++++++++
drivers/net/wireless/ath/wil6210/interrupt.c | 471 +++++++++++
drivers/net/wireless/ath/wil6210/main.c | 407 ++++++++++
drivers/net/wireless/ath/wil6210/netdev.c | 157 ++++
drivers/net/wireless/ath/wil6210/pcie_bus.c | 223 +++++
drivers/net/wireless/ath/wil6210/txrx.c | 892 ++++++++++++++++++++
drivers/net/wireless/ath/wil6210/txrx.h | 362 +++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 361 +++++++++
drivers/net/wireless/ath/wil6210/wmi.c | 989 +++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/wmi.h | 1116 ++++++++++++++++++++++++++
14 files changed, 6482 insertions(+)
create mode 100644 Documentation/networking/wil6210.txt
create mode 100644 drivers/net/wireless/ath/wil6210/Kconfig
create mode 100644 drivers/net/wireless/ath/wil6210/Makefile
create mode 100644 drivers/net/wireless/ath/wil6210/cfg80211.c
create mode 100644 drivers/net/wireless/ath/wil6210/debugfs.c
create mode 100644 drivers/net/wireless/ath/wil6210/interrupt.c
create mode 100644 drivers/net/wireless/ath/wil6210/main.c
create mode 100644 drivers/net/wireless/ath/wil6210/netdev.c
create mode 100644 drivers/net/wireless/ath/wil6210/pcie_bus.c
create mode 100644 drivers/net/wireless/ath/wil6210/txrx.c
create mode 100644 drivers/net/wireless/ath/wil6210/txrx.h
create mode 100644 drivers/net/wireless/ath/wil6210/wil6210.h
create mode 100644 drivers/net/wireless/ath/wil6210/wmi.c
create mode 100644 drivers/net/wireless/ath/wil6210/wmi.h
diff --git a/Documentation/networking/wil6210.txt b/Documentation/networking/wil6210.txt
new file mode 100644
index 0000000..24fcc51
--- /dev/null
+++ b/Documentation/networking/wil6210.txt
@@ -0,0 +1,292 @@
+Driver for wil6210 wireless network card.
+=========================================
+
+Copyright (c) 2012 Qualcomm Atheros, Inc.
+<[email protected]>
+
+Introduction
+============
+
+The wil6210 is 60GHz wireless card by Wilocity.
+It provides WiFi and wireless PCIE connectivity, as described in
+the WiGig WBE spec.
+
+This is PCIE device. It is combined with Atheros 2.4/5.2 GHz WiFi card.
+On the PCI, it is represented as the following hierarchy:
+
+1ae9:0101-+-1ae9:0201---168c:0034
+ +-1ae9:0201---1ae9:0301
+ +-1ae9:0201
+ \-1ae9:0201
+
+Chip consists of 1ae9:0101 is root bridge, with 4 ports 1ae9:0201.
+One port routed to separate Atheros card 168c:0034, it is handled by the
+ath9k driver.
+Another port connected to the wil6210 device 1ae9:0301, that is on chip.
+2 empty ports may be populated when connecting in WBE mode.
+
+wil6210 device, 1ae9:0301, has one 2Mb BAR.
+
+Network features
+================
+
+For the WiFi connection, it implements 802.11ad spec.
+Supported are channels 1..3 with corresponded frequencies
+58320, 60480, 62640 MHz.
+
+wil6210 use cfg80211 framework, but not mac80211.
+
+Modes supported are:
+
+- monitor
+- managed (station)
+- AP
+
+Driver designed in a way that hardware start running only when network
+interface brought up, with either 'ifconfig up' or starting AP. All settings
+made before are cached in the driver but not passed to the hardware.
+
+iw commands supported
+---------------------
+
+iw link: query link status. Report current MCS.
+
+Module parameters
+=================
+
+- rtap_include_phy_info
+ Include PHY info in the radiotap header, default - no (bool)
+- use_msi
+ Use MSI interrupt: 0 - don't, 1 - (default) - single, or 3 (int)
+- debug_fw
+ load driver if FW not ready. For FW debug (bool)
+
+wil6210 support set of interrupt handling modes:
+
+- INTx - legacy pin interrupt. Do not use if possible.
+- 1MSI - one MSI interrupt. This is the default mode.
+- 3MSI - 3 MSI interrupts for {Tx, Rx, Misc}.
+
+For interrupt handling mode, probed is highest one specified with @use_msi,
+with fallback:
+
+3MSI -> 1MSI -> INTx
+
+On the x86 platform, multiple MSI interrupts are not supported with recent
+kernel (3.7).
+
+When @debug_fw set to true, driver probe will not fail if firmware do not
+report "ready" event. This is to aid firmware boot issues debugging.
+
+Sniffer
+=======
+
+To configure wil6210 in sniffer mode (assume $WLAN set to network
+interface name):
+
+# iw $WLAN set type monitor
+
+Due to hardware/firmware deficiency, sniffer can capture either only
+control PHY (CP) or only data PHY (DP). To configure for desired PHY type
+do, after configuring for monitor mode:
+
+For CP:
+# iw $WLAN set monitor control
+For DP:
+# iw $WLAN set monitor none
+
+Finally, bring interface up:
+
+# ifconfig $WLAN up
+
+Examples for AP mode
+====================
+
+AP mode may be started using wpa_supplicant of hostapd. Use latest development
+snapshot of wpa_supplicant.
+
+For the wpa_supplicant, start AP in non-secure mode with config:
+
+---cut---
+ap_scan=2
+
+network={
+ frequency=60480
+ ssid="the_ssid_string"
+ mode=2
+ key_mgmt=NONE
+}
+---cut---
+
+To start secure AP, use config:
+
+---cut---
+ap_scan=2
+
+network={
+ frequency=60480
+ ssid="secure_ap"
+ psk="passphrase"
+ mode=2
+ key_mgmt=WPA-PSK
+ proto=RSN
+ pairwise=GCMP
+ group=GCMP
+}
+---cut---
+
+WMI commands
+============
+
+Control communication with the card is done through so called WMI commands
+and events. Target access to the mailbox within memory in BAR0 used.
+There are 2 similar mailbox structures: one for host->card commands, and one
+for card->host events.
+
+Tx/Rx
+=====
+
+DMA using 'vring' structures. Vring in consistent memory; hold descriptors
+that points to the data buffers. Card to write status back to the descriptor.
+
+There is one Rx vring. Tx vrings - multiple, per DA*TID.
+
+Debug facilities
+================
+
+Dynamic debug
+-------------
+
+Almost all messages printed to the dmesg, are "dynamic debug" ones.
+See Documentation/dynamic-debug-howto.txt for details.
+Module "wil6210" uses format prefixes to identify message groups:
+
+- "DBG[ IRQ]" for interrupt related messages. Prints every IRQ.
+- "DBG[TXRX]" for Tx/Rx path. Prints every Tx/Rx package.
+- "DBG[ WMI]" for WMI commands subsystem
+
+Groups IRQ and TXRX are heavy traffic; enable only when required.
+Group WMI is relatively low traffic, it prints only WMI messages.
+It is good idea to enable it when debugging.
+
+Debugfs
+-------
+
+All debugfs files placed under standard location for the cfg80211 devices,
+$DEBUGFS/ieee80211/$PHY/ where $PHY is phy name like 'phy1'.
+
+All wil6210 specific files placed under directory 'wil6210'.
+Facilities provided:
+
+- register access. All ICR (Interrupt Control Registers) groups represented as
+ directories, with entries per register, allowing read/write.
+ ITR (Interrupt Threshold Registers) represented as well.
+
+- raw memory access. All memory sections represented as 'blob' files, providing
+ read only access to the memory on card. Sections include:
+
++-------------------------------+---------------+
+| blob_xxx | BAR0 | Size | Comment |
+| file name | offset | | |
++-----------+---------+---------+---------------+
+| rgf | 0x0 | 0xa000 | Register file |
+| fw_code | 0x40000 | 0x40000 | FW code |
+| fw_data | 0x80000 | 0x8000 | FW data |
+| fw_peri | 0x88000 | 0x18000 | FW peripheral |
+| uc_code | 0xa0000 | 0x10000 | Ucode code |
+| uc_data | 0xb0000 | 0x4000 | Ucode data |
++-----------+---------+---------+---------------+
+
+Raw memory access used by firmware/ucode trace extractor. See below. Also,
+raw memory dump may be obtained for later analysis.
+
+- DWORD memory read, as FW see it. Files 'mem_addr' and 'mem_val' provide
+ access to the memory, using FW addresses (FW memory mapping is somewhat
+ different from what host see in BAR0). Write address to the 'mem_addr', then
+ read 'mem_val'. It will reads like "[0x%08x] = 0x%08x\n", addr, value
+
+- mailbox for WMI commands events. File 'mbox' reads like:
+
+ring tx = {
+ base = 0x008802e8
+ size = 0x0028 bytes -> 5 entries
+ tail = 0x00880300
+ head = 0x00880300
+ entry size = 1288
+ [ 0] E 0x00842490 -> 1fc9 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 1] E 0x00841f88 -> 1fca 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 2] E 0x00841a80 -> 1fcb 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 3] E th 0x00841578 -> 1fc7 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ [ 4] E 0x00841070 -> 1fc8 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+}
+ring rx = {
+ base = 0x00880318
+ size = 0x0040 bytes -> 8 entries
+ tail = 0x00880320
+ head = 0x00880320
+ entry size = 256
+ [ 0] E 0x00842f98 -> 24f8 000c 0000 00
+ : 00 00 0a 10 00 00 00 00 00 00 00 00
+ [ 1] E th 0x00000000 -> 2020 0f80 0000 c0
+ [ 2] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 3] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 4] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 5] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 6] E 0x00000000 -> 2020 0f80 0000 c0
+ [ 7] E 0x00000000 -> 2020 0f80 0000 c0
+}
+
+There are 2 separate rings, one for Tx, or host->card commands; and 2-nd
+for Rx, or card->host events.
+
+Printed for each ring (all addresses in FW memory mapping):
+ - base address of ring in card's memory
+ - ring size in bytes and entries
+ - tail and head pointers
+ - max. entry size. It is fake for Rx - FW may allocate entry of arbitrary size
+ - mailbox entries, format for entry:
+
+
+ /-- 'E' for empty entry, 'F' for full
+ | /+-- 't' for tail, 'h' for head
+ | ||
+ index | || address /-mbox header---\ [seq,len,type,flags]
+ v v vv v v v
+ [ 3] E th 0x00841578 -> 1fc7 001e 0000 00
+ : 00 00 07 00 00 00 00 00 ff ff 03 00 00 00 00 00
+ : 00 00 00 20 04 07 01 88 ff 02 00 00 01 00
+ \--buffer content (if valid)------------------/
+
+- Tx/Rx DMA Vrings. File 'vrings' reads as:
+
+VRING rx = {
+ pa = 0x00000000bb075000
+ va = 0xffff8800bb075000
+ size = 128
+ swtail = 127
+ swhead = 0
+ hwtail = [0x008813c8] -> 0x0000007f
+HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHS
+}
+
+There is one block for Rx DMA vring and one for every Tx DMA vring.
+
+Information printed:
+ - addresses, physical (pa) and virtual (va)
+ - size, entries
+ - software head and tail pointers
+ - hardware tail, format: [fw addr] -> value
+ - One letter per vring entry, 'H' for hardware owned and 'S'
+ for software owned ones.
+
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
new file mode 100644
index 0000000..209c00f
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -0,0 +1,30 @@
+config WIL6210
+ tristate "Wilocity 60g WiFi card wil6210 support"
+ depends on CFG80211
+ depends on PCI
+ default n
+ ---help---
+ This module adds support for wireless adapter based on
+ wil6210 chip by Wilocity. It supports operation on the
+ 60g band, covered by the IEEE802.11ad standard. See
+ Documentation/networking/wil6210.txt and
+ http://wireless.kernel.org/en/users/Drivers/wil6210
+ for more information.
+ If you choose to build it as a module, it will be called
+ wil6210
+
+config WIL6210_ISR_COR
+ bool "Use Clear-On-Read mode for ISR registers for wil6210"
+ depends on WIL6210
+ default y
+ ---help---
+ ISR registers on wil6210 chip may operate in either
+ COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode.
+ For production code, use COR (say y); is default since
+ it saves extra target transaction;
+ For ISR debug, use W1C (say n); is allows to monitor ISR
+ registers with debugfs. If COR were used, ISR would
+ self-clear when accessed for debug purposes, it makes
+ such monitoring impossible.
+ Say y unless you debug interrupts
+
diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
new file mode 100644
index 0000000..7713e4a
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_WIL6210) += wil6210.o
+
+wil6210-objs := main.o
+wil6210-objs += netdev.o
+wil6210-objs += cfg80211.o
+wil6210-objs += pcie_bus.o
+wil6210-objs += debugfs.o
+wil6210-objs += wmi.o
+wil6210-objs += interrupt.o
+wil6210-objs += txrx.o
+
+subdir-ccflags-y += -Werror
+subdir-ccflags-y += -D__CHECK_ENDIAN__
+
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
new file mode 100644
index 0000000..2d222b3
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -0,0 +1,565 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <net/cfg80211.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+
+#define CHAN60G(_channel, _flags) { \
+ .band = IEEE80211_BAND_60GHZ, \
+ .center_freq = 56160 + (2160 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 40, \
+}
+
+static struct ieee80211_channel wil_60ghz_channels[] = {
+ CHAN60G(1, 0),
+ CHAN60G(2, 0),
+ CHAN60G(3, 0),
+/* channel 4 not supported yet */
+};
+
+static struct ieee80211_supported_band wil_band_60ghz = {
+ .channels = wil_60ghz_channels,
+ .n_channels = ARRAY_SIZE(wil_60ghz_channels),
+ .ht_cap = {
+ .ht_supported = true,
+ .cap = 0, /* TODO */
+ .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, /* TODO */
+ .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, /* TODO */
+ .mcs = {
+ /* MCS 1..12 - SC PHY */
+ .rx_mask = {0xfe, 0x1f}, /* 1..12 */
+ .tx_params = IEEE80211_HT_MCS_TX_DEFINED, /* TODO */
+ },
+ },
+};
+
+static const struct ieee80211_txrx_stypes
+wil_mgmt_stypes[NUM_NL80211_IFTYPES] = {
+ [NL80211_IFTYPE_STATION] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_AP] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_P2P_CLIENT] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+ [NL80211_IFTYPE_P2P_GO] = {
+ .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ },
+};
+
+static const u32 wil_cipher_suites[] = {
+ WLAN_CIPHER_SUITE_GCMP,
+};
+
+int wil_iftype_nl2wmi(enum nl80211_iftype type)
+{
+ static const struct {
+ enum nl80211_iftype nl;
+ enum wmi_network_type wmi;
+ } __nl2wmi[] = {
+ {NL80211_IFTYPE_ADHOC, WMI_NETTYPE_ADHOC},
+ {NL80211_IFTYPE_STATION, WMI_NETTYPE_INFRA},
+ {NL80211_IFTYPE_AP, WMI_NETTYPE_AP},
+ {NL80211_IFTYPE_P2P_CLIENT, WMI_NETTYPE_P2P},
+ {NL80211_IFTYPE_P2P_GO, WMI_NETTYPE_P2P},
+ {NL80211_IFTYPE_MONITOR, WMI_NETTYPE_ADHOC}, /* FIXME */
+ };
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(__nl2wmi); i++) {
+ if (__nl2wmi[i].nl == type)
+ return __nl2wmi[i].wmi;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int wil_cfg80211_get_station(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 *mac, struct station_info *sinfo)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ int rc;
+ struct wmi_notify_req_cmd cmd = {
+ .cid = 0,
+ .interval_usec = 0,
+ };
+
+ if (memcmp(mac, wil->dst_addr[0], ETH_ALEN))
+ return -ENOENT;
+
+ /* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
+ rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
+ WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
+ if (rc)
+ return rc;
+
+ sinfo->generation = wil->sinfo_gen;
+
+ sinfo->filled |= STATION_INFO_TX_BITRATE;
+ sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
+ sinfo->txrate.mcs = wil->stats.bf_mcs;
+ sinfo->filled |= STATION_INFO_RX_BITRATE;
+ sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
+ sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
+
+ if (test_bit(wil_status_fwconnected, &wil->status)) {
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = 12; /* TODO: provide real value */
+ }
+
+ return 0;
+}
+
+static int wil_cfg80211_change_iface(struct wiphy *wiphy,
+ struct net_device *ndev,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+
+ switch (type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ case NL80211_IFTYPE_P2P_GO:
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ if (flags)
+ wil->monitor_flags = *flags;
+ else
+ wil->monitor_flags = 0;
+
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ wdev->iftype = type;
+
+ return 0;
+}
+
+static int wil_cfg80211_scan(struct wiphy *wiphy,
+ struct cfg80211_scan_request *request)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+ struct {
+ struct wmi_start_scan_cmd cmd;
+ u16 chnl[4];
+ } __packed cmd;
+ uint i, n;
+
+ if (wil->scan_request) {
+ wil_err(wil, "Already scanning\n");
+ return -EAGAIN;
+ }
+
+ /* check we are client side */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ break;
+ default:
+ return -EOPNOTSUPP;
+
+ }
+
+ /* FW don't support scan after connection attempt */
+ if (test_bit(wil_status_dontscan, &wil->status)) {
+ wil_err(wil, "Scan after connect attempt not supported\n");
+ return -EBUSY;
+ }
+
+ wil->scan_request = request;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd.num_channels = 0;
+ n = min(request->n_channels, 4U);
+ for (i = 0; i < n; i++) {
+ int ch = request->channels[i]->hw_value;
+ if (ch == 0) {
+ wil_err(wil,
+ "Scan requested for unknown frequency %dMhz\n",
+ request->channels[i]->center_freq);
+ continue;
+ }
+ /* 0-based channel indexes */
+ cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1;
+ wil_dbg(wil, "Scan for ch %d : %d MHz\n", ch,
+ request->channels[i]->center_freq);
+ }
+
+ return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
+ cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
+}
+
+static int wil_cfg80211_connect(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_connect_params *sme)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+ struct cfg80211_bss *bss;
+ struct wmi_connect_cmd conn;
+ const u8 *ssid_eid;
+ const u8 *rsn_eid;
+ int ch;
+ int rc = 0;
+
+ bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
+ sme->ssid, sme->ssid_len,
+ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+ if (!bss) {
+ wil_err(wil, "Unable to find BSS\n");
+ return -ENOENT;
+ }
+
+ ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
+ if (!ssid_eid) {
+ wil_err(wil, "No SSID\n");
+ rc = -ENOENT;
+ goto out;
+ }
+
+ rsn_eid = sme->ie ?
+ cfg80211_find_ie(WLAN_EID_RSN, sme->ie, sme->ie_len) :
+ NULL;
+ if (rsn_eid) {
+ if (sme->ie_len > WMI_MAX_IE_LEN) {
+ rc = -ERANGE;
+ wil_err(wil, "IE too large (%td bytes)\n",
+ sme->ie_len);
+ goto out;
+ }
+ /*
+ * For secure assoc, send:
+ * (1) WMI_DELETE_CIPHER_KEY_CMD
+ * (2) WMI_SET_APPIE_CMD
+ */
+ rc = wmi_del_cipher_key(wil, 0, bss->bssid);
+ if (rc) {
+ wil_err(wil, "WMI_DELETE_CIPHER_KEY_CMD failed\n");
+ goto out;
+ }
+ /* WMI_SET_APPIE_CMD */
+ rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie);
+ if (rc) {
+ wil_err(wil, "WMI_SET_APPIE_CMD failed\n");
+ goto out;
+ }
+ }
+
+ /* WMI_CONNECT_CMD */
+ memset(&conn, 0, sizeof(conn));
+ conn.network_type = wil_iftype_nl2wmi(wdev->iftype);
+ /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
+ conn.network_type = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
+ if (rsn_eid) {
+ conn.dot11_auth_mode = WMI_AUTH11_SHARED;
+ conn.auth_mode = WMI_AUTH_WPA2_PSK;
+ conn.pairwise_crypto_type = WMI_CRYPT_AES_GCMP;
+ conn.pairwise_crypto_len = 16;
+ } else {
+ conn.dot11_auth_mode = WMI_AUTH11_OPEN;
+ conn.auth_mode = WMI_AUTH_NONE;
+ }
+
+ conn.ssid_len = min_t(u8, ssid_eid[1], 32);
+ memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
+
+ ch = bss->channel->hw_value;
+ if (ch == 0) {
+ wil_err(wil, "BSS at unknown frequency %dMhz\n",
+ bss->channel->center_freq);
+ rc = -EOPNOTSUPP;
+ goto out;
+ }
+ conn.channel = ch - 1;
+
+ memcpy(conn.bssid, bss->bssid, 6);
+ memcpy(conn.dst_mac, bss->bssid, 6);
+ /*
+ * FW don't support scan after connection attempt
+ */
+ set_bit(wil_status_dontscan, &wil->status);
+
+ rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
+ if (rc == 0) {
+ /* Connect can take lots of time */
+ mod_timer(&wil->connect_timer,
+ jiffies + msecs_to_jiffies(2000));
+ }
+
+ out:
+ cfg80211_put_bss(bss);
+
+ return rc;
+}
+
+static int wil_cfg80211_disconnect(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u16 reason_code)
+{
+ int rc;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
+
+ return rc;
+}
+
+static int wil_cfg80211_set_channel(struct wiphy *wiphy,
+ struct cfg80211_chan_def *chandef)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wdev->preset_chandef = *chandef;
+
+ return 0;
+}
+
+static int wil_cfg80211_add_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool pairwise,
+ const u8 *mac_addr,
+ struct key_params *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ /* group key is not used */
+ if (!pairwise)
+ return 0;
+
+ return wmi_add_cipher_key(wil, key_index, mac_addr,
+ params->key_len, params->key);
+}
+
+static int wil_cfg80211_del_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool pairwise,
+ const u8 *mac_addr)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ /* group key is not used */
+ if (!pairwise)
+ return 0;
+
+ return wmi_del_cipher_key(wil, key_index, mac_addr);
+}
+
+/* Need to be present or wiphy_new() will WARN */
+static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index, bool unicast,
+ bool multicast)
+{
+ return 0;
+}
+
+static int wil_cfg80211_start_ap(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_ap_settings *info)
+{
+ int rc = 0;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ struct ieee80211_channel *channel = info->chandef.chan;
+ struct cfg80211_beacon_data *bcon = &info->beacon;
+ u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ if (!channel) {
+ wil_err(wil, "AP: No channel???\n");
+ return -EINVAL;
+ }
+
+ wil_dbg(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
+ channel->center_freq, info->privacy ? "secure" : "open");
+ print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
+ info->ssid, info->ssid_len);
+
+ rc = wil_reset(wil);
+ if (rc)
+ return rc;
+
+ rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
+ if (rc)
+ return rc;
+
+ rc = wmi_set_channel(wil, channel->hw_value);
+ if (rc)
+ return rc;
+
+ /* MAC address - pre-requisite for other commands */
+ wmi_set_mac_address(wil, ndev->dev_addr);
+
+ /* IE's */
+ /* bcon 'head IE's are not relevant for 60g band */
+ wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
+ bcon->beacon_ies);
+ wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
+ bcon->proberesp_ies);
+ wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
+ bcon->assocresp_ies);
+
+ wil->secure_pcp = info->privacy;
+
+ rc = wmi_set_bcon(wil, info->beacon_interval, wmi_nettype);
+ if (rc)
+ return rc;
+
+ /* Rx VRING. After MAC and beacon */
+ rc = wil_rx_init(wil);
+
+ netif_carrier_on(ndev);
+
+ return rc;
+}
+
+static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
+ struct net_device *ndev)
+{
+ int rc = 0;
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ /* To stop beaconing, set BI to 0 */
+ rc = wmi_set_bcon(wil, 0, wmi_nettype);
+
+ return rc;
+}
+
+static struct cfg80211_ops wil_cfg80211_ops = {
+ .scan = wil_cfg80211_scan,
+ .connect = wil_cfg80211_connect,
+ .disconnect = wil_cfg80211_disconnect,
+ .change_virtual_intf = wil_cfg80211_change_iface,
+ .get_station = wil_cfg80211_get_station,
+ .set_monitor_channel = wil_cfg80211_set_channel,
+ .add_key = wil_cfg80211_add_key,
+ .del_key = wil_cfg80211_del_key,
+ .set_default_key = wil_cfg80211_set_default_key,
+ /* AP mode */
+ .start_ap = wil_cfg80211_start_ap,
+ .stop_ap = wil_cfg80211_stop_ap,
+};
+
+static void wil_wiphy_init(struct wiphy *wiphy)
+{
+ /* TODO: set real value */
+ wiphy->max_scan_ssids = 10;
+ wiphy->max_num_pmkids = 0 /* TODO: */;
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MONITOR);
+ /* TODO: enable P2P when integrated with supplicant:
+ * BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO)
+ */
+ wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
+ WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+ dev_warn(wiphy_dev(wiphy), "%s : flags = 0x%08x\n",
+ __func__, wiphy->flags);
+ wiphy->probe_resp_offload =
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+
+ wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz;
+
+ /* TODO: figure this out */
+ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+ wiphy->cipher_suites = wil_cipher_suites;
+ wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
+ wiphy->mgmt_stypes = wil_mgmt_stypes;
+}
+
+struct wireless_dev *wil_cfg80211_init(struct device *dev)
+{
+ int rc = 0;
+ struct wireless_dev *wdev;
+
+ wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+ if (!wdev)
+ return ERR_PTR(-ENOMEM);
+
+ wdev->wiphy = wiphy_new(&wil_cfg80211_ops,
+ sizeof(struct wil6210_priv));
+ if (!wdev->wiphy) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ set_wiphy_dev(wdev->wiphy, dev);
+ wil_wiphy_init(wdev->wiphy);
+
+ rc = wiphy_register(wdev->wiphy);
+ if (rc < 0)
+ goto out_failed_reg;
+
+ return wdev;
+
+out_failed_reg:
+ wiphy_free(wdev->wiphy);
+out:
+ kfree(wdev);
+
+ return ERR_PTR(rc);
+}
+
+void wil_wdev_free(struct wil6210_priv *wil)
+{
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+
+ if (!wdev)
+ return;
+
+ wiphy_unregister(wdev->wiphy);
+ wiphy_free(wdev->wiphy);
+ kfree(wdev);
+}
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
new file mode 100644
index 0000000..65fc968
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -0,0 +1,603 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pci.h>
+#include <linux/rtnetlink.h>
+
+#include "wil6210.h"
+#include "txrx.h"
+
+/* Nasty hack. Better have per device instances */
+static u32 mem_addr;
+static u32 dbg_txdesc_index;
+
+static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
+ const char *name, struct vring *vring)
+{
+ void __iomem *x = wmi_addr(wil, vring->hwtail);
+
+ seq_printf(s, "VRING %s = {\n", name);
+ seq_printf(s, " pa = 0x%016llx\n", (unsigned long long)vring->pa);
+ seq_printf(s, " va = 0x%p\n", vring->va);
+ seq_printf(s, " size = %d\n", vring->size);
+ seq_printf(s, " swtail = %d\n", vring->swtail);
+ seq_printf(s, " swhead = %d\n", vring->swhead);
+ seq_printf(s, " hwtail = [0x%08x] -> ", vring->hwtail);
+ if (x)
+ seq_printf(s, "0x%08x\n", ioread32(x));
+ else
+ seq_printf(s, "???\n");
+
+ if (vring->va && (vring->size < 1025)) {
+ uint i;
+ for (i = 0; i < vring->size; i++) {
+ volatile struct vring_tx_desc *d = &vring->va[i].tx;
+ if ((i % 64) == 0 && (i != 0))
+ seq_printf(s, "\n");
+ seq_printf(s, "%s", (d->dma.status & BIT(0)) ?
+ "S" : (vring->ctx[i] ? "H" : "h"));
+ }
+ seq_printf(s, "\n");
+ }
+ seq_printf(s, "}\n");
+}
+
+static int wil_vring_debugfs_show(struct seq_file *s, void *data)
+{
+ uint i;
+ struct wil6210_priv *wil = s->private;
+
+ wil_print_vring(s, wil, "rx", &wil->vring_rx);
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+ struct vring *vring = &(wil->vring_tx[i]);
+ if (vring->va) {
+ char name[10];
+ snprintf(name, sizeof(name), "tx_%2d", i);
+ wil_print_vring(s, wil, name, vring);
+ }
+ }
+
+ return 0;
+}
+
+static int wil_vring_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_vring_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_vring = {
+ .open = wil_vring_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static void wil_print_ring(struct seq_file *s, const char *prefix,
+ void __iomem *off)
+{
+ struct wil6210_priv *wil = s->private;
+ struct wil6210_mbox_ring r;
+ int rsize;
+ uint i;
+
+ wil_memcpy_fromio_32(&r, off, sizeof(r));
+ wil_mbox_ring_le2cpus(&r);
+ /*
+ * we just read memory block from NIC. This memory may be
+ * garbage. Check validity before using it.
+ */
+ rsize = r.size / sizeof(struct wil6210_mbox_ring_desc);
+
+ seq_printf(s, "ring %s = {\n", prefix);
+ seq_printf(s, " base = 0x%08x\n", r.base);
+ seq_printf(s, " size = 0x%04x bytes -> %d entries\n", r.size, rsize);
+ seq_printf(s, " tail = 0x%08x\n", r.tail);
+ seq_printf(s, " head = 0x%08x\n", r.head);
+ seq_printf(s, " entry size = %d\n", r.entry_size);
+
+ if (r.size % sizeof(struct wil6210_mbox_ring_desc)) {
+ seq_printf(s, " ??? size is not multiple of %zd, garbage?\n",
+ sizeof(struct wil6210_mbox_ring_desc));
+ goto out;
+ }
+
+ if (!wmi_addr(wil, r.base) ||
+ !wmi_addr(wil, r.tail) ||
+ !wmi_addr(wil, r.head)) {
+ seq_printf(s, " ??? pointers are garbage?\n");
+ goto out;
+ }
+
+ for (i = 0; i < rsize; i++) {
+ struct wil6210_mbox_ring_desc d;
+ struct wil6210_mbox_hdr hdr;
+ size_t delta = i * sizeof(d);
+ void __iomem *x = wil->csr + HOSTADDR(r.base) + delta;
+
+ wil_memcpy_fromio_32(&d, x, sizeof(d));
+
+ seq_printf(s, " [%2x] %s %s%s 0x%08x", i,
+ d.sync ? "F" : "E",
+ (r.tail - r.base == delta) ? "t" : " ",
+ (r.head - r.base == delta) ? "h" : " ",
+ le32_to_cpu(d.addr));
+ if (0 == wmi_read_hdr(wil, d.addr, &hdr)) {
+ u16 len = le16_to_cpu(hdr.len);
+ seq_printf(s, " -> %04x %04x %04x %02x\n",
+ le16_to_cpu(hdr.seq), len,
+ le16_to_cpu(hdr.type), hdr.flags);
+ if (len <= MAX_MBOXITEM_SIZE) {
+ int n = 0;
+ unsigned char printbuf[16 * 3 + 2];
+ unsigned char databuf[MAX_MBOXITEM_SIZE];
+ void __iomem *src = wmi_buffer(wil, d.addr) +
+ sizeof(struct wil6210_mbox_hdr);
+ /*
+ * No need to check @src for validity -
+ * we already validated @d.addr while
+ * reading header
+ */
+ wil_memcpy_fromio_32(databuf, src, len);
+ while (n < len) {
+ int l = min(len - n, 16);
+ hex_dump_to_buffer(databuf + n, l,
+ 16, 1, printbuf,
+ sizeof(printbuf),
+ false);
+ seq_printf(s, " : %s\n", printbuf);
+ n += l;
+ }
+ }
+ } else {
+ seq_printf(s, "\n");
+ }
+ }
+ out:
+ seq_printf(s, "}\n");
+}
+
+static int wil_mbox_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+
+ wil_print_ring(s, "tx", wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx));
+ wil_print_ring(s, "rx", wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx));
+
+ return 0;
+}
+
+static int wil_mbox_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_mbox_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_mbox = {
+ .open = wil_mbox_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static int wil_debugfs_iomem_x32_set(void *data, u64 val)
+{
+ iowrite32(val, (void __iomem *)data);
+ wmb(); /* make sure write propagated to HW */
+
+ return 0;
+}
+
+static int wil_debugfs_iomem_x32_get(void *data, u64 *val)
+{
+ *val = ioread32((void __iomem *)data);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_iomem_x32, wil_debugfs_iomem_x32_get,
+ wil_debugfs_iomem_x32_set, "0x%08llx\n");
+
+static struct dentry *wil_debugfs_create_iomem_x32(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ void __iomem *value)
+{
+ return debugfs_create_file(name, mode, parent, (void * __force)value,
+ &fops_iomem_x32);
+}
+
+static int wil6210_debugfs_create_ISR(struct wil6210_priv *wil,
+ const char *name,
+ struct dentry *parent, u32 off)
+{
+ struct dentry *d = debugfs_create_dir(name, parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("ICC", S_IRUGO | S_IWUSR, d,
+ wil->csr + off);
+ wil_debugfs_create_iomem_x32("ICR", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 4);
+ wil_debugfs_create_iomem_x32("ICM", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 8);
+ wil_debugfs_create_iomem_x32("ICS", S_IWUSR, d,
+ wil->csr + off + 12);
+ wil_debugfs_create_iomem_x32("IMV", S_IRUGO | S_IWUSR, d,
+ wil->csr + off + 16);
+ wil_debugfs_create_iomem_x32("IMS", S_IWUSR, d,
+ wil->csr + off + 20);
+ wil_debugfs_create_iomem_x32("IMC", S_IWUSR, d,
+ wil->csr + off + 24);
+
+ return 0;
+}
+
+static int wil6210_debugfs_create_pseudo_ISR(struct wil6210_priv *wil,
+ struct dentry *parent)
+{
+ struct dentry *d = debugfs_create_dir("PSEUDO_ISR", parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("CAUSE", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE));
+ wil_debugfs_create_iomem_x32("MASK_SW", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+ wil_debugfs_create_iomem_x32("MASK_FW", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_FW));
+
+ return 0;
+}
+
+static int wil6210_debugfs_create_ITR_CNT(struct wil6210_priv *wil,
+ struct dentry *parent)
+{
+ struct dentry *d = debugfs_create_dir("ITR_CNT", parent);
+
+ if (IS_ERR_OR_NULL(d))
+ return -ENODEV;
+
+ wil_debugfs_create_iomem_x32("TRSH", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_TRSH));
+ wil_debugfs_create_iomem_x32("DATA", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_DATA));
+ wil_debugfs_create_iomem_x32("CTL", S_IRUGO, d, wil->csr +
+ HOSTADDR(RGF_DMA_ITR_CNT_CRL));
+
+ return 0;
+}
+
+static int wil_memread_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ void __iomem *a = wmi_buffer(wil, cpu_to_le32(mem_addr));
+
+ if (a)
+ seq_printf(s, "[0x%08x] = 0x%08x\n", mem_addr, ioread32(a));
+ else
+ seq_printf(s, "[0x%08x] = INVALID\n", mem_addr);
+
+ return 0;
+}
+
+static int wil_memread_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_memread_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_memread = {
+ .open = wil_memread_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+static int wil_default_open(struct inode *inode, struct file *file)
+{
+ if (inode->i_private)
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ enum { max_count = 4096 };
+ struct debugfs_blob_wrapper *blob = file->private_data;
+ loff_t pos = *ppos;
+ size_t available = blob->size;
+ void *buf;
+ size_t ret;
+
+ if (pos < 0)
+ return -EINVAL;
+
+ if (pos >= available || !count)
+ return 0;
+
+ if (count > available - pos)
+ count = available - pos;
+ if (count > max_count)
+ count = max_count;
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ wil_memcpy_fromio_32(buf, (const volatile void __iomem *)blob->data +
+ pos, count);
+
+ ret = copy_to_user(user_buf, buf, count);
+ kfree(buf);
+ if (ret == count)
+ return -EFAULT;
+
+ count -= ret;
+ *ppos = pos + count;
+
+ return count;
+}
+
+static const struct file_operations fops_ioblob = {
+ .read = wil_read_file_ioblob,
+ .open = wil_default_open,
+ .llseek = default_llseek,
+};
+
+static
+struct dentry *wil_debugfs_create_ioblob(const char *name,
+ mode_t mode,
+ struct dentry *parent,
+ struct debugfs_blob_wrapper *blob)
+{
+ return debugfs_create_file(name, mode, parent, blob, &fops_ioblob);
+}
+/*---reset---*/
+static ssize_t wil_write_file_reset(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ /**
+ * BUG:
+ * this code does NOT sync device state with the rest of system
+ * use with care, debug only!!!
+ */
+ rtnl_lock();
+ dev_close(ndev);
+ ndev->flags &= ~IFF_UP;
+ rtnl_unlock();
+ wil_reset(wil);
+
+ return len;
+}
+
+static const struct file_operations fops_reset = {
+ .write = wil_write_file_reset,
+ .open = wil_default_open,
+};
+/*---------Tx descriptor------------*/
+
+static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ struct vring *vring = &(wil->vring_tx[0]);
+
+ if (!vring->va) {
+ seq_printf(s, "No Tx VRING\n");
+ return 0;
+ }
+
+ if (dbg_txdesc_index < vring->size) {
+ volatile struct vring_tx_desc *d =
+ &(vring->va[dbg_txdesc_index].tx);
+ volatile u32 *u = (volatile u32 *)d;
+ struct sk_buff *skb = vring->ctx[dbg_txdesc_index];
+
+ seq_printf(s, "Tx[%3d] = {\n", dbg_txdesc_index);
+ seq_printf(s, " MAC = 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ u[0], u[1], u[2], u[3]);
+ seq_printf(s, " DMA = 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ u[4], u[5], u[6], u[7]);
+ seq_printf(s, " SKB = %p\n", skb);
+
+ if (skb) {
+ unsigned char printbuf[16 * 3 + 2];
+ int i = 0;
+ int len = skb_headlen(skb);
+ void *p = skb->data;
+
+ seq_printf(s, " len = %d\n", len);
+
+ while (i < len) {
+ int l = min(len - i, 16);
+ hex_dump_to_buffer(p + i, l, 16, 1, printbuf,
+ sizeof(printbuf), false);
+ seq_printf(s, " : %s\n", printbuf);
+ i += l;
+ }
+ }
+ seq_printf(s, "}\n");
+ } else {
+ seq_printf(s, "TxDesc index (%d) >= size (%d)\n",
+ dbg_txdesc_index, vring->size);
+ }
+
+ return 0;
+}
+
+static int wil_txdesc_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_txdesc_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_txdesc = {
+ .open = wil_txdesc_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+/*---------beamforming------------*/
+static int wil_bf_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ seq_printf(s,
+ "TSF : 0x%016llx\n"
+ "TxMCS : %d\n"
+ "Sectors(rx:tx) my %2d:%2d peer %2d:%2d\n",
+ wil->stats.tsf, wil->stats.bf_mcs,
+ wil->stats.my_rx_sector, wil->stats.my_tx_sector,
+ wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
+ return 0;
+}
+
+static int wil_bf_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_bf_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_bf = {
+ .open = wil_bf_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+/*---------SSID------------*/
+static ssize_t wil_read_file_ssid(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+
+ return simple_read_from_buffer(user_buf, count, ppos,
+ wdev->ssid, wdev->ssid_len);
+}
+
+static ssize_t wil_write_file_ssid(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct wil6210_priv *wil = file->private_data;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ if (*ppos != 0) {
+ wil_err(wil, "Unable to set SSID substring from [%d]\n",
+ (int)*ppos);
+ return -EINVAL;
+ }
+
+ if (count > sizeof(wdev->ssid)) {
+ wil_err(wil, "SSID too long, len = %d\n", (int)count);
+ return -EINVAL;
+ }
+ if (netif_running(ndev)) {
+ wil_err(wil, "Unable to change SSID on running interface\n");
+ return -EINVAL;
+ }
+
+ wdev->ssid_len = count;
+ return simple_write_to_buffer(wdev->ssid, wdev->ssid_len, ppos,
+ buf, count);
+}
+
+static const struct file_operations fops_ssid = {
+ .read = wil_read_file_ssid,
+ .write = wil_write_file_ssid,
+ .open = wil_default_open,
+};
+
+/*----------------*/
+int wil6210_debugfs_init(struct wil6210_priv *wil)
+{
+ struct dentry *dbg = wil->debug = debugfs_create_dir(WIL_NAME,
+ wil_to_wiphy(wil)->debugfsdir);
+
+ if (IS_ERR_OR_NULL(dbg))
+ return -ENODEV;
+
+ debugfs_create_file("mbox", S_IRUGO, dbg, wil, &fops_mbox);
+ debugfs_create_file("vrings", S_IRUGO, dbg, wil, &fops_vring);
+ debugfs_create_file("txdesc", S_IRUGO, dbg, wil, &fops_txdesc);
+ debugfs_create_u32("txdesc_index", S_IRUGO | S_IWUSR, dbg,
+ &dbg_txdesc_index);
+ debugfs_create_file("bf", S_IRUGO, dbg, wil, &fops_bf);
+ debugfs_create_file("ssid", S_IRUGO | S_IWUSR, dbg, wil, &fops_ssid);
+ debugfs_create_u32("secure_pcp", S_IRUGO | S_IWUSR, dbg,
+ &wil->secure_pcp);
+
+ wil6210_debugfs_create_ISR(wil, "USER_ICR", dbg,
+ HOSTADDR(RGF_USER_USER_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_TX_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_TX_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_RX_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_RX_ICR));
+ wil6210_debugfs_create_ISR(wil, "DMA_EP_MISC_ICR", dbg,
+ HOSTADDR(RGF_DMA_EP_MISC_ICR));
+ wil6210_debugfs_create_pseudo_ISR(wil, dbg);
+ wil6210_debugfs_create_ITR_CNT(wil, dbg);
+
+ debugfs_create_u32("mem_addr", S_IRUGO | S_IWUSR, dbg, &mem_addr);
+ debugfs_create_file("mem_val", S_IRUGO, dbg, wil, &fops_memread);
+
+ debugfs_create_file("reset", S_IWUSR, dbg, wil, &fops_reset);
+
+ wil->rgf_blob.data = (void * __force)wil->csr + 0;
+ wil->rgf_blob.size = 0xa000;
+ wil_debugfs_create_ioblob("blob_rgf", S_IRUGO, dbg, &wil->rgf_blob);
+
+ wil->fw_code_blob.data = (void * __force)wil->csr + 0x40000;
+ wil->fw_code_blob.size = 0x40000;
+ wil_debugfs_create_ioblob("blob_fw_code", S_IRUGO, dbg,
+ &wil->fw_code_blob);
+
+ wil->fw_data_blob.data = (void * __force)wil->csr + 0x80000;
+ wil->fw_data_blob.size = 0x8000;
+ wil_debugfs_create_ioblob("blob_fw_data", S_IRUGO, dbg,
+ &wil->fw_data_blob);
+
+ wil->fw_peri_blob.data = (void * __force)wil->csr + 0x88000;
+ wil->fw_peri_blob.size = 0x18000;
+ wil_debugfs_create_ioblob("blob_fw_peri", S_IRUGO, dbg,
+ &wil->fw_peri_blob);
+
+ wil->uc_code_blob.data = (void * __force)wil->csr + 0xa0000;
+ wil->uc_code_blob.size = 0x10000;
+ wil_debugfs_create_ioblob("blob_uc_code", S_IRUGO, dbg,
+ &wil->uc_code_blob);
+
+ wil->uc_data_blob.data = (void * __force)wil->csr + 0xb0000;
+ wil->uc_data_blob.size = 0x4000;
+ wil_debugfs_create_ioblob("blob_uc_data", S_IRUGO, dbg,
+ &wil->uc_data_blob);
+
+ return 0;
+}
+
+void wil6210_debugfs_remove(struct wil6210_priv *wil)
+{
+ debugfs_remove_recursive(wil->debug);
+ wil->debug = NULL;
+}
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
new file mode 100644
index 0000000..38049da
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -0,0 +1,471 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/interrupt.h>
+
+#include "wil6210.h"
+
+/**
+ * Theory of operation:
+ *
+ * There is ISR pseudo-cause register,
+ * dma_rgf->DMA_RGF.PSEUDO_CAUSE.PSEUDO_CAUSE
+ * Its bits represents OR'ed bits from 3 real ISR registers:
+ * TX, RX, and MISC.
+ *
+ * Registers may be configured to either "write 1 to clear" or
+ * "clear on read" mode
+ *
+ * When handling interrupt, one have to mask/unmask interrupts for the
+ * real ISR registers, or hardware may malfunction.
+ *
+ */
+
+#define WIL6210_IRQ_DISABLE (0xFFFFFFFFUL)
+#define WIL6210_IMC_RX BIT_DMA_EP_RX_ICR_RX_DONE
+#define WIL6210_IMC_TX (BIT_DMA_EP_TX_ICR_TX_DONE | \
+ BIT_DMA_EP_TX_ICR_TX_DONE_N(0))
+#define WIL6210_IMC_MISC (ISR_MISC_FW_READY | ISR_MISC_MBOX_EVT)
+
+#define WIL6210_IRQ_PSEUDO_MASK (u32)(~(BIT_DMA_PSEUDO_CAUSE_RX | \
+ BIT_DMA_PSEUDO_CAUSE_TX | \
+ BIT_DMA_PSEUDO_CAUSE_MISC))
+
+#if defined(CONFIG_WIL6210_ISR_COR)
+/* configure to Clear-On-Read mode */
+#define WIL_ICR_ICC_VALUE (0xFFFFFFFFUL)
+
+static inline void wil_icr_clear(u32 x, void __iomem *addr)
+{
+
+}
+#else /* defined(CONFIG_WIL6210_ISR_COR) */
+/* configure to Write-1-to-Clear mode */
+#define WIL_ICR_ICC_VALUE (0UL)
+
+static inline void wil_icr_clear(u32 x, void __iomem *addr)
+{
+ iowrite32(x, addr);
+}
+#endif /* defined(CONFIG_WIL6210_ISR_COR) */
+
+static inline u32 wil_ioread32_and_clear(void __iomem *addr)
+{
+ u32 x = ioread32(addr);
+
+ wil_icr_clear(x, addr);
+
+ return x;
+}
+
+static void wil6210_mask_irq_tx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_rx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_misc(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMS));
+}
+
+static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+
+ clear_bit(wil_status_irqen, &wil->status);
+}
+
+static void wil6210_unmask_irq_tx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_TX, wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_rx(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_RX, wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_misc(struct wil6210_priv *wil)
+{
+ iowrite32(WIL6210_IMC_MISC, wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMC));
+}
+
+static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ set_bit(wil_status_irqen, &wil->status);
+
+ iowrite32(WIL6210_IRQ_PSEUDO_MASK, wil->csr +
+ HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
+}
+
+void wil6210_disable_irq(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ wil6210_mask_irq_tx(wil);
+ wil6210_mask_irq_rx(wil);
+ wil6210_mask_irq_misc(wil);
+ wil6210_mask_irq_pseudo(wil);
+}
+
+void wil6210_enable_irq(struct wil6210_priv *wil)
+{
+ wil_dbg_IRQ(wil, "%s()\n", __func__);
+
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+ iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICC));
+
+ wil6210_unmask_irq_pseudo(wil);
+ wil6210_unmask_irq_tx(wil);
+ wil6210_unmask_irq_rx(wil);
+ wil6210_unmask_irq_misc(wil);
+}
+
+static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR RX 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: RX\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_rx(wil);
+
+ if (isr & BIT_DMA_EP_RX_ICR_RX_DONE) {
+ wil_dbg_IRQ(wil, "RX done\n");
+ isr &= ~BIT_DMA_EP_RX_ICR_RX_DONE;
+ wil_rx_handle(wil);
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled RX ISR bits 0x%08x\n", isr);
+
+ wil6210_unmask_irq_rx(wil);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR TX 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: TX\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_tx(wil);
+
+ if (isr & BIT_DMA_EP_TX_ICR_TX_DONE) {
+ uint i;
+ wil_dbg_IRQ(wil, "TX done\n");
+ isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
+ for (i = 0; i < 24; i++) {
+ u32 mask = BIT_DMA_EP_TX_ICR_TX_DONE_N(i);
+ if (isr & mask) {
+ isr &= ~mask;
+ wil_dbg_IRQ(wil, "TX done(%i)\n", i);
+ wil_tx_complete(wil, i);
+ }
+ }
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled TX ISR bits 0x%08x\n", isr);
+
+ wil6210_unmask_irq_tx(wil);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+
+ wil_dbg_IRQ(wil, "ISR MISC 0x%08x\n", isr);
+
+ if (!isr) {
+ wil_err(wil, "spurious IRQ: MISC\n");
+ return IRQ_NONE;
+ }
+
+ wil6210_mask_irq_misc(wil);
+
+ if (isr & ISR_MISC_FW_READY) {
+ wil_dbg_IRQ(wil, "IRQ: FW ready\n");
+ /**
+ * Actual FW ready indicated by the
+ * WMI_FW_READY_EVENTID
+ */
+ isr &= ~ISR_MISC_FW_READY;
+ }
+
+ wil->isr_misc = isr;
+
+ if (isr) {
+ return IRQ_WAKE_THREAD;
+ } else {
+ wil6210_unmask_irq_misc(wil);
+ return IRQ_HANDLED;
+ }
+}
+
+static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+ u32 isr = wil->isr_misc;
+
+ wil_dbg_IRQ(wil, "Thread ISR MISC 0x%08x\n", isr);
+
+ if (isr & ISR_MISC_MBOX_EVT) {
+ wil_dbg_IRQ(wil, "MBOX event\n");
+ wmi_recv_cmd(wil);
+ isr &= ~ISR_MISC_MBOX_EVT;
+ }
+
+ if (isr)
+ wil_err(wil, "un-handled MISC ISR bits 0x%08x\n", isr);
+
+ wil->isr_misc = 0;
+
+ wil6210_unmask_irq_misc(wil);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * thread IRQ handler
+ */
+static irqreturn_t wil6210_thread_irq(int irq, void *cookie)
+{
+ struct wil6210_priv *wil = cookie;
+
+ wil_dbg_IRQ(wil, "Thread IRQ\n");
+ /* Discover real IRQ cause */
+ if (wil->isr_misc)
+ wil6210_irq_misc_thread(irq, cookie);
+
+ wil6210_unmask_irq_pseudo(wil);
+
+ return IRQ_HANDLED;
+}
+
+/* DEBUG
+ * There is subtle bug in hardware that causes IRQ to raise when it should be
+ * masked. It is quite rare and hard to debug.
+ *
+ * Catch irq issue if it happens and print all I can.
+ */
+static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause)
+{
+ if (!test_bit(wil_status_irqen, &wil->status)) {
+ u32 icm_rx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_rx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_rx = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_RX_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ u32 icm_tx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_tx = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_tx = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_TX_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ u32 icm_misc = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICM));
+ u32 icr_misc = wil_ioread32_and_clear(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, ICR));
+ u32 imv_misc = ioread32(wil->csr +
+ HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+ offsetof(struct RGF_ICR, IMV));
+ wil_err(wil, "IRQ when it should be masked: pseudo 0x%08x\n"
+ "Rx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
+ "Tx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
+ "Misc icm:icr:imv 0x%08x 0x%08x 0x%08x\n",
+ pseudo_cause,
+ icm_rx, icr_rx, imv_rx,
+ icm_tx, icr_tx, imv_tx,
+ icm_misc, icr_misc, imv_misc);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t wil6210_hardirq(int irq, void *cookie)
+{
+ irqreturn_t rc = IRQ_HANDLED;
+ struct wil6210_priv *wil = cookie;
+ u32 pseudo_cause = ioread32(wil->csr + HOSTADDR(RGF_DMA_PSEUDO_CAUSE));
+
+ /**
+ * pseudo_cause is Clear-On-Read, no need to ACK
+ */
+ if ((pseudo_cause == 0) || ((pseudo_cause & 0xff) == 0xff))
+ return IRQ_NONE;
+
+ /* FIXME: IRQ mask debug */
+ if (wil6210_debug_irq_mask(wil, pseudo_cause))
+ return IRQ_NONE;
+
+ wil6210_mask_irq_pseudo(wil);
+
+ /* Discover real IRQ cause
+ * There are 2 possible phases for every IRQ:
+ * - hard IRQ handler called right here
+ * - threaded handler called later
+ *
+ * Hard IRQ handler reads and clears ISR.
+ *
+ * If threaded handler requested, hard IRQ handler
+ * returns IRQ_WAKE_THREAD and saves ISR register value
+ * for the threaded handler use.
+ *
+ * voting for wake thread - need at least 1 vote
+ */
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_RX) &&
+ (wil6210_irq_rx(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_TX) &&
+ (wil6210_irq_tx(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ if ((pseudo_cause & BIT_DMA_PSEUDO_CAUSE_MISC) &&
+ (wil6210_irq_misc(irq, cookie) == IRQ_WAKE_THREAD))
+ rc = IRQ_WAKE_THREAD;
+
+ /* if thread is requested, it will unmask IRQ */
+ if (rc != IRQ_WAKE_THREAD)
+ wil6210_unmask_irq_pseudo(wil);
+
+ wil_dbg_IRQ(wil, "Hard IRQ 0x%08x\n", pseudo_cause);
+
+ return rc;
+}
+
+static int wil6210_request_3msi(struct wil6210_priv *wil, int irq)
+{
+ int rc;
+ /*
+ * IRQ's are in the following order:
+ * - Tx
+ * - Rx
+ * - Misc
+ */
+
+ rc = request_irq(irq, wil6210_irq_tx, IRQF_SHARED,
+ WIL_NAME"_tx", wil);
+ if (rc)
+ return rc;
+
+ rc = request_irq(irq + 1, wil6210_irq_rx, IRQF_SHARED,
+ WIL_NAME"_rx", wil);
+ if (rc)
+ goto free0;
+
+ rc = request_threaded_irq(irq + 2, wil6210_irq_misc,
+ wil6210_irq_misc_thread,
+ IRQF_SHARED, WIL_NAME"_misc", wil);
+ if (rc)
+ goto free1;
+
+ return 0;
+ /* error branch */
+free1:
+ free_irq(irq + 1, wil);
+free0:
+ free_irq(irq, wil);
+
+ return rc;
+}
+
+int wil6210_init_irq(struct wil6210_priv *wil, int irq)
+{
+ int rc;
+ if (wil->n_msi == 3)
+ rc = wil6210_request_3msi(wil, irq);
+ else
+ rc = request_threaded_irq(irq, wil6210_hardirq,
+ wil6210_thread_irq,
+ wil->n_msi ? 0 : IRQF_SHARED,
+ WIL_NAME, wil);
+ if (rc)
+ return rc;
+
+ wil6210_enable_irq(wil);
+
+ return 0;
+}
+
+void wil6210_fini_irq(struct wil6210_priv *wil, int irq)
+{
+ wil6210_disable_irq(wil);
+ free_irq(irq, wil);
+ if (wil->n_msi == 3) {
+ free_irq(irq + 1, wil);
+ free_irq(irq + 2, wil);
+ }
+}
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
new file mode 100644
index 0000000..95fcd36
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -0,0 +1,407 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/sched.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/if_arp.h>
+
+#include "wil6210.h"
+
+/*
+ * Due to a hardware issue,
+ * one has to read/write to/from NIC in 32-bit chunks;
+ * regular memcpy_fromio and siblings will
+ * not work on 64-bit platform - it uses 64-bit transactions
+ *
+ * Force 32-bit transactions to enable NIC on 64-bit platforms
+ *
+ * To avoid byte swap on big endian host, __raw_{read|write}l
+ * should be used - {read|write}l would swap bytes to provide
+ * little endian on PCI value in host endianness.
+ */
+void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
+ size_t count)
+{
+ u32 *d = dst;
+ const volatile u32 __iomem *s = src;
+
+ /* size_t is unsigned, if (count%4 != 0) it will wrap */
+ for (count += 4; count > 4; count -= 4)
+ *d++ = __raw_readl(s++);
+}
+
+void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
+ size_t count)
+{
+ volatile u32 __iomem *d = dst;
+ const u32 *s = src;
+
+ for (count += 4; count > 4; count -= 4)
+ __raw_writel(*s++, d++);
+}
+
+static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
+{
+ uint i;
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ wil_link_off(wil);
+ clear_bit(wil_status_fwconnected, &wil->status);
+
+ switch (wdev->sme_state) {
+ case CFG80211_SME_CONNECTED:
+ cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE,
+ NULL, 0, GFP_KERNEL);
+ break;
+ case CFG80211_SME_CONNECTING:
+ cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ GFP_KERNEL);
+ break;
+ default:
+ ;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
+ wil_vring_fini_tx(wil, i);
+}
+
+static void wil_disconnect_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work,
+ struct wil6210_priv, disconnect_worker);
+
+ _wil6210_disconnect(wil, NULL);
+}
+
+static void wil_connect_timer_fn(ulong x)
+{
+ struct wil6210_priv *wil = (void *)x;
+
+ wil_dbg(wil, "Connect timeout\n");
+
+ /* reschedule to thread context - disconnect won't
+ * run from atomic context
+ */
+ schedule_work(&wil->disconnect_worker);
+}
+
+int wil_priv_init(struct wil6210_priv *wil)
+{
+ wil_dbg(wil, "%s()\n", __func__);
+
+ mutex_init(&wil->mutex);
+ mutex_init(&wil->wmi_mutex);
+
+ init_completion(&wil->wmi_ready);
+
+ wil->pending_connect_cid = -1;
+ setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
+
+ INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker);
+ INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
+ INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
+
+ INIT_LIST_HEAD(&wil->pending_wmi_ev);
+ spin_lock_init(&wil->wmi_ev_lock);
+
+ wil->wmi_wq = create_singlethread_workqueue(WIL_NAME"_wmi");
+ if (!wil->wmi_wq)
+ return -EAGAIN;
+
+ wil->wmi_wq_conn = create_singlethread_workqueue(WIL_NAME"_connect");
+ if (!wil->wmi_wq_conn) {
+ destroy_workqueue(wil->wmi_wq);
+ return -EAGAIN;
+ }
+
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+
+ return 0;
+}
+
+void wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
+{
+ del_timer_sync(&wil->connect_timer);
+ _wil6210_disconnect(wil, bssid);
+}
+
+void wil_priv_deinit(struct wil6210_priv *wil)
+{
+ cancel_work_sync(&wil->disconnect_worker);
+ wil6210_disconnect(wil, NULL);
+ wmi_event_flush(wil);
+ destroy_workqueue(wil->wmi_wq_conn);
+ destroy_workqueue(wil->wmi_wq);
+}
+
+static void wil_target_reset(struct wil6210_priv *wil)
+{
+ wil_dbg(wil, "Resetting...\n");
+
+ /* register write */
+#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
+ /* register set = read, OR, write */
+#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
+ wil->csr + HOSTADDR(a))
+
+ /* hpal_perst_from_pad_src_n_mask */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
+ /* car_perst_rst_src_n_mask */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7));
+
+ W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
+ W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
+
+ msleep(100);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
+
+ msleep(100);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
+
+ msleep(2000);
+
+ W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */
+
+ msleep(2000);
+
+ wil_dbg(wil, "Reset completed\n");
+
+#undef W
+#undef S
+}
+
+void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
+{
+ le32_to_cpus(&r->base);
+ le16_to_cpus(&r->entry_size);
+ le16_to_cpus(&r->size);
+ le32_to_cpus(&r->tail);
+ le32_to_cpus(&r->head);
+}
+
+static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
+{
+ ulong to = msecs_to_jiffies(1000);
+ ulong left = wait_for_completion_timeout(&wil->wmi_ready, to);
+ if (0 == left) {
+ wil_err(wil, "Firmware not ready\n");
+ return -ETIME;
+ } else {
+ wil_dbg(wil, "FW ready after %d ms\n",
+ jiffies_to_msecs(to-left));
+ }
+ return 0;
+}
+
+/*
+ * We reset all the structures, and we reset the UMAC.
+ * After calling this routine, you're expected to reload
+ * the firmware.
+ */
+int wil_reset(struct wil6210_priv *wil)
+{
+ int rc;
+
+ cancel_work_sync(&wil->disconnect_worker);
+ wil6210_disconnect(wil, NULL);
+
+ wmi_event_flush(wil);
+
+ flush_workqueue(wil->wmi_wq);
+ flush_workqueue(wil->wmi_wq_conn);
+
+ wil6210_disable_irq(wil);
+ wil->status = 0;
+
+ /* TODO: put MAC in reset */
+ wil_target_reset(wil);
+
+ /* init after reset */
+ wil->pending_connect_cid = -1;
+ INIT_COMPLETION(wil->wmi_ready);
+
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+
+ /* TODO: release MAC reset */
+ wil6210_enable_irq(wil);
+
+ /* we just started MAC, wait for FW ready */
+ rc = wil_wait_for_fw_ready(wil);
+
+ return rc;
+}
+
+
+void wil_link_on(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ netif_carrier_on(ndev);
+ netif_tx_wake_all_queues(ndev);
+}
+
+void wil_link_off(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ wil_dbg(wil, "%s()\n", __func__);
+
+ netif_tx_stop_all_queues(ndev);
+ netif_carrier_off(ndev);
+}
+
+static int __wil_up(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct ieee80211_channel *channel = wdev->preset_chandef.chan;
+ int rc;
+ int bi;
+ u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
+
+ rc = wil_reset(wil);
+ if (rc)
+ return rc;
+
+ /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
+ wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ wil_dbg(wil, "type: STATION\n");
+ bi = 0;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_AP:
+ wil_dbg(wil, "type: AP\n");
+ bi = 100;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_P2P_CLIENT:
+ wil_dbg(wil, "type: P2P_CLIENT\n");
+ bi = 0;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_P2P_GO:
+ wil_dbg(wil, "type: P2P_GO\n");
+ bi = 100;
+ ndev->type = ARPHRD_ETHER;
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ wil_dbg(wil, "type: Monitor\n");
+ bi = 0;
+ ndev->type = ARPHRD_IEEE80211_RADIOTAP;
+ /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ /* Apply profile in the following order: */
+ /* SSID and channel for the AP */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
+ if (wdev->ssid_len == 0) {
+ wil_err(wil, "SSID not set\n");
+ return -EINVAL;
+ }
+ wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
+ if (channel)
+ wmi_set_channel(wil, channel->hw_value);
+ break;
+ default:
+ ;
+ }
+
+ /* MAC address - pre-requisite for other commands */
+ wmi_set_mac_address(wil, ndev->dev_addr);
+
+ /* Set up beaconing if required. */
+ rc = wmi_set_bcon(wil, bi, wmi_nettype);
+ if (rc)
+ return rc;
+
+ /* Rx VRING. After MAC and beacon */
+ wil_rx_init(wil);
+
+ return 0;
+}
+
+int wil_up(struct wil6210_priv *wil)
+{
+ int rc;
+
+ mutex_lock(&wil->mutex);
+ rc = __wil_up(wil);
+ mutex_unlock(&wil->mutex);
+
+ return rc;
+}
+
+static int __wil_down(struct wil6210_priv *wil)
+{
+ if (wil->scan_request) {
+ cfg80211_scan_done(wil->scan_request, true);
+ wil->scan_request = NULL;
+ }
+
+ wil6210_disconnect(wil, NULL);
+ wil_rx_fini(wil);
+
+ return 0;
+}
+
+int wil_down(struct wil6210_priv *wil)
+{
+ int rc;
+
+ mutex_lock(&wil->mutex);
+ rc = __wil_down(wil);
+ mutex_unlock(&wil->mutex);
+
+ return rc;
+}
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
new file mode 100644
index 0000000..3068b5c
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/slab.h>
+
+#include "wil6210.h"
+
+static int wil_open(struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_up(wil);
+}
+
+static int wil_stop(struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_down(wil);
+}
+
+/*
+ * AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static u16 wil_select_queue(struct net_device *ndev, struct sk_buff *skb)
+{
+ static const u16 wil_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ u16 rc;
+
+ skb->priority = cfg80211_classify8021d(skb);
+
+ rc = wil_1d_to_queue[skb->priority];
+
+ wil_dbg_TXRX(wil, "%s() %d -> %d\n", __func__, (int)skb->priority,
+ (int)rc);
+
+ return rc;
+}
+
+static const struct net_device_ops wil_netdev_ops = {
+ .ndo_open = wil_open,
+ .ndo_stop = wil_stop,
+ .ndo_start_xmit = wil_start_xmit,
+ .ndo_select_queue = wil_select_queue,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr)
+{
+ struct net_device *ndev;
+ struct wireless_dev *wdev;
+ struct wil6210_priv *wil;
+ struct ieee80211_channel *ch;
+ int rc = 0;
+
+ wdev = wil_cfg80211_init(dev);
+ if (IS_ERR(wdev)) {
+ dev_err(dev, "wil_cfg80211_init failed\n");
+ return wdev;
+ }
+
+ wil = wdev_to_wil(wdev);
+ wil->csr = csr;
+ wil->wdev = wdev;
+
+ rc = wil_priv_init(wil);
+ if (rc) {
+ dev_err(dev, "wil_priv_init failed\n");
+ goto out_wdev;
+ }
+
+ wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
+ /* default monitor channel */
+ ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
+ cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
+
+ ndev = alloc_netdev_mqs(0, "wlan%d", ether_setup, WIL6210_TX_QUEUES, 1);
+ if (!ndev) {
+ dev_err(dev, "alloc_netdev_mqs failed\n");
+ rc = -ENOMEM;
+ goto out_priv;
+ }
+
+ ndev->netdev_ops = &wil_netdev_ops;
+ ndev->ieee80211_ptr = wdev;
+ SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
+ wdev->netdev = ndev;
+
+ wil_link_off(wil);
+
+ return wil;
+
+ out_priv:
+ wil_priv_deinit(wil);
+
+ out_wdev:
+ wil_wdev_free(wil);
+
+ return ERR_PTR(rc);
+}
+
+void wil_if_free(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ if (!ndev)
+ return;
+
+ free_netdev(ndev);
+ wil_priv_deinit(wil);
+ wil_wdev_free(wil);
+}
+
+int wil_if_add(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ int rc;
+
+ rc = register_netdev(ndev);
+ if (rc < 0) {
+ dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
+ return rc;
+ }
+
+ wil_link_off(wil);
+
+ return 0;
+}
+
+void wil_if_remove(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+
+ unregister_netdev(ndev);
+}
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
new file mode 100644
index 0000000..0fc83ed
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/pci.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+
+static int use_msi = 1;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi,
+ " Use MSI interrupt: "
+ "0 - don't, 1 - (default) - single, or 3");
+
+/* Bus ops */
+static int wil_if_pcie_enable(struct wil6210_priv *wil)
+{
+ struct pci_dev *pdev = wil->pdev;
+ int rc;
+
+ pci_set_master(pdev);
+
+ /*
+ * how many MSI interrupts to request?
+ */
+ switch (use_msi) {
+ case 3:
+ case 1:
+ case 0:
+ break;
+ default:
+ wil_err(wil, "Invalid use_msi=%d, default to 1\n",
+ use_msi);
+ use_msi = 1;
+ }
+ wil->n_msi = use_msi;
+ if (wil->n_msi) {
+ wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi);
+ rc = pci_enable_msi_block(pdev, wil->n_msi);
+ if (rc && (wil->n_msi == 3)) {
+ wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
+ wil->n_msi = 1;
+ rc = pci_enable_msi_block(pdev, wil->n_msi);
+ }
+ if (rc) {
+ wil_err(wil, "pci_enable_msi failed, use INTx\n");
+ wil->n_msi = 0;
+ }
+ } else {
+ wil_dbg(wil, "MSI interrupts disabled, use INTx\n");
+ }
+
+ rc = wil6210_init_irq(wil, pdev->irq);
+ if (rc)
+ goto stop_master;
+
+ /* need reset here to obtain MAC */
+ rc = wil_reset(wil);
+ if (rc)
+ goto release_irq;
+
+ return 0;
+
+ release_irq:
+ wil6210_fini_irq(wil, pdev->irq);
+ /* safe to call if no MSI */
+ pci_disable_msi(pdev);
+ stop_master:
+ pci_clear_master(pdev);
+ return rc;
+}
+
+static int wil_if_pcie_disable(struct wil6210_priv *wil)
+{
+ struct pci_dev *pdev = wil->pdev;
+
+ pci_clear_master(pdev);
+ /* disable and release IRQ */
+ wil6210_fini_irq(wil, pdev->irq);
+ /* safe to call if no MSI */
+ pci_disable_msi(pdev);
+ /* TODO: disable HW */
+
+ return 0;
+}
+
+static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct wil6210_priv *wil;
+ struct device *dev = &pdev->dev;
+ void __iomem *csr;
+ int rc;
+
+ /* check HW */
+ dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n",
+ (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
+
+ if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
+ dev_err(&pdev->dev, "Not " WIL_NAME "? "
+ "BAR0 size is %lu while expecting %lu\n",
+ (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
+ return -ENODEV;
+ }
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ return -ENODEV;
+ }
+ /* rollback to err_disable_pdev */
+
+ rc = pci_request_region(pdev, 0, WIL_NAME);
+ if (rc) {
+ dev_err(&pdev->dev, "pci_request_region failed\n");
+ goto err_disable_pdev;
+ }
+ /* rollback to err_release_reg */
+
+ csr = pci_ioremap_bar(pdev, 0);
+ if (!csr) {
+ dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
+ rc = -ENODEV;
+ goto err_release_reg;
+ }
+ /* rollback to err_iounmap */
+ dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr);
+
+ wil = wil_if_alloc(dev, csr);
+ if (IS_ERR(wil)) {
+ rc = (int)PTR_ERR(wil);
+ dev_err(dev, "wil_if_alloc failed: %d\n", rc);
+ goto err_iounmap;
+ }
+ /* rollback to if_free */
+
+ pci_set_drvdata(pdev, wil);
+ wil->pdev = pdev;
+
+ /* FW should raise IRQ when ready */
+ rc = wil_if_pcie_enable(wil);
+ if (rc) {
+ wil_err(wil, "Enable device failed\n");
+ goto if_free;
+ }
+ /* rollback to bus_disable */
+
+ rc = wil_if_add(wil);
+ if (rc) {
+ wil_err(wil, "wil_if_add failed: %d\n", rc);
+ goto bus_disable;
+ }
+
+ wil6210_debugfs_init(wil);
+
+ /* check FW is alive */
+ wmi_echo(wil);
+
+ return 0;
+
+ bus_disable:
+ wil_if_pcie_disable(wil);
+ if_free:
+ wil_if_free(wil);
+ err_iounmap:
+ pci_iounmap(pdev, csr);
+ err_release_reg:
+ pci_release_region(pdev, 0);
+ err_disable_pdev:
+ pci_disable_device(pdev);
+
+ return rc;
+}
+
+static void wil_pcie_remove(struct pci_dev *pdev)
+{
+ struct wil6210_priv *wil = pci_get_drvdata(pdev);
+
+ wil6210_debugfs_remove(wil);
+ wil_if_pcie_disable(wil);
+ wil_if_remove(wil);
+ wil_if_free(wil);
+ pci_iounmap(pdev, wil->csr);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = {
+ { PCI_DEVICE(0x1ae9, 0x0301) },
+ { /* end: all zeroes */ },
+};
+MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
+
+static struct pci_driver wil6210_driver = {
+ .probe = wil_pcie_probe,
+ .remove = wil_pcie_remove,
+ .id_table = wil6210_pcie_ids,
+ .name = WIL_NAME,
+};
+
+module_pci_driver(wil6210_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Qualcomm Atheros <[email protected]>");
+MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
new file mode 100644
index 0000000..d787710
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -0,0 +1,892 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/hardirq.h>
+#include <net/ieee80211_radiotap.h>
+#include <linux/if_arp.h>
+#include <linux/moduleparam.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+#include "txrx.h"
+
+static bool rtap_include_phy_info;
+module_param(rtap_include_phy_info, bool, S_IRUGO);
+MODULE_PARM_DESC(rtap_include_phy_info,
+ " Include PHY info in the radiotap header, default - no");
+
+static inline int wil_vring_is_empty(struct vring *vring)
+{
+ return vring->swhead == vring->swtail;
+}
+
+static inline u32 wil_vring_next_tail(struct vring *vring)
+{
+ return (vring->swtail + 1) % vring->size;
+}
+
+static inline void wil_vring_advance_head(struct vring *vring, int n)
+{
+ vring->swhead = (vring->swhead + n) % vring->size;
+}
+
+static inline int wil_vring_is_full(struct vring *vring)
+{
+ return wil_vring_next_tail(vring) == vring->swhead;
+}
+/*
+ * Available space in Tx Vring
+ */
+static inline int wil_vring_avail_tx(struct vring *vring)
+{
+ u32 swhead = vring->swhead;
+ u32 swtail = vring->swtail;
+ int used = (vring->size + swhead - swtail) % vring->size;
+
+ return vring->size - used - 1;
+}
+
+static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
+{
+ struct device *dev = wil_to_dev(wil);
+ size_t sz = vring->size * sizeof(vring->va[0]);
+ uint i;
+
+ BUILD_BUG_ON(sizeof(vring->va[0]) != 32);
+
+ vring->swhead = 0;
+ vring->swtail = 0;
+ vring->ctx = kzalloc(vring->size * sizeof(vring->ctx[0]), GFP_KERNEL);
+ if (!vring->ctx) {
+ wil_err(wil, "vring_alloc [%d] failed to alloc ctx mem\n",
+ vring->size);
+ vring->va = NULL;
+ return -ENOMEM;
+ }
+ /*
+ * vring->va should be aligned on its size rounded up to power of 2
+ * This is granted by the dma_alloc_coherent
+ */
+ vring->va = dma_alloc_coherent(dev, sz, &vring->pa, GFP_KERNEL);
+ if (!vring->va) {
+ wil_err(wil, "vring_alloc [%d] failed to alloc DMA mem\n",
+ vring->size);
+ kfree(vring->ctx);
+ vring->ctx = NULL;
+ return -ENOMEM;
+ }
+ /* initially, all descriptors are SW owned
+ * For Tx and Rx, ownership bit is at the same location, thus
+ * we can use any
+ */
+ for (i = 0; i < vring->size; i++) {
+ volatile struct vring_tx_desc *d = &(vring->va[i].tx);
+ d->dma.status = TX_DMA_STATUS_DU;
+ }
+
+ wil_dbg(wil, "vring[%d] 0x%p:0x%016llx 0x%p\n", vring->size,
+ vring->va, (unsigned long long)vring->pa, vring->ctx);
+
+ return 0;
+}
+
+static void wil_vring_free(struct wil6210_priv *wil, struct vring *vring,
+ int tx)
+{
+ struct device *dev = wil_to_dev(wil);
+ size_t sz = vring->size * sizeof(vring->va[0]);
+
+ while (!wil_vring_is_empty(vring)) {
+ if (tx) {
+ volatile struct vring_tx_desc *d =
+ &vring->va[vring->swtail].tx;
+ dma_addr_t pa = d->dma.addr_low |
+ ((u64)d->dma.addr_high << 32);
+ struct sk_buff *skb = vring->ctx[vring->swtail];
+ if (skb) {
+ dma_unmap_single(dev, pa, d->dma.length,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ vring->ctx[vring->swtail] = NULL;
+ } else {
+ dma_unmap_page(dev, pa, d->dma.length,
+ DMA_TO_DEVICE);
+ }
+ vring->swtail = wil_vring_next_tail(vring);
+ } else { /* rx */
+ volatile struct vring_rx_desc *d =
+ &vring->va[vring->swtail].rx;
+ dma_addr_t pa = d->dma.addr_low |
+ ((u64)d->dma.addr_high << 32);
+ struct sk_buff *skb = vring->ctx[vring->swhead];
+ dma_unmap_single(dev, pa, d->dma.length,
+ DMA_FROM_DEVICE);
+ kfree_skb(skb);
+ wil_vring_advance_head(vring, 1);
+ }
+ }
+ dma_free_coherent(dev, sz, (void *)vring->va, vring->pa);
+ kfree(vring->ctx);
+ vring->pa = 0;
+ vring->va = NULL;
+ vring->ctx = NULL;
+}
+
+/**
+ * Allocate one skb for Rx VRING
+ *
+ * Safe to call from IRQ
+ */
+static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring,
+ u32 i, int headroom)
+{
+ struct device *dev = wil_to_dev(wil);
+ unsigned int sz = RX_BUF_LEN;
+ volatile struct vring_rx_desc *d = &(vring->va[i].rx);
+ dma_addr_t pa;
+
+ /* TODO align */
+ struct sk_buff *skb = dev_alloc_skb(sz + headroom);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ skb_reserve(skb, headroom);
+ skb_put(skb, sz);
+
+ pa = dma_map_single(dev, skb->data, skb->len, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(dev, pa))) {
+ kfree_skb(skb);
+ return -ENOMEM;
+ }
+
+ d->dma.d0 = BIT(9) | RX_DMA_D0_CMD_DMA_IT;
+ d->dma.addr_low = lower_32_bits(pa);
+ d->dma.addr_high = (u16)upper_32_bits(pa);
+ /* ip_length don't care */
+ /* b11 don't care */
+ /* error don't care */
+ d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
+ d->dma.length = sz;
+ vring->ctx[i] = skb;
+
+ return 0;
+}
+
+/**
+ * Adds radiotap header
+ *
+ * Any error indicated as "Bad FCS"
+ *
+ * Vendor data for 04:ce:14-1 (Wilocity-1) consists of:
+ * - Rx descriptor: 32 bytes
+ * - Phy info
+ */
+static void wil_rx_add_radiotap_header(struct wil6210_priv *wil,
+ struct sk_buff *skb,
+ volatile struct vring_rx_desc *d)
+{
+ struct wireless_dev *wdev = wil->wdev;
+ struct wil6210_rtap {
+ struct ieee80211_radiotap_header rthdr;
+ /* fields should be in the order of bits in rthdr.it_present */
+ /* flags */
+ u8 flags;
+ /* channel */
+ __le16 chnl_freq __aligned(2);
+ __le16 chnl_flags;
+ /* MCS */
+ u8 mcs_present;
+ u8 mcs_flags;
+ u8 mcs_index;
+ } __packed;
+ struct wil6210_rtap_vendor {
+ struct wil6210_rtap rtap;
+ /* vendor */
+ u8 vendor_oui[3] __aligned(2);
+ u8 vendor_ns;
+ __le16 vendor_skip;
+ u8 vendor_data[0];
+ } __packed;
+ struct wil6210_rtap_vendor *rtap_vendor;
+ int rtap_len = sizeof(struct wil6210_rtap);
+ int phy_length = 0; /* phy info header size, bytes */
+ static char phy_data[128];
+ struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+
+ if (rtap_include_phy_info) {
+ rtap_len = sizeof(*rtap_vendor) + sizeof(*d);
+ /* calculate additional length */
+ if (d->dma.status & RX_DMA_STATUS_PHY_INFO) {
+ /**
+ * PHY info starts from 8-byte boundary
+ * there are 8-byte lines, last line may be partially
+ * written (HW bug), thus FW configures for last line
+ * to be excessive. Driver skips this last line.
+ */
+ int len = min_t(int, 8 + sizeof(phy_data),
+ wil_rxdesc_phy_length(d));
+ if (len > 8) {
+ void *p = skb_tail_pointer(skb);
+ void *pa = PTR_ALIGN(p, 8);
+ if (skb_tailroom(skb) >= len + (pa - p)) {
+ phy_length = len - 8;
+ memcpy(phy_data, pa, phy_length);
+ }
+ }
+ }
+ rtap_len += phy_length;
+ }
+
+ if (skb_headroom(skb) < rtap_len &&
+ pskb_expand_head(skb, rtap_len, 0, GFP_ATOMIC)) {
+ wil_err(wil, "Unable to expand headrom to %d\n", rtap_len);
+ return;
+ }
+
+ rtap_vendor = (void *)skb_push(skb, rtap_len);
+ memset(rtap_vendor, 0, rtap_len);
+
+ rtap_vendor->rtap.rthdr.it_version = PKTHDR_RADIOTAP_VERSION;
+ rtap_vendor->rtap.rthdr.it_len = cpu_to_le16(rtap_len);
+ rtap_vendor->rtap.rthdr.it_present = cpu_to_le32(
+ (1 << IEEE80211_RADIOTAP_FLAGS) |
+ (1 << IEEE80211_RADIOTAP_CHANNEL) |
+ (1 << IEEE80211_RADIOTAP_MCS));
+ if (d->dma.status & RX_DMA_STATUS_ERROR)
+ rtap_vendor->rtap.flags |= IEEE80211_RADIOTAP_F_BADFCS;
+
+ rtap_vendor->rtap.chnl_freq = cpu_to_le16(ch ? ch->center_freq : 58320);
+ rtap_vendor->rtap.chnl_flags = cpu_to_le16(0);
+
+ rtap_vendor->rtap.mcs_present = IEEE80211_RADIOTAP_MCS_HAVE_MCS;
+ rtap_vendor->rtap.mcs_flags = 0;
+ rtap_vendor->rtap.mcs_index = wil_rxdesc_mcs(d);
+
+ if (rtap_include_phy_info) {
+ rtap_vendor->rtap.rthdr.it_present |= cpu_to_le32(1 <<
+ IEEE80211_RADIOTAP_VENDOR_NAMESPACE);
+ /* OUI for Wilocity 04:ce:14 */
+ rtap_vendor->vendor_oui[0] = 0x04;
+ rtap_vendor->vendor_oui[1] = 0xce;
+ rtap_vendor->vendor_oui[2] = 0x14;
+ rtap_vendor->vendor_ns = 1;
+ /* Rx descriptor + PHY data */
+ rtap_vendor->vendor_skip = cpu_to_le16(sizeof(*d) +
+ phy_length);
+ memcpy(rtap_vendor->vendor_data, (void *)d, sizeof(*d));
+ memcpy(rtap_vendor->vendor_data + sizeof(*d), phy_data,
+ phy_length);
+ }
+}
+
+/*
+ * Fast swap in place between 2 registers
+ */
+static void wil_swap_u16(u16 *a, u16 *b)
+{
+ *a ^= *b;
+ *b ^= *a;
+ *a ^= *b;
+}
+
+static void wil_swap_ethaddr(void *data)
+{
+ struct ethhdr *eth = data;
+ u16 *s = (u16 *)eth->h_source;
+ u16 *d = (u16 *)eth->h_dest;
+
+ wil_swap_u16(s++, d++);
+ wil_swap_u16(s++, d++);
+ wil_swap_u16(s, d);
+}
+
+/**
+ * reap 1 frame from @swhead
+ *
+ * Safe to call from IRQ
+ */
+static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
+ struct vring *vring)
+{
+ struct device *dev = wil_to_dev(wil);
+ struct net_device *ndev = wil_to_ndev(wil);
+ volatile struct vring_rx_desc *d;
+ struct sk_buff *skb;
+ dma_addr_t pa;
+ unsigned int sz = RX_BUF_LEN;
+ u8 ftype;
+ u8 ds_bits;
+
+ if (wil_vring_is_empty(vring))
+ return NULL;
+
+ d = &(vring->va[vring->swhead].rx);
+ if (!(d->dma.status & RX_DMA_STATUS_DU)) {
+ /* it is not error, we just reached end of Rx done area */
+ return NULL;
+ }
+
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ skb = vring->ctx[vring->swhead];
+ dma_unmap_single(dev, pa, sz, DMA_FROM_DEVICE);
+ skb_trim(skb, d->dma.length);
+
+ wil->stats.last_mcs_rx = wil_rxdesc_mcs(d);
+
+ /* use radiotap header only if required */
+ if (ndev->type == ARPHRD_IEEE80211_RADIOTAP)
+ wil_rx_add_radiotap_header(wil, skb, d);
+
+ wil_dbg_TXRX(wil, "Rx[%3d] : %d bytes\n", vring->swhead, d->dma.length);
+ wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ wil_vring_advance_head(vring, 1);
+
+ /* no extra checks if in sniffer mode */
+ if (ndev->type != ARPHRD_ETHER)
+ return skb;
+ /*
+ * Non-data frames may be delivered through Rx DMA channel (ex: BAR)
+ * Driver should recognize it by frame type, that is found
+ * in Rx descriptor. If type is not data, it is 802.11 frame as is
+ */
+ ftype = wil_rxdesc_ftype(d) << 2;
+ if (ftype != IEEE80211_FTYPE_DATA) {
+ wil_dbg_TXRX(wil, "Non-data frame ftype 0x%08x\n", ftype);
+ /* TODO: process it */
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ if (skb->len < ETH_HLEN) {
+ wil_err(wil, "Short frame, len = %d\n", skb->len);
+ /* TODO: process it (i.e. BAR) */
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ ds_bits = wil_rxdesc_ds_bits(d);
+ if (ds_bits == 1) {
+ /*
+ * HW bug - in ToDS mode, i.e. Rx on AP side,
+ * addresses get swapped
+ */
+ wil_swap_ethaddr(skb->data);
+ }
+
+ return skb;
+}
+
+/**
+ * allocate and fill up to @count buffers in rx ring
+ * buffers posted at @swtail
+ */
+static int wil_rx_refill(struct wil6210_priv *wil, int count)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct vring *v = &wil->vring_rx;
+ u32 next_tail;
+ int rc = 0;
+ int headroom = ndev->type == ARPHRD_IEEE80211_RADIOTAP ?
+ WIL6210_RTAP_SIZE : 0;
+
+ for (; next_tail = wil_vring_next_tail(v),
+ (next_tail != v->swhead) && (count-- > 0);
+ v->swtail = next_tail) {
+ rc = wil_vring_alloc_skb(wil, v, v->swtail, headroom);
+ if (rc) {
+ wil_err(wil, "Error %d in wil_rx_refill[%d]\n",
+ rc, v->swtail);
+ break;
+ }
+ }
+ iowrite32(v->swtail, wil->csr + HOSTADDR(v->hwtail));
+
+ return rc;
+}
+
+/*
+ * Pass Rx packet to the netif. Update statistics.
+ */
+static void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
+{
+ int rc;
+ unsigned int len = skb->len;
+
+ if (in_interrupt())
+ rc = netif_rx(skb);
+ else
+ rc = netif_rx_ni(skb);
+
+ if (likely(rc == NET_RX_SUCCESS)) {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += len;
+
+ } else {
+ ndev->stats.rx_dropped++;
+ }
+}
+
+/**
+ * Proceed all completed skb's from Rx VRING
+ *
+ * Safe to call from IRQ
+ */
+void wil_rx_handle(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct vring *v = &wil->vring_rx;
+ struct sk_buff *skb;
+
+ if (!v->va) {
+ wil_err(wil, "Rx IRQ while Rx not yet initialized\n");
+ return;
+ }
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+ while (NULL != (skb = wil_vring_reap_rx(wil, v))) {
+ wil_hex_dump_TXRX("Rx ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, skb_headlen(skb), false);
+
+ skb_orphan(skb);
+
+ if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ skb->dev = ndev;
+ skb_reset_mac_header(skb);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = htons(ETH_P_802_2);
+
+ } else {
+ skb->protocol = eth_type_trans(skb, ndev);
+ }
+
+ wil_netif_rx_any(skb, ndev);
+ }
+ wil_rx_refill(wil, v->size);
+}
+
+int wil_rx_init(struct wil6210_priv *wil)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct vring *vring = &wil->vring_rx;
+ int rc;
+ struct wmi_cfg_rx_chain_cmd cmd = {
+ .action = WMI_RX_CHAIN_ADD,
+ .rx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(RX_BUF_LEN),
+ },
+ .mid = 0, /* TODO - what is it? */
+ .decap_trans_type = WMI_DECAP_TYPE_802_3,
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_cfg_rx_chain_done_event evt;
+ } __packed evt;
+
+ vring->size = WIL6210_RX_RING_SIZE;
+ rc = wil_vring_alloc(wil, vring);
+ if (rc)
+ return rc;
+
+ cmd.rx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
+ cmd.rx_sw_ring.ring_size = cpu_to_le16(vring->size);
+ if (wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+
+ cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON);
+ if (ch)
+ cmd.sniffer_cfg.channel = ch->hw_value - 1;
+ cmd.sniffer_cfg.phy_info_mode =
+ cpu_to_le32(ndev->type == ARPHRD_IEEE80211_RADIOTAP);
+ cmd.sniffer_cfg.phy_support =
+ cpu_to_le32((wil->monitor_flags & MONITOR_FLAG_CONTROL)
+ ? WMI_SNIFFER_CP : WMI_SNIFFER_DP);
+ }
+ /* typical time for secure PCP is 840ms */
+ rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
+ WMI_CFG_RX_CHAIN_DONE_EVENTID, &evt, sizeof(evt), 2000);
+ if (rc)
+ goto err_free;
+
+ vring->hwtail = le32_to_cpu(evt.evt.rx_ring_tail_ptr);
+
+ wil_dbg(wil, "Rx init: status %d tail 0x%08x\n",
+ le32_to_cpu(evt.evt.status), vring->hwtail);
+
+ rc = wil_rx_refill(wil, vring->size);
+ if (rc)
+ goto err_free;
+
+ return 0;
+ err_free:
+ wil_vring_free(wil, vring, 0);
+
+ return rc;
+}
+
+void wil_rx_fini(struct wil6210_priv *wil)
+{
+ struct vring *vring = &wil->vring_rx;
+
+ if (vring->va) {
+ int rc;
+ struct wmi_cfg_rx_chain_cmd cmd = {
+ .action = cpu_to_le32(WMI_RX_CHAIN_DEL),
+ .rx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(RX_BUF_LEN),
+ },
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_cfg_rx_chain_done_event cfg;
+ } __packed wmi_rx_cfg_reply;
+
+ rc = wmi_call(wil, WMI_CFG_RX_CHAIN_CMDID, &cmd, sizeof(cmd),
+ WMI_CFG_RX_CHAIN_DONE_EVENTID,
+ &wmi_rx_cfg_reply, sizeof(wmi_rx_cfg_reply),
+ 100);
+ wil_vring_free(wil, vring, 0);
+ }
+}
+
+int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
+ int cid, int tid)
+{
+ struct wireless_dev *wdev = wil->wdev;
+ int rc;
+ struct wmi_vring_cfg_cmd cmd = {
+ .action = cpu_to_le32(WMI_VRING_CMD_ADD),
+ .vring_cfg = {
+ .tx_sw_ring = {
+ .max_mpdu_size = cpu_to_le16(TX_BUF_LEN),
+ },
+ .ringid = id,
+ .cidxtid = (cid & 0xf) | ((tid & 0xf) << 4),
+ .encap_trans_type = WMI_VRING_ENC_TYPE_802_3,
+ .mac_ctrl = 0,
+ .to_resolution = 0,
+ .agg_max_wsize = 16,
+ .schd_params = {
+ .priority = cpu_to_le16(0),
+ .timeslot_us = cpu_to_le16(0xfff),
+ },
+ },
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_vring_cfg_done_event cmd;
+ } __packed reply;
+ struct vring *vring = &wil->vring_tx[id];
+
+ if (vring->va) {
+ wil_err(wil, "Tx ring [%d] already allocated\n", id);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ vring->size = size;
+ rc = wil_vring_alloc(wil, vring);
+ if (rc)
+ goto out;
+
+ cmd.vring_cfg.tx_sw_ring.ring_mem_base = cpu_to_le64(vring->pa);
+ cmd.vring_cfg.tx_sw_ring.ring_size = cpu_to_le16(vring->size);
+ /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ /* TODO: WMI_VRING_DS_STATION */
+ cmd.vring_cfg.ds_cfg = WMI_VRING_DS_PBSS;
+ break;
+ case NL80211_IFTYPE_AP:
+ /* TODO: WMI_VRING_DS_AP */
+ cmd.vring_cfg.ds_cfg = WMI_VRING_DS_PBSS;
+ break;
+ case NL80211_IFTYPE_P2P_CLIENT:
+ cmd.vring_cfg.ds_cfg = WMI_VRING_DS_STATION;
+ break;
+ case NL80211_IFTYPE_P2P_GO:
+ cmd.vring_cfg.ds_cfg = WMI_VRING_DS_AP;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ goto out_free;
+
+ }
+ rc = wmi_call(wil, WMI_VRING_CFG_CMDID, &cmd, sizeof(cmd),
+ WMI_VRING_CFG_DONE_EVENTID, &reply, sizeof(reply), 100);
+ if (rc)
+ goto out_free;
+
+ if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) {
+ wil_err(wil, "Tx config failed, status 0x%02x\n",
+ reply.cmd.status);
+ goto out_free;
+ }
+ vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
+
+ return 0;
+ out_free:
+ wil_vring_free(wil, vring, 1);
+ out:
+
+ return rc;
+}
+
+void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
+{
+ struct vring *vring = &wil->vring_tx[id];
+
+ if (!vring->va)
+ return;
+
+ wil_vring_free(wil, vring, 1);
+}
+
+static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
+ struct sk_buff *skb)
+{
+ struct vring *v = &wil->vring_tx[0];
+
+ if (v->va)
+ return v;
+
+ return NULL;
+}
+
+static int wil_tx_desc_map(volatile struct vring_tx_desc *d,
+ dma_addr_t pa, u32 len)
+{
+ d->dma.addr_low = lower_32_bits(pa);
+ d->dma.addr_high = (u16)upper_32_bits(pa);
+ d->dma.ip_length = 0;
+ /* 0..6: mac_length; 7:ip_version 0-IP6 1-IP4*/
+ d->dma.b11 = 0/*14 | BIT(7)*/;
+ d->dma.error = 0;
+ d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
+ d->dma.length = len;
+ d->dma.d0 = 0;
+ d->mac.d[0] = 0;
+ d->mac.d[1] = 0;
+ d->mac.d[2] = 0;
+ d->mac.ucode_cmd = 0;
+ /* use dst index 0 */
+ d->mac.d[1] |= BIT(MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS) |
+ (0 << MAC_CFG_DESC_TX_1_DST_INDEX_POS);
+ /* translation type: 0 - bypass; 1 - 802.3; 2 - native wifi */
+ d->mac.d[2] = BIT(MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS) |
+ (1 << MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS);
+
+ return 0;
+}
+
+static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
+ struct sk_buff *skb)
+{
+ struct device *dev = wil_to_dev(wil);
+ volatile struct vring_tx_desc *d;
+ u32 swhead = vring->swhead;
+ int avail = wil_vring_avail_tx(vring);
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ uint f;
+ int vring_index = vring - wil->vring_tx;
+ uint i = swhead;
+ dma_addr_t pa;
+
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+
+ if (avail < vring->size/8)
+ netif_tx_stop_all_queues(wil_to_ndev(wil));
+ if (avail < 1 + nr_frags) {
+ wil_err(wil, "Tx ring full. No space for %d fragments\n",
+ 1 + nr_frags);
+ return -ENOMEM;
+ }
+ d = &(vring->va[i].tx);
+
+ /* FIXME FW can accept only unicast frames for the peer */
+ memcpy(skb->data, wil->dst_addr[vring_index], ETH_ALEN);
+
+ pa = dma_map_single(dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+
+ wil_dbg_TXRX(wil, "Tx skb %d bytes %p -> %#08llx\n", skb_headlen(skb),
+ skb->data, (unsigned long long)pa);
+ wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, skb_headlen(skb), false);
+
+ if (unlikely(dma_mapping_error(dev, pa)))
+ return -EINVAL;
+ /* 1-st segment */
+ wil_tx_desc_map(d, pa, skb_headlen(skb));
+ d->mac.d[2] |= ((nr_frags + 1) <<
+ MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
+ /* middle segments */
+ for (f = 0; f < nr_frags; f++) {
+ const struct skb_frag_struct *frag =
+ &skb_shinfo(skb)->frags[f];
+ int len = skb_frag_size(frag);
+ i = (swhead + f + 1) % vring->size;
+ d = &(vring->va[i].tx);
+ pa = skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag),
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(dev, pa)))
+ goto dma_error;
+ wil_tx_desc_map(d, pa, len);
+ vring->ctx[i] = NULL;
+ }
+ /* for the last seg only */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_EOP_POS);
+ d->dma.d0 |= BIT(9); /* BUG: undocumented bit */
+ d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS);
+ d->dma.d0 |= (vring_index << DMA_CFG_DESC_TX_0_QID_POS);
+
+ wil_hex_dump_TXRX("Tx ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ /* advance swhead */
+ wil_vring_advance_head(vring, nr_frags + 1);
+ wil_dbg_TXRX(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead);
+ iowrite32(vring->swhead, wil->csr + HOSTADDR(vring->hwtail));
+ /* hold reference to skb
+ * to prevent skb release before accounting
+ * in case of immediate "tx done"
+ */
+ vring->ctx[i] = skb_get(skb);
+
+ return 0;
+ dma_error:
+ /* unmap what we have mapped */
+ /* Note: increment @f to operate with positive index */
+ for (f++; f > 0; f--) {
+ i = (swhead + f) % vring->size;
+ d = &(vring->va[i].tx);
+ d->dma.status = TX_DMA_STATUS_DU;
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ if (vring->ctx[i])
+ dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ }
+
+ return -EINVAL;
+}
+
+
+netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ struct vring *vring;
+ int rc;
+
+ wil_dbg_TXRX(wil, "%s()\n", __func__);
+ if (!test_bit(wil_status_fwready, &wil->status)) {
+ wil_err(wil, "FW not ready\n");
+ goto drop;
+ }
+ if (!test_bit(wil_status_fwconnected, &wil->status)) {
+ wil_err(wil, "FW not connected\n");
+ goto drop;
+ }
+ if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
+ wil_err(wil, "Xmit in monitor mode not supported\n");
+ goto drop;
+ }
+ if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
+ rc = wmi_tx_eapol(wil, skb);
+ } else {
+ /* find vring */
+ vring = wil_find_tx_vring(wil, skb);
+ if (!vring) {
+ wil_err(wil, "No Tx VRING available\n");
+ goto drop;
+ }
+ /* set up vring entry */
+ rc = wil_tx_vring(wil, vring, skb);
+ }
+ switch (rc) {
+ case 0:
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ case -ENOMEM:
+ return NETDEV_TX_BUSY;
+ default:
+ ; /* goto drop; */
+ break;
+ }
+ drop:
+ netif_tx_stop_all_queues(ndev);
+ ndev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+
+ return NET_XMIT_DROP;
+}
+
+/**
+ * Clean up transmitted skb's from the Tx VRING
+ *
+ * Safe to call from IRQ
+ */
+void wil_tx_complete(struct wil6210_priv *wil, int ringid)
+{
+ struct device *dev = wil_to_dev(wil);
+ struct vring *vring = &wil->vring_tx[ringid];
+
+ if (!vring->va) {
+ wil_err(wil, "Tx irq[%d]: vring not initialized\n", ringid);
+ return;
+ }
+
+ wil_dbg_TXRX(wil, "%s(%d)\n", __func__, ringid);
+
+ while (!wil_vring_is_empty(vring)) {
+ volatile struct vring_tx_desc *d = &vring->va[vring->swtail].tx;
+ dma_addr_t pa;
+ struct sk_buff *skb;
+ if (!(d->dma.status & TX_DMA_STATUS_DU))
+ break;
+
+ wil_dbg_TXRX(wil,
+ "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n",
+ vring->swtail, d->dma.length, d->dma.status,
+ d->dma.error);
+ wil_hex_dump_TXRX("TxC ", DUMP_PREFIX_NONE, 32, 4,
+ (const void *)d, sizeof(*d), false);
+
+ pa = d->dma.addr_low | ((u64)d->dma.addr_high << 32);
+ skb = vring->ctx[vring->swtail];
+ if (skb) {
+ dma_unmap_single(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ vring->ctx[vring->swtail] = NULL;
+ } else {
+ dma_unmap_page(dev, pa, d->dma.length, DMA_TO_DEVICE);
+ }
+ d->dma.addr_low = 0;
+ d->dma.addr_high = 0;
+ d->dma.length = 0;
+ d->dma.status = TX_DMA_STATUS_DU;
+ vring->swtail = wil_vring_next_tail(vring);
+ }
+ if (wil_vring_avail_tx(vring) > vring->size/4)
+ netif_tx_wake_all_queues(wil_to_ndev(wil));
+}
diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h
new file mode 100644
index 0000000..45a61f5
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/txrx.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WIL6210_TXRX_H
+#define WIL6210_TXRX_H
+
+#define BUF_SW_OWNED (1)
+#define BUF_HW_OWNED (0)
+
+/* size of max. Rx packet */
+#define RX_BUF_LEN (2048)
+#define TX_BUF_LEN (2048)
+/* how many bytes to reserve for rtap header? */
+#define WIL6210_RTAP_SIZE (128)
+
+/* Tx/Rx path */
+/*
+ * Tx descriptor - MAC part
+ * [dword 0]
+ * bit 0.. 9 : lifetime_expiry_value:10
+ * bit 10 : interrup_en:1
+ * bit 11 : status_en:1
+ * bit 12..13 : txss_override:2
+ * bit 14 : timestamp_insertion:1
+ * bit 15 : duration_preserve:1
+ * bit 16..21 : reserved0:6
+ * bit 22..26 : mcs_index:5
+ * bit 27 : mcs_en:1
+ * bit 28..29 : reserved1:2
+ * bit 30 : reserved2:1
+ * bit 31 : sn_preserved:1
+ * [dword 1]
+ * bit 0.. 3 : pkt_mode:4
+ * bit 4 : pkt_mode_en:1
+ * bit 5.. 7 : reserved0:3
+ * bit 8..13 : reserved1:6
+ * bit 14 : reserved2:1
+ * bit 15 : ack_policy_en:1
+ * bit 16..19 : dst_index:4
+ * bit 20 : dst_index_en:1
+ * bit 21..22 : ack_policy:2
+ * bit 23 : lifetime_en:1
+ * bit 24..30 : max_retry:7
+ * bit 31 : max_retry_en:1
+ * [dword 2]
+ * bit 0.. 7 : num_of_descriptors:8
+ * bit 8..17 : reserved:10
+ * bit 18..19 : l2_translation_type:2
+ * bit 20 : snap_hdr_insertion_en:1
+ * bit 21 : vlan_removal_en:1
+ * bit 22..31 : reserved0:10
+ * [dword 3]
+ * bit 0.. 31: ucode_cmd:32
+ */
+struct vring_tx_mac {
+ u32 d[3];
+ u32 ucode_cmd;
+} __packed;
+
+/* TX MAC Dword 0 */
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_POS 0
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_LEN 10
+#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_MSK 0x3FF
+
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_POS 10
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_INTERRUP_EN_MSK 0x400
+
+#define MAC_CFG_DESC_TX_0_STATUS_EN_POS 11
+#define MAC_CFG_DESC_TX_0_STATUS_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_STATUS_EN_MSK 0x800
+
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_POS 12
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_LEN 2
+#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_MSK 0x3000
+
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_POS 14
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_LEN 1
+#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_MSK 0x4000
+
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_POS 15
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_LEN 1
+#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_MSK 0x8000
+
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_POS 22
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_LEN 5
+#define MAC_CFG_DESC_TX_0_MCS_INDEX_MSK 0x7C00000
+
+#define MAC_CFG_DESC_TX_0_MCS_EN_POS 27
+#define MAC_CFG_DESC_TX_0_MCS_EN_LEN 1
+#define MAC_CFG_DESC_TX_0_MCS_EN_MSK 0x8000000
+
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_POS 31
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_LEN 1
+#define MAC_CFG_DESC_TX_0_SN_PRESERVED_MSK 0x80000000
+
+/* TX MAC Dword 1 */
+#define MAC_CFG_DESC_TX_1_PKT_MODE_POS 0
+#define MAC_CFG_DESC_TX_1_PKT_MODE_LEN 4
+#define MAC_CFG_DESC_TX_1_PKT_MODE_MSK 0xF
+
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_POS 4
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_MSK 0x10
+
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_POS 15
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_MSK 0x8000
+
+#define MAC_CFG_DESC_TX_1_DST_INDEX_POS 16
+#define MAC_CFG_DESC_TX_1_DST_INDEX_LEN 4
+#define MAC_CFG_DESC_TX_1_DST_INDEX_MSK 0xF0000
+
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS 20
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_MSK 0x100000
+
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_POS 21
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_LEN 2
+#define MAC_CFG_DESC_TX_1_ACK_POLICY_MSK 0x600000
+
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_POS 23
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_LIFETIME_EN_MSK 0x800000
+
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_POS 24
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_LEN 7
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_MSK 0x7F000000
+
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_POS 31
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_LEN 1
+#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_MSK 0x80000000
+
+/* TX MAC Dword 2 */
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS 0
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_LEN 8
+#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_MSK 0xFF
+
+#define MAC_CFG_DESC_TX_2_RESERVED_POS 8
+#define MAC_CFG_DESC_TX_2_RESERVED_LEN 10
+#define MAC_CFG_DESC_TX_2_RESERVED_MSK 0x3FF00
+
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS 18
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_LEN 2
+#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_MSK 0xC0000
+
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS 20
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_LEN 1
+#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_MSK 0x100000
+
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_POS 21
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_LEN 1
+#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_MSK 0x200000
+
+/* TX MAC Dword 3 */
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_POS 0
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_LEN 32
+#define MAC_CFG_DESC_TX_3_UCODE_CMD_MSK 0xFFFFFFFF
+
+/* TX DMA Dword 0 */
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_POS 0
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_LEN 8
+#define DMA_CFG_DESC_TX_0_L4_LENGTH_MSK 0xFF
+
+#define DMA_CFG_DESC_TX_0_CMD_EOP_POS 8
+#define DMA_CFG_DESC_TX_0_CMD_EOP_LEN 1
+#define DMA_CFG_DESC_TX_0_CMD_EOP_MSK 0x100
+
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS 10
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_LEN 1
+#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_MSK 0x400
+
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_POS 11
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_LEN 2
+#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_MSK 0x1800
+
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_POS 13
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_MSK 0x2000
+
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_POS 14
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_MSK 0x4000
+
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_POS 15
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_MSK 0x8000
+
+#define DMA_CFG_DESC_TX_0_QID_POS 16
+#define DMA_CFG_DESC_TX_0_QID_LEN 5
+#define DMA_CFG_DESC_TX_0_QID_MSK 0x1F0000
+
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_POS 21
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_LEN 1
+#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_MSK 0x200000
+
+#define DMA_CFG_DESC_TX_0_L4_TYPE_POS 30
+#define DMA_CFG_DESC_TX_0_L4_TYPE_LEN 2
+#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000
+
+
+#define TX_DMA_STATUS_DU BIT(0)
+
+struct vring_tx_dma {
+ u32 d0;
+ u32 addr_low;
+ u16 addr_high;
+ u8 ip_length;
+ u8 b11; /* 0..6: mac_length; 7:ip_version */
+ u8 error; /* 0..2: err; 3..7: reserved; */
+ u8 status; /* 0: used; 1..7; reserved */
+ u16 length;
+} __packed;
+
+/*
+ * Rx descriptor - MAC part
+ * [dword 0]
+ * bit 0.. 3 : tid:4 The QoS (b3-0) TID Field
+ * bit 4.. 6 : connection_id:3 :The Source index that was found during
+ * Parsing the TA. This field is used to define the source of the packet
+ * bit 7 : reserved:1
+ * bit 8.. 9 : mac_id:2 : The MAC virtual Ring number (always zero)
+ * bit 10..11 : frame_type:2 : The FC Control (b3-2) - MPDU Type
+ * (management, data, control and extension)
+ * bit 12..15 : frame_subtype:4 : The FC Control (b7-4) - Frame Subtype
+ * bit 16..27 : seq_number:12 The received Sequence number field
+ * bit 28..31 : extended:4 extended subtype
+ * [dword 1]
+ * bit 0.. 3 : reserved
+ * bit 4.. 5 : key_id:2
+ * bit 6 : decrypt_bypass:1
+ * bit 7 : security:1
+ * bit 8.. 9 : ds_bits:2
+ * bit 10 : a_msdu_present:1 from qos header
+ * bit 11 : a_msdu_type:1 from qos header
+ * bit 12 : a_mpdu:1 part of AMPDU aggregation
+ * bit 13 : broadcast:1
+ * bit 14 : mutlicast:1
+ * bit 15 : reserved:1
+ * bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet
+ * is received from
+ * bit 21..24 : mcs:4
+ * bit 25..28 : mic_icr:4
+ * bit 29..31 : reserved:3
+ * [dword 2]
+ * bit 0.. 2 : time_slot:3 The timeslot that the MPDU is received
+ * bit 3 : fc_protocol_ver:1 The FC Control (b0) - Protocol Version
+ * bit 4 : fc_order:1 The FC Control (b15) -Order
+ * bit 5.. 7 : qos_ack_policy:3 The QoS (b6-5) ack policy Field
+ * bit 8 : esop:1 The QoS (b4) ESOP field
+ * bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field
+ * bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field
+ * bit 15 : qos_ac_constraint:1
+ * bit 16..31 : pn_15_0:16 low 2 bytes of PN
+ * [dword 3]
+ * bit 0..31 : pn_47_16:32 high 4 bytes of PN
+ */
+struct vring_rx_mac {
+ u32 d0;
+ u32 d1;
+ u16 w4;
+ u16 pn_15_0;
+ u32 pn_47_16;
+} __packed;
+
+/*
+ * Rx descriptor - DMA part
+ * [dword 0]
+ * bit 0.. 7 : l4_length:8 layer 4 length
+ * bit 8.. 9 : reserved:2
+ * bit 10 : cmd_dma_it:1
+ * bit 11..15 : reserved:5
+ * bit 16..29 : phy_info_length:14
+ * bit 30..31 : l4_type:2 valid if the L4I bit is set in the status field
+ * [dword 1]
+ * bit 0..31 : addr_low:32 The payload buffer low address
+ * [dword 2]
+ * bit 0..15 : addr_high:16 The payload buffer high address
+ * bit 16..23 : ip_length:8
+ * bit 24..30 : mac_length:7
+ * bit 31 : ip_version:1
+ * [dword 3]
+ * [byte 12] error
+ * [byte 13] status
+ * bit 0 : du:1
+ * bit 1 : eop:1
+ * bit 2 : error:1
+ * bit 3 : mi:1
+ * bit 4 : l3_identified:1
+ * bit 5 : l4_identified:1
+ * bit 6 : phy_info_included:1
+ * bit 7 : reserved:1
+ * [word 7] length
+ *
+ */
+
+#define RX_DMA_D0_CMD_DMA_IT BIT(10)
+
+#define RX_DMA_STATUS_DU BIT(0)
+#define RX_DMA_STATUS_ERROR BIT(2)
+#define RX_DMA_STATUS_PHY_INFO BIT(6)
+
+struct vring_rx_dma {
+ u32 d0;
+ u32 addr_low;
+ u16 addr_high;
+ u8 ip_length;
+ u8 b11;
+ u8 error;
+ u8 status;
+ u16 length;
+} __packed;
+
+struct vring_tx_desc {
+ struct vring_tx_mac mac;
+ struct vring_tx_dma dma;
+} __packed;
+
+struct vring_rx_desc {
+ struct vring_rx_mac mac;
+ struct vring_rx_dma dma;
+} __packed;
+
+union vring_desc {
+ struct vring_tx_desc tx;
+ struct vring_rx_desc rx;
+} __packed;
+
+static inline int wil_rxdesc_phy_length(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->dma.d0, 16, 29);
+}
+
+static inline int wil_rxdesc_mcs(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d1, 21, 24);
+}
+
+static inline int wil_rxdesc_ds_bits(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d1, 8, 9);
+}
+
+static inline int wil_rxdesc_ftype(volatile struct vring_rx_desc *d)
+{
+ return WIL_GET_BITS(d->mac.d0, 10, 11);
+}
+
+#endif /* WIL6210_TXRX_H */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
new file mode 100644
index 0000000..ef5a17f
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -0,0 +1,361 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __WIL6210_H__
+#define __WIL6210_H__
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/cfg80211.h>
+
+#define WIL_NAME "wil6210"
+
+/**
+ * extract bits [@b0:@b1] (inclusive) from the value @x
+ * it should be @b0 <= @b1, or result is incorrect
+ */
+static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
+{
+ return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1);
+}
+
+#define WIL6210_MEM_SIZE (2*1024*1024UL)
+
+#define WIL6210_TX_QUEUES (4)
+
+#define WIL6210_RX_RING_SIZE (128)
+#define WIL6210_TX_RING_SIZE (128)
+#define WIL6210_MAX_TX_RINGS (24)
+
+/* Hardware definitions begin */
+
+/*
+ * Mapping
+ * RGF File | Host addr | FW addr
+ * | |
+ * user_rgf | 0x000000 | 0x880000
+ * dma_rgf | 0x001000 | 0x881000
+ * pcie_rgf | 0x002000 | 0x882000
+ * | |
+ */
+
+/* Where various structures placed in host address space */
+#define WIL6210_FW_HOST_OFF (0x880000UL)
+
+#define HOSTADDR(fwaddr) (fwaddr - WIL6210_FW_HOST_OFF)
+
+/*
+ * Interrupt control registers block
+ *
+ * each interrupt controlled by the same bit in all registers
+ */
+struct RGF_ICR {
+ u32 ICC; /* Cause Control, RW: 0 - W1C, 1 - COR */
+ u32 ICR; /* Cause, W1C/COR depending on ICC */
+ u32 ICM; /* Cause masked (ICR & ~IMV), W1C/COR depending on ICC */
+ u32 ICS; /* Cause Set, WO */
+ u32 IMV; /* Mask, RW+S/C */
+ u32 IMS; /* Mask Set, write 1 to set */
+ u32 IMC; /* Mask Clear, write 1 to clear */
+} __packed;
+
+/* registers - FW addresses */
+#define RGF_USER_USER_SCRATCH_PAD (0x8802bc)
+#define RGF_USER_USER_ICR (0x880b4c) /* struct RGF_ICR */
+ #define BIT_USER_USER_ICR_SW_INT_2 BIT(18)
+#define RGF_USER_CLKS_CTL_SW_RST_MASK_0 (0x880b14)
+#define RGF_USER_MAC_CPU_0 (0x8801fc)
+#define RGF_USER_USER_CPU_0 (0x8801e0)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_0 (0x880b04)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_1 (0x880b08)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_2 (0x880b0c)
+#define RGF_USER_CLKS_CTL_SW_RST_VEC_3 (0x880b10)
+
+#define RGF_DMA_PSEUDO_CAUSE (0x881c68)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_SW (0x881c6c)
+#define RGF_DMA_PSEUDO_CAUSE_MASK_FW (0x881c70)
+ #define BIT_DMA_PSEUDO_CAUSE_RX BIT(0)
+ #define BIT_DMA_PSEUDO_CAUSE_TX BIT(1)
+ #define BIT_DMA_PSEUDO_CAUSE_MISC BIT(2)
+
+#define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */
+ #define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0)
+ #define BIT_DMA_EP_TX_ICR_TX_DONE_N(n) BIT(n+1) /* n = [0..23] */
+#define RGF_DMA_EP_RX_ICR (0x881bd0) /* struct RGF_ICR */
+ #define BIT_DMA_EP_RX_ICR_RX_DONE BIT(0)
+#define RGF_DMA_EP_MISC_ICR (0x881bec) /* struct RGF_ICR */
+ #define BIT_DMA_EP_MISC_ICR_RX_HTRSH BIT(0)
+ #define BIT_DMA_EP_MISC_ICR_TX_NO_ACT BIT(1)
+ #define BIT_DMA_EP_MISC_ICR_FW_INT0 BIT(28)
+ #define BIT_DMA_EP_MISC_ICR_FW_INT1 BIT(29)
+
+/* Interrupt moderation control */
+#define RGF_DMA_ITR_CNT_TRSH (0x881c5c)
+#define RGF_DMA_ITR_CNT_DATA (0x881c60)
+#define RGF_DMA_ITR_CNT_CRL (0x881C64)
+ #define BIT_DMA_ITR_CNT_CRL_EN BIT(0)
+ #define BIT_DMA_ITR_CNT_CRL_EXT_TICK BIT(1)
+ #define BIT_DMA_ITR_CNT_CRL_FOREVER BIT(2)
+ #define BIT_DMA_ITR_CNT_CRL_CLR BIT(3)
+ #define BIT_DMA_ITR_CNT_CRL_REACH_TRSH BIT(4)
+
+/* popular locations */
+#define HOST_MBOX HOSTADDR(RGF_USER_USER_SCRATCH_PAD)
+#define HOST_SW_INT (HOSTADDR(RGF_USER_USER_ICR) + \
+ offsetof(struct RGF_ICR, ICS))
+#define SW_INT_MBOX BIT_USER_USER_ICR_SW_INT_2
+
+/* ISR register bits */
+#define ISR_MISC_FW_READY BIT_DMA_EP_MISC_ICR_FW_INT0
+#define ISR_MISC_MBOX_EVT BIT_DMA_EP_MISC_ICR_FW_INT1
+
+/* Hardware definitions end */
+
+struct wil6210_mbox_ring {
+ u32 base;
+ u16 entry_size; /* max. size of mbox entry, incl. all headers */
+ u16 size;
+ u32 tail;
+ u32 head;
+} __packed;
+
+struct wil6210_mbox_ring_desc {
+ __le32 sync;
+ __le32 addr;
+} __packed;
+
+/* at HOST_OFF_WIL6210_MBOX_CTL */
+struct wil6210_mbox_ctl {
+ struct wil6210_mbox_ring tx;
+ struct wil6210_mbox_ring rx;
+} __packed;
+
+struct wil6210_mbox_hdr {
+ __le16 seq;
+ __le16 len; /* payload, bytes after this header */
+ __le16 type;
+ u8 flags;
+ u8 reserved;
+} __packed;
+
+#define WIL_MBOX_HDR_TYPE_WMI (0)
+
+/* max. value for wil6210_mbox_hdr.len */
+#define MAX_MBOXITEM_SIZE (240)
+
+struct wil6210_mbox_hdr_wmi {
+ u8 reserved0[2];
+ __le16 id;
+ __le16 info1; /* bits [0..3] - device_id, rest - unused */
+ u8 reserved1[2];
+} __packed;
+
+struct pending_wmi_event {
+ struct list_head list;
+ struct {
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_hdr_wmi wmi;
+ u8 data[0];
+ } __packed event;
+};
+
+union vring_desc;
+
+struct vring {
+ dma_addr_t pa;
+ volatile union vring_desc *va; /* vring_desc[size], WriteBack by DMA */
+ u16 size; /* number of vring_desc elements */
+ u32 swtail;
+ u32 swhead;
+ u32 hwtail; /* write here to inform hw */
+ void **ctx; /* void *ctx[size] - software context */
+};
+
+enum { /* for wil6210_priv.status */
+ wil_status_fwready = 0,
+ wil_status_fwconnected,
+ wil_status_dontscan,
+ wil_status_irqen, /* FIXME: interrupts enabled - for debug */
+};
+
+struct pci_dev;
+
+struct wil6210_stats {
+ u64 tsf;
+ u32 snr;
+ u16 last_mcs_rx;
+ u16 bf_mcs; /* last BF, used for Tx */
+ u16 my_rx_sector;
+ u16 my_tx_sector;
+ u16 peer_rx_sector;
+ u16 peer_tx_sector;
+};
+
+struct wil6210_priv {
+ struct pci_dev *pdev;
+ int n_msi;
+ struct wireless_dev *wdev;
+ void __iomem *csr;
+ ulong status;
+ /* profile */
+ u32 monitor_flags;
+ u32 secure_pcp; /* create secure PCP? */
+ int sinfo_gen;
+ /* cached ISR registers */
+ u32 isr_misc;
+ /* mailbox related */
+ struct mutex wmi_mutex;
+ struct wil6210_mbox_ctl mbox_ctl;
+ struct completion wmi_ready;
+ u16 wmi_seq;
+ u16 reply_id; /**< wait for this WMI event */
+ void *reply_buf;
+ u16 reply_size;
+ struct workqueue_struct *wmi_wq; /* for deferred calls */
+ struct work_struct wmi_event_worker;
+ struct workqueue_struct *wmi_wq_conn; /* for connect worker */
+ struct work_struct wmi_connect_worker;
+ struct work_struct disconnect_worker;
+ struct timer_list connect_timer;
+ int pending_connect_cid;
+ struct list_head pending_wmi_ev;
+ /*
+ * protect pending_wmi_ev
+ * - fill in IRQ from wil6210_irq_misc,
+ * - consumed in thread by wmi_event_worker
+ */
+ spinlock_t wmi_ev_lock;
+ /* DMA related */
+ struct vring vring_rx;
+ struct vring vring_tx[WIL6210_MAX_TX_RINGS];
+ u8 dst_addr[WIL6210_MAX_TX_RINGS][ETH_ALEN];
+ /* scan */
+ struct cfg80211_scan_request *scan_request;
+
+ struct mutex mutex; /* for wil6210_priv access in wil_{up|down} */
+ /* statistics */
+ struct wil6210_stats stats;
+ /* debugfs */
+ struct dentry *debug;
+ struct debugfs_blob_wrapper fw_code_blob;
+ struct debugfs_blob_wrapper fw_data_blob;
+ struct debugfs_blob_wrapper fw_peri_blob;
+ struct debugfs_blob_wrapper uc_code_blob;
+ struct debugfs_blob_wrapper uc_data_blob;
+ struct debugfs_blob_wrapper rgf_blob;
+};
+
+#define wil_to_wiphy(i) (i->wdev->wiphy)
+#define wil_to_dev(i) (wiphy_dev(wil_to_wiphy(i)))
+#define wiphy_to_wil(w) (struct wil6210_priv *)(wiphy_priv(w))
+#define wil_to_wdev(i) (i->wdev)
+#define wdev_to_wil(w) (struct wil6210_priv *)(wdev_priv(w))
+#define wil_to_ndev(i) (wil_to_wdev(i)->netdev)
+#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr))
+
+#define wil_dbg(wil, fmt, arg...) netdev_dbg(wil_to_ndev(wil), fmt, ##arg)
+#define wil_info(wil, fmt, arg...) netdev_info(wil_to_ndev(wil), fmt, ##arg)
+#define wil_err(wil, fmt, arg...) netdev_err(wil_to_ndev(wil), fmt, ##arg)
+
+#define wil_dbg_IRQ(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg)
+#define wil_dbg_TXRX(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg)
+#define wil_dbg_WMI(wil, fmt, arg...) wil_dbg(wil, "DBG[ WMI]" fmt, ##arg)
+
+#define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump_debug("DBG[TXRX]" prefix_str,\
+ prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define wil_hex_dump_WMI(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump_debug("DBG[ WMI]" prefix_str, \
+ prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
+ size_t count);
+void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
+ size_t count);
+
+void *wil_if_alloc(struct device *dev, void __iomem *csr);
+void wil_if_free(struct wil6210_priv *wil);
+int wil_if_add(struct wil6210_priv *wil);
+void wil_if_remove(struct wil6210_priv *wil);
+int wil_priv_init(struct wil6210_priv *wil);
+void wil_priv_deinit(struct wil6210_priv *wil);
+int wil_reset(struct wil6210_priv *wil);
+void wil_link_on(struct wil6210_priv *wil);
+void wil_link_off(struct wil6210_priv *wil);
+int wil_up(struct wil6210_priv *wil);
+int wil_down(struct wil6210_priv *wil);
+void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
+
+void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr);
+void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr);
+int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
+ struct wil6210_mbox_hdr *hdr);
+int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len);
+void wmi_recv_cmd(struct wil6210_priv *wil);
+int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
+ u16 reply_id, void *reply, u8 reply_size, int to_msec);
+void wmi_connect_worker(struct work_struct *work);
+void wmi_event_worker(struct work_struct *work);
+void wmi_event_flush(struct wil6210_priv *wil);
+int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid);
+int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid);
+int wmi_set_channel(struct wil6210_priv *wil, int channel);
+int wmi_get_channel(struct wil6210_priv *wil, int *channel);
+int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb);
+int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr);
+int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr, int key_len, const void *key);
+int wmi_echo(struct wil6210_priv *wil);
+int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
+
+int wil6210_init_irq(struct wil6210_priv *wil, int irq);
+void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
+void wil6210_disable_irq(struct wil6210_priv *wil);
+void wil6210_enable_irq(struct wil6210_priv *wil);
+
+int wil6210_debugfs_init(struct wil6210_priv *wil);
+void wil6210_debugfs_remove(struct wil6210_priv *wil);
+
+struct wireless_dev *wil_cfg80211_init(struct device *dev);
+void wil_wdev_free(struct wil6210_priv *wil);
+
+int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
+int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype);
+void wil6210_disconnect(struct wil6210_priv *wil, void *bssid);
+
+int wil_rx_init(struct wil6210_priv *wil);
+void wil_rx_fini(struct wil6210_priv *wil);
+
+/* TX API */
+int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
+ int cid, int tid);
+void wil_vring_fini_tx(struct wil6210_priv *wil, int id);
+
+netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+void wil_tx_complete(struct wil6210_priv *wil, int ringid);
+
+/* RX API */
+void wil_rx_handle(struct wil6210_priv *wil);
+
+int wil_iftype_nl2wmi(enum nl80211_iftype type);
+
+#endif /* __WIL6210_H__ */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
new file mode 100644
index 0000000..4139c3f
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -0,0 +1,989 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/etherdevice.h>
+
+#include "wil6210.h"
+#include "wmi.h"
+
+/**
+ * WMI event receiving - theory of operations
+ *
+ * When firmware about to report WMI event, it fills memory area
+ * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for
+ * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler.
+ *
+ * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the
+ * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up
+ * and handles events within the @wmi_event_worker. Every event get detached
+ * from list, processed and deleted.
+ *
+ * Purpose for this mechanism is to release IRQ thread; otherwise,
+ * if WMI event handling involves another WMI command flow, this 2-nd flow
+ * won't be completed because of blocked IRQ thread.
+ */
+
+/**
+ * Addressing - theory of operations
+ *
+ * There are several buses present on the WIL6210 card.
+ * Same memory areas are visible at different address on
+ * the different busses. There are 3 main bus masters:
+ * - MAC CPU (ucode)
+ * - User CPU (firmware)
+ * - AHB (host)
+ *
+ * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
+ * AHB addresses starting from 0x880000
+ *
+ * Internally, firmware uses addresses that allows faster access but
+ * are invisible from the host. To read from these addresses, alternative
+ * AHB address must be used.
+ *
+ * Memory mapping
+ * Linker address PCI/Host address
+ * 0x880000 .. 0xa80000 2Mb BAR0
+ * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM
+ * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH
+ */
+
+/**
+ * @fw_mapping provides memory remapping table
+ */
+static const struct {
+ u32 from; /* linker address - from, inclusive */
+ u32 to; /* linker address - to, exclusive */
+ u32 host; /* PCI/Host address - BAR0 + 0x880000 */
+} fw_mapping[] = {
+ {0x000000, 0x040000, 0x8c0000}, /* FW code RAM 256k */
+ {0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */
+ {0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */
+ {0x880000, 0x88a000, 0x880000}, /* various RGF */
+ {0x8c0000, 0x932000, 0x8c0000}, /* trivial mapping for upper area */
+ /*
+ * 920000..930000 ucode code RAM
+ * 930000..932000 ucode data RAM
+ */
+};
+
+/**
+ * return AHB address for given firmware/ucode internal (linker) address
+ * @x - internal address
+ * If address have no valid AHB mapping, return 0
+ */
+static u32 wmi_addr_remap(u32 x)
+{
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
+ if ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to))
+ return x + fw_mapping[i].host - fw_mapping[i].from;
+ }
+
+ return 0;
+}
+
+/**
+ * Check address validity for WMI buffer; remap if needed
+ * @ptr - internal (linker) fw/ucode address
+ *
+ * Valid buffer should be DWORD aligned
+ *
+ * return address for accessing buffer from the host;
+ * if buffer is not valid, return NULL.
+ */
+void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_)
+{
+ u32 off;
+ u32 ptr = le32_to_cpu(ptr_);
+
+ if (ptr % 4)
+ return NULL;
+
+ ptr = wmi_addr_remap(ptr);
+ if (ptr < WIL6210_FW_HOST_OFF)
+ return NULL;
+
+ off = HOSTADDR(ptr);
+ if (off > WIL6210_MEM_SIZE - 4)
+ return NULL;
+
+ return wil->csr + off;
+}
+
+/**
+ * Check address validity
+ */
+void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr)
+{
+ u32 off;
+
+ if (ptr % 4)
+ return NULL;
+
+ if (ptr < WIL6210_FW_HOST_OFF)
+ return NULL;
+
+ off = HOSTADDR(ptr);
+ if (off > WIL6210_MEM_SIZE - 4)
+ return NULL;
+
+ return wil->csr + off;
+}
+
+int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr,
+ struct wil6210_mbox_hdr *hdr)
+{
+ void __iomem *src = wmi_buffer(wil, ptr);
+ if (!src)
+ return -EINVAL;
+
+ wil_memcpy_fromio_32(hdr, src, sizeof(*hdr));
+
+ return 0;
+}
+
+static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
+{
+ struct {
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_hdr_wmi wmi;
+ } __packed cmd = {
+ .hdr = {
+ .type = WIL_MBOX_HDR_TYPE_WMI,
+ .flags = 0,
+ .len = cpu_to_le16(sizeof(cmd.wmi) + len),
+ },
+ .wmi = {
+ .id = cpu_to_le16(cmdid),
+ .info1 = 0,
+ },
+ };
+ struct wil6210_mbox_ring *r = &wil->mbox_ctl.tx;
+ struct wil6210_mbox_ring_desc d_head;
+ u32 next_head;
+ void __iomem *dst;
+ void __iomem *head = wmi_addr(wil, r->head);
+ uint retry;
+
+ if (sizeof(cmd) + len > r->entry_size) {
+ wil_err(wil, "WMI size too large: %d bytes, max is %d\n",
+ (int)(sizeof(cmd) + len), r->entry_size);
+ return -ERANGE;
+
+ }
+
+ might_sleep();
+
+ if (!test_bit(wil_status_fwready, &wil->status)) {
+ wil_err(wil, "FW not ready\n");
+ return -EAGAIN;
+ }
+
+ if (!head) {
+ wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head);
+ return -EINVAL;
+ }
+ /* read Tx head till it is not busy */
+ for (retry = 5; retry > 0; retry--) {
+ wil_memcpy_fromio_32(&d_head, head, sizeof(d_head));
+ if (d_head.sync == 0)
+ break;
+ msleep(20);
+ }
+ if (d_head.sync != 0) {
+ wil_err(wil, "WMI head busy\n");
+ return -EBUSY;
+ }
+ /* next head */
+ next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size);
+ wil_dbg_WMI(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head);
+ /* wait till FW finish with previous command */
+ for (retry = 5; retry > 0; retry--) {
+ r->tail = ioread32(wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx.tail));
+ if (next_head != r->tail)
+ break;
+ msleep(20);
+ }
+ if (next_head == r->tail) {
+ wil_err(wil, "WMI ring full\n");
+ return -EBUSY;
+ }
+ dst = wmi_buffer(wil, d_head.addr);
+ if (!dst) {
+ wil_err(wil, "invalid WMI buffer: 0x%08x\n",
+ le32_to_cpu(d_head.addr));
+ return -EINVAL;
+ }
+ cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq);
+ /* set command */
+ wil_dbg_WMI(wil, "WMI command 0x%04x [%d]\n", cmdid, len);
+ wil_hex_dump_WMI("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd,
+ sizeof(cmd), true);
+ wil_hex_dump_WMI("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf,
+ len, true);
+ wil_memcpy_toio_32(dst, &cmd, sizeof(cmd));
+ wil_memcpy_toio_32(dst + sizeof(cmd), buf, len);
+ /* mark entry as full */
+ iowrite32(1, wil->csr + HOSTADDR(r->head) +
+ offsetof(struct wil6210_mbox_ring_desc, sync));
+ /* advance next ptr */
+ iowrite32(r->head = next_head, wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, tx.head));
+
+ /* interrupt to FW */
+ iowrite32(SW_INT_MBOX, wil->csr + HOST_SW_INT);
+
+ return 0;
+}
+
+int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
+{
+ int rc;
+
+ mutex_lock(&wil->wmi_mutex);
+ rc = __wmi_send(wil, cmdid, buf, len);
+ mutex_unlock(&wil->wmi_mutex);
+
+ return rc;
+}
+
+/*=== Event handlers ===*/
+static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct wmi_ready_event *evt = d;
+ u32 ver = le32_to_cpu(evt->sw_version);
+
+ wil_dbg_WMI(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac);
+
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ memcpy(ndev->dev_addr, evt->mac, ETH_ALEN);
+ memcpy(ndev->perm_addr, evt->mac, ETH_ALEN);
+ }
+ snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version),
+ "%d", ver);
+}
+
+static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
+ int len)
+{
+ wil_dbg_WMI(wil, "WMI: FW ready\n");
+
+ set_bit(wil_status_fwready, &wil->status);
+ /* reuse wmi_ready for the firmware ready indication */
+ complete(&wil->wmi_ready);
+}
+
+static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct wmi_rx_mgmt_packet_event *data = d;
+ struct wiphy *wiphy = wil_to_wiphy(wil);
+ struct ieee80211_mgmt *rx_mgmt_frame =
+ (struct ieee80211_mgmt *)data->payload;
+ int ch_no = data->info.channel+1;
+ u32 freq = ieee80211_channel_to_frequency(ch_no,
+ IEEE80211_BAND_60GHZ);
+ struct ieee80211_channel *channel = ieee80211_get_channel(wiphy, freq);
+ /* TODO convert LE to CPU */
+ s32 signal = 0; /* TODO */
+ __le16 fc = rx_mgmt_frame->frame_control;
+ u32 d_len = le32_to_cpu(data->info.len);
+ u16 d_status = le16_to_cpu(data->info.status);
+
+ wil_dbg_WMI(wil, "MGMT: channel %d MCS %d SNR %d\n",
+ data->info.channel, data->info.mcs, data->info.snr);
+ wil_dbg_WMI(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len,
+ le16_to_cpu(data->info.stype));
+ wil_dbg_WMI(wil, "qid %d mid %d cid %d\n",
+ data->info.qid, data->info.mid, data->info.cid);
+
+ if (!channel) {
+ wil_err(wil, "Frame on unsupported channel\n");
+ return;
+ }
+
+ if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) {
+ struct cfg80211_bss *bss;
+ u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp);
+ u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info);
+ u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int);
+ const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable;
+ size_t ie_len = d_len - offsetof(struct ieee80211_mgmt,
+ u.beacon.variable);
+ wil_dbg_WMI(wil, "Capability info : 0x%04x\n", cap);
+ /* Hack to work around wrong cap. info TODO: remove when fixed*/
+ if (!(cap & WLAN_CAPABILITY_ESS)) {
+ wil_dbg_WMI(wil, "No ESS bit in capabitity. Set it.\n");
+ cap |= WLAN_CAPABILITY_ESS;
+ }
+ if (cap & WLAN_CAPABILITY_IBSS) {
+ wil_dbg_WMI(wil, "IBSS bit in capabitity. Clear it.\n");
+ cap &= ~WLAN_CAPABILITY_IBSS;
+ }
+ /* FIXME: remove when fixed in FW
+ * Set "privacy" capability if RSN IE present
+ */
+ if (cfg80211_find_ie(WLAN_EID_RSN, ie_buf, ie_len))
+ cap |= WLAN_CAPABILITY_PRIVACY;
+
+ bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid,
+ tsf, cap, bi, ie_buf, ie_len,
+ signal, GFP_KERNEL);
+ if (bss) {
+ wil_dbg_WMI(wil, "Added BSS %pM\n",
+ rx_mgmt_frame->bssid);
+ cfg80211_put_bss(bss);
+ } else {
+ wil_err(wil, "cfg80211_inform_bss() failed\n");
+ }
+ }
+}
+
+static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ if (wil->scan_request) {
+ struct wmi_scan_complete_event *data = d;
+ bool aborted = (data->status != 0);
+
+ wil_dbg_WMI(wil, "SCAN_COMPLETE(0x%08x)\n", data->status);
+ cfg80211_scan_done(wil->scan_request, aborted);
+ wil->scan_request = NULL;
+ } else {
+ wil_err(wil, "SCAN_COMPLETE while not scanning\n");
+ }
+}
+
+static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil->wdev;
+ struct wmi_connect_event *evt = d;
+ int ch; /* channel number */
+ struct station_info sinfo;
+ u8 *assoc_req_ie, *assoc_resp_ie;
+ size_t assoc_req_ielen, assoc_resp_ielen;
+ /* capinfo(u16) + listen_interval(u16) + IEs */
+ const size_t assoc_req_ie_offset = sizeof(u16) * 2;
+ /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */
+ const size_t assoc_resp_ie_offset = sizeof(u16) * 3;
+
+ if (len < sizeof(*evt)) {
+ wil_err(wil, "Connect event too short : %d bytes\n", len);
+ return;
+ }
+ if (len != sizeof(*evt) + evt->beacon_ie_len + evt->assoc_req_len +
+ evt->assoc_resp_len) {
+ wil_err(wil,
+ "Connect event corrupted : %d != %d + %d + %d + %d\n",
+ len, (int)sizeof(*evt), evt->beacon_ie_len,
+ evt->assoc_req_len, evt->assoc_resp_len);
+ return;
+ }
+ ch = evt->channel + 1;
+ wil_dbg_WMI(wil, "Connect %pM channel [%d] cid %d\n",
+ evt->bssid, ch, evt->cid);
+ wil_hex_dump_WMI("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1,
+ evt->assoc_info, len - sizeof(*evt), true);
+
+ /* figure out IE's */
+ assoc_req_ie = &evt->assoc_info[evt->beacon_ie_len +
+ assoc_req_ie_offset];
+ assoc_req_ielen = evt->assoc_req_len - assoc_req_ie_offset;
+ if (evt->assoc_req_len <= assoc_req_ie_offset) {
+ assoc_req_ie = NULL;
+ assoc_req_ielen = 0;
+ }
+
+ assoc_resp_ie = &evt->assoc_info[evt->beacon_ie_len +
+ evt->assoc_req_len +
+ assoc_resp_ie_offset];
+ assoc_resp_ielen = evt->assoc_resp_len - assoc_resp_ie_offset;
+ if (evt->assoc_resp_len <= assoc_resp_ie_offset) {
+ assoc_resp_ie = NULL;
+ assoc_resp_ielen = 0;
+ }
+
+ if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
+ (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
+ if (wdev->sme_state != CFG80211_SME_CONNECTING) {
+ wil_err(wil, "Not in connecting state\n");
+ return;
+ }
+ del_timer_sync(&wil->connect_timer);
+ cfg80211_connect_result(ndev, evt->bssid,
+ assoc_req_ie, assoc_req_ielen,
+ assoc_resp_ie, assoc_resp_ielen,
+ WLAN_STATUS_SUCCESS, GFP_KERNEL);
+
+ } else if ((wdev->iftype == NL80211_IFTYPE_AP) ||
+ (wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+ memset(&sinfo, 0, sizeof(sinfo));
+
+ sinfo.generation = wil->sinfo_gen++;
+
+ if (assoc_req_ie) {
+ sinfo.assoc_req_ies = assoc_req_ie;
+ sinfo.assoc_req_ies_len = assoc_req_ielen;
+ sinfo.filled |= STATION_INFO_ASSOC_REQ_IES;
+ }
+
+ cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL);
+ }
+ set_bit(wil_status_fwconnected, &wil->status);
+
+ /* FIXME FW can transmit only ucast frames to peer */
+ /* FIXME real ring_id instead of hard coded 0 */
+ memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN);
+
+ wil->pending_connect_cid = evt->cid;
+ queue_work(wil->wmi_wq_conn, &wil->wmi_connect_worker);
+}
+
+static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ struct wmi_disconnect_event *evt = d;
+
+ wil_dbg_WMI(wil, "Disconnect %pM reason %d proto %d wmi\n",
+ evt->bssid,
+ evt->protocol_reason_status, evt->disconnect_reason);
+
+ wil->sinfo_gen++;
+
+ wil6210_disconnect(wil, evt->bssid);
+ clear_bit(wil_status_dontscan, &wil->status);
+}
+
+static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct wmi_notify_req_done_event *evt = d;
+
+ if (len < sizeof(*evt)) {
+ wil_err(wil, "Short NOTIFY event\n");
+ return;
+ }
+
+ wil->stats.tsf = le64_to_cpu(evt->tsf);
+ wil->stats.snr = le32_to_cpu(evt->snr_val);
+ wil->stats.bf_mcs = le16_to_cpu(evt->bf_mcs);
+ wil->stats.my_rx_sector = le16_to_cpu(evt->my_rx_sector);
+ wil->stats.my_tx_sector = le16_to_cpu(evt->my_tx_sector);
+ wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector);
+ wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector);
+ wil_dbg_WMI(wil, "Link status, MCS %d TSF 0x%016llx\n"
+ "BF status 0x%08x SNR 0x%08x\n"
+ "Tx Tpt %d goodput %d Rx goodput %d\n"
+ "Sectors(rx:tx) my %d:%d peer %d:%d\n",
+ wil->stats.bf_mcs, wil->stats.tsf, evt->status,
+ wil->stats.snr, le32_to_cpu(evt->tx_tpt),
+ le32_to_cpu(evt->tx_goodput), le32_to_cpu(evt->rx_goodput),
+ wil->stats.my_rx_sector, wil->stats.my_tx_sector,
+ wil->stats.peer_rx_sector, wil->stats.peer_tx_sector);
+}
+
+/*
+ * Firmware reports EAPOL frame using WME event.
+ * Reconstruct Ethernet frame and deliver it via normal Rx
+ */
+static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wmi_eapol_rx_event *evt = d;
+ u16 eapol_len = le16_to_cpu(evt->eapol_len);
+ int sz = eapol_len + ETH_HLEN;
+ struct sk_buff *skb;
+ struct ethhdr *eth;
+
+ wil_dbg_WMI(wil, "EAPOL len %d from %pM\n", eapol_len,
+ evt->src_mac);
+
+ if (eapol_len > 196) { /* TODO: revisit size limit */
+ wil_err(wil, "EAPOL too large\n");
+ return;
+ }
+
+ skb = alloc_skb(sz, GFP_KERNEL);
+ if (!skb) {
+ wil_err(wil, "Failed to allocate skb\n");
+ return;
+ }
+ eth = (struct ethhdr *)skb_put(skb, ETH_HLEN);
+ memcpy(eth->h_dest, ndev->dev_addr, ETH_ALEN);
+ memcpy(eth->h_source, evt->src_mac, ETH_ALEN);
+ eth->h_proto = cpu_to_be16(ETH_P_PAE);
+ memcpy(skb_put(skb, eapol_len), evt->eapol, eapol_len);
+ skb->protocol = eth_type_trans(skb, ndev);
+ if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) {
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += skb->len;
+ } else {
+ ndev->stats.rx_dropped++;
+ }
+}
+
+static const struct {
+ int eventid;
+ void (*handler)(struct wil6210_priv *wil, int eventid,
+ void *data, int data_len);
+} wmi_evt_handlers[] = {
+ {WMI_READY_EVENTID, wmi_evt_ready},
+ {WMI_FW_READY_EVENTID, wmi_evt_fw_ready},
+ {WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt},
+ {WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete},
+ {WMI_CONNECT_EVENTID, wmi_evt_connect},
+ {WMI_DISCONNECT_EVENTID, wmi_evt_disconnect},
+ {WMI_NOTIFY_REQ_DONE_EVENTID, wmi_evt_notify},
+ {WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx},
+};
+
+/*
+ * Run in IRQ context
+ * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev
+ * that will be eventually handled by the @wmi_event_worker in the thread
+ * context of thread "wil6210_wmi"
+ */
+void wmi_recv_cmd(struct wil6210_priv *wil)
+{
+ struct wil6210_mbox_ring_desc d_tail;
+ struct wil6210_mbox_hdr hdr;
+ struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx;
+ struct pending_wmi_event *evt;
+ u8 *cmd;
+ void __iomem *src;
+ ulong flags;
+
+ for (;;) {
+ u16 len;
+
+ r->head = ioread32(wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx.head));
+ if (r->tail == r->head)
+ return;
+
+ /* read cmd from tail */
+ wil_memcpy_fromio_32(&d_tail, wil->csr + HOSTADDR(r->tail),
+ sizeof(struct wil6210_mbox_ring_desc));
+ if (d_tail.sync == 0) {
+ wil_err(wil, "Mbox evt not owned by FW?\n");
+ return;
+ }
+
+ if (0 != wmi_read_hdr(wil, d_tail.addr, &hdr)) {
+ wil_err(wil, "Mbox evt at 0x%08x?\n",
+ le32_to_cpu(d_tail.addr));
+ return;
+ }
+
+ len = le16_to_cpu(hdr.len);
+ src = wmi_buffer(wil, d_tail.addr) +
+ sizeof(struct wil6210_mbox_hdr);
+ evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event,
+ event.wmi) + len, 4),
+ GFP_KERNEL);
+ if (!evt) {
+ wil_err(wil, "kmalloc for WMI event (%d) failed\n",
+ len);
+ return;
+ }
+ evt->event.hdr = hdr;
+ cmd = (void *)&evt->event.wmi;
+ wil_memcpy_fromio_32(cmd, src, len);
+ /* mark entry as empty */
+ iowrite32(0, wil->csr + HOSTADDR(r->tail) +
+ offsetof(struct wil6210_mbox_ring_desc, sync));
+ /* indicate */
+ wil_dbg_WMI(wil, "Mbox evt %04x %04x %04x %02x\n",
+ le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type),
+ hdr.flags);
+ if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) &&
+ (len >= sizeof(struct wil6210_mbox_hdr_wmi))) {
+ wil_dbg_WMI(wil, "WMI event 0x%04x\n",
+ evt->event.wmi.id);
+ }
+ wil_hex_dump_WMI("evt ", DUMP_PREFIX_OFFSET, 16, 1,
+ &evt->event.hdr, sizeof(hdr) + len, true);
+
+ /* advance tail */
+ r->tail = r->base + ((r->tail - r->base +
+ sizeof(struct wil6210_mbox_ring_desc)) % r->size);
+ iowrite32(r->tail, wil->csr + HOST_MBOX +
+ offsetof(struct wil6210_mbox_ctl, rx.tail));
+
+ /* add to the pending list */
+ spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+ list_add_tail(&evt->list, &wil->pending_wmi_ev);
+ spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+ {
+ int q = queue_work(wil->wmi_wq,
+ &wil->wmi_event_worker);
+ wil_dbg_WMI(wil, "queue_work -> %d\n", q);
+ }
+ }
+}
+
+int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
+ u16 reply_id, void *reply, u8 reply_size, int to_msec)
+{
+ int rc;
+ int remain;
+
+ mutex_lock(&wil->wmi_mutex);
+
+ rc = __wmi_send(wil, cmdid, buf, len);
+ if (rc)
+ goto out;
+
+ wil->reply_id = reply_id;
+ wil->reply_buf = reply;
+ wil->reply_size = reply_size;
+ remain = wait_for_completion_timeout(&wil->wmi_ready,
+ msecs_to_jiffies(to_msec));
+ if (0 == remain) {
+ wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n",
+ cmdid, reply_id, to_msec);
+ rc = -ETIME;
+ } else {
+ wil_dbg_WMI(wil,
+ "wmi_call(0x%04x->0x%04x) completed in %d msec\n",
+ cmdid, reply_id,
+ to_msec - jiffies_to_msecs(remain));
+ }
+ wil->reply_id = 0;
+ wil->reply_buf = NULL;
+ wil->reply_size = 0;
+ out:
+ mutex_unlock(&wil->wmi_mutex);
+
+ return rc;
+}
+
+int wmi_echo(struct wil6210_priv *wil)
+{
+ struct wmi_echo_cmd cmd = {
+ .value = cpu_to_le32(0x12345678),
+ };
+
+ return wmi_call(wil, WMI_ECHO_CMDID, &cmd, sizeof(cmd),
+ WMI_ECHO_RSP_EVENTID, NULL, 0, 20);
+}
+
+int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
+{
+ struct wmi_set_mac_address_cmd cmd;
+
+ memcpy(cmd.mac, addr, ETH_ALEN);
+
+ wil_dbg_WMI(wil, "Set MAC %pM\n", addr);
+
+ return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype)
+{
+ struct wmi_bcon_ctrl_cmd cmd = {
+ .bcon_interval = cpu_to_le16(bi),
+ .network_type = wmi_nettype,
+ .disable_sec_offload = 1,
+ };
+
+ if (!wil->secure_pcp)
+ cmd.disable_sec = 1;
+
+ return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid)
+{
+ struct wmi_set_ssid_cmd cmd = {
+ .ssid_len = cpu_to_le32(ssid_len),
+ };
+
+ if (ssid_len > sizeof(cmd.ssid))
+ return -EINVAL;
+
+ memcpy(cmd.ssid, ssid, ssid_len);
+
+ return wmi_send(wil, WMI_SET_SSID_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid)
+{
+ int rc;
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_set_ssid_cmd cmd;
+ } __packed reply;
+ int len; /* reply.cmd.ssid_len in CPU order */
+
+ rc = wmi_call(wil, WMI_GET_SSID_CMDID, NULL, 0, WMI_GET_SSID_EVENTID,
+ &reply, sizeof(reply), 20);
+ if (rc)
+ return rc;
+
+ len = le32_to_cpu(reply.cmd.ssid_len);
+ if (len > sizeof(reply.cmd.ssid))
+ return -EINVAL;
+
+ *ssid_len = len;
+ memcpy(ssid, reply.cmd.ssid, len);
+
+ return 0;
+}
+
+int wmi_set_channel(struct wil6210_priv *wil, int channel)
+{
+ struct wmi_set_pcp_channel_cmd cmd = {
+ .channel = channel - 1,
+ };
+
+ return wmi_send(wil, WMI_SET_PCP_CHANNEL_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_get_channel(struct wil6210_priv *wil, int *channel)
+{
+ int rc;
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_set_pcp_channel_cmd cmd;
+ } __packed reply;
+
+ rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, NULL, 0,
+ WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20);
+ if (rc)
+ return rc;
+
+ if (reply.cmd.channel > 3)
+ return -EINVAL;
+
+ *channel = reply.cmd.channel + 1;
+
+ return 0;
+}
+
+int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb)
+{
+ struct wmi_eapol_tx_cmd *cmd;
+ struct ethhdr *eth;
+ u16 eapol_len = skb->len - ETH_HLEN;
+ void *eapol = skb->data + ETH_HLEN;
+ uint i;
+ int rc;
+
+ skb_set_mac_header(skb, 0);
+ eth = eth_hdr(skb);
+ wil_dbg_WMI(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest);
+ for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) {
+ if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0)
+ goto found_dest;
+ }
+
+ return -EINVAL;
+
+ found_dest:
+ /* find out eapol data & len */
+ cmd = kzalloc(sizeof(*cmd) + eapol_len, GFP_KERNEL);
+ if (!cmd)
+ return -EINVAL;
+
+ memcpy(cmd->dst_mac, eth->h_dest, ETH_ALEN);
+ cmd->eapol_len = cpu_to_le16(eapol_len);
+ memcpy(cmd->eapol, eapol, eapol_len);
+ rc = wmi_send(wil, WMI_EAPOL_TX_CMDID, cmd, sizeof(*cmd) + eapol_len);
+ kfree(cmd);
+
+ return rc;
+}
+
+int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr)
+{
+ struct wmi_delete_cipher_key_cmd cmd = {
+ .key_index = key_index,
+ };
+
+ if (mac_addr)
+ memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
+
+ return wmi_send(wil, WMI_DELETE_CIPHER_KEY_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
+ const void *mac_addr, int key_len, const void *key)
+{
+ struct wmi_add_cipher_key_cmd cmd = {
+ .key_index = key_index,
+ .key_usage = WMI_KEY_USE_PAIRWISE,
+ .key_len = key_len,
+ };
+
+ if (!key || (key_len > sizeof(cmd.key)))
+ return -EINVAL;
+
+ memcpy(cmd.key, key, key_len);
+ if (mac_addr)
+ memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
+
+ return wmi_send(wil, WMI_ADD_CIPHER_KEY_CMDID, &cmd, sizeof(cmd));
+}
+
+int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie)
+{
+ int rc;
+ u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len;
+ struct wmi_set_appie_cmd *cmd = kzalloc(len, GFP_KERNEL);
+ if (!cmd) {
+ wil_err(wil, "kmalloc(%d) failed\n", len);
+ return -ENOMEM;
+ }
+
+ cmd->mgmt_frm_type = type;
+ /* BUG: FW API define ieLen as u8. Will fix FW */
+ cmd->ie_len = cpu_to_le16(ie_len);
+ memcpy(cmd->ie_info, ie, ie_len);
+ rc = wmi_send(wil, WMI_SET_APPIE_CMDID, &cmd, len);
+ kfree(cmd);
+
+ return rc;
+}
+
+void wmi_event_flush(struct wil6210_priv *wil)
+{
+ struct pending_wmi_event *evt, *t;
+
+ wil_dbg_WMI(wil, "%s()\n", __func__);
+
+ list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) {
+ list_del(&evt->list);
+ kfree(evt);
+ }
+}
+
+static bool wmi_evt_call_handler(struct wil6210_priv *wil, int id,
+ void *d, int len)
+{
+ uint i;
+
+ for (i = 0; i < ARRAY_SIZE(wmi_evt_handlers); i++) {
+ if (wmi_evt_handlers[i].eventid == id) {
+ wmi_evt_handlers[i].handler(wil, id, d, len);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static void wmi_event_handle(struct wil6210_priv *wil,
+ struct wil6210_mbox_hdr *hdr)
+{
+ u16 len = le16_to_cpu(hdr->len);
+
+ if ((hdr->type == WIL_MBOX_HDR_TYPE_WMI) &&
+ (len >= sizeof(struct wil6210_mbox_hdr_wmi))) {
+ struct wil6210_mbox_hdr_wmi *wmi = (void *)(&hdr[1]);
+ void *evt_data = (void *)(&wmi[1]);
+ u16 id = le16_to_cpu(wmi->id);
+ /* check if someone waits for this event */
+ if (wil->reply_id && wil->reply_id == id) {
+ if (wil->reply_buf) {
+ memcpy(wil->reply_buf, wmi,
+ min(len, wil->reply_size));
+ } else {
+ wmi_evt_call_handler(wil, id, evt_data,
+ len - sizeof(*wmi));
+ }
+ wil_dbg_WMI(wil, "Complete WMI 0x%04x\n", id);
+ complete(&wil->wmi_ready);
+ return;
+ }
+ /* unsolicited event */
+ /* search for handler */
+ if (!wmi_evt_call_handler(wil, id, evt_data,
+ len - sizeof(*wmi))) {
+ wil_err(wil, "Unhandled event 0x%04x\n", id);
+ }
+ } else {
+ wil_err(wil, "Unknown event type\n");
+ print_hex_dump(KERN_ERR, "evt?? ", DUMP_PREFIX_OFFSET, 16, 1,
+ hdr, sizeof(*hdr) + len, true);
+ }
+}
+
+/*
+ * Retrieve next WMI event from the pending list
+ */
+static struct list_head *next_wmi_ev(struct wil6210_priv *wil)
+{
+ ulong flags;
+ struct list_head *ret = NULL;
+
+ spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+
+ if (!list_empty(&wil->pending_wmi_ev)) {
+ ret = wil->pending_wmi_ev.next;
+ list_del(ret);
+ }
+
+ spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+
+ return ret;
+}
+
+/*
+ * Handler for the WMI events
+ */
+void wmi_event_worker(struct work_struct *work)
+{
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ wmi_event_worker);
+ struct pending_wmi_event *evt;
+ struct list_head *lh;
+
+ while ((lh = next_wmi_ev(wil)) != NULL) {
+ evt = list_entry(lh, struct pending_wmi_event, list);
+ wmi_event_handle(wil, &evt->event.hdr);
+ kfree(evt);
+ }
+}
+
+void wmi_connect_worker(struct work_struct *work)
+{
+ int rc;
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ wmi_connect_worker);
+
+ if (wil->pending_connect_cid < 0) {
+ wil_err(wil, "No connection pending\n");
+ return;
+ }
+
+ wil_dbg_WMI(wil, "Configure for connection CID %d\n",
+ wil->pending_connect_cid);
+
+ rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE,
+ wil->pending_connect_cid, 0);
+ wil->pending_connect_cid = -1;
+ if (rc == 0)
+ wil_link_on(wil);
+}
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
new file mode 100644
index 0000000..3bbf875
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -0,0 +1,1116 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2006-2012 Wilocity .
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI) for the Wilocity
+ * MARLON 60 Gigabit wireless solution.
+ * It includes definitions of all the commands and events.
+ * Commands are messages from the host to the WM.
+ * Events are messages from the WM to the host.
+ */
+
+#ifndef __WILOCITY_WMI_H__
+#define __WILOCITY_WMI_H__
+
+/* General */
+
+#define WMI_MAC_LEN (6)
+#define WMI_PROX_RANGE_NUM (3)
+
+/* List of Commands */
+enum wmi_command_id {
+ WMI_CONNECT_CMDID = 0x0001,
+ WMI_DISCONNECT_CMDID = 0x0003,
+ WMI_START_SCAN_CMDID = 0x0007,
+ WMI_SET_BSS_FILTER_CMDID = 0x0009,
+ WMI_SET_PROBED_SSID_CMDID = 0x000a,
+ WMI_SET_LISTEN_INT_CMDID = 0x000b,
+ WMI_BCON_CTRL_CMDID = 0x000f,
+ WMI_ADD_CIPHER_KEY_CMDID = 0x0016,
+ WMI_DELETE_CIPHER_KEY_CMDID = 0x0017,
+ WMI_SET_APPIE_CMDID = 0x003f,
+ WMI_GET_APPIE_CMDID = 0x0040,
+ WMI_SET_WSC_STATUS_CMDID = 0x0041,
+ WMI_PXMT_RANGE_CFG_CMDID = 0x0042,
+ WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x0043,
+ WMI_FAST_MEM_ACC_MODE_CMDID = 0x0300,
+ WMI_MEM_READ_CMDID = 0x0800,
+ WMI_MEM_WR_CMDID = 0x0801,
+ WMI_ECHO_CMDID = 0x0803,
+ WMI_DEEP_ECHO_CMDID = 0x0804,
+ WMI_CONFIG_MAC_CMDID = 0x0805,
+ WMI_CONFIG_PHY_DEBUG_CMDID = 0x0806,
+ WMI_ADD_STATION_CMDID = 0x0807,
+ WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x0808,
+ WMI_PHY_GET_STATISTICS_CMDID = 0x0809,
+ WMI_FS_TUNE_CMDID = 0x080a,
+ WMI_CORR_MEASURE_CMDID = 0x080b,
+ WMI_TEMP_SENSE_CMDID = 0x080e,
+ WMI_DC_CALIB_CMDID = 0x080f,
+ WMI_SEND_TONE_CMDID = 0x0810,
+ WMI_IQ_TX_CALIB_CMDID = 0x0811,
+ WMI_IQ_RX_CALIB_CMDID = 0x0812,
+ WMI_SET_UCODE_IDLE_CMDID = 0x0813,
+ WMI_SET_WORK_MODE_CMDID = 0x0815,
+ WMI_LO_LEAKAGE_CALIB_CMDID = 0x0816,
+ WMI_MARLON_R_ACTIVATE_CMDID = 0x0817,
+ WMI_MARLON_R_READ_CMDID = 0x0818,
+ WMI_MARLON_R_WRITE_CMDID = 0x0819,
+ WMI_MARLON_R_TXRX_SEL_CMDID = 0x081a,
+ MAC_IO_STATIC_PARAMS_CMDID = 0x081b,
+ MAC_IO_DYNAMIC_PARAMS_CMDID = 0x081c,
+ WMI_SILENT_RSSI_CALIB_CMDID = 0x081d,
+ WMI_CFG_RX_CHAIN_CMDID = 0x0820,
+ WMI_VRING_CFG_CMDID = 0x0821,
+ WMI_RX_ON_CMDID = 0x0822,
+ WMI_VRING_BA_EN_CMDID = 0x0823,
+ WMI_VRING_BA_DIS_CMDID = 0x0824,
+ WMI_RCP_ADDBA_RESP_CMDID = 0x0825,
+ WMI_RCP_DELBA_CMDID = 0x0826,
+ WMI_SET_SSID_CMDID = 0x0827,
+ WMI_GET_SSID_CMDID = 0x0828,
+ WMI_SET_PCP_CHANNEL_CMDID = 0x0829,
+ WMI_GET_PCP_CHANNEL_CMDID = 0x082a,
+ WMI_SW_TX_REQ_CMDID = 0x082b,
+ WMI_RX_OFF_CMDID = 0x082c,
+ WMI_READ_MAC_RXQ_CMDID = 0x0830,
+ WMI_READ_MAC_TXQ_CMDID = 0x0831,
+ WMI_WRITE_MAC_RXQ_CMDID = 0x0832,
+ WMI_WRITE_MAC_TXQ_CMDID = 0x0833,
+ WMI_WRITE_MAC_XQ_FIELD_CMDID = 0x0834,
+ WMI_MLME_PUSH_CMDID = 0x0835,
+ WMI_BEAMFORMING_MGMT_CMDID = 0x0836,
+ WMI_BF_TXSS_MGMT_CMDID = 0x0837,
+ WMI_BF_SM_MGMT_CMDID = 0x0838,
+ WMI_BF_RXSS_MGMT_CMDID = 0x0839,
+ WMI_SET_SECTORS_CMDID = 0x0849,
+ WMI_MAINTAIN_PAUSE_CMDID = 0x0850,
+ WMI_MAINTAIN_RESUME_CMDID = 0x0851,
+ WMI_RS_MGMT_CMDID = 0x0852,
+ WMI_RF_MGMT_CMDID = 0x0853,
+ /* Performance monitoring commands */
+ WMI_BF_CTRL_CMDID = 0x0862,
+ WMI_NOTIFY_REQ_CMDID = 0x0863,
+ WMI_GET_STATUS_CMDID = 0x0864,
+ WMI_UNIT_TEST_CMDID = 0x0900,
+ WMI_HICCUP_CMDID = 0x0901,
+ WMI_FLASH_READ_CMDID = 0x0902,
+ WMI_FLASH_WRITE_CMDID = 0x0903,
+ WMI_SECURITY_UNIT_TEST_CMDID = 0x0904,
+
+ WMI_SET_MAC_ADDRESS_CMDID = 0xf003,
+ WMI_ABORT_SCAN_CMDID = 0xf007,
+ WMI_SET_PMK_CMDID = 0xf028,
+
+ WMI_SET_PROMISCUOUS_MODE_CMDID = 0xf041,
+ WMI_GET_PMK_CMDID = 0xf048,
+ WMI_SET_PASSPHRASE_CMDID = 0xf049,
+ WMI_SEND_ASSOC_RES_CMDID = 0xf04a,
+ WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xf04b,
+ WMI_EAPOL_TX_CMDID = 0xf04c,
+ WMI_MAC_ADDR_REQ_CMDID = 0xf04d,
+ WMI_FW_VER_CMDID = 0xf04e,
+};
+
+/*
+ * Commands data structures
+ */
+
+/*
+ * Frame Types
+ */
+enum wmi_mgmt_frame_type {
+ WMI_FRAME_BEACON = 0,
+ WMI_FRAME_PROBE_REQ = 1,
+ WMI_FRAME_PROBE_RESP = 2,
+ WMI_FRAME_ASSOC_REQ = 3,
+ WMI_FRAME_ASSOC_RESP = 4,
+ WMI_NUM_MGMT_FRAME,
+};
+
+/*
+ * WMI_CONNECT_CMDID
+ */
+enum wmi_network_type {
+ WMI_NETTYPE_INFRA = 0x01,
+ WMI_NETTYPE_ADHOC = 0x02,
+ WMI_NETTYPE_ADHOC_CREATOR = 0x04,
+ WMI_NETTYPE_AP = 0x10,
+ WMI_NETTYPE_P2P = 0x20,
+ WMI_NETTYPE_WBE = 0x40, /* PCIE over 60g */
+};
+
+enum wmi_dot11_auth_mode {
+ WMI_AUTH11_OPEN = 0x01,
+ WMI_AUTH11_SHARED = 0x02,
+ WMI_AUTH11_LEAP = 0x04,
+ WMI_AUTH11_WSC = 0x08,
+};
+
+enum wmi_auth_mode {
+ WMI_AUTH_NONE = 0x01,
+ WMI_AUTH_WPA = 0x02,
+ WMI_AUTH_WPA2 = 0x04,
+ WMI_AUTH_WPA_PSK = 0x08,
+ WMI_AUTH_WPA2_PSK = 0x10,
+ WMI_AUTH_WPA_CCKM = 0x20,
+ WMI_AUTH_WPA2_CCKM = 0x40,
+};
+
+enum wmi_crypto_type {
+ WMI_CRYPT_NONE = 0x01,
+ WMI_CRYPT_WEP = 0x02,
+ WMI_CRYPT_TKIP = 0x04,
+ WMI_CRYPT_AES = 0x08,
+ WMI_CRYPT_AES_GCMP = 0x20,
+};
+
+
+enum wmi_connect_ctrl_flag_bits {
+ WMI_CONNECT_ASSOC_POLICY_USER = 0x0001,
+ WMI_CONNECT_SEND_REASSOC = 0x0002,
+ WMI_CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+ WMI_CONNECT_PROFILE_MATCH_DONE = 0x0008,
+ WMI_CONNECT_IGNORE_AAC_BEACON = 0x0010,
+ WMI_CONNECT_CSA_FOLLOW_BSS = 0x0020,
+ WMI_CONNECT_DO_WPA_OFFLOAD = 0x0040,
+ WMI_CONNECT_DO_NOT_DEAUTH = 0x0080,
+};
+
+#define WMI_MAX_SSID_LEN (32)
+
+struct wmi_connect_cmd {
+ u8 network_type;
+ u8 dot11_auth_mode;
+ u8 auth_mode;
+ u8 pairwise_crypto_type;
+ u8 pairwise_crypto_len;
+ u8 group_crypto_type;
+ u8 group_crypto_len;
+ u8 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+ u8 channel;
+ u8 reserved0;
+ u8 bssid[WMI_MAC_LEN];
+ __le32 ctrl_flags;
+ u8 dst_mac[WMI_MAC_LEN];
+ u8 reserved1[2];
+} __packed;
+
+
+/*
+ * WMI_RECONNECT_CMDID
+ */
+struct wmi_reconnect_cmd {
+ u8 channel; /* hint */
+ u8 reserved;
+ u8 bssid[WMI_MAC_LEN]; /* mandatory if set */
+} __packed;
+
+
+/*
+ * WMI_SET_PMK_CMDID
+ */
+
+#define WMI_MIN_KEY_INDEX (0)
+#define WMI_MAX_KEY_INDEX (3)
+#define WMI_MAX_KEY_LEN (32)
+#define WMI_PASSPHRASE_LEN (64)
+#define WMI_PMK_LEN (32)
+
+struct wmi_set_pmk_cmd {
+ u8 pmk[WMI_PMK_LEN];
+} __packed;
+
+
+/*
+ * WMI_SET_PASSPHRASE_CMDID
+ */
+struct wmi_set_passphrase_cmd {
+ u8 ssid[WMI_MAX_SSID_LEN];
+ u8 passphrase[WMI_PASSPHRASE_LEN];
+ u8 ssid_len;
+ u8 passphrase_len;
+} __packed;
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+enum wmi_key_usage {
+ WMI_KEY_USE_PAIRWISE = 0,
+ WMI_KEY_USE_GROUP = 1,
+ WMI_KEY_USE_TX = 2, /* default Tx Key - Static WEP only */
+};
+
+struct wmi_add_cipher_key_cmd {
+ u8 key_index;
+ u8 key_type;
+ u8 key_usage; /* enum wmi_key_usage */
+ u8 key_len;
+ u8 key_rsc[8]; /* key replay sequence counter */
+ u8 key[WMI_MAX_KEY_LEN];
+ u8 key_op_ctrl; /* Additional Key Control information */
+ u8 mac[WMI_MAC_LEN];
+} __packed;
+
+/*
+ * WMI_DELETE_CIPHER_KEY_CMDID
+ */
+struct wmi_delete_cipher_key_cmd {
+ u8 key_index;
+ u8 mac[WMI_MAC_LEN];
+} __packed;
+
+
+/*
+ * WMI_START_SCAN_CMDID
+ *
+ * Start L1 scan operation
+ *
+ * Returned events:
+ * - WMI_RX_MGMT_PACKET_EVENTID - for every probe resp.
+ * - WMI_SCAN_COMPLETE_EVENTID
+ */
+enum wmi_scan_type {
+ WMI_LONG_SCAN = 0,
+ WMI_SHORT_SCAN = 1,
+};
+
+struct wmi_start_scan_cmd {
+ u8 reserved[8];
+ __le32 home_dwell_time; /* Max duration in the home channel(ms) */
+ __le32 force_scan_interval; /* Time interval between scans (ms)*/
+ u8 scan_type; /* wmi_scan_type */
+ u8 num_channels; /* how many channels follow */
+ struct {
+ u8 channel;
+ u8 reserved;
+ } channel_list[0]; /* channels ID's */
+ /* 0 - 58320 MHz */
+ /* 1 - 60480 MHz */
+ /* 2 - 62640 MHz */
+} __packed;
+
+/*
+ * WMI_SET_PROBED_SSID_CMDID
+ */
+#define MAX_PROBED_SSID_INDEX (15)
+
+enum wmi_ssid_flag {
+ WMI_SSID_FLAG_DISABLE = 0, /* disables entry */
+ WMI_SSID_FLAG_SPECIFIC = 1, /* probes specified ssid */
+ WMI_SSID_FLAG_ANY = 2, /* probes for any ssid */
+};
+
+struct wmi_probed_ssid_cmd {
+ u8 entry_index; /* 0 to MAX_PROBED_SSID_INDEX */
+ u8 flag; /* enum wmi_ssid_flag */
+ u8 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_SET_APPIE_CMDID
+ * Add Application specified IE to a management frame
+ */
+struct wmi_set_appie_cmd {
+ u8 mgmt_frm_type; /* enum wmi_mgmt_frame_type */
+ u8 reserved;
+ __le16 ie_len; /* Length of the IE to be added to MGMT frame */
+ u8 ie_info[0];
+} __packed;
+
+#define WMI_MAX_IE_LEN (1024)
+
+struct wmi_pxmt_range_cfg_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 range;
+} __packed;
+
+struct wmi_pxmt_snr2_range_cfg_cmd {
+ s8 snr2range_arr[WMI_PROX_RANGE_NUM-1];
+} __packed;
+
+/*
+ * WMI_RF_MGMT_CMDID
+ */
+enum wmi_rf_mgmt_type {
+ WMI_RF_MGMT_W_DISABLE = 0,
+ WMI_RF_MGMT_W_ENABLE = 1,
+ WMI_RF_MGMT_GET_STATUS = 2,
+};
+
+struct wmi_rf_mgmt_cmd {
+ __le32 rf_mgmt_type;
+} __packed;
+
+/*
+ * WMI_SET_SSID_CMDID
+ */
+struct wmi_set_ssid_cmd {
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_SET_PCP_CHANNEL_CMDID
+ */
+struct wmi_set_pcp_channel_cmd {
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_BCON_CTRL_CMDID
+ */
+struct wmi_bcon_ctrl_cmd {
+ __le16 bcon_interval;
+ __le16 frag_num;
+ __le64 ss_mask;
+ u8 network_type;
+ u8 reserved;
+ u8 disable_sec_offload;
+ u8 disable_sec;
+} __packed;
+
+/*
+ * WMI_SW_TX_REQ_CMDID
+ */
+struct wmi_sw_tx_req_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 len;
+ u8 payload[0];
+} __packed;
+
+/*
+ * WMI_VRING_CFG_CMDID
+ */
+
+struct wmi_sw_ring_cfg {
+ __le64 ring_mem_base;
+ __le16 ring_size;
+ __le16 max_mpdu_size;
+} __packed;
+
+struct wmi_vring_cfg_schd {
+ __le16 priority;
+ __le16 timeslot_us;
+} __packed;
+
+enum wmi_vring_cfg_encap_trans_type {
+ WMI_VRING_ENC_TYPE_802_3 = 0,
+ WMI_VRING_ENC_TYPE_NATIVE_WIFI = 1,
+};
+
+enum wmi_vring_cfg_ds_cfg {
+ WMI_VRING_DS_PBSS = 0,
+ WMI_VRING_DS_STATION = 1,
+ WMI_VRING_DS_AP = 2,
+ WMI_VRING_DS_ADDR4 = 3,
+};
+
+enum wmi_vring_cfg_nwifi_ds_trans_type {
+ WMI_NWIFI_TX_TRANS_MODE_NO = 0,
+ WMI_NWIFI_TX_TRANS_MODE_AP2PBSS = 1,
+ WMI_NWIFI_TX_TRANS_MODE_STA2PBSS = 2,
+};
+
+enum wmi_vring_cfg_schd_params_priority {
+ WMI_SCH_PRIO_REGULAR = 0,
+ WMI_SCH_PRIO_HIGH = 1,
+};
+
+struct wmi_vring_cfg {
+ struct wmi_sw_ring_cfg tx_sw_ring;
+ u8 ringid; /* 0-23 vrings */
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 encap_trans_type;
+ u8 ds_cfg; /* 802.3 DS cfg */
+ u8 nwifi_ds_trans_type;
+
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_POS (0)
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_LEN (1)
+ #define VRING_CFG_MAC_CTRL_LIFETIME_EN_MSK (0x1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_POS (1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_LEN (1)
+ #define VRING_CFG_MAC_CTRL_AGGR_EN_MSK (0x2)
+ u8 mac_ctrl;
+
+ #define VRING_CFG_TO_RESOLUTION_VALUE_POS (0)
+ #define VRING_CFG_TO_RESOLUTION_VALUE_LEN (6)
+ #define VRING_CFG_TO_RESOLUTION_VALUE_MSK (0x3F)
+ u8 to_resolution;
+ u8 agg_max_wsize;
+ struct wmi_vring_cfg_schd schd_params;
+} __packed;
+
+enum wmi_vring_cfg_cmd_action {
+ WMI_VRING_CMD_ADD = 0,
+ WMI_VRING_CMD_MODIFY = 1,
+ WMI_VRING_CMD_DELETE = 2,
+};
+
+struct wmi_vring_cfg_cmd {
+ __le32 action;
+ struct wmi_vring_cfg vring_cfg;
+} __packed;
+
+/*
+ * WMI_VRING_BA_EN_CMDID
+ */
+struct wmi_vring_ba_en_cmd {
+ u8 ringid;
+ u8 agg_max_wsize;
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_VRING_BA_DIS_CMDID
+ */
+struct wmi_vring_ba_dis_cmd {
+ u8 ringid;
+ u8 reserved;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_NOTIFY_REQ_CMDID
+ */
+struct wmi_notify_req_cmd {
+ u8 cid;
+ u8 reserved[3];
+ __le32 interval_usec;
+} __packed;
+
+/*
+ * WMI_CFG_RX_CHAIN_CMDID
+ */
+enum wmi_sniffer_cfg_mode {
+ WMI_SNIFFER_OFF = 0,
+ WMI_SNIFFER_ON = 1,
+};
+
+enum wmi_sniffer_cfg_phy_info_mode {
+ WMI_SNIFFER_PHY_INFO_DISABLED = 0,
+ WMI_SNIFFER_PHY_INFO_ENABLED = 1,
+};
+
+enum wmi_sniffer_cfg_phy_support {
+ WMI_SNIFFER_CP = 0,
+ WMI_SNIFFER_DP = 1,
+ WMI_SNIFFER_BOTH_PHYS = 2,
+};
+
+struct wmi_sniffer_cfg {
+ __le32 mode; /* enum wmi_sniffer_cfg_mode */
+ __le32 phy_info_mode; /* enum wmi_sniffer_cfg_phy_info_mode */
+ __le32 phy_support; /* enum wmi_sniffer_cfg_phy_support */
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+enum wmi_cfg_rx_chain_cmd_action {
+ WMI_RX_CHAIN_ADD = 0,
+ WMI_RX_CHAIN_DEL = 1,
+};
+
+enum wmi_cfg_rx_chain_cmd_decap_trans_type {
+ WMI_DECAP_TYPE_802_3 = 0,
+ WMI_DECAP_TYPE_NATIVE_WIFI = 1,
+};
+
+enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type {
+ WMI_NWIFI_RX_TRANS_MODE_NO = 0,
+ WMI_NWIFI_RX_TRANS_MODE_PBSS2AP = 1,
+ WMI_NWIFI_RX_TRANS_MODE_PBSS2STA = 2,
+};
+
+struct wmi_cfg_rx_chain_cmd {
+ __le32 action;
+ struct wmi_sw_ring_cfg rx_sw_ring;
+ u8 mid;
+ u8 decap_trans_type;
+
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_POS (0)
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_LEN (1)
+ #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_MSK (0x1)
+ u8 l2_802_3_offload_ctrl;
+
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_POS (0)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_LEN (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_MSK (0x1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_POS (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_LEN (1)
+ #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_MSK (0x2)
+ u8 l2_nwifi_offload_ctrl;
+
+ u8 vlan_id;
+ u8 nwifi_ds_trans_type;
+
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_POS (0)
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_LEN (1)
+ #define L3_L4_CTRL_IPV4_CHECKSUM_EN_MSK (0x1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS (1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_LEN (1)
+ #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_MSK (0x2)
+ u8 l3_l4_ctrl;
+
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_POS (0)
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_MSK (0x1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_POS (1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_WB_THRSH_MSK (0x2)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_POS (2)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_ITR_THRSH_MSK (0x4)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_POS (3)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_LEN (1)
+ #define RING_CTRL_OVERRIDE_HOST_THRSH_MSK (0x8)
+ u8 ring_ctrl;
+
+ __le16 prefetch_thrsh;
+ __le16 wb_thrsh;
+ __le32 itr_value;
+ __le16 host_thrsh;
+ u8 reserved[2];
+ struct wmi_sniffer_cfg sniffer_cfg;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_RESP_CMDID
+ */
+struct wmi_rcp_addba_resp_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ __le16 status_code;
+ __le16 ba_param_set; /* ieee80211_ba_parameterset field to send */
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_RCP_DELBA_CMDID
+ */
+struct wmi_rcp_delba_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 reserved;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_REQ_CMDID
+ */
+struct wmi_rcp_addba_req_cmd {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ /* ieee80211_ba_parameterset field as it received */
+ __le16 ba_param_set;
+ __le16 ba_timeout;
+ /* ieee80211_ba_seqstrl field as it received */
+ __le16 ba_seq_ctrl;
+} __packed;
+
+/*
+ * WMI_SET_MAC_ADDRESS_CMDID
+ */
+struct wmi_set_mac_address_cmd {
+ u8 mac[WMI_MAC_LEN];
+ u8 reserved[2];
+} __packed;
+
+
+/*
+* WMI_EAPOL_TX_CMDID
+*/
+struct wmi_eapol_tx_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 eapol_len;
+ u8 eapol[0];
+} __packed;
+
+/*
+ * WMI_ECHO_CMDID
+ *
+ * Check FW is alive
+ *
+ * WMI_DEEP_ECHO_CMDID
+ *
+ * Check FW and ucode are alive
+ *
+ * Returned event: WMI_ECHO_RSP_EVENTID
+ * same event for both commands
+ */
+struct wmi_echo_cmd {
+ __le32 value;
+} __packed;
+
+/*
+ * WMI Events
+ */
+
+/*
+ * List of Events (target to host)
+ */
+enum wmi_event_id {
+ WMI_IMM_RSP_EVENTID = 0x0000,
+ WMI_READY_EVENTID = 0x1001,
+ WMI_CONNECT_EVENTID = 0x1002,
+ WMI_DISCONNECT_EVENTID = 0x1003,
+ WMI_SCAN_COMPLETE_EVENTID = 0x100a,
+ WMI_REPORT_STATISTICS_EVENTID = 0x100b,
+ WMI_RD_MEM_RSP_EVENTID = 0x1800,
+ WMI_FW_READY_EVENTID = 0x1801,
+ WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x0200,
+ WMI_ECHO_RSP_EVENTID = 0x1803,
+ WMI_CONFIG_MAC_DONE_EVENTID = 0x1805,
+ WMI_CONFIG_PHY_DEBUG_DONE_EVENTID = 0x1806,
+ WMI_ADD_STATION_DONE_EVENTID = 0x1807,
+ WMI_ADD_DEBUG_TX_PCKT_DONE_EVENTID = 0x1808,
+ WMI_PHY_GET_STATISTICS_EVENTID = 0x1809,
+ WMI_FS_TUNE_DONE_EVENTID = 0x180a,
+ WMI_CORR_MEASURE_DONE_EVENTID = 0x180b,
+ WMI_TEMP_SENSE_DONE_EVENTID = 0x180e,
+ WMI_DC_CALIB_DONE_EVENTID = 0x180f,
+ WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
+ WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
+ WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
+ WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
+ WMI_MARLON_R_ACTIVATE_DONE_EVENTID = 0x1817,
+ WMI_MARLON_R_READ_DONE_EVENTID = 0x1818,
+ WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
+ WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181a,
+ WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181d,
+
+ WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
+ WMI_VRING_CFG_DONE_EVENTID = 0x1821,
+ WMI_RX_ON_DONE_EVENTID = 0x1822,
+ WMI_BA_STATUS_EVENTID = 0x1823,
+ WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
+ WMI_ADDBA_RESP_SENT_EVENTID = 0x1825,
+ WMI_DELBA_EVENTID = 0x1826,
+ WMI_GET_SSID_EVENTID = 0x1828,
+ WMI_GET_PCP_CHANNEL_EVENTID = 0x182a,
+ WMI_SW_TX_COMPLETE_EVENTID = 0x182b,
+ WMI_RX_OFF_DONE_EVENTID = 0x182c,
+
+ WMI_READ_MAC_RXQ_EVENTID = 0x1830,
+ WMI_READ_MAC_TXQ_EVENTID = 0x1831,
+ WMI_WRITE_MAC_RXQ_EVENTID = 0x1832,
+ WMI_WRITE_MAC_TXQ_EVENTID = 0x1833,
+ WMI_WRITE_MAC_XQ_FIELD_EVENTID = 0x1834,
+
+ WMI_BEAFORMING_MGMT_DONE_EVENTID = 0x1836,
+ WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
+ WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
+ WMI_RS_MGMT_DONE_EVENTID = 0x1852,
+ WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
+ WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
+ WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
+
+ /* Performance monitoring events */
+ WMI_DATA_PORT_OPEN_EVENTID = 0x1860,
+ WMI_WBE_LINKDOWN_EVENTID = 0x1861,
+
+ WMI_BF_CTRL_DONE_EVENTID = 0x1862,
+ WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
+ WMI_GET_STATUS_DONE_EVENTID = 0x1864,
+
+ WMI_UNIT_TEST_EVENTID = 0x1900,
+ WMI_FLASH_READ_DONE_EVENTID = 0x1902,
+ WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
+
+ WMI_SET_CHANNEL_EVENTID = 0x9000,
+ WMI_ASSOC_REQ_EVENTID = 0x9001,
+ WMI_EAPOL_RX_EVENTID = 0x9002,
+ WMI_MAC_ADDR_RESP_EVENTID = 0x9003,
+ WMI_FW_VER_EVENTID = 0x9004,
+};
+
+/*
+ * Events data structures
+ */
+
+/*
+ * WMI_RF_MGMT_STATUS_EVENTID
+ */
+enum wmi_rf_status {
+ WMI_RF_ENABLED = 0,
+ WMI_RF_DISABLED_HW = 1,
+ WMI_RF_DISABLED_SW = 2,
+ WMI_RF_DISABLED_HW_SW = 3,
+};
+
+struct wmi_rf_mgmt_status_event {
+ __le32 rf_status;
+} __packed;
+
+/*
+ * WMI_GET_STATUS_DONE_EVENTID
+ */
+struct wmi_get_status_done_event {
+ __le32 is_associated;
+ u8 cid;
+ u8 reserved0[3];
+ u8 bssid[WMI_MAC_LEN];
+ u8 channel;
+ u8 reserved1;
+ u8 network_type;
+ u8 reserved2[3];
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+ __le32 rf_status;
+ __le32 is_secured;
+} __packed;
+
+/*
+ * WMI_FW_VER_EVENTID
+ */
+struct wmi_fw_ver_event {
+ u8 major;
+ u8 minor;
+ __le16 subminor;
+ __le16 build;
+} __packed;
+
+/*
+* WMI_MAC_ADDR_RESP_EVENTID
+*/
+struct wmi_mac_addr_resp_event {
+ u8 mac[WMI_MAC_LEN];
+ u8 auth_mode;
+ u8 crypt_mode;
+ __le32 offload_mode;
+} __packed;
+
+/*
+* WMI_EAPOL_RX_EVENTID
+*/
+struct wmi_eapol_rx_event {
+ u8 src_mac[WMI_MAC_LEN];
+ __le16 eapol_len;
+ u8 eapol[0];
+} __packed;
+
+/*
+* WMI_READY_EVENTID
+*/
+enum wmi_phy_capability {
+ WMI_11A_CAPABILITY = 1,
+ WMI_11G_CAPABILITY = 2,
+ WMI_11AG_CAPABILITY = 3,
+ WMI_11NA_CAPABILITY = 4,
+ WMI_11NG_CAPABILITY = 5,
+ WMI_11NAG_CAPABILITY = 6,
+ WMI_11AD_CAPABILITY = 7,
+ WMI_11N_CAPABILITY_OFFSET = WMI_11NA_CAPABILITY - WMI_11A_CAPABILITY,
+};
+
+struct wmi_ready_event {
+ __le32 sw_version;
+ __le32 abi_version;
+ u8 mac[WMI_MAC_LEN];
+ u8 phy_capability; /* enum wmi_phy_capability */
+ u8 reserved;
+} __packed;
+
+/*
+ * WMI_NOTIFY_REQ_DONE_EVENTID
+ */
+struct wmi_notify_req_done_event {
+ __le32 status;
+ __le64 tsf;
+ __le32 snr_val;
+ __le32 tx_tpt;
+ __le32 tx_goodput;
+ __le32 rx_goodput;
+ __le16 bf_mcs;
+ __le16 my_rx_sector;
+ __le16 my_tx_sector;
+ __le16 other_rx_sector;
+ __le16 other_tx_sector;
+ __le16 range;
+} __packed;
+
+/*
+ * WMI_CONNECT_EVENTID
+ */
+struct wmi_connect_event {
+ u8 channel;
+ u8 reserved0;
+ u8 bssid[WMI_MAC_LEN];
+ __le16 listen_interval;
+ __le16 beacon_interval;
+ u8 network_type;
+ u8 reserved1[3];
+ u8 beacon_ie_len;
+ u8 assoc_req_len;
+ u8 assoc_resp_len;
+ u8 cid;
+ u8 reserved2[3];
+ u8 assoc_info[0];
+} __packed;
+
+/*
+ * WMI_DISCONNECT_EVENTID
+ */
+enum wmi_disconnect_reason {
+ WMI_DIS_REASON_NO_NETWORK_AVAIL = 1,
+ WMI_DIS_REASON_LOST_LINK = 2, /* bmiss */
+ WMI_DIS_REASON_DISCONNECT_CMD = 3,
+ WMI_DIS_REASON_BSS_DISCONNECTED = 4,
+ WMI_DIS_REASON_AUTH_FAILED = 5,
+ WMI_DIS_REASON_ASSOC_FAILED = 6,
+ WMI_DIS_REASON_NO_RESOURCES_AVAIL = 7,
+ WMI_DIS_REASON_CSERV_DISCONNECT = 8,
+ WMI_DIS_REASON_INVALID_PROFILE = 10,
+ WMI_DIS_REASON_DOT11H_CHANNEL_SWITCH = 11,
+ WMI_DIS_REASON_PROFILE_MISMATCH = 12,
+ WMI_DIS_REASON_CONNECTION_EVICTED = 13,
+ WMI_DIS_REASON_IBSS_MERGE = 14,
+};
+
+struct wmi_disconnect_event {
+ __le16 protocol_reason_status; /* reason code, see 802.11 spec. */
+ u8 bssid[WMI_MAC_LEN]; /* set if known */
+ u8 disconnect_reason; /* see wmi_disconnect_reason_e */
+ u8 assoc_resp_len;
+ u8 assoc_info[0];
+} __packed;
+
+/*
+ * WMI_SCAN_COMPLETE_EVENTID
+ */
+struct wmi_scan_complete_event {
+ __le32 status;
+} __packed;
+
+/*
+ * WMI_BA_STATUS_EVENTID
+ */
+enum wmi_vring_ba_status {
+ WMI_BA_AGREED = 0,
+ WMI_BA_NON_AGREED = 1,
+};
+
+struct wmi_vring_ba_status_event {
+ __le16 status;
+ u8 reserved[2];
+ u8 ringid;
+ u8 agg_wsize;
+ __le16 ba_timeout;
+} __packed;
+
+/*
+ * WMI_DELBA_EVENTID
+ */
+struct wmi_delba_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 from_initiator;
+ __le16 reason;
+} __packed;
+
+/*
+ * WMI_VRING_CFG_DONE_EVENTID
+ */
+enum wmi_vring_cfg_done_event_status {
+ WMI_VRING_CFG_SUCCESS = 0,
+ WMI_VRING_CFG_FAILURE = 1,
+};
+
+struct wmi_vring_cfg_done_event {
+ u8 ringid;
+ u8 status;
+ u8 reserved[2];
+ __le32 tx_vring_tail_ptr;
+} __packed;
+
+/*
+ * WMI_ADDBA_RESP_SENT_EVENTID
+ */
+enum wmi_rcp_addba_resp_sent_event_status {
+ WMI_ADDBA_SUCCESS = 0,
+ WMI_ADDBA_FAIL = 1,
+};
+
+struct wmi_rcp_addba_resp_sent_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 reserved;
+ __le16 status;
+} __packed;
+
+/*
+ * WMI_RCP_ADDBA_REQ_EVENTID
+ */
+struct wmi_rcp_addba_req_event {
+
+ #define CIDXTID_CID_POS (0)
+ #define CIDXTID_CID_LEN (4)
+ #define CIDXTID_CID_MSK (0xF)
+ #define CIDXTID_TID_POS (4)
+ #define CIDXTID_TID_LEN (4)
+ #define CIDXTID_TID_MSK (0xF0)
+ u8 cidxtid;
+
+ u8 dialog_token;
+ __le16 ba_param_set; /* ieee80211_ba_parameterset as it received */
+ __le16 ba_timeout;
+ __le16 ba_seq_ctrl; /* ieee80211_ba_seqstrl field as it received */
+} __packed;
+
+/*
+ * WMI_CFG_RX_CHAIN_DONE_EVENTID
+ */
+enum wmi_cfg_rx_chain_done_event_status {
+ WMI_CFG_RX_CHAIN_SUCCESS = 1,
+};
+
+struct wmi_cfg_rx_chain_done_event {
+ __le32 rx_ring_tail_ptr; /* Rx V-Ring Tail pointer */
+ __le32 status;
+} __packed;
+
+/*
+ * WMI_WBE_LINKDOWN_EVENTID
+ */
+enum wmi_wbe_link_down_event_reason {
+ WMI_WBE_REASON_USER_REQUEST = 0,
+ WMI_WBE_REASON_RX_DISASSOC = 1,
+ WMI_WBE_REASON_BAD_PHY_LINK = 2,
+};
+
+struct wmi_wbe_link_down_event {
+ u8 cid;
+ u8 reserved[3];
+ __le32 reason;
+} __packed;
+
+/*
+ * WMI_DATA_PORT_OPEN_EVENTID
+ */
+struct wmi_data_port_open_event {
+ u8 cid;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_GET_PCP_CHANNEL_EVENTID
+ */
+struct wmi_get_pcp_channel_event {
+ u8 channel;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_SW_TX_COMPLETE_EVENTID
+ */
+enum wmi_sw_tx_status {
+ WMI_TX_SW_STATUS_SUCCESS = 0,
+ WMI_TX_SW_STATUS_FAILED_NO_RESOURCES = 1,
+ WMI_TX_SW_STATUS_FAILED_TX = 2,
+};
+
+struct wmi_sw_tx_complete_event {
+ u8 status; /* enum wmi_sw_tx_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_GET_SSID_EVENTID
+ */
+struct wmi_get_ssid_event {
+ __le32 ssid_len;
+ u8 ssid[WMI_MAX_SSID_LEN];
+} __packed;
+
+/*
+ * WMI_RX_MGMT_PACKET_EVENTID
+ */
+struct wmi_rx_mgmt_info {
+ u8 mcs;
+ s8 snr;
+ __le16 range;
+ __le16 stype;
+ __le16 status;
+ __le32 len;
+ u8 qid;
+ u8 mid;
+ u8 cid;
+ u8 channel; /* From Radio MNGR */
+} __packed;
+
+struct wmi_rx_mgmt_packet_event {
+ struct wmi_rx_mgmt_info info;
+ u8 payload[0];
+} __packed;
+
+/*
+ * WMI_ECHO_RSP_EVENTID
+ */
+struct wmi_echo_event {
+ __le32 echoed_value;
+} __packed;
+
+#endif /* __WILOCITY_WMI_H__ */
--
1.7.10.4
On Wed, 2012-12-12 at 17:47 +0200, Vladimir Kondratiev wrote:
> Vladimir Kondratiev (3):
> wireless: Driver for 60GHz card wil6210
Since you didn't want to hear my objections on the iftype usage ...
maybe you should not Cc me any more.
johannes
On Wednesday, December 12, 2012 07:56:10 AM Luis R. Rodriguez wrote:
> On Wed, Dec 12, 2012 at 05:47:57PM +0200, Vladimir Kondratiev wrote:
> > Unless patch for dynamic hexdump merged into mainstream kernel,
> > need to provide replacement for the dynamic hexdump functionality
> >
> > This patch do not hurt compilation with kernel that have
> > 'dynamic hexdump' patch merged - check performed by
> > #if !defined(print_hex_dump_debug)
> >
> > To REMOVE when dynamic hexdump merged!!
> >
> > Signed-off-by: Vladimir Kondratiev <[email protected]>
>
> I'd say just prefix with wil_ for now.
>
> Luis
Well, there is 2 alternative approaches:
1) 'weak' local implementation of the same functions
2) alternative implementation with different names
I am in favor of 1) and this is what I submitted; but I'd provide
below option 2). If it looks better for the most of people, let it be.
Patch below is alternative for:
[PATCH v10 2/3] wil6210: Local compensation for dynamic hexdump
Either that patch or those below may be used.
Opinions?
>From 6ef3f53e3fe86c9a890dc457f6b3b2bc779becc2 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <[email protected]>
Date: Thu, 13 Dec 2012 09:37:19 +0200
Subject: [PATCH] wil6210: alternative functions for dynamic hexdump
Unless patch for dynamic hexdump merged into mainstream kernel,
need to provide replacement for the dynamic hexdump functionality
This patch introduces alternative functions with prefix wil_.
To REMOVE when dynamic hexdump merged!!
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
drivers/net/wireless/ath/wil6210/dbg_hexdump.h | 30 ++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 6 +++--
2 files changed, 34 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/wireless/ath/wil6210/dbg_hexdump.h
diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
new file mode 100644
index 0000000..6a315ba
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
@@ -0,0 +1,30 @@
+#ifndef WIL_DBG_HEXDUMP_H_
+#define WIL_DBG_HEXDUMP_H_
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+do { \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, \
+ __builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
+ print_hex_dump(KERN_DEBUG, prefix_str, \
+ prefix_type, rowsize, groupsize, \
+ buf, len, ascii); \
+} while (0)
+
+#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
+ wil_dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
+#else /* defined(CONFIG_DYNAMIC_DEBUG) */
+#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
+
+#endif /* WIL_DBG_HEXDUMP_H_ */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index ef5a17f..9bcfffa 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -21,6 +21,8 @@
#include <linux/wireless.h>
#include <net/cfg80211.h>
+#include "dbg_hexdump.h"
+
#define WIL_NAME "wil6210"
/**
@@ -276,13 +278,13 @@ struct wil6210_priv {
#define wil_hex_dump_TXRX(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
- print_hex_dump_debug("DBG[TXRX]" prefix_str,\
+ wil_print_hex_dump_debug("DBG[TXRX]" prefix_str,\
prefix_type, rowsize, \
groupsize, buf, len, ascii)
#define wil_hex_dump_WMI(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
- print_hex_dump_debug("DBG[ WMI]" prefix_str, \
+ wil_print_hex_dump_debug("DBG[ WMI]" prefix_str,\
prefix_type, rowsize, \
groupsize, buf, len, ascii)
--
1.7.10.4
Unless patch for dynamic hexdump merged into mainstream kernel,
need to provide replacement for the dynamic hexdump functionality
This patch do not hurt compilation with kernel that have
'dynamic hexdump' patch merged - check performed by
#if !defined(print_hex_dump_debug)
To REMOVE when dynamic hexdump merged!!
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
drivers/net/wireless/ath/wil6210/dbg_hexdump.h | 32 ++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 2 ++
2 files changed, 34 insertions(+)
create mode 100644 drivers/net/wireless/ath/wil6210/dbg_hexdump.h
diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
new file mode 100644
index 0000000..7144eed
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
@@ -0,0 +1,32 @@
+#ifndef DBG_HEXDUMP_H_
+#define DBG_HEXDUMP_H_
+
+#if !defined(print_hex_dump_debug)
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+do { \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, \
+ __builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
+ print_hex_dump(KERN_DEBUG, prefix_str, \
+ prefix_type, rowsize, groupsize, \
+ buf, len, ascii); \
+} while (0)
+
+#define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
+ dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
+#else /* defined(CONFIG_DYNAMIC_DEBUG) */
+#define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
+#endif /* !defined(print_hex_dump_debug) */
+
+#endif /* DBG_HEXDUMP_H_ */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index ef5a17f..dd6ccc5 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -21,6 +21,8 @@
#include <linux/wireless.h>
#include <net/cfg80211.h>
+#include "dbg_hexdump.h"
+
#define WIL_NAME "wil6210"
/**
--
1.7.10.4
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
drivers/net/wireless/ath/Kconfig | 1 +
drivers/net/wireless/ath/Makefile | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 1a67a4f..2c02b4e 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -30,5 +30,6 @@ source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
source "drivers/net/wireless/ath/ar5523/Kconfig"
+source "drivers/net/wireless/ath/wil6210/Kconfig"
endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index 1e18621..97b964d 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k/
obj-$(CONFIG_CARL9170) += carl9170/
obj-$(CONFIG_ATH6KL) += ath6kl/
obj-$(CONFIG_AR5523) += ar5523/
+obj-$(CONFIG_WIL6210) += wil6210/
obj-$(CONFIG_ATH_COMMON) += ath.o
--
1.7.10.4
On Sunday, December 16, 2012 02:29:05 PM Vladimir Kondratiev wrote:
> Please find below patch where supported is "true" AP mode;
> PCP support dropped.
> Changes are mostly in the firmware, but few lines changed
> in the driver as well.
>
> Johannes: does this address your concerns?
>
> John: can this driver get to 3.8? Is it correct,
> "driver for new hardware" is eligible even if merge window already opened?
>
Hi Johannes,
Any feedback? Now, when I removed all PBSS and support "true" AP mode,
iftype usage should be OK. I will work on PBSS later.
Thanks, Vladimir
On Wednesday, December 12, 2012 05:04:38 PM Johannes Berg wrote:
> On Wed, 2012-12-12 at 17:47 +0200, Vladimir Kondratiev wrote:
>
> > Vladimir Kondratiev (3):
> > wireless: Driver for 60GHz card wil6210
>
> Since you didn't want to hear my objections on the iftype usage ...
> maybe you should not Cc me any more.
>
> johannes
>
Johannes,
I do hear it, and I agree with it!!!
I will work to support this new
iftype, PBSS, properly. I just don't have enough data to do it right
now. Thus, I want initial driver for the 1-st ever 60g card to be merged;
this will serve as test bed for the next framework modifications.
I recall, you was asking me why do I pushing to do 60g related
infrastructure changes when no one driver exists. I want to address this
and then return to the infrastructure.
Let's have at least something working as 1-st step. Now, I need to assemble
all pieces of the puzzle:
- initial infrastructure (done)
- minimal driver (these patches)
- tools (wpa_supplicant partially done, other patches sent; iw - partially done)
- regulatory - patches submitted.
Then, when minimal support will be in place, I can handle new features.
Hope it explain why I want to merge minimal driver 1-st.
Thanks, Vladimir
On Wed, Dec 12, 2012 at 06:25:06PM +0200, Vladimir Kondratiev wrote:
> On Wednesday, December 12, 2012 05:04:38 PM Johannes Berg wrote:
> > On Wed, 2012-12-12 at 17:47 +0200, Vladimir Kondratiev wrote:
> >
> > > Vladimir Kondratiev (3):
> > > wireless: Driver for 60GHz card wil6210
> >
> > Since you didn't want to hear my objections on the iftype usage ...
> > maybe you should not Cc me any more.
> >
> > johannes
> >
>
> Johannes,
>
> I do hear it, and I agree with it!!!
>
> I will work to support this new
> iftype, PBSS, properly. I just don't have enough data to do it right
> now. Thus, I want initial driver for the 1-st ever 60g card to be merged;
> this will serve as test bed for the next framework modifications.
>
> I recall, you was asking me why do I pushing to do 60g related
> infrastructure changes when no one driver exists. I want to address this
> and then return to the infrastructure.
>
> Let's have at least something working as 1-st step. Now, I need to assemble
> all pieces of the puzzle:
>
> - initial infrastructure (done)
> - minimal driver (these patches)
> - tools (wpa_supplicant partially done, other patches sent; iw - partially done)
> - regulatory - patches submitted.
>
> Then, when minimal support will be in place, I can handle new features.
>
> Hope it explain why I want to merge minimal driver 1-st.
Vladimir, please only enable monitor support and STA mode to
be used on the upstream driver submission. If you want PCP mode
you'll have to address Johannes' concerns. If you want to enable
PCP mode as you have you can enable it by enabling it through an
extra crap/ category patch on compat-drivers.
Luis
On Wed, Dec 12, 2012 at 05:47:57PM +0200, Vladimir Kondratiev wrote:
> Unless patch for dynamic hexdump merged into mainstream kernel,
> need to provide replacement for the dynamic hexdump functionality
>
> This patch do not hurt compilation with kernel that have
> 'dynamic hexdump' patch merged - check performed by
> #if !defined(print_hex_dump_debug)
>
> To REMOVE when dynamic hexdump merged!!
>
> Signed-off-by: Vladimir Kondratiev <[email protected]>
I'd say just prefix with wil_ for now.
Luis