2016-08-22 22:40:28

by Ismael Luceno

Subject: [PATCH v2] brcmfmac: Add USB ID for Cisco Linksys AE1200

The AE1200 comes with different revisions of the BCM43235 chipset,
but all have the same USB ID. Only revision 3 can be supported.

Signed-off-by: Ismael Luceno <[email protected]>
---
Changes since v1:
- Keep the long device ID in a single line.
- Added desc. about supported devices.

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 4 ++++
drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 2 ++
2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 66c26a92b29c..5ec005e9f9d7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1447,11 +1447,15 @@ static int brcmf_usb_reset_resume(struct usb_interface *intf)
#define BRCMF_USB_DEVICE(dev_id) \
{ USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }

+#define LINKSYS_USB_DEVICE(dev_id) \
+ { USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id) }
+
static struct usb_device_id brcmf_usb_devid_table[] = {
BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
BRCMF_USB_DEVICE(BRCM_USB_43236_DEVICE_ID),
BRCMF_USB_DEVICE(BRCM_USB_43242_DEVICE_ID),
BRCMF_USB_DEVICE(BRCM_USB_43569_DEVICE_ID),
+ LINKSYS_USB_DEVICE(BRCM_USB_43235_LINKSYS_DEVICE_ID),
{ USB_DEVICE(BRCM_USB_VENDOR_ID_LG, BRCM_USB_43242_LG_DEVICE_ID) },
/* special entry for device with firmware loaded and running */
BRCMF_USB_DEVICE(BRCM_USB_BCMFW_DEVICE_ID),
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
index 699f2c2782ee..f207c2693877 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -22,6 +22,7 @@

#define BRCM_USB_VENDOR_ID_BROADCOM 0x0a5c
#define BRCM_USB_VENDOR_ID_LG 0x043e
+#define BRCM_USB_VENDOR_ID_LINKSYS 0x13b1
#define BRCM_PCIE_VENDOR_ID_BROADCOM PCI_VENDOR_ID_BROADCOM

/* Chipcommon Core Chip IDs */
@@ -56,6 +57,7 @@

/* USB Device IDs */
#define BRCM_USB_43143_DEVICE_ID 0xbd1e
+#define BRCM_USB_43235_LINKSYS_DEVICE_ID 0x0039
#define BRCM_USB_43236_DEVICE_ID 0xbd17
#define BRCM_USB_43242_DEVICE_ID 0xbd1f
#define BRCM_USB_43242_LG_DEVICE_ID 0x3101
--
2.9.2

2016-09-03 17:02:11

by Kalle Valo

Subject: Re: [v2] brcmfmac: Add USB ID for Cisco Linksys AE1200

Ismael Luceno <[email protected]> wrote:
> The AE1200 comes with different revisions of the BCM43235 chipset,
> but all have the same USB ID. Only revision 3 can be supported.
>
> Signed-off-by: Ismael Luceno <[email protected]>

Thanks, 1 patch applied to wireless-drivers-next.git:

bccf3ffc8c6d brcmfmac: Add USB ID for Cisco Linksys AE1200

--
Sent by pwcli
https://patchwork.kernel.org/patch/9294493/