2020-04-07 07:34:21

by Kai-Heng Feng

[permalink] [raw]
Subject: [PATCH v2] rtw88: Add delay on polling h2c command status bit

On some systems we can constanly see rtw88 complains:
[39584.721375] rtw_pci 0000:03:00.0: failed to send h2c command

Increase interval of each check to wait the status bit really changed.

Use read_poll_timeout() macro which fits anything we need here.

Suggested-by: Kalle Valo <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
---
v2:
- Use read_poll_timeout macro.

drivers/net/wireless/realtek/rtw88/fw.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 05c430b3489c..8508b83d98ed 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -2,6 +2,8 @@
/* Copyright(c) 2018-2019 Realtek Corporation
*/

+#include <linux/iopoll.h>
+
#include "main.h"
#include "coex.h"
#include "fw.h"
@@ -193,8 +195,8 @@ static void rtw_fw_send_h2c_command(struct rtw_dev *rtwdev,
u8 box;
u8 box_state;
u32 box_reg, box_ex_reg;
- u32 h2c_wait;
int idx;
+ int ret;

rtw_dbg(rtwdev, RTW_DBG_FW,
"send H2C content %02x%02x%02x%02x %02x%02x%02x%02x\n",
@@ -226,12 +228,11 @@ static void rtw_fw_send_h2c_command(struct rtw_dev *rtwdev,
goto out;
}

- h2c_wait = 20;
- do {
- box_state = rtw_read8(rtwdev, REG_HMETFR);
- } while ((box_state >> box) & 0x1 && --h2c_wait > 0);
+ ret = read_poll_timeout(rtw_read8, box_state,
+ !((box_state >> box) & 0x1), 100, 3000, false,
+ rtwdev, REG_HMETFR);

- if (!h2c_wait) {
+ if (ret) {
rtw_err(rtwdev, "failed to send h2c command\n");
goto out;
}
--
2.17.1


2020-04-15 21:40:24

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH v2] rtw88: Add delay on polling h2c command status bit

Kai-Heng Feng <[email protected]> wrote:

> On some systems we can constanly see rtw88 complains:
> [39584.721375] rtw_pci 0000:03:00.0: failed to send h2c command
>
> Increase interval of each check to wait the status bit really changed.
>
> Use read_poll_timeout() macro which fits anything we need here.
>
> Suggested-by: Kalle Valo <[email protected]>
> Signed-off-by: Kai-Heng Feng <[email protected]>

Patch applied to wireless-drivers-next.git, thanks.

6343a6d4b213 rtw88: Add delay on polling h2c command status bit

--
https://patchwork.kernel.org/patch/11477667/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches