For wmi tlv type, firmware disable peer stats info by default, after
enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if
ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware.
Enable it will only set a flag in firmware, firmware will not report
it without receive request WMI command.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.
Signed-off-by: Wen Gong <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 5 +++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 1 +
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
4 files changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6791c0035be0..47fd5035f000 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2959,6 +2959,11 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
arvif->aid = bss_conf->aid;
ether_addr_copy(arvif->bssid, bss_conf->bssid);
+ ret = ath10k_wmi_pdev_set_param(ar,
+ ar->wmi.pdev_param->peer_stats_info_enable, 1);
+ if (ret)
+ ath10k_warn(ar, "failed to enable peer stats info: %d\n", ret);
+
ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
if (ret) {
ath10k_warn(ar, "failed to set vdev %d up: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e1ab900f2662..27aaa48615d2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -4269,6 +4269,7 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
.rfkill_config = WMI_TLV_PDEV_PARAM_HW_RFKILL_CONFIG,
.rfkill_enable = WMI_TLV_PDEV_PARAM_RFKILL_ENABLE,
+ .peer_stats_info_enable = WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE,
};
static struct wmi_peer_param_map wmi_tlv_peer_param_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 4972dc12991c..cd400b19a64d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -451,6 +451,7 @@ enum wmi_tlv_pdev_param {
WMI_TLV_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD,
WMI_TLV_PDEV_PARAM_TXPOWER_REASON_NONE,
WMI_TLV_PDEV_PARAM_TXPOWER_REASON_SAR,
+ WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE = 0x8b,
WMI_TLV_PDEV_PARAM_TXPOWER_REASON_MAX,
};
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 209070714d1a..46740e16f3ce 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3798,6 +3798,7 @@ struct wmi_pdev_param_map {
u32 enable_btcoex;
u32 rfkill_config;
u32 rfkill_enable;
+ u32 peer_stats_info_enable;
};
#define WMI_PDEV_PARAM_UNSUPPORTED 0
--
2.23.0
Wen Gong <[email protected]> wrote:
> For wmi tlv type, firmware disable peer stats info by default, after
> enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if
> ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware.
>
> Enable it will only set a flag in firmware, firmware will not report
> it without receive request WMI command.
>
> Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.
>
> Signed-off-by: Wen Gong <[email protected]>
Fails to apply, please rebase.
error: patch failed: drivers/net/wireless/ath/ath10k/core.h:502
error: drivers/net/wireless/ath/ath10k/core.h: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath10k/mac.c:8326
error: drivers/net/wireless/ath/ath10k/mac.c: patch does not apply
stg import: Diff does not apply cleanly
4 patches set to Changes Requested.
11505367 [1/4] ath10k: enable firmware peer stats info for wmi tlv
11505377 [2/4] ath10k: add rx bitrate report for SDIO
11505371 [3/4] ath10k: add bitrate parse for peer stats info
11505369 [4/4] ath10k: correct tx bitrate of iw for SDIO
--
https://patchwork.kernel.org/patch/11505367/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches