2021-02-23 14:50:21

by Youghandhar Chintala

Subject: [PATCH v3] ath10k: skip the wait for completion to recovery in shutdown path

Currently in the shutdown callback we wait for recovery to complete
before freeing up the resources. This results in additional two seconds
delay during the shutdown and thereby increase the shutdown time.

As an attempt to take less time during shutdown, remove the wait for
recovery completion in the shutdown callback and added an API to freeing
the reosurces in which they were common for shutdown and removing
the module.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Signed-off-by: Youghandhar Chintala <[email protected]>
Change-Id: I65bc27b5adae1fedc7f7b367ef13aafbd01f8c0c
---
Changes from v2:
-Corrected commit text and added common API for freeing the
resources for shutdown and unloading the module
---
drivers/net/wireless/ath/ath10k/snoc.c | 29 ++++++++++++++++++--------
1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 84666f72bdfa..70b3f2bd1c81 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1781,17 +1781,11 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
return ret;
}

-static int ath10k_snoc_remove(struct platform_device *pdev)
+static int ath10k_snoc_free_resources(struct ath10k *ar)
{
- struct ath10k *ar = platform_get_drvdata(pdev);
struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);

- ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc remove\n");
-
- reinit_completion(&ar->driver_recovery);
-
- if (test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags))
- wait_for_completion_timeout(&ar->driver_recovery, 3 * HZ);
+ ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc free resources\n");

set_bit(ATH10K_SNOC_FLAG_UNREGISTERING, &ar_snoc->flags);

@@ -1805,12 +1799,29 @@ static int ath10k_snoc_remove(struct platform_device *pdev)
return 0;
}

+static int ath10k_snoc_remove(struct platform_device *pdev)
+{
+ struct ath10k *ar = platform_get_drvdata(pdev);
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+
+ ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc remove\n");
+
+ reinit_completion(&ar->driver_recovery);
+
+ if (test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags))
+ wait_for_completion_timeout(&ar->driver_recovery, 3 * HZ);
+
+ ath10k_snoc_free_resources(ar);
+
+ return 0;
+}
+
static void ath10k_snoc_shutdown(struct platform_device *pdev)
{
struct ath10k *ar = platform_get_drvdata(pdev);

ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc shutdown\n");
- ath10k_snoc_remove(pdev);
+ ath10k_snoc_free_resources(ar);
}

static struct platform_driver ath10k_snoc_driver = {
--
2.29.0

2021-03-09 10:51:08

by Kalle Valo

Subject: Re: [PATCH v3] ath10k: skip the wait for completion to recovery in shutdown path

Youghandhar Chintala <[email protected]> wrote:

> Currently in the shutdown callback we wait for recovery to complete
> before freeing up the resources. This results in additional two seconds
> delay during the shutdown and thereby increase the shutdown time.
>
> As an attempt to take less time during shutdown, remove the wait for
> recovery completion in the shutdown callback and added an API to freeing
> the reosurces in which they were common for shutdown and removing
> the module.
>
> Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
>
> Signed-off-by: Youghandhar Chintala <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>

Patch applied to ath-next branch of ath.git, thanks.

018e3fa8e7ff ath10k: skip the wait for completion to recovery in shutdown path

--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches