From: Tony Lindgren <[email protected]>
[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ]
We can currently get a "command execute failure 19" error on beacon loss
if the signal is weak:
wlcore: Beacon loss detected. roles:0xff
wlcore: Connection loss work (role_id: 0).
...
wlcore: ERROR command execute failure 19
...
WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803
...
(wl12xx_queue_recovery_work.part.0 [wlcore])
(wl12xx_cmd_role_start_sta [wlcore])
(wl1271_op_bss_info_changed [wlcore])
(ieee80211_prep_connection [mac80211])
Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware,
and seems to mean that the firmware no longer wants to see the quirk
handling for WLCORE_QUIRK_START_STA_FAILS done.
This quirk got added with commit 18eab430700d ("wlcore: workaround
start_sta problem in wl12xx fw"), and it seems that this already got fixed
in the firmware long time ago back in 2012 as wl18xx never had this quirk
in place to start with.
As we no longer even support firmware that early, to me it seems that it's
safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks
like earlier firmware got disabled back in 2013 with commit 0e284c074ef9
("wl12xx: increase minimum singlerole firmware version required").
If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any
firmware that the driver works with, we can simply revert this patch and
add extra checks for firmware version used.
With this fix wlcore reconnects properly after a beacon loss.
Cc: Raz Bouganim <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ti/wl12xx/main.c | 3 ---
drivers/net/wireless/ti/wlcore/main.c | 15 +--------------
drivers/net/wireless/ti/wlcore/wlcore.h | 3 ---
3 files changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index af0fe2e171510..e4b28d37046aa 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -647,7 +647,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
WLCORE_QUIRK_DUAL_PROBE_TMPL |
WLCORE_QUIRK_TKIP_HEADER_SPACE |
- WLCORE_QUIRK_START_STA_FAILS |
WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
wl->mr_fw_name = WL127X_FW_NAME_MULTI;
@@ -671,7 +670,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
WLCORE_QUIRK_DUAL_PROBE_TMPL |
WLCORE_QUIRK_TKIP_HEADER_SPACE |
- WLCORE_QUIRK_START_STA_FAILS |
WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wl->plt_fw_name = WL127X_PLT_FW_NAME;
wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
@@ -700,7 +698,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
WLCORE_QUIRK_DUAL_PROBE_TMPL |
WLCORE_QUIRK_TKIP_HEADER_SPACE |
- WLCORE_QUIRK_START_STA_FAILS |
WLCORE_QUIRK_AP_ZERO_SESSION_ID;
wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index cc10b72607c69..3f61289ce036e 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2889,21 +2889,8 @@ static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif)
if (is_ibss)
ret = wl12xx_cmd_role_start_ibss(wl, wlvif);
- else {
- if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) {
- /*
- * TODO: this is an ugly workaround for wl12xx fw
- * bug - we are not able to tx/rx after the first
- * start_sta, so make dummy start+stop calls,
- * and then call start_sta again.
- * this should be fixed in the fw.
- */
- wl12xx_cmd_role_start_sta(wl, wlvif);
- wl12xx_cmd_role_stop_sta(wl, wlvif);
- }
-
+ else
ret = wl12xx_cmd_role_start_sta(wl, wlvif);
- }
return ret;
}
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 906be6aa4eb6f..a0647d4384d2b 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -556,9 +556,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip,
/* Each RX/TX transaction requires an end-of-transaction transfer */
#define WLCORE_QUIRK_END_OF_TRANSACTION BIT(0)
-/* the first start_role(sta) sometimes doesn't work on wl12xx */
-#define WLCORE_QUIRK_START_STA_FAILS BIT(1)
-
/* wl127x and SPI don't support SDIO block size alignment */
#define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN BIT(2)
--
2.27.0