If CONFIG_ATH9K=y, the following errors will be seen while compiling
gpio.c
drivers/net/wireless/ath/ath9k/gpio.o: In function `ath_deinit_leds':
gpio.c:(.text+0x604): undefined reference to `led_classdev_unregister'
gpio.c:(.text+0x604): relocation truncated to fit: R_AARCH64_CALL26
against undefined symbol `led_classdev_unregister'
drivers/net/wireless/ath/ath9k/gpio.o: In function `ath_init_leds':
gpio.c:(.text+0x708): undefined reference to `led_classdev_register_ext'
gpio.c:(.text+0x708): relocation truncated to fit: R_AARCH64_CALL26
against undefined symbol `led_classdev_register_ext'
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhang Jianhua <[email protected]>
---
drivers/net/wireless/ath/ath9k/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index e150d82eddb6..cba91e948c43 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -24,6 +24,7 @@ config ATH9K
select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211
select ATH9K_HW
select ATH9K_COMMON
+ select LEDS_CLASS
help
This module adds support for wireless adapters based on
Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
--
2.17.1
On Fri 2021-03-26 16:13:51, Zhang Jianhua wrote:
> If CONFIG_ATH9K=y, the following errors will be seen while compiling
> gpio.c
>
> drivers/net/wireless/ath/ath9k/gpio.o: In function `ath_deinit_leds':
> gpio.c:(.text+0x604): undefined reference to `led_classdev_unregister'
> gpio.c:(.text+0x604): relocation truncated to fit: R_AARCH64_CALL26
> against undefined symbol `led_classdev_unregister'
> drivers/net/wireless/ath/ath9k/gpio.o: In function `ath_init_leds':
> gpio.c:(.text+0x708): undefined reference to `led_classdev_register_ext'
> gpio.c:(.text+0x708): relocation truncated to fit: R_AARCH64_CALL26
> against undefined symbol `led_classdev_register_ext'
>
> Reported-by: Hulk Robot <[email protected]>
> Signed-off-by: Zhang Jianhua <[email protected]>
a) please cc led lists with led issue.
b) probably does not work as LED_CLASS depends on NEW_LEDS...?
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
Hi!
> hello Pavel，thanks for your reply.
>
> for the a point, I don't know the led lists and cannot find it.
>
> for the b point, I look other configs who select LEDS_CLASS, almost all of
> them select NEW_LEDS，maybe you are right, CONFIG_ATH9K also need select
> NEW_LEDS too.
See MAINTAINERS file.
Pavel
--
http://www.livejournal.com/~pavelmachek