After reboot with kernel & firmware updates I found `failed to copy
target iram contents:` in dmesg and missing wlan interfaces for both
of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
it, so while I have no idea what's actually happening, I don't see why
we should fail in this case, looks like some optional firmware ability
that could be skipped.
Also with additional logging there is
```
[ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
[ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
[ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
```
so exact branch could be seen.
---
drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2f9be182fbfb..d9fd5294e142 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
u32 len, remaining_len;
hw_mem = ath10k_coredump_get_mem_layout(ar);
- if (!hw_mem)
+ if (!hw_mem) {
+ ath10k_warn(ar, "No hardware memory");
return -ENOMEM;
+ }
for (i = 0; i < hw_mem->region_table.size; i++) {
tmp = &hw_mem->region_table.regions[i];
@@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
}
}
- if (!mem_region)
+ if (!mem_region) {
+ ath10k_warn(ar, "No memory region");
return -ENOMEM;
+ }
for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
if (ar->wmi.mem_chunks[i].req_id ==
@@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (status) {
ath10k_warn(ar, "failed to copy target iram contents: %d",
status);
- goto err_hif_stop;
}
}
--
2.32.0