Hello,
I've got a Kernel-2.6.23 running on my Targetsystem (M54455EVB) and
compiled "compat-wireless-2.6-old" for that system, for using a D-Link
DWA-547 with AR5416 chip.
I successfully loaded all necessary modules (cfg80211.ko mac80211.ko
ath9k.ko) and "insmod"-ed them.
The ath9k driver responded after loading:
/
ath9k: 0.1
PCI: Enabling device 0000:00:14.0 (0000 -> 0002)
Registered led device: ath9k-phy0:radio
Registered led device: ath9k-phy0:assoc
Registered led device: ath9k-phy0:tx
Registered led device: ath9k-phy0:rx
phy0: Atheros 5416: mem=0xa0000000, irq=67/
which seams like it works.
with "ifconfig wlan0 up" I can bring the system up and can check it with
"ifconfig wlan0"
/
wlan0 Link encap:Ethernet HWaddr 00:19:5B:43:F5:ED
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wmaster0 Link encap:UNSPEC HWaddr
00-19-5B-43-F5-ED-80-1D-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)/
additionally I installed the actual "wireless tools for Linux"-Package
in version 29 from
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html to be
compatible with the
new stack from compat-wireless-2.6-old.
But trying to configure the device creates the following
Kernel-error-message:
/
iwconfig wlan0 essid wireless
/ # WARNING: at
/home/stefan/00_Targetsourcen/compat-wireless-2.6-old/net/mac80211/tx.c:1264
ieee80211_tx()
Stack from cf5a1ea0:
<0> cf5a1eb0<0> cf968691<0> d006d1d6<0> d007720d<0> d0077283<0>
000004f0<0> d00756b4<0> 00000000
<0> c002c8e8(printk+0x0/0x1e)<0> c01ab8ec(kfree_skb+0x0/0x26)<0>
c01ba90c(net_ratelimit+0x0/0x18)<0> c0025258(dump_stack+0x0/0x16)<0>
cf58edc0<0> cf58edc0<0> cf86e000<0> c01b0d1e(dev_hard_start_xmit+0x0/0x212)
<0> c01acf58(skb_segment+0x106/0x55e)<0> edc0cf1b<0> e000cf96<0>
8180cf1b<0> e3800000<0> 00000000<0> 0000cf96<0> 9a2a0000
<0> 00000000<0> 00000000<0> 00406c65<0> 00000000<0>
c01bd14e(__qdisc_run+0x4a/0x156)<0> cf58edc0<0> cf86e000<0> 00000000
<0> c002c8e8(printk+0x0/0x1e)<0> cfe5687c<0>
c0047158(__print_symbol+0x0/0x32)<0> cf86e000<0> cf58edc0<0> cf1be000<0>
d0062726<0> c01b322c(dev_queue_xmit+0x202/0x252)
<0> cf86e000<0> cfe566c0<0> cf968180<0> cf968040<0> d006285e<0>
cf58edc0<0> cf58edc0<0> 00000000
Call Trace:
<0> [<c0038c08>]<0> [<c0038b7e>]<0> [<c003c08c>]<0> [<c02248a0>]
<0> [<c003bccc>]<0> [<c003c126>]<0> [<c00390fa>]<0> [<c0039736>]
<0> [<c0224ce2>]<0> [<c003bccc>]<0> [<c003906e>]<0> [<c0026ec8>]
<0> [<c00216fa>]<0> [<c003c22e>]<0> [<c003bd34>]<0> [<c003bcda>]
<0> [<c02248a0>]<0> [<c0021734>]/
Moreover even displaying the cardsetup with "iwconfig wlan0" or
displaying the accessable networks with "iwlist scan" throws the
errormessage "Illegal instruction". I grep-ed for that expression in
sources of "wireless tools for linux", compat-wirless-2.6-old and
kernel-sources but couldn't find it ... could this string be sent by the
card?
I looked up the /compat-wireless-2.6-old/net/mac80211/tx.c:1264 and
found the following:
Line:
1250 * possible to have happened.
*/
if (!__netif_subqueue_stopped(local->mdev, queue)) {
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,22))
clear_bit(IEEE80211_LINK_STATE_PENDING,
1255 &local->state[queue]);
#else
clear_bit(queue, local->queues_pending);
#endif
retries++;
1260 /*
* Driver bug, it's rejecting packets but
* not stopping queues.
*/
1264 if (WARN_ON_ONCE(retries > 5))
goto drop;
goto retry;
}
store->skb = skb;
store->extra_frag = tx.extra_frag;
store->num_extra_frag = tx.num_extra_frag;
store->last_frag_rate_idx = tx.last_frag_rate_idx;
store->last_frag_rate_ctrl_probe =
!!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG);
}
out:
rcu_read_unlock();
return 0;
drop:
1280 if (skb)
/Has anybody an idea whats going wrong?
Thanks a lot for your help and time
regards
Stefan Hittmeyer
On Mon, Sep 15, 2008 at 01:32:34AM -0700, sHittmeyer wrote:
> additionally I installed the actual "wireless tools for Linux"-Package
> in version 29 from
> http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html to be
> compatible with the
> new stack from compat-wireless-2.6-old.
> But trying to configure the device creates the following
> Kernel-error-message:
compat-wireless-old just got a new update, give that a shot. But also be
aware that compat-wireless-old is just that -- old so resources are
dedicated more to >= 2.6.27 right now; at least for ath9k.
Luis