From: Sean Wang <[email protected]>
Add MU EDCA MCU command support to update MU AC parameter record field
from the access point.
Co-developed-by: Eric-SY Chang <[email protected]>
Signed-off-by: Eric-SY Chang <[email protected]>
Tested-by: Eric-SY Chang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
---
v2: add the cosmetics changes suggested from Lorenzo
---
.../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 +
.../net/wireless/mediatek/mt76/mt7921/mcu.c | 55 ++++++++++++++++++-
2 files changed, 53 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index 848f43c44258..751e621a6f9b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -572,6 +572,7 @@ enum {
MCU_CMD_SCHED_SCAN_ENABLE = MCU_CE_PREFIX | 0x61,
MCU_CMD_SCHED_SCAN_REQ = MCU_CE_PREFIX | 0x62,
MCU_CMD_GET_NIC_CAPAB = MCU_CE_PREFIX | 0x8a,
+ MCU_CMD_SET_MU_EDCA_PARMS = MCU_CE_PREFIX | 0xb0,
MCU_CMD_REG_WRITE = MCU_CE_PREFIX | 0xc0,
MCU_CMD_REG_READ = MCU_CE_PREFIX | MCU_QUERY_MASK | 0xc0,
MCU_CMD_CHIP_CONFIG = MCU_CE_PREFIX | 0xca,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 3f6c9839d9d4..457365f40d30 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -974,7 +974,30 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
.total = IEEE80211_NUM_ACS,
};
struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
- int ac;
+ struct mu_edca {
+ u8 cw_min;
+ u8 cw_max;
+ u8 aifsn;
+ u8 acm;
+ u8 timer;
+ u8 padding[3];
+ };
+ struct mt7921_mcu_mu_tx {
+ u8 ver;
+ u8 pad0;
+ __le16 len;
+ u8 bss_idx;
+ u8 qos;
+ u8 wmm_idx;
+ u8 pad1;
+ struct mu_edca edca[IEEE80211_NUM_ACS];
+ u8 pad3[32];
+ } __packed req_mu = {
+ .bss_idx = mvif->mt76.idx,
+ .qos = vif->bss_conf.qos,
+ .wmm_idx = mvif->mt76.wmm_idx,
+ };
+ int ac, ret;
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac];
@@ -995,8 +1018,34 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
else
e->cw_max = cpu_to_le16(10);
}
- return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
- sizeof(req), true);
+
+ ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
+ sizeof(req), true);
+ if (ret)
+ return ret;
+
+ if (!vif->bss_conf.he_support)
+ return 0;
+
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ struct ieee80211_he_mu_edca_param_ac_rec *q;
+ struct mu_edca *e;
+ int to_aci[] = {1, 0, 2, 3};
+
+ if (!mvif->queue_params[ac].mu_edca)
+ break;
+
+ q = &mvif->queue_params[ac].mu_edca_param_rec;
+ e = &(req_mu.edca[to_aci[ac]]);
+
+ e->cw_min = q->ecw_min_max & 0xf;
+ e->cw_max = (q->ecw_min_max & 0xf0) >> 4;
+ e->aifsn = q->aifsn;
+ e->timer = q->mu_edca_timer;
+ }
+
+ return mt76_mcu_send_msg(&dev->mt76, MCU_CMD_SET_MU_EDCA_PARMS, &req_mu,
+ sizeof(req_mu), false);
}
int mt7921_mcu_set_chan_info(struct mt7921_phy *phy, int cmd)
--
2.25.1