This patch extend device_dump debugfs function to make it
works for usb interface.
For command timeouts, USB firmware will automatically emit
firmware dump events, so we don't implement device_dump().
For user-initiated dumps, we trigger it by issue firmware
dump event command to firmware, as there is no command
response, do not start 10s timer.
Signed-off-by: Xinming Hu <[email protected]>
Signed-off-by: Cathy Luo <[email protected]>
---
v2: Same as v1
v3: Add more comments Regards the different dump mechanism
between usb and other interfaces.(Brian Norris)
---
drivers/net/wireless/marvell/mwifiex/cmdevt.c | 11 +++++++----
drivers/net/wireless/marvell/mwifiex/debugfs.c | 13 +++++++++----
drivers/net/wireless/marvell/mwifiex/fw.h | 1 +
drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 4 ++++
4 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cmdevt.c b/drivers/net/wireless/marvell/mwifiex/cmdevt.c
index dcc529e..8746600 100644
--- a/drivers/net/wireless/marvell/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/marvell/mwifiex/cmdevt.c
@@ -290,13 +290,16 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
adapter->dbg.last_cmd_act[adapter->dbg.last_cmd_index] =
get_unaligned_le16((u8 *)host_cmd + S_DS_GEN);
+ /* Setup the timer after transmit command, except that specific
+ * command might not have command response.
+ */
+ if (cmd_code != HostCmd_CMD_FW_DUMP_EVENT)
+ mod_timer(&adapter->cmd_timer,
+ jiffies + msecs_to_jiffies(MWIFIEX_TIMER_10S));
+
/* Clear BSS_NO_BITS from HostCmd */
cmd_code &= HostCmd_CMD_ID_MASK;
- /* Setup the timer after transmit command */
- mod_timer(&adapter->cmd_timer,
- jiffies + msecs_to_jiffies(MWIFIEX_TIMER_10S));
-
return 0;
}
diff --git a/drivers/net/wireless/marvell/mwifiex/debugfs.c b/drivers/net/wireless/marvell/mwifiex/debugfs.c
index 6f4239b..db2872d 100644
--- a/drivers/net/wireless/marvell/mwifiex/debugfs.c
+++ b/drivers/net/wireless/marvell/mwifiex/debugfs.c
@@ -168,10 +168,15 @@
{
struct mwifiex_private *priv = file->private_data;
- if (!priv->adapter->if_ops.device_dump)
- return -EIO;
-
- priv->adapter->if_ops.device_dump(priv->adapter);
+ /* For command timeouts, USB firmware will automatically emit
+ * firmware dump events, so we don't implement device_dump().
+ * For user-initiated dumps, we trigger it ourselves.
+ */
+ if (priv->adapter->iface_type == MWIFIEX_USB)
+ mwifiex_send_cmd(priv, HostCmd_CMD_FW_DUMP_EVENT,
+ HostCmd_ACT_GEN_SET, 0, NULL, true);
+ else
+ priv->adapter->if_ops.device_dump(priv->adapter);
return 0;
}
diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index 4d5e686..9c2cdef 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -409,6 +409,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
#define HostCmd_CMD_TDLS_CONFIG 0x0100
#define HostCmd_CMD_MC_POLICY 0x0121
#define HostCmd_CMD_TDLS_OPER 0x0122
+#define HostCmd_CMD_FW_DUMP_EVENT 0x0125
#define HostCmd_CMD_SDIO_SP_RX_AGGR_CFG 0x0223
#define HostCmd_CMD_CHAN_REGION_CFG 0x0242
#define HostCmd_CMD_PACKET_AGGR_CTRL 0x0251
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
index fb09014..211e47d 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
@@ -2206,6 +2206,10 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
case HostCmd_CMD_CHAN_REGION_CFG:
ret = mwifiex_cmd_chan_region_cfg(priv, cmd_ptr, cmd_action);
break;
+ case HostCmd_CMD_FW_DUMP_EVENT:
+ cmd_ptr->command = cpu_to_le16(cmd_no);
+ cmd_ptr->size = cpu_to_le16(S_DS_GEN);
+ break;
default:
mwifiex_dbg(priv->adapter, ERROR,
"PREP_CMD: unknown cmd- %#x\n", cmd_no);
--
1.9.1
Xinming Hu <[email protected]> writes:
> This patch extend device_dump debugfs function to make it
> works for usb interface.
>
> For command timeouts, USB firmware will automatically emit
> firmware dump events, so we don't implement device_dump().
>
> For user-initiated dumps, we trigger it by issue firmware
> dump event command to firmware, as there is no command
> response, do not start 10s timer.
>
> Signed-off-by: Xinming Hu <[email protected]>
> Signed-off-by: Cathy Luo <[email protected]>
> ---
> v2: Same as v1
> v3: Add more comments Regards the different dump mechanism
> between usb and other interfaces.(Brian Norris)
Please always resubmit the whole patchset, not individual patches:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#resubmit_the_whole_patchset
Also please don't use that awkward "RESEND" stuff some people seem to
insist using. So instead of doing like this:
v2, v3, v3 RESEND, v4
do it like this which makes my life easier:
v2, v3, v4, v5
It's not like we are running out of version numbers :)
--
Kalle Valo