Hi, my name is Cristian, I'm writing from Chile
I'm trying to install the driver for my RTL8821CE card. I'm following
the instructions from the repo https://github.com/lwfinger/rtw88 (I
took the email from there) but when I try to run the "make" command, I
get the following error:
/home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
‘rtw_core_init’:
/home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
implicit declaration of function ‘tasklet_setup’
[-Werror=implicit-function-declaration]
1623 | tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
this is the output from "sudo lshw -C network" and the full log of the error.
===========
cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 15
serial: 84:2a:fd:5a:7f:6e
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd
autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169
firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes
port=MII
resources: irq:19 ioport:4000(size=256)
memory:80504000-80504fff memory:80500000-80503fff
*-network UNCLAIMED
description: Network controller
product: RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: ioport:3000(size=256) memory:80400000-8040ffff
cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$ ls
bf.c debug.o mac80211.o phy.c
rtw8723de.h rtw8821c_table.c rtw8822ce.c sec.c
bf.h dkms.conf mac.c phy.h
rtw8723d_fw.bin rtw8821c_table.h rtw8822ce.h sec.h
bitfield.h efuse.c mac.h ps.c rtw8723d.h
rtw8822b.c rtw8822c_fw.bin sign-file
certificate.p12 efuse.h main.c ps.h
rtw8723d_table.c rtw8822be.c rtw8822c.h tx.c
certificate.pem fw.c main.h README.md
rtw8723d_table.h rtw8822be.h rtw8822c_table.c tx.h
coex.c fw.h main.o regd.c rtw8821c.c
rtw8822b_fw.bin rtw8822c_table.h util.c
coex.h hci.h Makefile regd.h
rtw8821ce.c rtw8822b.h rtw8822c_wow_fw.bin util.h
compiler.h kernel_key.pem openssl.conf reg.h
rtw8821ce.h rtw8822b_table.c rx.c util.o
debug.c key.pem pci.c rtw8723d.c
rtw8821c_fw.bin rtw8822b_table.h rx.h wow.c
debug.h mac80211.c pci.h rtw8723de.c rtw8821c.h
rtw8822c.c sch_generic.h wow.h
cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$ make
make -C /lib/modules/5.4.0-42-generic/build
M=/home/cristian/Downloads/realtek_drivers/rtw88 modules
make1: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'
CC M /home/cristian/Downloads/realtek_drivers/rtw88/main.o
/home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
rtw_core_init:
/home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
implicit declaration of function tasklet_setup
-Werror=implicit-function-declaration
1623 tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
cc1: some warnings being treated as errors
make2: *** scripts/Makefile.build:275:
/home/cristian/Downloads/realtek_drivers/rtw88/main.o Error 1
make1: *** Makefile:1731: /home/cristian/Downloads/realtek_drivers/rtw88 Error 2
make1: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'
make: *** Makefile:79: all Error 2
cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
sudo make install
sudo password for cristian:
make -C /lib/modules/5.4.0-42-generic/build
M=/home/cristian/Downloads/realtek_drivers/rtw88 modules
make1: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'
CC M /home/cristian/Downloads/realtek_drivers/rtw88/main.o
/home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
rtw_core_init:
/home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
implicit declaration of function tasklet_setup
-Werror=implicit-function-declaration
1623 | tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
cc1: some warnings being treated as errors
make2: *** scripts/Makefile.build:275:
/home/cristian/Downloads/realtek_drivers/rtw88/main.o Error 1
make1: *** Makefile:1731: /home/cristian/Downloads/realtek_drivers/rtw88 Error 2
make1: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'
make: *** Makefile:79: all Error 2
cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
===========
Thanks, and greetings from Chile!
--
Cristian Llanos Montenegro
+56 9 9618 8576
On 10/5/20 2:46 PM, Cristian Llanos wrote:
> Hi, my name is Cristian, I'm writing from Chile
>
> I'm trying to install the driver for my RTL8821CE card. I'm following
> the instructions from the repo https://github.com/lwfinger/rtw88 (I
> took the email from there) but when I try to run the "make" command, I
> get the following error:
>
> /home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
> ‘rtw_core_init’:
> /home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
> implicit declaration of function ‘tasklet_setup’
> [-Werror=implicit-function-declaration]
> 1623 | tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
>
>
> this is the output from "sudo lshw -C network" and the full log of the error.
>
> ===========
>
>
> cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
> sudo lshw -C network
> *-network
> description: Ethernet interface
> product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
> vendor: Realtek Semiconductor Co., Ltd.
> physical id: 0
> bus info: pci@0000:01:00.0
> logical name: enp1s0
> version: 15
> serial: 84:2a:fd:5a:7f:6e
> capacity: 1Gbit/s
> width: 64 bits
> clock: 33MHz
> capabilities: pm msi pciexpress msix bus_master cap_list
> ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd
> autonegotiation
> configuration: autonegotiation=on broadcast=yes driver=r8169
> firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes
> port=MII
> resources: irq:19 ioport:4000(size=256)
> memory:80504000-80504fff memory:80500000-80503fff
> *-network UNCLAIMED
> description: Network controller
> product: RTL8821CE 802.11ac PCIe Wireless Network Adapter
> vendor: Realtek Semiconductor Co., Ltd.
> physical id: 0
> bus info: pci@0000:02:00.0
> version: 00
> width: 64 bits
> clock: 33MHz
> capabilities: pm msi pciexpress cap_list
> configuration: latency=0
> resources: ioport:3000(size=256) memory:80400000-8040ffff
> cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
>
> cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$ ls
> bf.c debug.o mac80211.o phy.c
> rtw8723de.h rtw8821c_table.c rtw8822ce.c sec.c
> bf.h dkms.conf mac.c phy.h
> rtw8723d_fw.bin rtw8821c_table.h rtw8822ce.h sec.h
> bitfield.h efuse.c mac.h ps.c rtw8723d.h
> rtw8822b.c rtw8822c_fw.bin sign-file
> certificate.p12 efuse.h main.c ps.h
> rtw8723d_table.c rtw8822be.c rtw8822c.h tx.c
> certificate.pem fw.c main.h README.md
> rtw8723d_table.h rtw8822be.h rtw8822c_table.c tx.h
> coex.c fw.h main.o regd.c rtw8821c.c
> rtw8822b_fw.bin rtw8822c_table.h util.c
> coex.h hci.h Makefile regd.h
> rtw8821ce.c rtw8822b.h rtw8822c_wow_fw.bin util.h
> compiler.h kernel_key.pem openssl.conf reg.h
> rtw8821ce.h rtw8822b_table.c rx.c util.o
> debug.c key.pem pci.c rtw8723d.c
> rtw8821c_fw.bin rtw8822b_table.h rx.h wow.c
> debug.h mac80211.c pci.h rtw8723de.c rtw8821c.h
> rtw8822c.c sch_generic.h wow.h
>
> cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$ make
> make -C /lib/modules/5.4.0-42-generic/build
> M=/home/cristian/Downloads/realtek_drivers/rtw88 modules
> make1: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'
> CC M /home/cristian/Downloads/realtek_drivers/rtw88/main.o
> /home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
> rtw_core_init:
> /home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
> implicit declaration of function tasklet_setup
> -Werror=implicit-function-declaration
> 1623 tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
>
> cc1: some warnings being treated as errors
> make2: *** scripts/Makefile.build:275:
> /home/cristian/Downloads/realtek_drivers/rtw88/main.o Error 1
> make1: *** Makefile:1731: /home/cristian/Downloads/realtek_drivers/rtw88 Error 2
> make1: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'
> make: *** Makefile:79: all Error 2
>
> cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
> sudo make install
> sudo password for cristian:
> make -C /lib/modules/5.4.0-42-generic/build
> M=/home/cristian/Downloads/realtek_drivers/rtw88 modules
> make1: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'
> CC M /home/cristian/Downloads/realtek_drivers/rtw88/main.o
> /home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
> rtw_core_init:
> /home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
> implicit declaration of function tasklet_setup
> -Werror=implicit-function-declaration
> 1623 | tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
>
> cc1: some warnings being treated as errors
> make2: *** scripts/Makefile.build:275:
> /home/cristian/Downloads/realtek_drivers/rtw88/main.o Error 1
> make1: *** Makefile:1731: /home/cristian/Downloads/realtek_drivers/rtw88 Error 2
> make1: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'
> make: *** Makefile:79: all Error 2
>
> cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
>
>
> ===========
You need to do a git pull. The missing tasklet_setup was fixed on Sep. 26.
Larry
Larry thanks a lot for your response, and you were right about the git
pull, the code worked just fine.
But i'm still unable to connect my laptop to the internet. I made:
$ git pull
$ make
$ sudo make install (everything ok!)
And then, reboot.
But now i go to the Settings panel (Ubuntu 20.04.1 LTS) and i'm still
unable to connect.
Let me show you some logs:
===
$ lsmod | grep rtw
rtw_8821ce 16384 0
rtw_8821c 77824 1 rtw_8821ce
rtw_pci 24576 1 rtw_8821ce
rtw_core 167936 2 rtw_8821c,rtw_pci
mac80211 843776 2 rtw_core,rtw_pci
cfg80211 704512 2 rtw_core,mac80211
$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 15
serial: 84:2a:fd:5a:7f:6e
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd
autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169
firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes
port=MII
resources: irq:19 ioport:4000(size=256)
memory:80504000-80504fff memory:80500000-80503fff
*-network UNCLAIMED
description: Network controller
product: RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: ioport:3000(size=256) memory:80400000-8040ffff
===
May I still need to do something else?
Thanks Larry for your time.
On Mon, Oct 5, 2020 at 5:46 PM Larry Finger <[email protected]> wrote:
>
> On 10/5/20 2:46 PM, Cristian Llanos wrote:
> > Hi, my name is Cristian, I'm writing from Chile
> >
> > I'm trying to install the driver for my RTL8821CE card. I'm following
> > the instructions from the repo https://github.com/lwfinger/rtw88 (I
> > took the email from there) but when I try to run the "make" command, I
> > get the following error:
> >
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
> > ‘rtw_core_init’:
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
> > implicit declaration of function ‘tasklet_setup’
> > [-Werror=implicit-function-declaration]
> > 1623 | tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
> >
> >
> > this is the output from "sudo lshw -C network" and the full log of the error.
> >
> > ===========
> >
> >
> > cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
> > sudo lshw -C network
> > *-network
> > description: Ethernet interface
> > product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
> > vendor: Realtek Semiconductor Co., Ltd.
> > physical id: 0
> > bus info: pci@0000:01:00.0
> > logical name: enp1s0
> > version: 15
> > serial: 84:2a:fd:5a:7f:6e
> > capacity: 1Gbit/s
> > width: 64 bits
> > clock: 33MHz
> > capabilities: pm msi pciexpress msix bus_master cap_list
> > ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd
> > autonegotiation
> > configuration: autonegotiation=on broadcast=yes driver=r8169
> > firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes
> > port=MII
> > resources: irq:19 ioport:4000(size=256)
> > memory:80504000-80504fff memory:80500000-80503fff
> > *-network UNCLAIMED
> > description: Network controller
> > product: RTL8821CE 802.11ac PCIe Wireless Network Adapter
> > vendor: Realtek Semiconductor Co., Ltd.
> > physical id: 0
> > bus info: pci@0000:02:00.0
> > version: 00
> > width: 64 bits
> > clock: 33MHz
> > capabilities: pm msi pciexpress cap_list
> > configuration: latency=0
> > resources: ioport:3000(size=256) memory:80400000-8040ffff
> > cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
> >
> > cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$ ls
> > bf.c debug.o mac80211.o phy.c
> > rtw8723de.h rtw8821c_table.c rtw8822ce.c sec.c
> > bf.h dkms.conf mac.c phy.h
> > rtw8723d_fw.bin rtw8821c_table.h rtw8822ce.h sec.h
> > bitfield.h efuse.c mac.h ps.c rtw8723d.h
> > rtw8822b.c rtw8822c_fw.bin sign-file
> > certificate.p12 efuse.h main.c ps.h
> > rtw8723d_table.c rtw8822be.c rtw8822c.h tx.c
> > certificate.pem fw.c main.h README.md
> > rtw8723d_table.h rtw8822be.h rtw8822c_table.c tx.h
> > coex.c fw.h main.o regd.c rtw8821c.c
> > rtw8822b_fw.bin rtw8822c_table.h util.c
> > coex.h hci.h Makefile regd.h
> > rtw8821ce.c rtw8822b.h rtw8822c_wow_fw.bin util.h
> > compiler.h kernel_key.pem openssl.conf reg.h
> > rtw8821ce.h rtw8822b_table.c rx.c util.o
> > debug.c key.pem pci.c rtw8723d.c
> > rtw8821c_fw.bin rtw8822b_table.h rx.h wow.c
> > debug.h mac80211.c pci.h rtw8723de.c rtw8821c.h
> > rtw8822c.c sch_generic.h wow.h
> >
> > cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$ make
> > make -C /lib/modules/5.4.0-42-generic/build
> > M=/home/cristian/Downloads/realtek_drivers/rtw88 modules
> > make1: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'
> > CC M /home/cristian/Downloads/realtek_drivers/rtw88/main.o
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
> > rtw_core_init:
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
> > implicit declaration of function tasklet_setup
> > -Werror=implicit-function-declaration
> > 1623 tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
> >
> > cc1: some warnings being treated as errors
> > make2: *** scripts/Makefile.build:275:
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.o Error 1
> > make1: *** Makefile:1731: /home/cristian/Downloads/realtek_drivers/rtw88 Error 2
> > make1: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'
> > make: *** Makefile:79: all Error 2
> >
> > cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
> > sudo make install
> > sudo password for cristian:
> > make -C /lib/modules/5.4.0-42-generic/build
> > M=/home/cristian/Downloads/realtek_drivers/rtw88 modules
> > make1: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'
> > CC M /home/cristian/Downloads/realtek_drivers/rtw88/main.o
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.c: In function
> > rtw_core_init:
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.c:1623:2: error:
> > implicit declaration of function tasklet_setup
> > -Werror=implicit-function-declaration
> > 1623 | tasklet_setup(&rtwdev->tx_tasklet, rtw_tx_tasklet);
> >
> > cc1: some warnings being treated as errors
> > make2: *** scripts/Makefile.build:275:
> > /home/cristian/Downloads/realtek_drivers/rtw88/main.o Error 1
> > make1: *** Makefile:1731: /home/cristian/Downloads/realtek_drivers/rtw88 Error 2
> > make1: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'
> > make: *** Makefile:79: all Error 2
> >
> > cristian@cristian-HP-240-G7-Notebook-PC:~/Downloads/realtek_drivers/rtw88$
> >
> >
> > ===========
>
> You need to do a git pull. The missing tasklet_setup was fixed on Sep. 26.
>
> Larry
>
--
Cristian Llanos Montenegro
+56 9 9618 8576
On 10/5/20 4:36 PM, Cristian Llanos wrote:
> $ lsmod | grep rtw
> rtw_8821ce 16384 0
> rtw_8821c 77824 1 rtw_8821ce
> rtw_pci 24576 1 rtw_8821ce
> rtw_core 167936 2 rtw_8821c,rtw_pci
> mac80211 843776 2 rtw_core,rtw_pci
> cfg80211 704512 2 rtw_core,mac80211
>
The drivers look OK.
Try the following commands:
iw dev | grep Interface
sudo iw dev XXXXX scan | egrep "signal|SSID"
Replace the XXXXX with the device name listed on the "Interface" line following
the first command. Post the output of the second command and indicate which SSID
is from your AP.
Larry
On 10/6/20 7:31 PM, Cristian Llanos wrote:
> Actually, the first command outputs nothing..
>
That means that it has not created a wireless interface.
Does the output of the dmesg command show any information?
Larry
Yes it does. The last lines are strange, missing a country code?
===
[ 0.000000] microcode: microcode updated early to revision 0x368,
date = 2019-04-23
[ 0.000000] Linux version 5.4.0-48-generic (buildd@lcy01-amd64-023)
(gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #52~18.04.1-Ubuntu
SMP Thu Sep 10 12:50:22 UTC 2020 (Ubuntu 5.4.0-48.52~18.04.1-generic
5.4.60)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic
root=UUID=bda2f6db-fceb-496e-a089-e310c0f91638 ro quiet splash
vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007a7e7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a7e8000-0x000000007a869fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a86a000-0x000000007a87bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a87c000-0x000000007b5acfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b5ad000-0x000000007ba3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ba3d000-0x000000007bc08fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc09000-0x000000007bfc4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x746dd018-0x746ed057] usable ==> usable
[ 0.000000] e820: update [mem 0x746dd018-0x746ed057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem
0x0000000000000000-0x000000000003efff] usable
[ 0.000000] reserve setup_data: [mem
0x000000000003f000-0x000000000003ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem
0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem
0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem
0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] reserve setup_data: [mem
0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] reserve setup_data: [mem
0x0000000020200000-0x00000000746dd017] usable
[ 0.000000] reserve setup_data: [mem
0x00000000746dd018-0x00000000746ed057] usable
[ 0.000000] reserve setup_data: [mem
0x00000000746ed058-0x000000007a7e7fff] usable
[ 0.000000] reserve setup_data: [mem
0x000000007a7e8000-0x000000007a869fff] reserved
[ 0.000000] reserve setup_data: [mem
0x000000007a86a000-0x000000007a87bfff] ACPI data
[ 0.000000] reserve setup_data: [mem
0x000000007a87c000-0x000000007b5acfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem
0x000000007b5ad000-0x000000007ba3cfff] reserved
[ 0.000000] reserve setup_data: [mem
0x000000007ba3d000-0x000000007bc08fff] usable
[ 0.000000] reserve setup_data: [mem
0x000000007bc09000-0x000000007bfc4fff] reserved
[ 0.000000] reserve setup_data: [mem
0x000000007bfc5000-0x000000007bffffff] usable
[ 0.000000] reserve setup_data: [mem
0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem
0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem
0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] reserve setup_data: [mem
0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem
0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x7b9de218 ACPI=0x7a86d000 ACPI
2.0=0x7a86d000 SMBIOS=0x7b827d18 TPMEventLog=0x746ee018
[ 0.000000] [Firmware Bug]: TPM Final Events table missing or invalid
[ 0.000000] secureboot: Secure boot enabled
[ 0.000000] Kernel is locked down from EFI Secure Boot mode; see
man kernel_lockdown.7
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Inspiron 15-3552/0C004Y, BIOS 4.0.7 04/26/2016
[ 0.000000] tsc: Detected 1600.000 MHz processor
[ 0.000211] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000215] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000234] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000241] MTRR default type: uncachable
[ 0.000243] MTRR fixed ranges enabled:
[ 0.000246] 00000-9FFFF write-back
[ 0.000249] A0000-FFFFF uncachable
[ 0.000251] MTRR variable ranges enabled:
[ 0.000254] 0 base 000000000 mask F80000000 write-back
[ 0.000257] 1 base 07C800000 mask FFF800000 uncachable
[ 0.000260] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000263] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000265] 4 base 100000000 mask F80000000 write-back
[ 0.000267] 5 disabled
[ 0.000269] 6 disabled
[ 0.000270] 7 disabled
[ 0.000381] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000511] total RAM covered: 4040M
[ 0.001831] Found optimal setting for mtrr clean up
[ 0.001834] gran_size: 64K chunk_size: 64M num_reg: 5
lose cover RAM: 0G
[ 0.001925] e820: update [mem 0x7c800000-0xffffffff] usable ==> reserved
[ 0.001934] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.020240] esrt: Reserving ESRT space from 0x000000007b9de218 to
0x000000007b9de250.
[ 0.020265] check: Scanning 1 areas for low memory corruption
[ 0.022454] secureboot: Secure boot enabled
[ 0.022457] RAMDISK: [mem 0x3c77f000-0x3ee6efff]
[ 0.022477] ACPI: Early table checksum verification disabled
[ 0.022485] ACPI: RSDP 0x000000007A86D000 000024 (v02 DELL )
[ 0.022494] ACPI: XSDT 0x000000007A86D0A8 0000CC (v01 DELL WN09
01072009 AMI 00010013)
[ 0.022511] ACPI: FACP 0x000000007A877620 00010C (v05 DELL WN09
01072009 AMI 00010013)
[ 0.022523] ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Gpe0Block: 128/32 (20190816/tbfadt-569)
[ 0.022534] ACPI: DSDT 0x000000007A86D200 00A41B (v02 DELL WN09
01072009 INTL 20120913)
[ 0.022543] ACPI: FACS 0x000000007B5AAE80 000040
[ 0.022550] ACPI: APIC 0x000000007A877730 000084 (v03 DELL WN09
01072009 AMI 00010013)
[ 0.022557] ACPI: FPDT 0x000000007A8777B8 000044 (v01 DELL WN09
01072009 AMI 00010013)
[ 0.022565] ACPI: FIDT 0x000000007A877800 00009C (v01 DELL WN09
01072009 AMI 00010013)
[ 0.022573] ACPI: MCFG 0x000000007A8778A0 00003C (v01 DELL WN09
01072009 MSFT 00000097)
[ 0.022581] ACPI: BOOT 0x000000007A8778E0 000028 (v01 DELL WN09
01072009 AMI 00010013)
[ 0.022588] ACPI: SLIC 0x000000007A877908 000176 (v01 ALWARE
ALIENWRE 01072009 AMI 00010013)
[ 0.022596] ACPI: SLIC 0x000000007A877A80 000176 (v01 DELL WN09
01072009 AMI 00010013)
[ 0.022604] ACPI: HPET 0x000000007A877BF8 000038 (v01 DELL WN09
01072009 AMI. 00000006)
[ 0.022612] ACPI: SSDT 0x000000007A877C30 000763 (v01 PmRef CpuPm
00003000 INTL 20061109)
[ 0.022620] ACPI: SSDT 0x000000007A878398 000290 (v01 PmRef
Cpu0Tst 00003000 INTL 20061109)
[ 0.022628] ACPI: SSDT 0x000000007A878628 00017A (v01 PmRef ApTst
00003000 INTL 20061109)
[ 0.022636] ACPI: UEFI 0x000000007A8787A8 000042 (v01 DELL WN09
00000000 00000000)
[ 0.022646] ACPI: SSDT 0x000000007A8787F0 000427 (v01 Intel_
Tpm2Tabl 00001000 INTL 20061109)
[ 0.022655] ACPI: TPM2 0x000000007A878C18 000034 (v03
00000000 00000000)
[ 0.022662] ACPI: MSDM 0x000000007A878C50 000055 (v03 DELL WN09
01072009 AMI 00010013)
[ 0.022670] ACPI: LPIT 0x000000007A878CA8 000104 (v01 DELL WN09
00000005 MSFT 0100000D)
[ 0.022678] ACPI: BGRT 0x000000007A878DB0 000038 (v01 DELL WN09
01072009 AMI 00010013)
[ 0.022686] ACPI: CSRT 0x000000007A878DE8 00014C (v00 INTEL
LANFORDC 00000005 MSFT 0100000D)
[ 0.022693] ACPI: SSDT 0x000000007A878F38 000545 (v01 CpuDpf
CpuDptf 00001000 INTL 20061109)
[ 0.022702] ACPI: SSDT 0x000000007A879480 001ED7 (v01 DptfTb
DptfTab 00001000 INTL 20061109)
[ 0.022726] ACPI: Local APIC address 0xfee00000
[ 0.022998] No NUMA configuration found
[ 0.023001] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.023025] NODE_DATA(0) allocated [mem 0x17ffd3000-0x17fffdfff]
[ 0.023868] Zone ranges:
[ 0.023871] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.023875] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.023879] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.023882] Device empty
[ 0.023886] Movable zone start for each node
[ 0.023896] Early memory node ranges
[ 0.023898] node 0: [mem 0x0000000000001000-0x000000000003efff]
[ 0.023901] node 0: [mem 0x0000000000040000-0x000000000009dfff]
[ 0.023903] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.023905] node 0: [mem 0x0000000020200000-0x000000007a7e7fff]
[ 0.023908] node 0: [mem 0x000000007ba3d000-0x000000007bc08fff]
[ 0.023910] node 0: [mem 0x000000007bfc5000-0x000000007bffffff]
[ 0.023912] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.024398] Zeroed struct page in unavailable ranges: 22645 pages
[ 0.024402] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.024407] On node 0 totalpages: 1025931
[ 0.024411] DMA zone: 64 pages used for memmap
[ 0.024412] DMA zone: 21 pages reserved
[ 0.024416] DMA zone: 3996 pages, LIFO batch:0
[ 0.024573] DMA32 zone: 7776 pages used for memmap
[ 0.024575] DMA32 zone: 497647 pages, LIFO batch:63
[ 0.050210] Normal zone: 8192 pages used for memmap
[ 0.050212] Normal zone: 524288 pages, LIFO batch:63
[ 0.069159] Reserving Intel graphics memory at [mem 0x7ce00000-0x7edfffff]
[ 0.069298] ACPI: PM-Timer IO Port: 0x408
[ 0.069302] ACPI: Local APIC address 0xfee00000
[ 0.069321] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.069323] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.069325] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.069327] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.069352] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.069359] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.069363] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.069367] ACPI: IRQ0 used by override.
[ 0.069369] ACPI: IRQ9 used by override.
[ 0.069375] Using ACPI (MADT) for SMP configuration information
[ 0.069379] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.069403] e820: update [mem 0x78ef4000-0x78f21fff] usable ==> reserved
[ 0.069428] TSC deadline timer available
[ 0.069431] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.069503] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.069508] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[ 0.069512] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.069514] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.069518] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.069523] PM: Registered nosave memory: [mem 0x746dd000-0x746ddfff]
[ 0.069528] PM: Registered nosave memory: [mem 0x746ed000-0x746edfff]
[ 0.069532] PM: Registered nosave memory: [mem 0x78ef4000-0x78f21fff]
[ 0.069537] PM: Registered nosave memory: [mem 0x7a7e8000-0x7a869fff]
[ 0.069539] PM: Registered nosave memory: [mem 0x7a86a000-0x7a87bfff]
[ 0.069540] PM: Registered nosave memory: [mem 0x7a87c000-0x7b5acfff]
[ 0.069542] PM: Registered nosave memory: [mem 0x7b5ad000-0x7ba3cfff]
[ 0.069547] PM: Registered nosave memory: [mem 0x7bc09000-0x7bfc4fff]
[ 0.069552] PM: Registered nosave memory: [mem 0x7c000000-0x7cdfffff]
[ 0.069553] PM: Registered nosave memory: [mem 0x7ce00000-0x7edfffff]
[ 0.069555] PM: Registered nosave memory: [mem 0x7ee00000-0xe00f7fff]
[ 0.069557] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.069558] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.069560] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.069562] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[ 0.069563] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.069565] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff]
[ 0.069567] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.069571] [mem 0x7ee00000-0xe00f7fff] available for PCI devices
[ 0.069575] Booting paravirtualized kernel on bare hardware
[ 0.069582] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.069604] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4
nr_cpu_ids:4 nr_node_ids:1
[ 0.070614] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.070636] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.070639] pcpu-alloc: [0] 0 1 2 3
[ 0.070739] Built 1 zonelists, mobility grouping on. Total pages: 1009878
[ 0.070741] Policy zone: Normal
[ 0.070746] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic
root=UUID=bda2f6db-fceb-496e-a089-e310c0f91638 ro quiet splash
vt.handoff=1
[ 0.072283] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[ 0.072976] Inode-cache hash table entries: 262144 (order: 9,
2097152 bytes, linear)
[ 0.073067] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.095205] Calgary: detecting Calgary via BIOS EBDA area
[ 0.095208] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.127921] Memory: 3796588K/4103724K available (14339K kernel
code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 307136K
reserved, 0K cma-reserved)
[ 0.127937] random: get_random_u64 called from
__kmem_cache_create+0x41/0x550 with crng_init=0
[ 0.128406] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.128448] Kernel/User page tables isolation: enabled
[ 0.128487] ftrace: allocating 44229 entries in 173 pages
[ 0.163969] rcu: Hierarchical RCU implementation.
[ 0.163973] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.163975] Tasks RCU enabled.
[ 0.163978] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.163979] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.173975] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.174536] random: crng done (trusting CPU's manufacturer)
[ 0.174589] vt handoff: transparent VT on vt#1
[ 0.174609] Console: colour dummy device 80x25
[ 0.174618] printk: console [tty0] enabled
[ 0.174679] ACPI: Core revision 20190816
[ 0.175002] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.175032] APIC: Switch to symmetric I/O mode setup
[ 0.176806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.195037] clocksource: tsc-early: mask: 0xffffffffffffffff
max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.195046] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.195052] pid_max: default: 32768 minimum: 301
[ 0.204765] LSM: Security Framework initializing
[ 0.204805] Yama: becoming mindful.
[ 0.204891] AppArmor: AppArmor initialized
[ 0.205009] Mount-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.205035] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes, linear)
[ 0.205083] *** VALIDATE tmpfs ***
[ 0.205509] *** VALIDATE proc ***
[ 0.205684] *** VALIDATE cgroup1 ***
[ 0.205688] *** VALIDATE cgroup2 ***
[ 0.205817] process: using mwait in idle threads
[ 0.205825] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.205829] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.205837] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.205840] Spectre V2 : Mitigation: Full generic retpoline
[ 0.205842] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
Filling RSB on context switch
[ 0.205843] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.205847] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.205852] MDS: Mitigation: Clear CPU buffers
[ 0.206202] Freeing SMP alternatives memory: 40K
[ 0.209702] smpboot: CPU0: Intel(R) Pentium(R) CPU N3700 @
1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 0.210218] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont
events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.210232] ... version: 3
[ 0.210234] ... bit width: 40
[ 0.210235] ... generic registers: 2
[ 0.210237] ... value mask: 000000ffffffffff
[ 0.210239] ... max period: 0000007fffffffff
[ 0.210240] ... fixed-purpose events: 3
[ 0.210242] ... event mask: 0000000700000003
[ 0.210359] rcu: Hierarchical SRCU implementation.
[ 0.211040] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.211040] smp: Bringing up secondary CPUs ...
[ 0.211040] x86: Booting SMP configuration:
[ 0.211040] .... node #0, CPUs: #1 #2 #3
[ 0.215623] smp: Brought up 1 node, 4 CPUs
[ 0.215623] smpboot: Max logical packages: 1
[ 0.215623] smpboot: Total of 4 processors activated (12800.00 BogoMIPS)
[ 0.216324] devtmpfs: initialized
[ 0.216324] x86/mm: Memory block size: 128MB
[ 0.219235] PM: Registering ACPI NVS region [mem
0x0003f000-0x0003ffff] (4096 bytes)
[ 0.219235] PM: Registering ACPI NVS region [mem
0x7a87c000-0x7b5acfff] (13832192 bytes)
[ 0.219888] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.219888] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.219888] pinctrl core: initialized pinctrl subsystem
[ 0.219888] PM: RTC time: 13:59:19, date: 2020-10-07
[ 0.220040] NET: Registered protocol family 16
[ 0.220313] audit: initializing netlink subsys (disabled)
[ 0.220369] audit: type=2000 audit(1602079159.044:1):
state=initialized audit_enabled=0 res=1
[ 0.220369] EISA bus registered
[ 0.220369] cpuidle: using governor ladder
[ 0.220369] cpuidle: using governor menu
[ 0.220369] Simple Boot Flag at 0x47 set to 0x1
[ 0.220369] ACPI: bus type PCI registered
[ 0.220369] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.220369] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.220369] PCI: not using MMCONFIG
[ 0.220369] PCI: Using configuration type 1 for base access
[ 0.223238] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.227854] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.231355] ACPI: Added _OSI(Module Device)
[ 0.231355] ACPI: Added _OSI(Processor Device)
[ 0.231355] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.231355] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.231355] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.231355] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.231355] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.265092] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.270876] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.285598] ACPI: Dynamic OEM Table Load:
[ 0.285619] ACPI: SSDT 0xFFFF8E093B3CF000 0005D1 (v01 PmRef
Cpu0Ist 00003000 INTL 20061109)
[ 0.289030] ACPI: Dynamic OEM Table Load:
[ 0.289044] ACPI: SSDT 0xFFFF8E093AB35800 0003A5 (v01 PmRef
Cpu0Cst 00003001 INTL 20061109)
[ 0.292431] ACPI: Dynamic OEM Table Load:
[ 0.292445] ACPI: SSDT 0xFFFF8E093AB27000 00015F (v01 PmRef ApIst
00003000 INTL 20061109)
[ 0.294638] ACPI: Dynamic OEM Table Load:
[ 0.294650] ACPI: SSDT 0xFFFF8E093B3D8480 00008D (v01 PmRef ApCst
00003000 INTL 20061109)
[ 0.301083] ACPI: Interpreter enabled
[ 0.301156] ACPI: (supports S0 S3 S4 S5)
[ 0.301159] ACPI: Using IOAPIC for interrupt routing
[ 0.301305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.305795] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in ACPI motherboard resources
[ 0.305847] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.307227] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.313516] ACPI: Power Resource [USBC] (on)
[ 0.344234] ACPI: Power Resource [FN00] (off)
[ 0.346790] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.346808] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[ 0.348053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug
SHPCHotplug PME AER PCIeCapability LTR]
[ 0.349690] PCI host bridge to bus 0000:00
[ 0.349697] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.349701] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.349706] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.349709] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.349712] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.349716] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff window]
[ 0.349719] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000fffff window]
[ 0.349722] pci_bus 0000:00: root bus resource [mem
0x80000000-0xdfffffff window]
[ 0.349726] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.349754] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.350225] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.350255] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.350269] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff
64bit pref]
[ 0.350280] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.350316] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.350711] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 0.350736] pci 0000:00:0b.0: reg 0x10: [mem 0x9131f000-0x9131ffff 64bit]
[ 0.351235] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.351306] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.351319] pci 0000:00:13.0: reg 0x24: [mem 0x9131c000-0x9131c7ff]
[ 0.351394] pci 0000:00:13.0: PME# supported from D3hot
[ 0.351756] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.351792] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[ 0.351899] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.352328] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.352358] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
[ 0.352371] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
[ 0.352474] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.352832] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.352872] pci 0000:00:1b.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[ 0.352987] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.353342] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.353494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.353929] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.354422] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.354495] pci 0000:00:1f.3: reg 0x10: [mem 0x91318000-0x9131801f]
[ 0.354612] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.355277] pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
[ 0.355321] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x9127ffff 64bit]
[ 0.355376] pci 0000:01:00.0: reg 0x30: [mem 0x91280000-0x9128ffff pref]
[ 0.355497] pci 0000:01:00.0: supports D1 D2
[ 0.355501] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.355777] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.355789] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.464132] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.464434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.464734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.465029] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.465327] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.465624] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.465926] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.466228] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.472883] iommu: Default domain type: Translated
[ 0.475289] SCSI subsystem initialized
[ 0.475327] libata version 3.00 loaded.
[ 0.475327] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.475327] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.475327] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.475327] vgaarb: loaded
[ 0.475327] ACPI: bus type USB registered
[ 0.475327] usbcore: registered new interface driver usbfs
[ 0.475327] usbcore: registered new interface driver hub
[ 0.475327] usbcore: registered new device driver usb
[ 0.498206] pps_core: LinuxPPS API ver. 1 registered
[ 0.498209] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <[email protected]>
[ 0.498218] PTP clock support registered
[ 0.498276] EDAC MC: Ver: 3.0.0
[ 0.499085] Registered efivars operations
[ 0.499223] PCI: Using ACPI for IRQ routing
[ 0.510433] PCI: pci_cache_line_size set to 64 bytes
[ 0.510505] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[ 0.510509] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.510512] e820: reserve RAM buffer [mem 0x746dd018-0x77ffffff]
[ 0.510514] e820: reserve RAM buffer [mem 0x78ef4000-0x7bffffff]
[ 0.510516] e820: reserve RAM buffer [mem 0x7a7e8000-0x7bffffff]
[ 0.510519] e820: reserve RAM buffer [mem 0x7bc09000-0x7bffffff]
[ 0.510821] NetLabel: Initializing
[ 0.510824] NetLabel: domain hash size = 128
[ 0.510825] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.510865] NetLabel: unlabeled traffic allowed by default
[ 0.512638] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.512648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.514727] clocksource: Switched to clocksource tsc-early
[ 0.555638] *** VALIDATE bpf ***
[ 0.555829] VFS: Disk quotas dquot_6.6.0
[ 0.555883] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.555955] *** VALIDATE ramfs ***
[ 0.555972] *** VALIDATE hugetlbfs ***
[ 0.556225] AppArmor: AppArmor Filesystem Enabled
[ 0.556314] pnp: PnP ACPI init
[ 0.556480] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.557097] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.557102] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.557106] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.557122] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557254] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.557416] pnp 00:03: Plug and Play ACPI device, IDs SYN060c
PNP0f13 (active)
[ 0.557565] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.557579] system 00:04: [mem 0xfe900000-0xfe902fff] has been reserved
[ 0.557591] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.560640] system 00:05: [mem 0x9131d000-0x9131dfff] has been reserved
[ 0.560646] system 00:05: [mem 0x9131b000-0x9131bfff] has been reserved
[ 0.560650] system 00:05: [mem 0x91319000-0x91319fff] has been reserved
[ 0.560663] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.560805] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.560809] system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.560815] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.560819] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.560822] system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.560827] system 00:06: [mem 0xfed08000-0xfed09fff] could not be reserved
[ 0.560831] system 00:06: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 0.560834] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.560838] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.560852] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.571568] pnp: PnP ACPI: found 7 devices
[ 0.577431] thermal_sys: Registered thermal governor 'fair_share'
[ 0.577434] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.577436] thermal_sys: Registered thermal governor 'step_wise'
[ 0.577438] thermal_sys: Registered thermal governor 'user_space'
[ 0.577440] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.582036] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.582158] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.582172] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.582185] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.582190] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.582193] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.582197] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.582200] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.582203] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.582207] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.582210] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 0.582215] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[ 0.582566] NET: Registered protocol family 2
[ 0.583079] tcp_listen_portaddr_hash hash table entries: 2048
(order: 3, 32768 bytes, linear)
[ 0.583183] TCP established hash table entries: 32768 (order: 6,
262144 bytes, linear)
[ 0.583455] TCP bind hash table entries: 32768 (order: 7, 524288
bytes, linear)
[ 0.583645] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.583784] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.583847] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.584007] NET: Registered protocol family 1
[ 0.584021] NET: Registered protocol family 44
[ 0.584055] pci 0000:00:02.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[ 0.584712] PCI: CLS 0 bytes, default 64
[ 0.584848] Trying to unpack rootfs image as initramfs...
[ 1.839369] Freeing initrd memory: 39872K
[ 1.839429] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.839433] software IO TLB: mapped [mem 0x706dc000-0x746dc000] (64MB)
[ 1.839556] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x171024fa93b, max_idle_ns: 440795253189 ns
[ 1.839605] clocksource: Switched to clocksource tsc
[ 1.839707] check: Scanning for low memory corruption every 60 seconds
[ 1.840904] Initialise system trusted keyrings
[ 1.840930] Key type blacklist registered
[ 1.841026] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.845301] zbud: loaded
[ 1.846430] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.846972] fuse: init (API version 7.31)
[ 1.847027] *** VALIDATE fuse ***
[ 1.847031] *** VALIDATE fuse ***
[ 1.847360] Platform Keyring initialized
[ 1.854468] Key type asymmetric registered
[ 1.854471] Asymmetric key parser 'x509' registered
[ 1.854493] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 244)
[ 1.854627] io scheduler mq-deadline registered
[ 1.855541] pcieport 0000:00:1c.0: PME: Signaling with IRQ 115
[ 1.855716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.855891] efifb: probing for efifb
[ 1.855935] efifb: showing boot graphics
[ 1.858327] efifb: framebuffer at 0x80000000, using 4128k, total 4128k
[ 1.858330] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.858331] efifb: scrolling: redraw
[ 1.858334] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.858509] fbcon: Deferring console take-over
[ 1.858512] fb0: EFI VGA frame buffer device
[ 1.858534] intel_idle: MWAIT substates: 0x33000020
[ 1.858536] intel_idle: v0.4.1 model 0x4C
[ 1.859023] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.859470] ACPI: AC Adapter [AC] (off-line)
[ 1.859646] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.859746] ACPI: Lid Switch [LID0]
[ 1.859835] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.859887] ACPI: Power Button [PWRB]
[ 1.859983] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.860033] ACPI: Sleep Button [SLPB]
[ 1.860130] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.860215] ACPI: Power Button [PWRF]
[ 1.897797] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.897801] ACPI: Thermal Zone [THM] (65 C)
[ 1.899527] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.899530] ACPI: Thermal Zone [TZ01] (65 C)
[ 1.900191] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.920841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
115200) is a 16550A
[ 1.929881] Linux agpgart interface v0.103
[ 1.941705] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.994405] loop: module loaded
[ 1.995155] libphy: Fixed MDIO Bus: probed
[ 1.995158] tun: Universal TUN/TAP device driver, 1.6
[ 1.995322] PPP generic driver version 2.4.2
[ 1.995600] VFIO - User Level meta-driver version: 0.3
[ 1.996036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.996051] ehci-pci: EHCI PCI platform driver
[ 1.996085] ehci-platform: EHCI generic platform driver
[ 1.996116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.996125] ohci-pci: OHCI PCI platform driver
[ 1.996146] ohci-platform: OHCI generic platform driver
[ 1.996165] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.996651] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.996668] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 1.997819] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci
version 0x100 quirks 0x0000000081509810
[ 1.997948] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.998372] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 1.998378] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.998381] usb usb1: Product: xHCI Host Controller
[ 1.998385] usb usb1: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 1.998388] usb usb1: SerialNumber: 0000:00:14.0
[ 1.998823] hub 1-0:1.0: USB hub found
[ 1.998858] hub 1-0:1.0: 7 ports detected
[ 2.003823] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.003833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 2.003841] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.003973] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.04
[ 2.003978] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.003981] usb usb2: Product: xHCI Host Controller
[ 2.003985] usb usb2: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[ 2.003988] usb usb2: SerialNumber: 0000:00:14.0
[ 2.004426] hub 2-0:1.0: USB hub found
[ 2.004458] hub 2-0:1.0: 6 ports detected
[ 2.009167] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 2.013110] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.013124] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.013854] mousedev: PS/2 mouse device common for all mice
[ 2.014968] rtc_cmos 00:00: RTC can wake from S4
[ 2.015602] rtc_cmos 00:00: registered as rtc0
[ 2.015687] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes
nvram, hpet irqs
[ 2.015709] i2c /dev entries driver
[ 2.016120] device-mapper: uevent: version 1.0.3
[ 2.016638] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16)
initialised: [email protected]
[ 2.016705] platform eisa.0: Probing EISA bus 0
[ 2.016710] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.016713] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.016716] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.016719] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.016722] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.016725] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.016728] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.016731] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.016734] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.016738] platform eisa.0: EISA: Detected 0 cards
[ 2.016747] intel_pstate: Intel P-state driver initializing
[ 2.017773] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.017816] EFI Variables Facility v0.08 2004-May-17
[ 2.030165] drop_monitor: Initializing network drop monitor service
[ 2.030510] NET: Registered protocol family 10
[ 2.038315] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 2.046024] Segment Routing with IPv6
[ 2.046091] NET: Registered protocol family 17
[ 2.046553] Key type dns_resolver registered
[ 2.048468] RAS: Correctable Errors collector initialized.
[ 2.048572] microcode: sig=0x406c3, pf=0x1, revision=0x368
[ 2.049575] microcode: Microcode Update Driver: v2.2.
[ 2.049592] IPI shorthand broadcast: enabled
[ 2.049620] sched_clock: Marking stable (2048890362,
657575)->(2079145287, -29597350)
[ 2.050067] registered taskstats version 1
[ 2.050089] Loading compiled-in X.509 certificates
[ 2.052215] Loaded X.509 cert 'Build time autogenerated kernel key:
59a6f4fdc5599d4ba313e816491c745e50e7fa8e'
[ 2.052291] zswap: loaded using pool lzo/zbud
[ 2.053099] Key type ._fscrypt registered
[ 2.053101] Key type .fscrypt registered
[ 2.069587] Key type big_key registered
[ 2.069604] Key type trusted registered
[ 2.077007] Key type encrypted registered
[ 2.077022] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.078005] integrity: Loading X.509 certificate: UEFI:db
[ 2.078105] integrity: Loaded X.509 cert 'Microsoft Windows
Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 2.078107] integrity: Loading X.509 certificate: UEFI:db
[ 2.078155] integrity: Loaded X.509 cert 'Microsoft Corporation
UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 2.079286] ima: Allocated hash algorithm: sha1
[ 2.165945] ima: No architecture policies found
[ 2.166002] evm: Initialising EVM extended attributes:
[ 2.166005] evm: security.selinux
[ 2.166007] evm: security.SMACK64
[ 2.166008] evm: security.SMACK64EXEC
[ 2.166009] evm: security.SMACK64TRANSMUTE
[ 2.166010] evm: security.SMACK64MMAP
[ 2.166011] evm: security.apparmor
[ 2.166012] evm: security.ima
[ 2.166015] evm: security.capability
[ 2.166017] evm: HMAC attrs: 0x1
[ 2.167258] PM: Magic number: 8:371:988
[ 2.167268] machinecheck machinecheck1: hash matches
[ 2.167802] rtc_cmos 00:00: setting system clock to
2020-10-07T13:59:21 UTC (1602079161)
[ 2.168206] Lockdown: swapper/0: hibernation is restricted; see man
kernel_lockdown.7
[ 2.179885] Freeing unused decrypted memory: 2040K
[ 2.181594] Freeing unused kernel image memory: 2704K
[ 2.181930] Write protecting the kernel read-only data: 22528k
[ 2.184005] Freeing unused kernel image memory: 2008K
[ 2.185282] Freeing unused kernel image memory: 1216K
[ 2.210218] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.210637] x86/mm: Checking user space page tables
[ 2.234959] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.234965] Run /init as init process
[ 2.339096] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.488416] usb 1-2: New USB device found, idVendor=05e3,
idProduct=0608, bcdDevice=88.31
[ 2.488420] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.488422] usb 1-2: Product: USB2.0 Hub
[ 2.489265] hub 1-2:1.0: USB hub found
[ 2.489571] hub 1-2:1.0: 4 ports detected
[ 2.490505] usb: port power management may be unreliable
[ 2.496125] sdhci: Secure Digital Host Controller Interface driver
[ 2.496129] sdhci: Copyright(c) Pierre Ossman
[ 2.497113] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.520239] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 2.552542] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query
control method not found
[ 2.555797] ahci 0000:00:13.0: version 3.0
[ 2.566299] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6
Gbps 0x3 impl SATA mode
[ 2.566304] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo
only pio slum part deso sadm sds apst
[ 2.567102] scsi host0: ahci
[ 2.569597] scsi host1: ahci
[ 2.569759] ata1: SATA max UDMA/133 abar m2048@0x9131c000 port
0x9131c100 irq 117
[ 2.569763] ata2: SATA max UDMA/133 abar m2048@0x9131c000 port
0x9131c180 irq 117
[ 2.619084] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 2.619571] i2c_hid i2c-DLL06AC:00: i2c-DLL06AC:00 supply vdd not
found, using dummy regulator
[ 2.619603] i2c_hid i2c-DLL06AC:00: i2c-DLL06AC:00 supply vddl not
found, using dummy regulator
[ 2.661644] input: DLL06AC:00 06CB:78F1 Mouse as
/devices/pci0000:00/808622C1:00/i2c-0/i2c-DLL06AC:00/0018:06CB:78F1.0001/input/input8
[ 2.662617] hid-generic 0018:06CB:78F1.0001: input,hidraw0: I2C HID
v1.00 Mouse [DLL06AC:00 06CB:78F1] on i2c-DLL06AC:00
[ 2.666814] mc: Linux media interface: v0.10
[ 2.676237] videodev: Linux video capture interface: v2.00
[ 2.790159] usb 1-5: New USB device found, idVendor=0bda,
idProduct=5683, bcdDevice=42.73
[ 2.790164] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.790167] usb 1-5: Product: Integrated_Webcam_HD
[ 2.790170] usb 1-5: Manufacturer: CNFEH45M135030005502
[ 2.790175] usb 1-5: SerialNumber: 200901010001
[ 2.821288] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer:
Synaptics, product: TM3096-001, fw id: 2019836
[ 2.855306] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[ 2.883104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.884448] ata1.00: ATA-10: WDC WD5000LPCX-75VHAT0, 01.01A01, max UDMA/133
[ 2.884453] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.885726] ata1.00: configured for UDMA/133
[ 2.886231] scsi 0:0:0:0: Direct-Access ATA WDC
WD5000LPCX-7 1A01 PQ: 0 ANSI: 5
[ 2.886728] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.886861] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks:
(500 GB/466 GiB)
[ 2.886864] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.886898] sd 0:0:0:0: [sda] Write Protect is off
[ 2.886901] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.886965] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.889801] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.893554] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, DD11, max UDMA/133
[ 2.904466] ata2.00: configured for UDMA/133
[ 2.919706] input: Synaptics TM3096-001 as
/devices/pci0000:00/808622C1:00/i2c-0/i2c-DLL06AC:00/0018:06CB:78F1.0001/input/input10
[ 2.920910] hid-rmi 0018:06CB:78F1.0001: input,hidraw0: I2C HID
v1.00 Mouse [DLL06AC:00 06CB:78F1] on i2c-DLL06AC:00
[ 2.927589] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW
DU-8A5LH DD11 PQ: 0 ANSI: 5
[ 2.956990] usb 1-2.1: New USB device found, idVendor=0cf3,
idProduct=e005, bcdDevice= 0.01
[ 2.956996] usb 1-2.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.999092] sda: sda1 sda2
[ 3.001092] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 3.001097] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.001357] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.024280] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.024470] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.051492] usb 1-2.2: new high-speed USB device number 5 using xhci_hcd
[ 3.153094] usb 1-2.2: New USB device found, idVendor=0bda,
idProduct=0129, bcdDevice=39.60
[ 3.153100] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.153104] usb 1-2.2: Product: USB2.0-CRW
[ 3.153107] usb 1-2.2: Manufacturer: Generic
[ 3.153109] usb 1-2.2: SerialNumber: 20100201396000000
[ 3.170960] usbcore: registered new interface driver rtsx_usb
[ 3.448525] fbcon: Taking over console
[ 3.448764] Console: switching to colour frame buffer device 170x48
[ 3.537925] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 5.901674] systemd[1]: systemd 237 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2
+IDN -PCRE2 default-hierarchy=hybrid)
[ 5.920203] systemd[1]: Detected architecture x86-64.
[ 5.971923] systemd[1]: Set hostname to <dell-cristian>.
[ 6.030645] Lockdown: systemd: /dev/mem,kmem,port is restricted;
see man kernel_lockdown.7
[ 7.050270] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
[ 7.171703] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 8.204729] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input7
[ 8.267433] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 10.201711] systemd[1]: Created slice User and Session Slice.
[ 10.202376] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 10.202427] systemd[1]: Reached target Remote File Systems.
[ 10.202461] systemd[1]: Reached target User and Group Name Lookups.
[ 10.202933] systemd[1]: Created slice System Slice.
[ 10.203346] systemd[1]: Listening on Journal Audit Socket.
[ 10.203633] systemd[1]: Listening on Journal Socket.
[ 10.507882] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.948591] systemd-journald[275]: Received request to flush
runtime journal from PID 1
[ 11.065920] lp: driver loaded but no devices found
[ 11.073891] ppdev: user-space parallel port driver
[ 11.143249] Adding 2097148k swap on /swapfile. Priority:-2
extents:6 across:2260988k FS
[ 18.646965] ACPI Warning: \_SB.DPTF._ART: Return Package has no
elements (empty) (20190816/nsprepkg-96)
[ 18.659492] input: DELL Wireless hotkeys as /devices/virtual/input/input11
[ 18.668458] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
[ 18.680343] proc_thermal 0000:00:0b.0: Creating sysfs group for
PROC_THERMAL_PCI
[ 19.333922] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.3)
[ 19.373755] checking generic (80000000 408000) vs hw (80000000 10000000)
[ 19.373758] fb0: switching to inteldrmfb from EFI VGA
[ 19.373959] Console: switching to colour dummy device 80x25
[ 19.374027] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 19.374166] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.374167] [drm] Driver supports precise vblank timestamp query.
[ 19.376128] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.383606] input: Dell WMI hotkeys as
/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
[ 19.390029] i915 0000:00:02.0:
[drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD
backlight support, but VBT disagrees. If your backlight controls don't
work try booting with i915.enable_dpcd_backlight=1. If your machine
needs this, please file a _new_ bug report on bugs.freedesktop.org
against DRI -> DRM/Intel
[ 19.403880] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 19.406380] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.407014] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 19.613896] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 19.619727] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 19.683339] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 19.683563] fbcon: i915drmfb (fb0) is primary device
[ 19.683733] Console: switching to colour frame buffer device 170x48
[ 19.683772] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 20.870341] cryptd: max_cpu_qlen set to 1000
[ 20.973691] SSE version of gcm_enc/dec engaged.
[ 21.243877] snd_hda_codec_generic hdaudioC0D0: autoconfig for
Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.243881] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 21.243884] snd_hda_codec_generic hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 21.243886] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 21.243887] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 21.243890] snd_hda_codec_generic hdaudioC0D0: Mic=0x12
[ 21.267719] snd_hda_codec_generic hdaudioC0D2: autoconfig for
Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 21.267724] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 21.267726] snd_hda_codec_generic hdaudioC0D2: hp_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 21.267728] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0
[ 21.267730] snd_hda_codec_generic hdaudioC0D2: dig-out=0x5/0x0
[ 21.267731] snd_hda_codec_generic hdaudioC0D2: inputs:
[ 21.273861] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 21.274144] input: HDA Intel PCH HDMI as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 21.278002] Bluetooth: Core ver 2.22
[ 21.278044] NET: Registered protocol family 31
[ 21.278046] Bluetooth: HCI device and connection manager initialized
[ 21.278053] Bluetooth: HCI socket layer initialized
[ 21.278061] Bluetooth: L2CAP socket layer initialized
[ 21.278069] Bluetooth: SCO socket layer initialized
[ 21.501857] usbcore: registered new interface driver btusb
[ 21.839511] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[ 21.839792] ath: phy0: WB335 2-ANT card detected
[ 21.839794] ath: phy0: Set BT/WLAN RX diversity capability
[ 21.848409] ath: phy0: Enable LNA combining
[ 21.848455] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5683)
[ 21.849596] ath: phy0: ASPM enabled: 0x42
[ 21.849600] ath: EEPROM regdomain: 0x6c
[ 21.849601] ath: EEPROM indicates we should expect a direct regpair map
[ 21.849603] ath: Country alpha2 being used: 00
[ 21.849604] ath: Regpair used: 0x6c
[ 21.851595] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.852587] ieee80211 phy0: Atheros AR9565 Rev:1
mem=0xffffa45901100000, irq=16
[ 21.855355] uvcvideo 1-5:1.0: Entity type for entity Extension 4
was not initialized!
[ 21.855360] uvcvideo 1-5:1.0: Entity type for entity Extension 7
was not initialized!
[ 21.855362] uvcvideo 1-5:1.0: Entity type for entity Processing 2
was not initialized!
[ 21.855364] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was
not initialized!
[ 21.855492] input: Integrated_Webcam_HD: Integrate as
/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input16
[ 21.855638] usbcore: registered new interface driver uvcvideo
[ 21.855640] USB Video Class driver (1.1.1)
[ 22.049541] usbcore: registered new interface driver ath3k
[ 22.179810] usb 1-2.1: USB disconnect, device number 4
[ 22.403091] usb 1-2.1: new full-speed USB device number 6 using xhci_hcd
[ 22.504282] usb 1-2.1: New USB device found, idVendor=0cf3,
idProduct=e005, bcdDevice= 0.02
[ 22.504286] usb 1-2.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 26.193412] intel_rapl_common: Found RAPL domain package
[ 26.193416] intel_rapl_common: Found RAPL domain core
[ 26.562616] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 37.842997] audit: type=1400 audit(1602079197.168:2):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/bin/man" pid=845 comm="apparmor_parser"
[ 37.843006] audit: type=1400 audit(1602079197.168:3):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_filter" pid=845 comm="apparmor_parser"
[ 37.843010] audit: type=1400 audit(1602079197.168:4):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="man_groff" pid=845 comm="apparmor_parser"
[ 37.845576] audit: type=1400 audit(1602079197.172:5):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/sbin/dhclient" pid=842 comm="apparmor_parser"
[ 37.845585] audit: type=1400 audit(1602079197.172:6):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842
comm="apparmor_parser"
[ 37.845590] audit: type=1400 audit(1602079197.172:7):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=842
comm="apparmor_parser"
[ 37.845593] audit: type=1400 audit(1602079197.172:8):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=842
comm="apparmor_parser"
[ 37.847921] audit: type=1400 audit(1602079197.176:9):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="libreoffice-oopslash" pid=846 comm="apparmor_parser"
[ 37.850383] audit: type=1400 audit(1602079197.176:10):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="libreoffice-senddoc" pid=847 comm="apparmor_parser"
[ 37.851133] audit: type=1400 audit(1602079197.180:11):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="libreoffice-xpdfimport" pid=849 comm="apparmor_parser"
[ 38.480466] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.480469] Bluetooth: BNEP filters: protocol multicast
[ 38.480478] Bluetooth: BNEP socket layer initialized
[ 40.520940] Lockdown: udisksd: /dev/mem,kmem,port is restricted;
see man kernel_lockdown.7
[ 44.347644] wlp1s0: authenticate with 40:0d:10:2c:41:19
[ 44.360246] wlp1s0: send auth to 40:0d:10:2c:41:19 (try 1/3)
[ 44.363272] wlp1s0: authenticated
[ 44.367221] wlp1s0: associate with 40:0d:10:2c:41:19 (try 1/3)
[ 44.374733] wlp1s0: RX AssocResp from 40:0d:10:2c:41:19
(capab=0x431 status=0 aid=2)
[ 44.374922] wlp1s0: associated
[ 44.375189] ath: EEPROM regdomain: 0x8098
[ 44.375194] ath: EEPROM indicates we should expect a country code
[ 44.375196] ath: doing EEPROM country->regdmn map search
[ 44.375199] ath: country maps to regdmn code: 0x5b
[ 44.375201] ath: Country alpha2 being used: CL
[ 44.375203] ath: Regpair used: 0x5b
[ 44.375207] ath: regdomain 0x8098 dynamically updated by country element
[ 44.445281] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 58.972104] Lockdown: systemd-logind: hibernation is restricted;
see man kernel_lockdown.7
[ 76.710332] Bluetooth: RFCOMM TTY layer initialized
[ 76.710343] Bluetooth: RFCOMM socket layer initialized
[ 76.710361] Bluetooth: RFCOMM ver 1.11
[ 79.136140] Lockdown: systemd-logind: hibernation is restricted;
see man kernel_lockdown.7
[ 80.746587] rfkill: input handler disabled
===
On Tue, Oct 6, 2020 at 11:51 PM Larry Finger <[email protected]> wrote:
>
> On 10/6/20 7:31 PM, Cristian Llanos wrote:
> > Actually, the first command outputs nothing..
> >
> That means that it has not created a wireless interface.
>
> Does the output of the dmesg command show any information?
>
> Larry
>
--
Cristian Llanos Montenegro
+56 9 9618 8576
On 10/7/20 9:14 AM, Cristian Llanos wrote:
> [ 21.839511] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
> [ 21.839792] ath: phy0: WB335 2-ANT card detected
> [ 21.839794] ath: phy0: Set BT/WLAN RX diversity capability
> [ 21.848409] ath: phy0: Enable LNA combining
That dmesg does not show any Realtek hardware. The wifi is Atheros using driver
ath9k!
Please post the output of 'lspci -nn'.
Larry