Hi,
When using the latest wireless-drivers-next, facing the below crash
often even after module re-insertion or reboot. I have also installed
the latest linux-firmware.git.
[ +3.746016] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ +0.271699] ath10k_pci 0000:03:00.0: qca6174 hw3.2 target 0x05030000
chip_id 0x00340aff sub 1028:0310
[ +0.000005] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 1
[ +0.001449] ath10k_pci 0000:03:00.0: firmware ver
RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features
wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
[ +0.064756] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A
crc32 20d869c3
[ +0.068893] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[ +0.019223] ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3
cal otp max-sta 32 raw 0 hwcrypto 1
[ +0.080089] ath: EEPROM regdomain: 0x6c
[ +0.000003] ath: EEPROM indicates we should expect a direct regpair map
[ +0.000003] ath: Country alpha2 being used: 00
[ +0.000002] ath: Regpair used: 0x6c
[ +0.011095] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan2
[ +0.238960] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[ +3.176573] wlp3s0: authenticate with 08:02:8e:8c:9c:40
[ +0.056253] wlp3s0: send auth to 08:02:8e:8c:9c:40 (try 1/3)
[ +0.012854] wlp3s0: authenticated
[ +0.004642] wlp3s0: associate with 08:02:8e:8c:9c:40 (try 1/3)
[ +0.004570] wlp3s0: RX AssocResp from 08:02:8e:8c:9c:40 (capab=0x411
status=0 aid=2)
[ +0.003451] ath10k_pci 0000:03:00.0: firmware crashed! (guid
95eb5eb1-3589-419e-b7b9-7d556debc646)
[ +0.000022] ath10k_pci 0000:03:00.0: qca6174 hw3.2 target 0x05030000
chip_id 0x00340aff sub 1028:0310
[ +0.000007] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 1
[ +0.001647] ath10k_pci 0000:03:00.0: firmware ver
RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features
wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
[ +0.001230] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A
crc32 20d869c3
[ +0.000005] ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3
cal otp max-sta 32 raw 0 hwcrypto 1
[ +0.000133] ath10k_pci 0000:03:00.0: firmware register dump:
[ +0.000007] ath10k_pci 0000:03:00.0: [00]: 0x05030000 0x00000000
0x8098F1D2 0x0000004C
[ +0.000005] ath10k_pci 0000:03:00.0: [04]: 0x8098F1D2 0x0040E828
0x00455014 0x00000000
[ +0.000004] ath10k_pci 0000:03:00.0: [08]: 0x00000001 0x00000000
0x00000000 0x004126C8
[ +0.000005] ath10k_pci 0000:03:00.0: [12]: 0xDEADC0DE 0x0040E808
0x00000000 0x00000001
[ +0.000004] ath10k_pci 0000:03:00.0: [16]: 0x009EDE58 0x00000020
0x0040A054 0x0000000D
[ +0.000004] ath10k_pci 0000:03:00.0: [20]: 0x00412064 0x0040E7E8
0x00001058 0x00000000
[ +0.000005] ath10k_pci 0000:03:00.0: [24]: 0x00931000 0x00000020
0x00000001 0x00000010
[ +0.000004] ath10k_pci 0000:03:00.0: [28]: 0x80990B2E 0x0040E848
0x0044D078 0x0044E2D0
[ +0.000004] ath10k_pci 0000:03:00.0: [32]: 0x0044E306 0x00421508
0x00400000 0x00498540
[ +0.000004] ath10k_pci 0000:03:00.0: [36]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000004] ath10k_pci 0000:03:00.0: [40]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000003] ath10k_pci 0000:03:00.0: [44]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000004] ath10k_pci 0000:03:00.0: [48]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000004] ath10k_pci 0000:03:00.0: [52]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000004] ath10k_pci 0000:03:00.0: [56]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000004] ath10k_pci 0000:03:00.0: Copy Engine register dump:
[ +0.000013] ath10k_pci 0000:03:00.0: [00]: 0x00034400 11 11 3 3
[ +0.000012] ath10k_pci 0000:03:00.0: [01]: 0x00034800 30 30 107 108
[ +0.000012] ath10k_pci 0000:03:00.0: [02]: 0x00034c00 7 7 70 71
[ +0.000012] ath10k_pci 0000:03:00.0: [03]: 0x00035000 30 30 31 30
[ +0.000012] ath10k_pci 0000:03:00.0: [04]: 0x00035400 7 7 69 5
[ +0.000012] ath10k_pci 0000:03:00.0: [05]: 0x00035800 0 0 64 0
[ +0.000011] ath10k_pci 0000:03:00.0: [06]: 0x00035c00 3 3 3 3
[ +0.000012] ath10k_pci 0000:03:00.0: [07]: 0x00036000 1 1 1 1
[ +0.036834] ath10k_pci 0000:03:00.0: failed to poke peer
08:02:8e:8c:9c:40 param for ps workaround on vdev 0: -108
[ +0.050110] ath10k_pci 0000:03:00.0: device has crashed during init
[ +0.027913] ath10k_pci 0000:03:00.0: device has crashed during init
[ +0.000005] ath10k_pci 0000:03:00.0: failed to wait for target init: -70
[ +0.002371] ieee80211 phy3: Hardware restart was requested
[ +0.000046] wlp3s0: associated
[ +0.000210] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ +0.204620] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[ +0.122987] ath10k_pci 0000:03:00.0: firmware crashed! (guid
0c0784c4-2b86-4453-a54f-52a51c9b70d6)
[ +0.000016] ath10k_pci 0000:03:00.0: qca6174 hw3.2 target 0x05030000
chip_id 0x00340aff sub 1028:0310
[ +0.000005] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 1
[ +0.001884] ath10k_pci 0000:03:00.0: firmware ver
RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features
wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
[ +0.001431] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A
crc32 20d869c3
[ +0.000008] ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3
cal otp max-sta 32 raw 0 hwcrypto 1
[ +0.000247] ath10k_pci 0000:03:00.0: firmware register dump:
[ +0.000011] ath10k_pci 0000:03:00.0: [00]: 0x05030000 0x00000000
0x8098F1D2 0x0000004C
[ +0.000024] ath10k_pci 0000:03:00.0: [04]: 0x8098F1D2 0x0040E828
0x00455014 0x00000000
[ +0.000021] ath10k_pci 0000:03:00.0: [08]: 0x00000001 0x00000000
0x00000000 0x004126C8
[ +0.000017] ath10k_pci 0000:03:00.0: [12]: 0xDEADC0DE 0x0040E808
0x00000000 0x00000001
[ +0.000012] ath10k_pci 0000:03:00.0: [16]: 0x009EDE58 0x00000020
0x0040A054 0x0000000D
[ +0.000008] ath10k_pci 0000:03:00.0: [20]: 0x00412064 0x0040E7E8
0x00001058 0x00000000
[ +0.000007] ath10k_pci 0000:03:00.0: [24]: 0x00931000 0x00000020
0x00000001 0x00000010
[ +0.000008] ath10k_pci 0000:03:00.0: [28]: 0x80990B2E 0x0040E848
0x0044D078 0x0044E2D0
[ +0.000008] ath10k_pci 0000:03:00.0: [32]: 0x0044E306 0x00421508
0x00400000 0x00498540
[ +0.000008] ath10k_pci 0000:03:00.0: [36]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000008] ath10k_pci 0000:03:00.0: [40]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000012] ath10k_pci 0000:03:00.0: [44]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000008] ath10k_pci 0000:03:00.0: [48]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000006] ath10k_pci 0000:03:00.0: [52]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000008] ath10k_pci 0000:03:00.0: [56]: 0x00000000 0x00000000
0x00000000 0x00000000
[ +0.000007] ath10k_pci 0000:03:00.0: Copy Engine register dump:
[ +0.000018] ath10k_pci 0000:03:00.0: [00]: 0x00034400 11 11 3 3
[ +0.000019] ath10k_pci 0000:03:00.0: [01]: 0x00034800 28 28 73 74
[ +0.000028] ath10k_pci 0000:03:00.0: [02]: 0x00034c00 6 6 5 6
[ +0.000028] ath10k_pci 0000:03:00.0: [03]: 0x00035000 14 14 14 14
[ +0.000016] ath10k_pci 0000:03:00.0: [04]: 0x00035400 3 3 67 3
[ +0.000016] ath10k_pci 0000:03:00.0: [05]: 0x00035800 0 0 64 0
[ +0.000017] ath10k_pci 0000:03:00.0: [06]: 0x00035c00 3 3 3 3
[ +0.000016] ath10k_pci 0000:03:00.0: [07]: 0x00036000 1 1 1 1
[ +0.000190] ath10k_pci 0000:03:00.0: failed to set 2g txpower 20: -108
[ +0.000007] ath10k_pci 0000:03:00.0: failed to setup tx power 20: -108
[ +0.000006] ath10k_pci 0000:03:00.0: failed to recalc tx power: -108
[ +0.014655] ath: EEPROM regdomain: 0x8164
[ +0.000004] ath: EEPROM indicates we should expect a country code
[ +0.000003] ath: doing EEPROM country->regdmn map search
[ +0.000002] ath: country maps to regdmn code: 0x5b
[ +0.000003] ath: Country alpha2 being used: IN
[ +0.000002] ath: Regpair used: 0x5b
[ +0.000004] ath: regdomain 0x8164 dynamically updated by country element
[ +9.986625] wlp3s0: deauthenticating from 08:02:8e:8c:9c:40 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ +0.000244] ath10k_warn: 11 callbacks suppressed
[ +0.000008] ath10k_pci 0000:03:00.0: failed to delete peer
08:02:8e:8c:9c:40 for vdev 0: -108
[ +0.000223] ath10k_pci 0000:03:00.0: failed to recalculate rts/cts
prot for vdev 0: -108
[ +0.000008] ath10k_pci 0000:03:00.0: failed to set cts protection
for vdev 0: -108
[ +0.000008] ath10k_pci 0000:03:00.0: failed to set erp slot for vdev 0: -108
[ +0.000006] ath10k_pci 0000:03:00.0: failed to set preamble for vdev 0: -108
[ +0.000007] ath10k_pci 0000:03:00.0: failed to down vdev 0: -108
[ +0.000007] ath10k_pci 0000:03:00.0: failed to submit vdev param
txbf 0x0: -108
[ +0.000005] ath10k_pci 0000:03:00.0: failed to recalc txbf for vdev 0: -108
[ +0.000011] ath10k_pci 0000:03:00.0: failed to set vdev wmm params
on vdev 0: -108
[ +0.000005] ath10k_pci 0000:03:00.0: failed to set vdev wmm params
on vdev 0: -108
[ +5.103322] ath10k_warn: 9 callbacks suppressed
[ +0.000009] ath10k_pci 0000:03:00.0: failed to start hw scan: -108
--
Thanks,
Regards,
Chaitanya T K.