After reboot with kernel & firmware updates I found `failed to copy
target iram contents:` in dmesg and missing wlan interfaces for both
of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
it, so while I have no idea what's actually happening, I don't see why
we should fail in this case, looks like some optional firmware ability
that could be skipped.
Also with additional logging there is
```
[ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
[ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
[ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
```
so exact branch could be seen.
Signed-off-by: Slava Kardakov <[email protected]>
---
Of course I forgot to sing off, since I don't use it by default because I
hate my real name and kernel requires it
drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2f9be182fbfb..d9fd5294e142 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
u32 len, remaining_len;
hw_mem = ath10k_coredump_get_mem_layout(ar);
- if (!hw_mem)
+ if (!hw_mem) {
+ ath10k_warn(ar, "No hardware memory");
return -ENOMEM;
+ }
for (i = 0; i < hw_mem->region_table.size; i++) {
tmp = &hw_mem->region_table.regions[i];
@@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
}
}
- if (!mem_region)
+ if (!mem_region) {
+ ath10k_warn(ar, "No memory region");
return -ENOMEM;
+ }
for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
if (ar->wmi.mem_chunks[i].req_id ==
@@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (status) {
ath10k_warn(ar, "failed to copy target iram contents: %d",
status);
- goto err_hif_stop;
}
}
--
2.32.0
See also: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
>
> After reboot with kernel & firmware updates I found `failed to copy
> target iram contents:` in dmesg and missing wlan interfaces for both
> of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> it, so while I have no idea what's actually happening, I don't see why
> we should fail in this case, looks like some optional firmware ability
> that could be skipped.
>
> Also with additional logging there is
> ```
> [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> ```
> so exact branch could be seen.
>
> Signed-off-by: Slava Kardakov <[email protected]>
> ---
> Of course I forgot to sing off, since I don't use it by default because I
> hate my real name and kernel requires it
>
> drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> index 2f9be182fbfb..d9fd5294e142 100644
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> u32 len, remaining_len;
>
> hw_mem = ath10k_coredump_get_mem_layout(ar);
> - if (!hw_mem)
> + if (!hw_mem) {
> + ath10k_warn(ar, "No hardware memory");
> return -ENOMEM;
> + }
>
> for (i = 0; i < hw_mem->region_table.size; i++) {
> tmp = &hw_mem->region_table.regions[i];
> @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> }
> }
>
> - if (!mem_region)
> + if (!mem_region) {
> + ath10k_warn(ar, "No memory region");
> return -ENOMEM;
> + }
>
> for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> if (ar->wmi.mem_chunks[i].req_id ==
> @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> if (status) {
> ath10k_warn(ar, "failed to copy target iram contents: %d",
> status);
> - goto err_hif_stop;
> }
> }
>
> --
> 2.32.0
On Thu, Jul 22, 2021 at 12:42 PM ojab // <[email protected]> wrote:
>
> See also: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
>
> On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
> >
> > After reboot with kernel & firmware updates I found `failed to copy
> > target iram contents:` in dmesg and missing wlan interfaces for both
> > of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> > it, so while I have no idea what's actually happening, I don't see why
> > we should fail in this case, looks like some optional firmware ability
> > that could be skipped.
> >
> > Also with additional logging there is
> > ```
> > [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> > [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> > [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> > [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> > ```
> > so exact branch could be seen.
> >
> > Signed-off-by: Slava Kardakov <[email protected]>
> > ---
> > Of course I forgot to sing off, since I don't use it by default because I
> > hate my real name and kernel requires it
Thanks for working on this! And sorry for the slow response. I've been
unexpectedly very busy lately, but I plan to test out this patch next
week.
> >
> > drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> > index 2f9be182fbfb..d9fd5294e142 100644
> > --- a/drivers/net/wireless/ath/ath10k/core.c
> > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > u32 len, remaining_len;
> >
> > hw_mem = ath10k_coredump_get_mem_layout(ar);
> > - if (!hw_mem)
> > + if (!hw_mem) {
> > + ath10k_warn(ar, "No hardware memory");
> > return -ENOMEM;
> > + }
> >
> > for (i = 0; i < hw_mem->region_table.size; i++) {
> > tmp = &hw_mem->region_table.regions[i];
> > @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > }
> > }
> >
> > - if (!mem_region)
> > + if (!mem_region) {
> > + ath10k_warn(ar, "No memory region");
> > return -ENOMEM;
> > + }
> >
> > for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> > if (ar->wmi.mem_chunks[i].req_id ==
> > @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> > if (status) {
> > ath10k_warn(ar, "failed to copy target iram contents: %d",
> > status);
> > - goto err_hif_stop;
> > }
> > }
> >
> > --
> > 2.32.0
Sorry again for the slow response time.
I got around to testing this today on my hardware. I tested with a
vanilla 5.13.8 kernel, and then the same kernel with this patch
applied. Long story short, the patch does indeed seem to at least work
around the issue I was seeing in [1]. With this patch applied, I still
get the same "failed to copy target iram contents" error, but the
interface comes up and seems to be functional regardless.
So, for what it's worth (granted I am no wireless expert!), you can take:
Tested-by: Axel Rasmussen <[email protected]>
(This issue has nothing to do with my full time job, but I'm meant to
use my @google.com address for any open source contributions, which I
believe applies to commit messages too.)
[1]: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
Here are the two dmesg outputs, for comparison:
# uname -a
Linux router 5.13.8 #1 SMP Wed Aug 11 20:18:51 PDT 2021 x86_64 AMD
GX-412TC SOC AuthenticAMD GNU/Linux
# dmesg | grep ath
[ 12.491747] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 12.613341] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 12.613367] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1
tracing 1 dfs 1 testmode 0
[ 12.615071] ath10k_pci 0000:04:00.0: firmware ver
10.4-3.9.0.2-00131 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
crc32 23bd9e43
[ 13.846538] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31
crc32 85498734
[ 16.428502] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 16.518692] ath10k_pci 0000:04:00.0: could not init core (-12)
[ 16.518950] ath10k_pci 0000:04:00.0: could not probe fw (-12)
# uname -a
Linux router 5.13.8+ #2 SMP Wed Aug 11 20:28:56 PDT 2021 x86_64 AMD
GX-412TC SOC AuthenticAMD GNU/Linux
# dmesg | grep ath
[ 12.201239] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 12.323354] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 12.323407] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1
tracing 1 dfs 1 testmode 0
[ 12.325162] ath10k_pci 0000:04:00.0: firmware ver
10.4-3.9.0.2-00131 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-reco
very crc32 23bd9e43
[ 13.556748] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31
crc32 85498734
[ 16.155848] ath10k_pci 0000:04:00.0: No hardware memory
[ 16.155873] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 16.267376] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal otp max-sta 512 raw 0 hwcrypto 1
[ 16.382257] ath: EEPROM regdomain sanitized
[ 16.382289] ath: EEPROM regdomain: 0x64
[ 16.382306] ath: EEPROM indicates we should expect a direct regpair map
[ 16.382312] ath: Country alpha2 being used: 00
[ 16.382316] ath: Regpair used: 0x64
[ 16.393599] ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0
[ 41.264025] ath10k_pci 0000:04:00.0: No hardware memory
[ 41.264045] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
[ 41.480677] ath10k_pci 0000:04:00.0: Unknown eventid: 36933
On Sun, Aug 1, 2021 at 7:23 PM Axel Rasmussen <[email protected]> wrote:
>
> On Thu, Jul 22, 2021 at 12:42 PM ojab // <[email protected]> wrote:
> >
> > See also: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
> >
> > On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
> > >
> > > After reboot with kernel & firmware updates I found `failed to copy
> > > target iram contents:` in dmesg and missing wlan interfaces for both
> > > of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> > > it, so while I have no idea what's actually happening, I don't see why
> > > we should fail in this case, looks like some optional firmware ability
> > > that could be skipped.
> > >
> > > Also with additional logging there is
> > > ```
> > > [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> > > [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> > > [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> > > [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> > > ```
> > > so exact branch could be seen.
> > >
> > > Signed-off-by: Slava Kardakov <[email protected]>
> > > ---
> > > Of course I forgot to sing off, since I don't use it by default because I
> > > hate my real name and kernel requires it
>
> Thanks for working on this! And sorry for the slow response. I've been
> unexpectedly very busy lately, but I plan to test out this patch next
> week.
>
> > >
> > > drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> > > 1 file changed, 6 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> > > index 2f9be182fbfb..d9fd5294e142 100644
> > > --- a/drivers/net/wireless/ath/ath10k/core.c
> > > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > > @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > > u32 len, remaining_len;
> > >
> > > hw_mem = ath10k_coredump_get_mem_layout(ar);
> > > - if (!hw_mem)
> > > + if (!hw_mem) {
> > > + ath10k_warn(ar, "No hardware memory");
> > > return -ENOMEM;
> > > + }
> > >
> > > for (i = 0; i < hw_mem->region_table.size; i++) {
> > > tmp = &hw_mem->region_table.regions[i];
> > > @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > > }
> > > }
> > >
> > > - if (!mem_region)
> > > + if (!mem_region) {
> > > + ath10k_warn(ar, "No memory region");
> > > return -ENOMEM;
> > > + }
> > >
> > > for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> > > if (ar->wmi.mem_chunks[i].req_id ==
> > > @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> > > if (status) {
> > > ath10k_warn(ar, "failed to copy target iram contents: %d",
> > > status);
> > > - goto err_hif_stop;
> > > }
> > > }
> > >
> > > --
> > > 2.32.0
Hello, I have the same problem with my QCA9984 cards and also tested the
patch successfully.
See > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1939937
best regards
Am 12.08.21 um 22:21 schrieb Axel Rasmussen:
> Sorry again for the slow response time.
>
> I got around to testing this today on my hardware. I tested with a
> vanilla 5.13.8 kernel, and then the same kernel with this patch
> applied. Long story short, the patch does indeed seem to at least work
> around the issue I was seeing in [1]. With this patch applied, I still
> get the same "failed to copy target iram contents" error, but the
> interface comes up and seems to be functional regardless.
>
> So, for what it's worth (granted I am no wireless expert!), you can take:
>
> Tested-by: Axel Rasmussen <[email protected]>
>
> (This issue has nothing to do with my full time job, but I'm meant to
> use my @google.com address for any open source contributions, which I
> believe applies to commit messages too.)
>
> [1]: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
>
>
>
> Here are the two dmesg outputs, for comparison:
>
> # uname -a
> Linux router 5.13.8 #1 SMP Wed Aug 11 20:18:51 PDT 2021 x86_64 AMD
> GX-412TC SOC AuthenticAMD GNU/Linux
> # dmesg | grep ath
> [ 12.491747] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 12.613341] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 12.613367] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1
> tracing 1 dfs 1 testmode 0
> [ 12.615071] ath10k_pci 0000:04:00.0: firmware ver
> 10.4-3.9.0.2-00131 api 5 features
> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
> crc32 23bd9e43
> [ 13.846538] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31
> crc32 85498734
> [ 16.428502] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> [ 16.518692] ath10k_pci 0000:04:00.0: could not init core (-12)
> [ 16.518950] ath10k_pci 0000:04:00.0: could not probe fw (-12)
>
>
>
> # uname -a
> Linux router 5.13.8+ #2 SMP Wed Aug 11 20:28:56 PDT 2021 x86_64 AMD
> GX-412TC SOC AuthenticAMD GNU/Linux
> # dmesg | grep ath
> [ 12.201239] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 12.323354] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 12.323407] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1
> tracing 1 dfs 1 testmode 0
> [ 12.325162] ath10k_pci 0000:04:00.0: firmware ver
> 10.4-3.9.0.2-00131 api 5 features
> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-reco
> very crc32 23bd9e43
> [ 13.556748] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31
> crc32 85498734
> [ 16.155848] ath10k_pci 0000:04:00.0: No hardware memory
> [ 16.155873] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> [ 16.267376] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
> cal otp max-sta 512 raw 0 hwcrypto 1
> [ 16.382257] ath: EEPROM regdomain sanitized
> [ 16.382289] ath: EEPROM regdomain: 0x64
> [ 16.382306] ath: EEPROM indicates we should expect a direct regpair map
> [ 16.382312] ath: Country alpha2 being used: 00
> [ 16.382316] ath: Regpair used: 0x64
> [ 16.393599] ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0
> [ 41.264025] ath10k_pci 0000:04:00.0: No hardware memory
> [ 41.264045] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> [ 41.480677] ath10k_pci 0000:04:00.0: Unknown eventid: 36933
>
> On Sun, Aug 1, 2021 at 7:23 PM Axel Rasmussen <[email protected]> wrote:
>> On Thu, Jul 22, 2021 at 12:42 PM ojab // <[email protected]> wrote:
>>> See also: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html
>>>
>>> On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
>>>> After reboot with kernel & firmware updates I found `failed to copy
>>>> target iram contents:` in dmesg and missing wlan interfaces for both
>>>> of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
>>>> it, so while I have no idea what's actually happening, I don't see why
>>>> we should fail in this case, looks like some optional firmware ability
>>>> that could be skipped.
>>>>
>>>> Also with additional logging there is
>>>> ```
>>>> [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
>>>> [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
>>>> [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
>>>> [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
>>>> ```
>>>> so exact branch could be seen.
>>>>
>>>> Signed-off-by: Slava Kardakov <[email protected]>
>>>> ---
>>>> Of course I forgot to sing off, since I don't use it by default because I
>>>> hate my real name and kernel requires it
>> Thanks for working on this! And sorry for the slow response. I've been
>> unexpectedly very busy lately, but I plan to test out this patch next
>> week.
>>
>>>> drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
>>>> 1 file changed, 6 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
>>>> index 2f9be182fbfb..d9fd5294e142 100644
>>>> --- a/drivers/net/wireless/ath/ath10k/core.c
>>>> +++ b/drivers/net/wireless/ath/ath10k/core.c
>>>> @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
>>>> u32 len, remaining_len;
>>>>
>>>> hw_mem = ath10k_coredump_get_mem_layout(ar);
>>>> - if (!hw_mem)
>>>> + if (!hw_mem) {
>>>> + ath10k_warn(ar, "No hardware memory");
>>>> return -ENOMEM;
>>>> + }
>>>>
>>>> for (i = 0; i < hw_mem->region_table.size; i++) {
>>>> tmp = &hw_mem->region_table.regions[i];
>>>> @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
>>>> }
>>>> }
>>>>
>>>> - if (!mem_region)
>>>> + if (!mem_region) {
>>>> + ath10k_warn(ar, "No memory region");
>>>> return -ENOMEM;
>>>> + }
>>>>
>>>> for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
>>>> if (ar->wmi.mem_chunks[i].req_id ==
>>>> @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
>>>> if (status) {
>>>> ath10k_warn(ar, "failed to copy target iram contents: %d",
>>>> status);
>>>> - goto err_hif_stop;
>>>> }
>>>> }
>>>>
>>>> --
>>>> 2.32.0
> _______________________________________________
> ath10k mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/ath10k
>
>
Can I haz it merged?
//wbr ojab
On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
>
> After reboot with kernel & firmware updates I found `failed to copy
> target iram contents:` in dmesg and missing wlan interfaces for both
> of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> it, so while I have no idea what's actually happening, I don't see why
> we should fail in this case, looks like some optional firmware ability
> that could be skipped.
>
> Also with additional logging there is
> ```
> [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> ```
> so exact branch could be seen.
>
> Signed-off-by: Slava Kardakov <[email protected]>
> ---
> Of course I forgot to sing off, since I don't use it by default because I
> hate my real name and kernel requires it
>
> drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> index 2f9be182fbfb..d9fd5294e142 100644
> --- a/drivers/net/wireless/ath/ath10k/core.c
> +++ b/drivers/net/wireless/ath/ath10k/core.c
> @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> u32 len, remaining_len;
>
> hw_mem = ath10k_coredump_get_mem_layout(ar);
> - if (!hw_mem)
> + if (!hw_mem) {
> + ath10k_warn(ar, "No hardware memory");
> return -ENOMEM;
> + }
>
> for (i = 0; i < hw_mem->region_table.size; i++) {
> tmp = &hw_mem->region_table.regions[i];
> @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> }
> }
>
> - if (!mem_region)
> + if (!mem_region) {
> + ath10k_warn(ar, "No memory region");
> return -ENOMEM;
> + }
>
> for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> if (ar->wmi.mem_chunks[i].req_id ==
> @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> if (status) {
> ath10k_warn(ar, "failed to copy target iram contents: %d",
> status);
> - goto err_hif_stop;
> }
> }
>
> --
> 2.32.0
Gentle ping.
//wbr ojab
On Wed, 25 Aug 2021 at 19:15, ojab // <[email protected]> wrote:
>
> Can I haz it merged?
>
> //wbr ojab
>
> On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
> >
> > After reboot with kernel & firmware updates I found `failed to copy
> > target iram contents:` in dmesg and missing wlan interfaces for both
> > of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> > it, so while I have no idea what's actually happening, I don't see why
> > we should fail in this case, looks like some optional firmware ability
> > that could be skipped.
> >
> > Also with additional logging there is
> > ```
> > [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> > [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> > [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> > [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> > ```
> > so exact branch could be seen.
> >
> > Signed-off-by: Slava Kardakov <[email protected]>
> > ---
> > Of course I forgot to sing off, since I don't use it by default because I
> > hate my real name and kernel requires it
> >
> > drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> > index 2f9be182fbfb..d9fd5294e142 100644
> > --- a/drivers/net/wireless/ath/ath10k/core.c
> > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > u32 len, remaining_len;
> >
> > hw_mem = ath10k_coredump_get_mem_layout(ar);
> > - if (!hw_mem)
> > + if (!hw_mem) {
> > + ath10k_warn(ar, "No hardware memory");
> > return -ENOMEM;
> > + }
> >
> > for (i = 0; i < hw_mem->region_table.size; i++) {
> > tmp = &hw_mem->region_table.regions[i];
> > @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > }
> > }
> >
> > - if (!mem_region)
> > + if (!mem_region) {
> > + ath10k_warn(ar, "No memory region");
> > return -ENOMEM;
> > + }
> >
> > for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> > if (ar->wmi.mem_chunks[i].req_id ==
> > @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> > if (status) {
> > ath10k_warn(ar, "failed to copy target iram contents: %d",
> > status);
> > - goto err_hif_stop;
> > }
> > }
> >
> > --
> > 2.32.0
._.
//wbr ojab
On Thu, 9 Sept 2021 at 02:42, ojab // <[email protected]> wrote:
>
> Gentle ping.
>
> //wbr ojab
>
> On Wed, 25 Aug 2021 at 19:15, ojab // <[email protected]> wrote:
> >
> > Can I haz it merged?
> >
> > //wbr ojab
> >
> > On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
> > >
> > > After reboot with kernel & firmware updates I found `failed to copy
> > > target iram contents:` in dmesg and missing wlan interfaces for both
> > > of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> > > it, so while I have no idea what's actually happening, I don't see why
> > > we should fail in this case, looks like some optional firmware ability
> > > that could be skipped.
> > >
> > > Also with additional logging there is
> > > ```
> > > [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> > > [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> > > [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> > > [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> > > ```
> > > so exact branch could be seen.
> > >
> > > Signed-off-by: Slava Kardakov <[email protected]>
> > > ---
> > > Of course I forgot to sing off, since I don't use it by default because I
> > > hate my real name and kernel requires it
> > >
> > > drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> > > 1 file changed, 6 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> > > index 2f9be182fbfb..d9fd5294e142 100644
> > > --- a/drivers/net/wireless/ath/ath10k/core.c
> > > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > > @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > > u32 len, remaining_len;
> > >
> > > hw_mem = ath10k_coredump_get_mem_layout(ar);
> > > - if (!hw_mem)
> > > + if (!hw_mem) {
> > > + ath10k_warn(ar, "No hardware memory");
> > > return -ENOMEM;
> > > + }
> > >
> > > for (i = 0; i < hw_mem->region_table.size; i++) {
> > > tmp = &hw_mem->region_table.regions[i];
> > > @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> > > }
> > > }
> > >
> > > - if (!mem_region)
> > > + if (!mem_region) {
> > > + ath10k_warn(ar, "No memory region");
> > > return -ENOMEM;
> > > + }
> > >
> > > for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> > > if (ar->wmi.mem_chunks[i].req_id ==
> > > @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> > > if (status) {
> > > ath10k_warn(ar, "failed to copy target iram contents: %d",
> > > status);
> > > - goto err_hif_stop;
> > > }
> > > }
> > >
> > > --
> > > 2.32.0
oh, awesome. Thanks!
//wbr ojab
On Sat, 18 Sept 2021 at 13:12, [email protected] <[email protected]> wrote:
>
> Have you seen the new patch?
>
> https://www.mail-archive.com/[email protected]/msg13784.html
>
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=973de582639a1e45276e4e3e2f3c2d82a04ad0a6
>
>
> could probably have been communicated better
>
>
> best regards
>
>
>
> Am 17.09.21 um 21:30 schrieb ojab //:
> > ._.
> >
> > //wbr ojab
> >
> > On Thu, 9 Sept 2021 at 02:42, ojab // <[email protected]> wrote:
> >> Gentle ping.
> >>
> >> //wbr ojab
> >>
> >> On Wed, 25 Aug 2021 at 19:15, ojab // <[email protected]> wrote:
> >>> Can I haz it merged?
> >>>
> >>> //wbr ojab
> >>>
> >>> On Thu, 22 Jul 2021 at 22:36, ojab <[email protected]> wrote:
> >>>> After reboot with kernel & firmware updates I found `failed to copy
> >>>> target iram contents:` in dmesg and missing wlan interfaces for both
> >>>> of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> >>>> it, so while I have no idea what's actually happening, I don't see why
> >>>> we should fail in this case, looks like some optional firmware ability
> >>>> that could be skipped.
> >>>>
> >>>> Also with additional logging there is
> >>>> ```
> >>>> [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> >>>> [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> >>>> [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> >>>> [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> >>>> ```
> >>>> so exact branch could be seen.
> >>>>
> >>>> Signed-off-by: Slava Kardakov <[email protected]>
> >>>> ---
> >>>> Of course I forgot to sing off, since I don't use it by default because I
> >>>> hate my real name and kernel requires it
> >>>>
> >>>> drivers/net/wireless/ath/ath10k/core.c | 9 ++++++---
> >>>> 1 file changed, 6 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> >>>> index 2f9be182fbfb..d9fd5294e142 100644
> >>>> --- a/drivers/net/wireless/ath/ath10k/core.c
> >>>> +++ b/drivers/net/wireless/ath/ath10k/core.c
> >>>> @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> >>>> u32 len, remaining_len;
> >>>>
> >>>> hw_mem = ath10k_coredump_get_mem_layout(ar);
> >>>> - if (!hw_mem)
> >>>> + if (!hw_mem) {
> >>>> + ath10k_warn(ar, "No hardware memory");
> >>>> return -ENOMEM;
> >>>> + }
> >>>>
> >>>> for (i = 0; i < hw_mem->region_table.size; i++) {
> >>>> tmp = &hw_mem->region_table.regions[i];
> >>>> @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct ath10k *ar)
> >>>> }
> >>>> }
> >>>>
> >>>> - if (!mem_region)
> >>>> + if (!mem_region) {
> >>>> + ath10k_warn(ar, "No memory region");
> >>>> return -ENOMEM;
> >>>> + }
> >>>>
> >>>> for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
> >>>> if (ar->wmi.mem_chunks[i].req_id ==
> >>>> @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
> >>>> if (status) {
> >>>> ath10k_warn(ar, "failed to copy target iram contents: %d",
> >>>> status);
> >>>> - goto err_hif_stop;
> >>>> }
> >>>> }
> >>>>
> >>>> --
> >>>> 2.32.0
> > _______________________________________________
> > ath10k mailing list
> > [email protected]
> > http://lists.infradead.org/mailman/listinfo/ath10k
> >
> >
>
"[email protected]" <[email protected]> writes:
> Have you seen the new patch?
>
> https://www.mail-archive.com/[email protected]/msg13784.html
>
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=973de582639a1e45276e4e3e2f3c2d82a04ad0a6
>
>
> could probably have been communicated better
Yeah, apparently there are two different fixes now. I'll review both of
them and try to choose which one to take.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Am 21.09.21 um 09:29 schrieb Kalle Valo:
> "[email protected]" <[email protected]> writes:
>
>> Have you seen the new patch?
>>
>> https://www.mail-archive.com/[email protected]/msg13784.html
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=master-pending&id=973de582639a1e45276e4e3e2f3c2d82a04ad0a6
>>
>>
>> could probably have been communicated better
> Yeah, apparently there are two different fixes now. I'll review both of
> them and try to choose which one to take.
>
I have tested both fixes (x86_64 2x QCA9984)
For me both of them work.
[PATCH V2] ath10k: don't fail if IRAM write fails:
[18245.610112] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[18245.674800] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[18245.731606] ath10k_pci 0000:03:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[18245.731620] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 0
[18245.733172] ath10k_pci 0000:03:00.0: firmware ver 10.4-3.9.0.2-00152
api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
crc32 723f9771
[18245.790380] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[18245.790383] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 0
[18245.790703] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.9.0.2-00152
api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
crc32 723f9771
[18246.963760] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id 0:1
crc32 85498734
[18247.019699] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:2
crc32 85498734
[18249.514054] ath10k_pci 0000:03:00.0: No hardware memory
[18249.514057] ath10k_pci 0000:03:00.0: failed to copy target iram
contents: -12
[18249.570423] ath10k_pci 0000:04:00.0: No hardware memory
[18249.570426] ath10k_pci 0000:04:00.0: failed to copy target iram
contents: -12
[18249.620637] ath10k_pci 0000:03:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal otp max-sta 512 raw 0 hwcrypto 1
[18249.678035] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal otp max-sta 512 raw 0 hwcrypto 1
ath10k: Fix device boot error:
[ 3.318932] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 3.377071] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 3.434051] ath10k_pci 0000:03:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 3.434054] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 0
[ 3.434412] ath10k_pci 0000:03:00.0: firmware ver 10.4-3.9.0.2-00152
api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
crc32 723f9771
[ 3.487225] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 3.487229] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 0
[ 3.487568] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.9.0.2-00152
api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery
crc32 723f9771
[ 4.665772] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id 0:1
crc32 85498734
[ 4.716549] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:2
crc32 85498734
[ 7.423192] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal otp max-sta 512 raw 0 hwcrypto 1
[ 7.443109] ath10k_pci 0000:03:00.0: htt-ver 2.2 wmi-op 6 htt-op 4
cal otp max-sta 512 raw 0 hwcrypto 1
the second fixes the error message completely and "IRAM recovery" seems
to work
best regards
ojab <[email protected]> wrote:
> After reboot with kernel & firmware updates I found `failed to copy
> target iram contents:` in dmesg and missing wlan interfaces for both
> of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed
> it, so while I have no idea what's actually happening, I don't see why
> we should fail in this case, looks like some optional firmware ability
> that could be skipped.
>
> Also with additional logging there is
> ```
> [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory
> [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12
> [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory
> [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram contents: -12
> ```
> so exact branch could be seen.
>
> Signed-off-by: Slava Kardakov <[email protected]>
> Tested-by: Axel Rasmussen <[email protected]>
I'm planning to take this patch instead:
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
Patch set to Superseded.
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches