From: Sean Wang <[email protected]>
Add MU EDCA MCU command support to update MU AC parameter record field
from the access point.
Co-developed-by: Eric-SY Chang <[email protected]>
Signed-off-by: Eric-SY Chang <[email protected]>
Tested-by: Eric-SY Chang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
---
.../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 +
.../net/wireless/mediatek/mt76/mt7921/mcu.c | 56 ++++++++++++++++++-
2 files changed, 54 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index cb36dd39221c..0ce670d65673 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -563,6 +563,7 @@ enum {
MCU_CMD_SCHED_SCAN_ENABLE = MCU_CE_PREFIX | 0x61,
MCU_CMD_SCHED_SCAN_REQ = MCU_CE_PREFIX | 0x62,
MCU_CMD_GET_NIC_CAPAB = MCU_CE_PREFIX | 0x8a,
+ MCU_CMD_SET_MU_EDCA_PARMS = MCU_CE_PREFIX | 0xb0,
MCU_CMD_REG_WRITE = MCU_CE_PREFIX | 0xc0,
MCU_CMD_REG_READ = MCU_CE_PREFIX | MCU_QUERY_MASK | 0xc0,
MCU_CMD_CHIP_CONFIG = MCU_CE_PREFIX | 0xca,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 56fb7e54e283..53b2eaad2af7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -974,7 +974,31 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
.total = IEEE80211_NUM_ACS,
};
struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
- int ac;
+
+ struct mu_edca {
+ u8 cw_min;
+ u8 cw_max;
+ u8 aifsn;
+ u8 acm;
+ u8 timer;
+ u8 padding[3];
+ };
+ struct mt7921_mcu_mu_tx {
+ u8 ver;
+ u8 pad0;
+ u16 len;
+ u8 bss_idx;
+ u8 qos;
+ u8 wmm_idx;
+ u8 pad1;
+ struct mu_edca edca[IEEE80211_NUM_ACS];
+ u8 pad3[32];
+ } __packed req_mu = {
+ .bss_idx = mvif->mt76.idx,
+ .qos = vif->bss_conf.qos,
+ .wmm_idx = mvif->mt76.wmm_idx,
+ };
+ int ac, ret;
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac];
@@ -995,8 +1019,34 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
else
e->cw_max = cpu_to_le16(10);
}
- return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
- sizeof(req), true);
+
+ ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
+ sizeof(req), true);
+ if (ret)
+ return ret;
+
+ if (!vif->bss_conf.he_support)
+ return 0;
+
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ struct ieee80211_he_mu_edca_param_ac_rec *q;
+ struct mu_edca *e;
+ int to_aci[] = {1, 0, 2, 3};
+
+ if (!mvif->queue_params[ac].mu_edca)
+ break;
+
+ q = &mvif->queue_params[ac].mu_edca_param_rec;
+ e = &(req_mu.edca[to_aci[ac]]);
+
+ e->cw_min = q->ecw_min_max & 0xf;
+ e->cw_max = (q->ecw_min_max & 0xf0) >> 4;
+ e->aifsn = q->aifsn;
+ e->timer = q->mu_edca_timer;
+ }
+
+ return mt76_mcu_send_msg(&dev->mt76, MCU_CMD_SET_MU_EDCA_PARMS, &req_mu,
+ sizeof(req_mu), false);
}
int mt7921_mcu_set_chan_info(struct mt7921_phy *phy, int cmd)
--
2.25.1
> From: Sean Wang <[email protected]>
>
> Add MU EDCA MCU command support to update MU AC parameter record field
> from the access point.
>
> Co-developed-by: Eric-SY Chang <[email protected]>
> Signed-off-by: Eric-SY Chang <[email protected]>
> Tested-by: Eric-SY Chang <[email protected]>
> Signed-off-by: Sean Wang <[email protected]>
> ---
> .../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 +
> .../net/wireless/mediatek/mt76/mt7921/mcu.c | 56 ++++++++++++++++++-
> 2 files changed, 54 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> index cb36dd39221c..0ce670d65673 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> @@ -563,6 +563,7 @@ enum {
> MCU_CMD_SCHED_SCAN_ENABLE = MCU_CE_PREFIX | 0x61,
> MCU_CMD_SCHED_SCAN_REQ = MCU_CE_PREFIX | 0x62,
> MCU_CMD_GET_NIC_CAPAB = MCU_CE_PREFIX | 0x8a,
> + MCU_CMD_SET_MU_EDCA_PARMS = MCU_CE_PREFIX | 0xb0,
> MCU_CMD_REG_WRITE = MCU_CE_PREFIX | 0xc0,
> MCU_CMD_REG_READ = MCU_CE_PREFIX | MCU_QUERY_MASK | 0xc0,
> MCU_CMD_CHIP_CONFIG = MCU_CE_PREFIX | 0xca,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> index 56fb7e54e283..53b2eaad2af7 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> @@ -974,7 +974,31 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
> .total = IEEE80211_NUM_ACS,
> };
> struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> - int ac;
> +
can you please remove blank line here?
> + struct mu_edca {
> + u8 cw_min;
> + u8 cw_max;
> + u8 aifsn;
> + u8 acm;
> + u8 timer;
> + u8 padding[3];
> + };
> + struct mt7921_mcu_mu_tx {
> + u8 ver;
> + u8 pad0;
> + u16 len;
I guess __le16 here (even if it is not actually used)
Regards,
Lorenzo
> + u8 bss_idx;
> + u8 qos;
> + u8 wmm_idx;
> + u8 pad1;
> + struct mu_edca edca[IEEE80211_NUM_ACS];
> + u8 pad3[32];
> + } __packed req_mu = {
> + .bss_idx = mvif->mt76.idx,
> + .qos = vif->bss_conf.qos,
> + .wmm_idx = mvif->mt76.wmm_idx,
> + };
> + int ac, ret;
>
> for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
> struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac];
> @@ -995,8 +1019,34 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
> else
> e->cw_max = cpu_to_le16(10);
> }
> - return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
> - sizeof(req), true);
> +
> + ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
> + sizeof(req), true);
> + if (ret)
> + return ret;
> +
> + if (!vif->bss_conf.he_support)
> + return 0;
> +
> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
> + struct ieee80211_he_mu_edca_param_ac_rec *q;
> + struct mu_edca *e;
> + int to_aci[] = {1, 0, 2, 3};
> +
> + if (!mvif->queue_params[ac].mu_edca)
> + break;
> +
> + q = &mvif->queue_params[ac].mu_edca_param_rec;
> + e = &(req_mu.edca[to_aci[ac]]);
> +
> + e->cw_min = q->ecw_min_max & 0xf;
> + e->cw_max = (q->ecw_min_max & 0xf0) >> 4;
> + e->aifsn = q->aifsn;
> + e->timer = q->mu_edca_timer;
> + }
> +
> + return mt76_mcu_send_msg(&dev->mt76, MCU_CMD_SET_MU_EDCA_PARMS, &req_mu,
> + sizeof(req_mu), false);
> }
>
> int mt7921_mcu_set_chan_info(struct mt7921_phy *phy, int cmd)
> --
> 2.25.1
>