Convert mt76 dts bindings from .txt to .yaml
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
Changes since v3:
- do not repost patch 1/2
- use additionalProperties instead of unevaluatedProperties
- just use 'ieee80211-freq-limit: true'
Changes since v2:
- add myself as ieee80211.yaml maintainer
- add Ryder as mt76.yaml maintainer
- fix led node in mt76.yaml
- fix ieee80211.yaml refernce in mt76.yaml
- fix ieee80211-freq-limit property in ieee80211.yaml
Changes since v1:
- introduce ieee80211.yaml bindings
- remove unnecessary properties in mt76.yaml
---
.../bindings/net/wireless/mediatek,mt76.txt | 78 -----------
.../bindings/net/wireless/mediatek,mt76.yaml | 121 ++++++++++++++++++
2 files changed, 121 insertions(+), 78 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
create mode 100644 Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
deleted file mode 100644
index ab7e7a00e534..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-* MediaTek mt76xx devices
-
-This node provides properties for configuring the MediaTek mt76xx wireless
-device. The node is expected to be specified as a child node of the PCI
-controller to which the wireless chip is connected.
-
-Alternatively, it can specify the wireless part of the MT7628/MT7688 or
-MT7622 SoC. For SoC, use the following compatible strings:
-
-compatible:
-- "mediatek,mt7628-wmac" for MT7628/MT7688
-- "mediatek,mt7622-wmac" for MT7622
-
-properties:
-- reg: Address and length of the register set for the device.
-- interrupts: Main device interrupt
-
-MT7622 specific properties:
-- power-domains: phandle to the power domain that the WMAC is part of
-- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node
-
-Optional properties:
-
-- ieee80211-freq-limit: See ieee80211.txt
-- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data
-- big-endian: if the radio eeprom partition is written in big-endian, specify
- this property
-- mediatek,eeprom-merge-otp: Merge EEPROM data with OTP data. Can be used on
- boards where the flash calibration data is generic and specific calibration
- data should be pulled from the OTP ROM
-
-The MAC address can as well be set with corresponding optional properties
-defined in net/ethernet.txt.
-
-Optional nodes:
-- led: Properties for a connected LED
- Optional properties:
- - led-sources: See Documentation/devicetree/bindings/leds/common.txt
-
-&pcie {
- pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- ieee80211-freq-limit = <5000000 6000000>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- big-endian;
-
- led {
- led-sources = <2>;
- };
- };
- };
-};
-
-MT7628 example:
-
-wmac: wmac@10300000 {
- compatible = "mediatek,mt7628-wmac";
- reg = <0x10300000 0x100000>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <6>;
-
- mediatek,mtd-eeprom = <&factory 0x0000>;
-};
-
-MT7622 example:
-
-wmac: wmac@18000000 {
- compatible = "mediatek,mt7622-wmac";
- reg = <0 0x18000000 0 0x100000>;
- interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
-
- mediatek,infracfg = <&infracfg>;
-
- power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
new file mode 100644
index 000000000000..d6f835d17d66
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt76 wireless devices Generic Binding
+
+maintainers:
+ - Felix Fietkau <[email protected]>
+ - Lorenzo Bianconi <[email protected]>
+ - Ryder Lee <[email protected]>
+
+description: |
+ This node provides properties for configuring the MediaTek mt76xx
+ wireless device. The node is expected to be specified as a child
+ node of the PCI controller to which the wireless chip is connected.
+ Alternatively, it can specify the wireless part of the MT7628/MT7688
+ or MT7622 SoC.
+
+allOf:
+ - $ref: ieee80211.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt76
+ - mediatek,mt7628-wmac
+ - mediatek,mt7622-wmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the infrastructure bus fabric syscon node.
+ This property is MT7622 specific
+
+ ieee80211-freq-limit: true
+
+ mediatek,mtd-eeprom:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Phandle to a MTD partition + offset containing EEPROM data
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Specify if the radio eeprom partition is written in big-endian
+
+ mediatek,eeprom-merge-otp:
+ type: boolean
+ description:
+ Merge EEPROM data with OTP data. Can be used on boards where the flash
+ calibration data is generic and specific calibration data should be
+ pulled from the OTP ROM
+
+ led:
+ type: object
+ $ref: /schemas/leds/common.yaml#
+ additionalProperties: false
+ properties:
+ led-sources:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ big-endian;
+
+ led {
+ led-sources = <2>;
+ };
+ };
+ };
+
+ - |
+ wifi@10300000 {
+ compatible = "mediatek,mt7628-wmac";
+ reg = <0x10300000 0x100000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ wifi@18000000 {
+ compatible = "mediatek,mt7622-wmac";
+ reg = <0x10300000 0x100000>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+ mediatek,infracfg = <&infracfg>;
+
+ power-domains = <&scpsys 3>;
+ };
--
2.30.2
On Sun, 28 Mar 2021 19:37:48 +0200, Lorenzo Bianconi wrote:
> Convert mt76 dts bindings from .txt to .yaml
>
> Signed-off-by: Lorenzo Bianconi <[email protected]>
> ---
> Changes since v3:
> - do not repost patch 1/2
> - use additionalProperties instead of unevaluatedProperties
> - just use 'ieee80211-freq-limit: true'
>
> Changes since v2:
> - add myself as ieee80211.yaml maintainer
> - add Ryder as mt76.yaml maintainer
> - fix led node in mt76.yaml
> - fix ieee80211.yaml refernce in mt76.yaml
> - fix ieee80211-freq-limit property in ieee80211.yaml
>
> Changes since v1:
> - introduce ieee80211.yaml bindings
> - remove unnecessary properties in mt76.yaml
> ---
> .../bindings/net/wireless/mediatek,mt76.txt | 78 -----------
> .../bindings/net/wireless/mediatek,mt76.yaml | 121 ++++++++++++++++++
> 2 files changed, 121 insertions(+), 78 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
> create mode 100644 Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
>
Reviewed-by: Rob Herring <[email protected]>