Hi Matthew Garrett,
so i went home to read what you want from me to test.
The Directory </sys/bus/pci/slots/> is empty.
Si there something else i can test ?
I give you some more Information.
wes-nic:/sys/bus/pci/slots# lspci -d 14e4:4301 -vv
02:02.0 Network controller: Broadcom Corporation BCM4303 802.11b
Wireless LAN Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 12f3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e0104000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
Regards Markus
Maybe this is also interesting for you,
wes-nic:/sys/bus/pci/slots# lspci -vt
-[0000:00]-+-00.0 nVidia Corporation nForce3 Host Bridge
+-01.0 nVidia Corporation nForce3 LPC Bridge
+-01.1 nVidia Corporation nForce3 SMBus
+-02.0 nVidia Corporation nForce3 USB 1.1
+-02.1 nVidia Corporation nForce3 USB 1.1
+-02.2 nVidia Corporation nForce3 USB 2.0
+-06.0 nVidia Corporation nForce3 Audio
+-06.1 nVidia Corporation nForce3 Audio
+-08.0 nVidia Corporation nForce3 IDE
+-0a.0-[0000:02-0a]--+-00.0 Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
| +-01.0 Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
| +-02.0 Broadcom Corporation BCM4303
802.11b Wireless LAN Controller
| +-04.0 Texas Instruments PCI1620 PC
Card Controller
| +-04.1 Texas Instruments PCI1620 PC
Card Controller
| \-04.2 Texas Instruments PCI1620
Firmware Loading Function
+-0b.0-[0000:01]----00.0 nVidia Corporation NV17 [GeForce4
440 Go 64M]
+-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
+-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
+-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
\-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Regards Markus
I tried the newest Kernel <2.6.29.4> and it doean't work at all.
The same Problem with the rfkill Button. I can't activate my
wlan card without a functional ACPIPHP i think.
So i hope Matthew Garrett or something else will hear my
shout for help. :-)
In some days i have birthday and i wish me ... :-)
Regards Markus