Return-path: Received: from hpsmtp-eml17.KPNXCHANGE.COM ([213.75.38.117]:7144 "EHLO hpsmtp-eml17.kpnxchange.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751220AbXJULcc convert rfc822-to-8bit (ORCPT ); Sun, 21 Oct 2007 07:32:32 -0400 From: Frans Pop To: linux-wireless@vger.kernel.org Subject: [ath5k] Help needed for Trust Speedshare Turbo Pro (PCMCIA) Date: Sun, 21 Oct 2007 13:16:06 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Message-Id: <200710211316.06772.elendil@planet.nl> (sfid-20071021_123235_625638_8FAAA0DF) Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi, I just gave the new ath5k driver a go, but it fails for me with: pccard: CardBus card inserted into slot 0 PCI: Enabling device 0000:02:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16 ath5k_pci 0000:02:00.0: can't get channels I did a git fetch of wireless/everything branch: $ git describe v2.6.23-469-g4bcbd55 Modules were loaded automatically: mac80211 and ath5k. I was hoping for a better result as [1] lists my PCI ID as "OK", but maybe that is for the PCI version and not the PCMCIA one? The card works well with the madwifi driver (see below). The host system is a Toshiba Satellite A40 laptop (i386, Mobile Pentium 4) running Debian unstable. I can't help with coding, but am willing to test. Feel free ask for any additional info you need. Please CC me as I'm not subscribed. [1] http://linuxwireless.org/en/users/Drivers/ath5k Cheers, Frans Pop >From lspci -nn: 01:0b.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support [1179:0617] (rev 33) 02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5212 802.11abg NIC [168c:0013] (rev 01) >From lspci -vv: 01:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 33) Subsystem: Toshiba America Info Systems Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) Subsystem: Global Sun Technology Inc Unknown device 7103 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Output of dmesg with 2.6.18 and madwifi driver: pccard: CardBus card inserted into slot 0 PCI: Enabling device 0000:02:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 169 wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 5.9 phy 4.3 radio 4.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0x2e000000, irq=169 ath0: no IPv6 routers present