Return-path: Received: from hermes.matws.net ([88.175.162.123]:57042 "EHLO smtp.matws.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754480AbXKYSZQ (ORCPT ); Sun, 25 Nov 2007 13:25:16 -0500 Message-ID: <4749BE06.8050601@matws.net> (sfid-20071125_182524_249128_8E73451A) Date: Sun, 25 Nov 2007 21:25:10 +0300 From: Matthieu PATOU MIME-Version: 1.0 To: Larry Finger CC: linux-wireless@vger.kernel.org Subject: Re: BCM4312 status References: <47469E42.6050909@matws.net> <474984B1.90302@matws.net> <47499A1A.1060307@lwfinger.net> In-Reply-To: <47499A1A.1060307@lwfinger.net> Content-Type: multipart/mixed; boundary="------------010906060500040901040407" Sender: linux-wireless-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------010906060500040901040407 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Larry Finger a ?crit : > Matthieu PATOU wrote: >> And it keeps looping around the same set of message. >> >> Any clue on to solve this problem ? >> Any patch that i can test ? > These messages should only arise if you were using an unpatched kernel. > Are you sure you put the patch in correctly? The results reported was with your previous patch, because the second version didn't show good results when I first tried. So I tried the previous, which obviously didn't do the job neither ! So i removed the first patch, applied the second, checked, rebuild the modules, reboot the notebook a couple of time but I still have DMA errors. I attached the result of my dmesg and the patch I use in case i took the wrong one. I checked right now that this patch is really applied with this command : mat@ares:/usr/local/src/linux-2.6.24-git# patch -p1 --dry-run -R <../patchs/patch_bcm4312_2 patching file drivers/net/wireless/b43/dma.c patching file drivers/net/wireless/b43/main.c patching file drivers/net/wireless/b43/wa.c HTH Matthieu. --------------010906060500040901040407 Content-Type: text/plain; name="patch_bcm4312_2" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="patch_bcm4312_2" dma.c | 86 ++++++++++++++++++++++++++++++++++------------------------------- main.c | 3 +- wa.c | 1 3 files changed, 49 insertions(+), 41 deletions(-) Index: wireless-2.6/drivers/net/wireless/b43/dma.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43/dma.c +++ wireless-2.6/drivers/net/wireless/b43/dma.c @@ -165,7 +165,7 @@ static void op64_fill_descriptor(struct addrhi = (((u64) dmaaddr >> 32) & ~SSB_DMA_TRANSLATION_MASK); addrext = (((u64) dmaaddr >> 32) & SSB_DMA_TRANSLATION_MASK) >> SSB_DMA_TRANSLATION_SHIFT; - addrhi |= ssb_dma_translation(ring->dev->dev); + addrhi |= (ssb_dma_translation(ring->dev->dev) << 1); if (slot == ring->nr_slots - 1) ctl0 |= B43_DMA64_DCTL0_DTABLEEND; if (start) @@ -426,9 +426,20 @@ static inline static int alloc_ringmemory(struct b43_dmaring *ring) { struct device *dev = ring->dev->dev->dev; + gfp_t flags = GFP_KERNEL; + /* The specs call for 4K buffers for 30- and 32-bit DMA + * and 8K buffers for 64-bit DMA; however, 4K is sufficient for + * the latter as long as the buffer does not cross an 8K boundary. + * + * For unknown reasons - possibly a hardware error - the BCM4311 rev + * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, + * which accounts for the GFP_DMA flag below. + */ + if (ring->dma64) + flags = GFP_DMA; ring->descbase = dma_alloc_coherent(dev, B43_DMA_RINGMEMSIZE, - &(ring->dmabase), GFP_KERNEL); + &(ring->dmabase), flags); if (!ring->descbase) { b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); return -ENOMEM; @@ -483,7 +494,7 @@ int b43_dmacontroller_rx_reset(struct b4 return 0; } -/* Reset the RX DMA channel */ +/* Reset the TX DMA channel */ int b43_dmacontroller_tx_reset(struct b43_wldev *dev, u16 mmio_base, int dma64) { int i; @@ -636,18 +647,12 @@ static int dmacontroller_setup(struct b4 if (ring->dma64) { u64 ringbase = (u64) (ring->dmabase); - addrext = ((ringbase >> 32) & SSB_DMA_TRANSLATION_MASK) - >> SSB_DMA_TRANSLATION_SHIFT; - value = B43_DMA64_TXENABLE; - value |= (addrext << B43_DMA64_TXADDREXT_SHIFT) - & B43_DMA64_TXADDREXT_MASK; - b43_dma_write(ring, B43_DMA64_TXCTL, value); + b43_dma_write(ring, B43_DMA64_TXCTL, + B43_DMA64_TXENABLE); b43_dma_write(ring, B43_DMA64_TXRINGLO, (ringbase & 0xFFFFFFFF)); b43_dma_write(ring, B43_DMA64_TXRINGHI, - ((ringbase >> 32) & - ~SSB_DMA_TRANSLATION_MASK) - | trans); + (ringbase >> 32)); } else { u32 ringbase = (u32) (ring->dmabase); @@ -668,20 +673,15 @@ static int dmacontroller_setup(struct b4 if (ring->dma64) { u64 ringbase = (u64) (ring->dmabase); - addrext = ((ringbase >> 32) & SSB_DMA_TRANSLATION_MASK) - >> SSB_DMA_TRANSLATION_SHIFT; - value = (ring->frameoffset << B43_DMA64_RXFROFF_SHIFT); - value |= B43_DMA64_RXENABLE; - value |= (addrext << B43_DMA64_RXADDREXT_SHIFT) - & B43_DMA64_RXADDREXT_MASK; + value = (ring->frameoffset << B43_DMA64_RXFROFF_SHIFT) + | B43_DMA64_RXENABLE; b43_dma_write(ring, B43_DMA64_RXCTL, value); b43_dma_write(ring, B43_DMA64_RXRINGLO, (ringbase & 0xFFFFFFFF)); b43_dma_write(ring, B43_DMA64_RXRINGHI, - ((ringbase >> 32) & - ~SSB_DMA_TRANSLATION_MASK) - | trans); - b43_dma_write(ring, B43_DMA64_RXINDEX, 200); + (ringbase >> 32)); + b43_dma_write(ring, B43_DMA64_RXINDEX, ring->nr_slots * + sizeof(struct b43_dmadesc64)); } else { u32 ringbase = (u32) (ring->dmabase); @@ -695,11 +695,12 @@ static int dmacontroller_setup(struct b4 b43_dma_write(ring, B43_DMA32_RXRING, (ringbase & ~SSB_DMA_TRANSLATION_MASK) | trans); - b43_dma_write(ring, B43_DMA32_RXINDEX, 200); + b43_dma_write(ring, B43_DMA32_RXINDEX, ring->nr_slots * + sizeof(struct b43_dmadesc32)); } } - out: +out: return err; } @@ -954,19 +955,21 @@ int b43_dma_init(struct b43_wldev *dev) err = -ENOMEM; /* setup TX DMA channels. */ - ring = b43_setup_dmaring(dev, 0, 1, dma64); + ring = b43_setup_dmaring(dev, 1, 1, dma64); if (!ring) goto out; - dma->tx_ring0 = ring; + dma->tx_ring1 = ring; - ring = b43_setup_dmaring(dev, 1, 1, dma64); + /* The driver only uses ring1 for TX - skip setup for the rest */ +#if 0 + ring = b43_setup_dmaring(dev, 0, 1, dma64); if (!ring) - goto err_destroy_tx0; - dma->tx_ring1 = ring; + goto err_destroy_tx1; + dma->tx_ring0 = ring; ring = b43_setup_dmaring(dev, 2, 1, dma64); if (!ring) - goto err_destroy_tx1; + goto err_destroy_tx0; dma->tx_ring2 = ring; ring = b43_setup_dmaring(dev, 3, 1, dma64); @@ -983,6 +986,7 @@ int b43_dma_init(struct b43_wldev *dev) if (!ring) goto err_destroy_tx4; dma->tx_ring5 = ring; +#endif /* setup RX DMA channels. */ ring = b43_setup_dmaring(dev, 0, 0, dma64); @@ -1001,30 +1005,32 @@ int b43_dma_init(struct b43_wldev *dev) (dmamask == DMA_64BIT_MASK) ? 64 : (dmamask == DMA_32BIT_MASK) ? 32 : 30); err = 0; - out: +out: return err; - err_destroy_rx0: +err_destroy_rx0: b43_destroy_dmaring(dma->rx_ring0); dma->rx_ring0 = NULL; - err_destroy_tx5: +err_destroy_tx5: +#if 0 b43_destroy_dmaring(dma->tx_ring5); dma->tx_ring5 = NULL; - err_destroy_tx4: +err_destroy_tx4: b43_destroy_dmaring(dma->tx_ring4); dma->tx_ring4 = NULL; - err_destroy_tx3: +err_destroy_tx3: b43_destroy_dmaring(dma->tx_ring3); dma->tx_ring3 = NULL; - err_destroy_tx2: +err_destroy_tx2: b43_destroy_dmaring(dma->tx_ring2); dma->tx_ring2 = NULL; - err_destroy_tx1: - b43_destroy_dmaring(dma->tx_ring1); - dma->tx_ring1 = NULL; - err_destroy_tx0: +err_destroy_tx0: b43_destroy_dmaring(dma->tx_ring0); dma->tx_ring0 = NULL; +err_destroy_tx1: +#endif + b43_destroy_dmaring(dma->tx_ring1); + dma->tx_ring1 = NULL; goto out; } Index: wireless-2.6/drivers/net/wireless/b43/main.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43/main.c +++ wireless-2.6/drivers/net/wireless/b43/main.c @@ -93,6 +93,7 @@ static const struct ssb_device_id b43_ss SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13), SSB_DEVTABLE_END }; @@ -3064,7 +3065,7 @@ static int b43_phy_versioning(struct b43 unsupported = 1; break; case B43_PHYTYPE_G: - if (phy_rev > 8) + if (phy_rev > 9) unsupported = 1; break; default: Index: wireless-2.6/drivers/net/wireless/b43/wa.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43/wa.c +++ wireless-2.6/drivers/net/wireless/b43/wa.c @@ -642,6 +642,7 @@ void b43_wa_all(struct b43_wldev *dev) case 6: case 7: case 8: + case 9: b43_wa_tr_ltov(dev); b43_wa_crs_ed(dev); b43_wa_rssi_lt(dev); - --------------010906060500040901040407 Content-Type: text/plain; name="load_b43" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="load_b43" [ 0.000000] Linux version 2.6.24-rc3-ares (root@ares) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Nov 22 20:31:05 MSK 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable) [ 0.000000] BIOS-e820: 0000000077fb0000 - 0000000077fc8000 (reserved) [ 0.000000] BIOS-e820: 0000000077fc8000 - 0000000077fe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077fe7fb8 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 1023MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 491440) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 491440 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 491440 [ 0.000000] On node 0 totalpages: 491440 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2047 pages used for memmap [ 0.000000] HighMem zone: 260017 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE0B0, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT 77FC81BC, 0064 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP 77FC8084, 00F4 (r4 HP 0944 3 HP 1) [ 0.000000] ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock": [00008800] [0000000000008100], using 64X [20070126] [ 0.000000] ACPI: DSDT 77FC84A4, 11437 (r1 HP SB400 10000 MSFT 3000001) [ 0.000000] ACPI: FACS 77FE7D80, 0040 [ 0.000000] ACPI: SLIC 77FC8220, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: EPTH 77FC8398, 0038 (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: APIC 77FC83D0, 0062 (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 77FC8434, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: TCPA 77FC8470, 0032 (r2 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 77FD98DB, 0059 (r1 HP HPQNLP 1 MSFT 3000001) [ 0.000000] ACPI: SSDT 77FD9934, 0206 (r1 HP PSSTBLID 1 HP 1) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487601 [ 0.000000] Kernel command line: root=UUID=c7767a2d-354a-4a6a-b52a-43e1cae66973 ro [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.037 MHz processor. [ 26.365127] Console: colour VGA+ 80x25 [ 26.365130] console [tty0] enabled [ 26.370562] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 26.371358] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 26.524443] Memory: 1940136k/1965760k available (1949k kernel code, 24424k reserved, 946k data, 220k init, 1048256k highmem) [ 26.524545] virtual kernel memory layout: [ 26.524546] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 26.524547] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 26.524548] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 26.524550] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 26.524551] .init : 0xc03d9000 - 0xc0410000 ( 220 kB) [ 26.524552] .data : 0xc02e74f6 - 0xc03d3d84 ( 946 kB) [ 26.524553] .text : 0xc0100000 - 0xc02e74f6 (1949 kB) [ 26.525176] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 26.525401] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 26.605477] Calibrating delay using timer specific routine.. 3997.94 BogoMIPS (lpj=7995896) [ 26.605676] Security Framework initialized [ 26.605751] SELinux: Disabled at boot. [ 26.605849] Mount-cache hash table entries: 512 [ 26.606141] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 26.606165] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 26.606240] CPU: L2 Cache: 512K (64 bytes/line) [ 26.606330] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 26.606338] Compat vDSO mapped to ffffe000. [ 26.606435] Checking 'hlt' instruction... OK. [ 26.621954] SMP alternatives: switching to UP code [ 26.622912] ACPI: Core revision 20070126 [ 26.711975] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [ 26.712093] SMP alternatives: switching to SMP code [ 26.712493] Booting processor 1/1 eip 3000 [ 26.721030] Initializing CPU#1 [ 26.799856] Calibrating delay using timer specific routine.. 3990.34 BogoMIPS (lpj=7980692) [ 26.799862] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 26.799867] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 26.799869] CPU: L2 Cache: 512K (64 bytes/line) [ 26.799871] AMD C1E detected late. Force timer broadcast. [ 26.799873] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 26.801583] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [ 26.801876] Total of 2 processors activated (7988.29 BogoMIPS). [ 26.802055] ENABLING IO-APIC IRQs [ 26.802256] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 26.842039] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 26.842077] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 26.842146] ...trying to set up timer as Virtual Wire IRQ... works. [ 26.882076] Brought up 2 CPUs [ 26.882131] CPU0 attaching sched-domain: [ 26.882133] domain 0: span 03 [ 26.882135] groups: 01 02 [ 26.882138] CPU1 attaching sched-domain: [ 26.882139] domain 0: span 03 [ 26.882141] groups: 02 01 [ 26.882327] net_namespace: 64 bytes [ 26.882373] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 26.882863] NET: Registered protocol family 16 [ 26.883037] ACPI: bus type pci registered [ 26.883151] PCI: Using MMCONFIG [ 26.883222] PCI: No mmconfig possible on device 00:18 [ 26.883827] Setting up standard PCI resources [ 26.885605] ACPI: EC: Look up EC in DSDT [ 26.884739] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 27.125082] ACPI: Interpreter enabled [ 27.125120] ACPI: (supports S0 S3 S4 S5) [ 27.125287] ACPI: Using IOAPIC for interrupt routing [ 27.132662] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 27.132702] ACPI: EC: driver started in interrupt mode [ 27.132787] ACPI: PCI Root Bridge [C08B] (0000:00) [ 27.134272] PCI: Transparent bridge - 0000:00:14.4 [ 27.134401] ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] [ 27.134665] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] [ 27.134770] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] [ 27.153338] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. [ 27.153706] ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. [ 27.154069] ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. [ 27.154434] ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. [ 27.154800] ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. [ 27.155164] ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. [ 27.155499] ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. [ 27.155863] ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. [ 27.156203] ACPI: Power Resource [C171] (off) [ 27.156287] ACPI: Power Resource [C24C] (on) [ 27.156433] ACPI: Power Resource [C395] (off) [ 27.156556] ACPI: Power Resource [C396] (off) [ 27.156679] ACPI: Power Resource [C397] (off) [ 27.156802] ACPI: Power Resource [C398] (off) [ 27.156884] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.156946] pnp: PnP ACPI init [ 27.156987] ACPI: bus type pnp registered [ 27.163088] pnp: PnP ACPI: found 12 devices [ 27.163126] ACPI: ACPI bus type pnp unregistered [ 27.163264] PCI: Using ACPI for IRQ routing [ 27.163301] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.163373] PCI: Cannot allocate resource region 0 of device 0000:00:14.2 [ 27.192337] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 27.192377] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 27.192415] system 00:00: iomem range 0x100000-0xffffffff could not be reserved [ 27.192463] system 00:08: ioport range 0x40b-0x40b has been reserved [ 27.192502] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 27.192542] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 27.192585] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 27.192630] system 00:0a: ioport range 0x8000-0x802f has been reserved [ 27.192669] system 00:0a: ioport range 0x8100-0x811f has been reserved [ 27.192708] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 27.192751] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved [ 27.192794] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved [ 27.192836] system 00:0b: iomem range 0xcd400-0xcffff has been reserved [ 27.192875] system 00:0b: iomem range 0x0-0x7ffffff could not be reserved [ 27.192914] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 27.223313] PCI: Bridge: 0000:00:01.0 [ 27.223351] IO window: 4000-4fff [ 27.223389] MEM window: d0400000-d05fffff [ 27.223426] PREFETCH window: c0000000-c7ffffff [ 27.223465] PCI: Bridge: 0000:00:04.0 [ 27.223501] IO window: disabled. [ 27.223540] MEM window: d0000000-d00fffff [ 27.223577] PREFETCH window: disabled. [ 27.223614] PCI: Bridge: 0000:00:05.0 [ 27.223652] IO window: 2000-3fff [ 27.223689] MEM window: cc000000-cfffffff [ 27.223726] PREFETCH window: disabled. [ 27.223764] PCI: Bridge: 0000:00:06.0 [ 27.223801] IO window: disabled. [ 27.223838] MEM window: c8000000-c80fffff [ 27.223876] PREFETCH window: disabled. [ 27.223917] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 27.223956] IO window: 00001000-000010ff [ 27.225808] Time: acpi_pm clocksource has been installed. [ 27.225811] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 27.225813] Could not switch to high resolution mode on CPU 0 [ 27.224904] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 27.224978] Could not switch to high resolution mode on CPU 1 [ 27.225019] IO window: 00001400-000014ff [ 27.225059] PREFETCH window: 8c000000-8fffffff [ 27.225099] MEM window: 90000000-93ffffff [ 27.225138] PCI: Bridge: 0000:00:14.4 [ 27.225174] IO window: disabled. [ 27.225213] MEM window: d0100000-d03fffff [ 27.225252] PREFETCH window: disabled. [ 27.225302] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 27.225308] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 27.225314] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 27.225335] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 27.225422] NET: Registered protocol family 2 [ 27.268347] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.268667] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.269360] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 27.269704] TCP: Hash tables configured (established 131072 bind 65536) [ 27.269745] TCP reno registered [ 27.280398] checking if image is initramfs... it is [ 27.651295] Freeing initrd memory: 4498k freed [ 27.651962] audit: initializing netlink socket (disabled) [ 27.652010] audit(1196014372.020:1): initialized [ 27.652194] highmem bounce pool size: 64 pages [ 27.653998] io scheduler noop registered [ 27.654035] io scheduler anticipatory registered [ 27.654072] io scheduler deadline registered [ 27.654159] io scheduler cfq registered (default) [ 27.654261] Boot video device is 0000:01:05.0 [ 27.654364] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 27.654380] assign_interrupt_mode Found MSI capability [ 27.654418] Allocate Port Service[0000:00:04.0:pcie00] [ 27.654449] Allocate Port Service[0000:00:04.0:pcie03] [ 27.654499] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 27.654514] assign_interrupt_mode Found MSI capability [ 27.654553] Allocate Port Service[0000:00:05.0:pcie00] [ 27.654585] Allocate Port Service[0000:00:05.0:pcie03] [ 27.654635] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 27.654649] assign_interrupt_mode Found MSI capability [ 27.654688] Allocate Port Service[0000:00:06.0:pcie00] [ 27.654719] Allocate Port Service[0000:00:06.0:pcie03] [ 27.677129] Real Time Clock Driver v1.12ac [ 27.677274] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.678313] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.678360] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 27.678399] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 27.678686] PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 [ 27.680633] i8042.c: Detected active multiplexing controller, rev 1.1. [ 27.681441] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.681483] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 27.681522] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 27.681564] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 27.681605] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 27.681724] mice: PS/2 mouse device common for all mice [ 27.681872] cpuidle: using governor ladder [ 27.681910] cpuidle: using governor menu [ 27.682016] TCP cubic registered [ 27.682061] NET: Registered protocol family 1 [ 27.682117] Starting balanced_irq [ 27.682171] Using IPI No-Shortcut mode [ 27.682217] registered taskstats version 1 [ 27.682556] Freeing unused kernel memory: 220k freed [ 27.705191] input: AT Translated Set 2 keyboard as /class/input/input0 [ 27.833398] fuse init (API version 7.9) [ 27.836268] ACPI: Fan [C399] (off) [ 27.836403] ACPI: Fan [C39A] (off) [ 27.836529] ACPI: Fan [C39B] (off) [ 27.836658] ACPI: Fan [C39C] (off) [ 27.840819] ACPI: Processor [C000] (supports 8 throttling states) [ 27.840938] ACPI: Processor [C001] (supports 8 throttling states) [ 27.849623] ACPI: Thermal Zone [TZ1] (52 C) [ 27.858144] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 28.323941] tg3.c:v3.86 (November 9, 2007) [ 28.324049] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 28.324166] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 28.329849] SCSI subsystem initialized [ 28.337076] usbcore: registered new interface driver usbfs [ 28.337143] usbcore: registered new interface driver hub [ 28.337521] usbcore: registered new device driver usb [ 28.354467] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 28.360411] libata version 3.00 loaded. [ 29.155875] eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:4b:61:68:b6 [ 29.156108] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 29.156150] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 29.157725] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 18 [ 29.157816] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 29.158048] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 29.158111] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0601000 [ 29.216892] usb usb1: configuration #1 chosen from 1 choice [ 29.216957] hub 1-0:1.0: USB hub found [ 29.217000] hub 1-0:1.0: 2 ports detected [ 29.320846] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19 [ 29.320933] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 29.320999] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 29.321056] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0602000 [ 29.380792] usb usb2: configuration #1 chosen from 1 choice [ 29.380856] hub 2-0:1.0: USB hub found [ 29.380899] hub 2-0:1.0: 2 ports detected [ 29.484747] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 19 [ 29.484831] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 29.484888] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 29.484941] ohci_hcd 0000:00:13.2: irq 19, io mem 0xd0603000 [ 29.544705] usb usb3: configuration #1 chosen from 1 choice [ 29.544771] hub 3-0:1.0: USB hub found [ 29.544813] hub 3-0:1.0: 2 ports detected [ 29.632586] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 29.648666] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19 [ 29.648750] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 29.648806] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 29.648864] ohci_hcd 0000:00:13.3: irq 19, io mem 0xd0604000 [ 29.708619] usb usb4: configuration #1 chosen from 1 choice [ 29.708679] hub 4-0:1.0: USB hub found [ 29.708721] hub 4-0:1.0: 2 ports detected [ 29.812567] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 19 [ 29.812649] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 29.812706] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 29.812758] ohci_hcd 0000:00:13.4: irq 19, io mem 0xd0605000 [ 29.860533] usb 1-2: configuration #1 chosen from 1 choice [ 29.872534] usb usb5: configuration #1 chosen from 1 choice [ 29.872593] hub 5-0:1.0: USB hub found [ 29.872635] hub 5-0:1.0: 2 ports detected [ 29.975350] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 23 (level, low) -> IRQ 18 [ 29.975439] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 29.975511] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 29.975590] ehci_hcd 0000:00:13.5: debug port 1 [ 29.975635] ehci_hcd 0000:00:13.5: irq 18, io mem 0xd0606000 [ 29.975682] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.977227] usb 1-2: USB disconnect, address 2 [ 29.977149] usb usb6: configuration #1 chosen from 1 choice [ 29.977227] hub 6-0:1.0: USB hub found [ 29.977269] hub 6-0:1.0: 10 ports detected [ 30.079049] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [ 30.079108] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 30.079188] SB600_PATA: not 100% native mode: will probe irqs later [ 30.079233] ide0: BM-DMA at 0x5040-0x5047, BIOS settings: hda:DMA, hdb:pio [ 30.079344] Probing IDE interface ide0... [ 30.811996] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 31.045887] usb 1-2: configuration #1 chosen from 1 choice [ 31.486513] hda: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive [ 31.486673] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 31.487224] hda: MW DMA 2 mode selected [ 31.487673] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 31.512925] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 31.564831] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d0101000-d01017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 31.567456] ahci 0000:00:12.0: version 3.0 [ 31.567478] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 31.567567] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 31.567605] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 31.567644] ahci 0000:00:12.0: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports [ 31.567687] ahci 0000:00:12.0: forcing PORTS_IMPL to 0xf [ 32.569674] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 32.569723] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 32.570113] scsi0 : ahci [ 32.570385] scsi1 : ahci [ 32.570543] scsi2 : ahci [ 32.571494] scsi3 : ahci [ 32.571587] ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 17 [ 32.571630] ata2: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609180 irq 17 [ 32.571674] ata3: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609200 irq 17 [ 32.571718] ata4: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609280 irq 17 [ 32.839104] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929fd360e] [ 33.046897] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.045929] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100 [ 33.045972] ata1.00: 312581808 sectors, multi 16: LBA48 [ 33.048041] ata1.00: configured for UDMA/100 [ 33.358740] ata2: SATA link down (SStatus 0 SControl 0) [ 33.670585] ata3: SATA link down (SStatus 0 SControl 0) [ 33.982430] ata4: SATA link down (SStatus 0 SControl 0) [ 33.981071] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5 [ 33.998480] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 33.998533] sd 0:0:0:0: [sda] Write Protect is off [ 33.998571] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.998584] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.998671] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 33.998719] sd 0:0:0:0: [sda] Write Protect is off [ 33.998756] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.998768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.998811] sda:<6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA [ 34.005351] Uniform CD-ROM driver Revision: 3.20 [ 34.063398] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 34.106759] sd 0:0:0:0: [sda] Attached SCSI disk [ 34.108912] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 34.676046] Attempting manual resume [ 34.688164] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 34.688984] SGI XFS Quota Management subsystem [ 34.775235] XFS mounting filesystem sda7 [ 34.975307] Ending clean XFS mount for filesystem: sda7 [ 43.376260] Linux agpgart interface v0.102 [ 43.636018] ACPI: Battery Slot [C1ED] (battery present) [ 43.636282] ACPI: Battery Slot [C1EC] (battery absent) [ 43.644645] ACPI: AC Adapter [C1EB] (on-line) [ 43.694218] input: Power Button (FF) as /class/input/input1 [ 43.745578] ACPI: Power Button (FF) [PWRF] [ 43.745714] input: Sleep Button (CM) as /class/input/input2 [ 43.809545] ACPI: Sleep Button (CM) [C28D] [ 43.809642] input: Lid Switch as /class/input/input3 [ 43.841635] ACPI: Lid Switch [C265] [ 43.881231] input: Video Bus as /class/input/input4 [ 43.937596] ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) [ 44.487274] ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 21 [ 44.487359] PCI: Setting latency timer of device 0000:30:00.0 to 64 [ 44.526926] ssb: SPROM revision 3 detected. [ 44.545198] ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 [ 44.545270] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 44.557282] input: PC Speaker as /class/input/input5 [ 44.697815] Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2] [ 44.734686] Bluetooth: Core ver 2.11 [ 44.735231] NET: Registered protocol family 31 [ 44.735269] Bluetooth: HCI device and connection manager initialized [ 44.735309] Bluetooth: HCI socket layer initialized [ 44.756837] hci_usb: Unknown symbol hci_suspend_dev [ 44.756906] hci_usb: Unknown symbol hci_free_dev [ 44.757243] hci_usb: Unknown symbol hci_resume_dev [ 44.757341] hci_usb: Unknown symbol hci_alloc_dev [ 44.757487] hci_usb: Unknown symbol hci_unregister_dev [ 44.757591] hci_usb: Unknown symbol hci_recv_fragment [ 44.757685] hci_usb: Unknown symbol hci_register_dev [ 44.791380] Bluetooth: HCI USB driver ver 2.9 [ 44.793355] usbcore: registered new interface driver hci_usb [ 44.825719] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 44.825763] Socket status: 30000006 [ 44.825800] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 44.825847] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff [ 44.943956] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 45.221096] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 [ 45.221145] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 45.261056] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 45.864452] si3054: cannot initialize. EXT MID = 0000 [ 46.169816] Adding 1959888k swap on /dev/sda6. Priority:-1 extents:1 across:1959888k [ 47.034313] kjournald starting. Commit interval 5 seconds [ 47.036031] EXT3 FS on sda5, internal journal [ 47.036037] EXT3-fs: mounted filesystem with ordered data mode. [ 47.482189] Filesystem "dm-0": Disabling barriers, not supported by the underlying device [ 47.491975] XFS mounting filesystem dm-0 [ 47.565937] Ending clean XFS mount for filesystem: dm-0 [ 47.605595] Filesystem "dm-4": Disabling barriers, not supported by the underlying device [ 47.614285] XFS mounting filesystem dm-4 [ 47.672307] Ending clean XFS mount for filesystem: dm-4 [ 47.719837] Filesystem "dm-3": Disabling barriers, not supported by the underlying device [ 47.720018] XFS mounting filesystem dm-3 [ 47.951644] Ending clean XFS mount for filesystem: dm-3 [ 47.991811] Filesystem "dm-1": Disabling barriers, not supported by the underlying device [ 48.006627] XFS mounting filesystem dm-1 [ 48.117096] Ending clean XFS mount for filesystem: dm-1 [ 49.724522] No dock devices found. [ 49.858478] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 49.860042] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 [ 49.860047] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14 [ 49.860049] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15 [ 49.860051] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 49.860094] powernow-k8: ph2 null fid transition 0xc [ 51.003081] NET: Registered protocol family 10 [ 51.003293] lo: Disabled Privacy Extensions [ 51.083479] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.303943] Clocksource tsc unstable (delta = -100023885 ns) [ 60.646152] hda-intel: Invalid position buffer, using LPIB read method instead. [ 65.756020] b43-phy0: Broadcom 4311 WLAN found [ 65.772223] b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 9 [ 65.772235] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 [ 65.781839] b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config [ 65.782751] phy0: Selected rate control algorithm 'simple' [ 65.898377] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 66.359374] b43-phy0 debug: Chip initialized [ 66.359467] b43-phy0 debug: 64-bit DMA initialized [ 66.367521] b43-phy0 ERROR: PHY transmission error [ 66.367557] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 66.367597] b43-phy0: Controller RESET (DMA error) ... [ 66.367602] b43-phy0 debug: Wireless interface started [ 66.367621] b43-phy0 debug: Wireless interface stopped [ 66.367639] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 66.367664] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 66.412570] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 67.508775] b43-phy0 debug: Chip initialized [ 67.508869] b43-phy0 debug: 64-bit DMA initialized [ 67.529149] b43-phy0 debug: Wireless interface started [ 67.529154] b43-phy0: Controller restarted [ 67.529157] b43-phy0 debug: Adding Interface type 2 [ 67.530653] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 67.530735] b43-phy0: Controller RESET (DMA error) ... [ 67.530722] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 67.576525] b43-phy0 debug: Wireless interface stopped [ 67.576569] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 67.576606] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 67.689561] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 68.808150] b43-phy0 debug: Chip initialized [ 68.808256] b43-phy0 debug: 64-bit DMA initialized [ 68.828515] b43-phy0 debug: Wireless interface started [ 68.828519] b43-phy0: Controller restarted [ 68.829900] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 68.829981] b43-phy0: Controller RESET (DMA error) ... [ 68.875876] b43-phy0 debug: Wireless interface stopped [ 68.875901] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 68.875925] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 68.988878] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 70.107490] b43-phy0 debug: Chip initialized [ 70.107582] b43-phy0 debug: 64-bit DMA initialized [ 70.127862] b43-phy0 debug: Wireless interface started [ 70.127866] b43-phy0: Controller restarted [ 70.187227] b43-phy0 debug: Wireless interface stopped [ 70.187250] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 70.187276] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 70.300230] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 71.444084] b43-phy0 debug: Chip initialized [ 71.444408] b43-phy0 debug: 64-bit DMA initialized [ 71.465992] printk: 2 messages suppressed. [ 71.465997] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 71.466083] b43-phy0 debug: Wireless interface started [ 71.466754] b43-phy0 debug: Wireless interface stopped [ 71.466984] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 71.467226] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 71.576882] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 72.699479] b43-phy0 debug: Chip initialized [ 72.699719] b43-phy0 debug: 64-bit DMA initialized [ 72.721354] b43-phy0 debug: Wireless interface started [ 72.731286] b43-phy0 debug: Wireless interface stopped [ 72.731469] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 72.731677] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 72.844255] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 73.950862] b43-phy0 debug: Chip initialized [ 73.951100] b43-phy0 debug: 64-bit DMA initialized [ 73.972470] b43-phy0 debug: Wireless interface started [ 73.972685] b43-phy0 debug: Wireless interface stopped [ 73.972861] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 73.973069] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 74.083641] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 75.206225] b43-phy0 debug: Chip initialized [ 75.206501] b43-phy0 debug: 64-bit DMA initialized [ 75.227920] b43-phy0 debug: Wireless interface started [ 75.238044] b43-phy0 debug: Wireless interface stopped [ 75.238229] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 75.238438] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 75.351013] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 76.473611] b43-phy0 debug: Chip initialized [ 76.473853] b43-phy0 debug: 64-bit DMA initialized [ 76.495226] printk: 11 messages suppressed. [ 76.495230] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 76.495317] b43-phy0 debug: Wireless interface started [ 76.495890] b43-phy0 debug: Wireless interface stopped [ 76.496067] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 76.496274] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 76.606393] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 77.724992] b43-phy0 debug: Chip initialized [ 77.725230] b43-phy0 debug: 64-bit DMA initialized [ 77.745393] b43-phy0 debug: Wireless interface started [ 77.812708] b43-phy0 debug: Wireless interface stopped [ 77.812882] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 77.813082] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 77.925728] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 79.052335] b43-phy0 debug: Chip initialized [ 79.052549] b43-phy0 debug: 64-bit DMA initialized [ 79.072691] b43-phy0 debug: Wireless interface started [ 79.120059] b43-phy0 debug: Wireless interface stopped [ 79.120225] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 79.120420] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 79.233092] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 80.353635] b43-phy0 debug: Chip initialized [ 80.353758] b43-phy0 debug: 64-bit DMA initialized [ 80.375580] b43-phy0 debug: Wireless interface started [ 80.441369] b43-phy0 debug: Wireless interface stopped [ 80.441405] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 80.441446] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 80.554412] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 81.665001] b43-phy0 debug: Chip initialized [ 81.665117] b43-phy0 debug: 64-bit DMA initialized [ 81.686879] b43-phy0 debug: Wireless interface started [ 81.686889] printk: 11 messages suppressed. [ 81.686890] b43-phy0: Controller restarted [ 81.732732] b43-phy0 debug: Wireless interface stopped [ 81.732769] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 81.732807] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 81.845741] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 82.960342] b43-phy0 debug: Chip initialized [ 82.960459] b43-phy0 debug: 64-bit DMA initialized [ 82.982244] b43-phy0 debug: Wireless interface started [ 83.028088] b43-phy0 debug: Wireless interface stopped [ 83.028124] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 83.028163] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 83.141133] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 84.263697] b43-phy0 debug: Chip initialized [ 84.263813] b43-phy0 debug: 64-bit DMA initialized [ 84.285594] b43-phy0 debug: Wireless interface started [ 84.331442] b43-phy0 debug: Wireless interface stopped [ 84.331477] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 84.331513] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 84.444486] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 85.571070] b43-phy0 debug: Chip initialized [ 85.571186] b43-phy0 debug: 64-bit DMA initialized [ 85.592944] b43-phy0 debug: Wireless interface started [ 85.650789] b43-phy0 debug: Wireless interface stopped [ 85.650823] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 85.650861] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 85.763834] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 86.894395] b43-phy0 debug: Chip initialized [ 86.894511] b43-phy0 debug: 64-bit DMA initialized [ 86.916299] b43-phy0 debug: Wireless interface started [ 86.916308] printk: 11 messages suppressed. [ 86.916310] b43-phy0: Controller restarted [ 86.962140] b43-phy0 debug: Wireless interface stopped [ 86.962174] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 86.962211] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 87.075186] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 88.193769] b43-phy0 debug: Chip initialized [ 88.193884] b43-phy0 debug: 64-bit DMA initialized [ 88.215643] b43-phy0 debug: Wireless interface started [ 88.273491] b43-phy0 debug: Wireless interface stopped [ 88.273525] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 88.273563] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 88.386536] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 89.509101] b43-phy0 debug: Chip initialized [ 89.509219] b43-phy0 debug: 64-bit DMA initialized [ 89.530982] b43-phy0 debug: Wireless interface started [ 89.576845] b43-phy0 debug: Wireless interface stopped [ 89.576878] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 89.576915] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 2/128 [ 89.689891] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 90.804459] b43-phy0 debug: Chip initialized [ 90.804573] b43-phy0 debug: 64-bit DMA initialized [ 90.826538] b43-phy0 debug: Wireless interface started [ 90.884198] b43-phy0 debug: Wireless interface stopped [ 90.884233] b43-phy0 debug: DMA-64 0x0200 (RX) max used slots: 0/64 [ 90.884270] b43-phy0 debug: DMA-64 0x0240 (TX) max used slots: 0/128 [ 90.997245] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) --------------010906060500040901040407--