Return-path: Received: from mfe1.polimi.it ([131.175.12.23]:53817 "EHLO polimi.it" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751973AbXLPSXB (ORCPT ); Sun, 16 Dec 2007 13:23:01 -0500 Date: Sun, 16 Dec 2007 19:21:06 +0100 From: Stefano Brivio To: "John W. Linville" Cc: Larry Finger , linux-wireless@vger.kernel.org Subject: [PATCH] b43legacy: Fix rfkill radio LED Message-ID: <20071216192106.3defef1c@morte> (sfid-20071216_182306_186957_56CFFDE9) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Larry Finger This fixes Bug #9414 for b43legacy. This patch is the equivalent of one submitted earlier for b43. Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above and removes a couple of sparse warnings. Signed-off-by: Larry Finger Signed-off-by: Stefano Brivio --- John, the previous patch had wrapped lines, sorry. --- Index: wireless-2.6/drivers/net/wireless/b43legacy/rfkill.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43legacy/rfkill.c +++ wireless-2.6/drivers/net/wireless/b43legacy/rfkill.c @@ -26,6 +26,8 @@ #include "radio.h" #include "b43legacy.h" +#include + /* Returns TRUE, if the radio is enabled in hardware. */ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev) @@ -51,7 +53,10 @@ static void b43legacy_rfkill_poll(struct bool report_change = 0; mutex_lock(&wl->mutex); - B43legacy_WARN_ON(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED); + if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) { + mutex_unlock(&wl->mutex); + return; + } enabled = b43legacy_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; @@ -61,8 +66,12 @@ static void b43legacy_rfkill_poll(struct } mutex_unlock(&wl->mutex); - if (unlikely(report_change)) - input_report_key(poll_dev->input, KEY_WLAN, enabled); + /* send the radio switch event to the system - note both a key press + * and a release are required */ + if (unlikely(report_change)) { + input_report_key(poll_dev->input, KEY_WLAN, 1); + input_report_key(poll_dev->input, KEY_WLAN, 0); + } } /* Called when the RFKILL toggled in software. @@ -71,13 +80,15 @@ static int b43legacy_rfkill_soft_toggle( { struct b43legacy_wldev *dev = data; struct b43legacy_wl *wl = dev->wl; - int err = 0; + int err = -EBUSY; if (!wl->rfkill.registered) return 0; mutex_lock(&wl->mutex); - B43legacy_WARN_ON(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED); + if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) + goto out_unlock; + err = 0; switch (state) { case RFKILL_STATE_ON: if (!dev->radio_hw_enable) { @@ -103,11 +114,11 @@ out_unlock: char * b43legacy_rfkill_led_name(struct b43legacy_wldev *dev) { - struct b43legacy_wl *wl = dev->wl; + struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); - if (!wl->rfkill.rfkill) + if (!rfk->registered) return NULL; - return rfkill_get_led_name(wl->rfkill.rfkill); + return rfkill_get_led_name(rfk->rfkill); } void b43legacy_rfkill_init(struct b43legacy_wldev *dev) @@ -116,53 +127,13 @@ void b43legacy_rfkill_init(struct b43leg struct b43legacy_rfkill *rfk = &(wl->rfkill); int err; - if (rfk->rfkill) { - err = rfkill_register(rfk->rfkill); - if (err) { - b43legacywarn(wl, "Failed to register RF-kill button\n"); - goto err_free_rfk; - } - } - if (rfk->poll_dev) { - err = input_register_polled_device(rfk->poll_dev); - if (err) { - b43legacywarn(wl, "Failed to register RF-kill polldev\n"); - goto err_free_polldev; - } - } - - return; -err_free_rfk: - rfkill_free(rfk->rfkill); - rfk->rfkill = NULL; -err_free_polldev: - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; -} - -void b43legacy_rfkill_exit(struct b43legacy_wldev *dev) -{ - struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); - - if (rfk->poll_dev) - input_unregister_polled_device(rfk->poll_dev); - if (rfk->rfkill) - rfkill_unregister(rfk->rfkill); -} - -void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev) -{ - struct b43legacy_wl *wl = dev->wl; - struct b43legacy_rfkill *rfk = &(wl->rfkill); + rfk->registered = 0; + rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); + if (!rfk->rfkill) + goto out_error; snprintf(rfk->name, sizeof(rfk->name), "b43legacy-%s", wiphy_name(wl->hw->wiphy)); - - rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); - if (!rfk->rfkill) { - b43legacywarn(wl, "Failed to allocate RF-kill button\n"); - return; - } rfk->rfkill->name = rfk->name; rfk->rfkill->state = RFKILL_STATE_ON; rfk->rfkill->data = dev; @@ -170,20 +141,64 @@ void b43legacy_rfkill_alloc(struct b43le rfk->rfkill->user_claim_unsupported = 1; rfk->poll_dev = input_allocate_polled_device(); - if (rfk->poll_dev) { - rfk->poll_dev->private = dev; - rfk->poll_dev->poll = b43legacy_rfkill_poll; - rfk->poll_dev->poll_interval = 1000; /* msecs */ - } else - b43legacywarn(wl, "Failed to allocate RF-kill polldev\n"); + if (!rfk->poll_dev) + goto err_free_rfk; + rfk->poll_dev->private = dev; + rfk->poll_dev->poll = b43legacy_rfkill_poll; + rfk->poll_dev->poll_interval = 1000; /* msecs */ + + rfk->poll_dev->input->name = rfk->name; + rfk->poll_dev->input->id.bustype = BUS_HOST; + rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; + rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + + err = rfkill_register(rfk->rfkill); + if (err) + goto err_free_polldev; + +#ifdef CONFIG_RFKILL_INPUT_MODULE + /* B43legacy RF-kill isn't useful without the rfkill-input subsystem. + * Try to load the module. */ + err = request_module("rfkill-input"); + if (err) + b43legacywarn(wl, "Failed to load the rfkill-input module." + "The built-in radio LED will not work.\n"); +#endif /* CONFIG_RFKILL_INPUT */ + + err = input_register_polled_device(rfk->poll_dev); + if (err) + goto err_unreg_rfk; + + rfk->registered = 1; + + return; +err_unreg_rfk: + rfkill_unregister(rfk->rfkill); +err_free_polldev: + input_free_polled_device(rfk->poll_dev); + rfk->poll_dev = NULL; +err_free_rfk: + rfkill_free(rfk->rfkill); + rfk->rfkill = NULL; +out_error: + rfk->registered = 0; + b43legacywarn(wl, "RF-kill button init failed\n"); } -void b43legacy_rfkill_free(struct b43legacy_wldev *dev) +void b43legacy_rfkill_exit(struct b43legacy_wldev *dev) { struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); + if (!rfk->registered) + return; + rfk->registered = 0; + + input_unregister_polled_device(rfk->poll_dev); + rfkill_unregister(rfk->rfkill); input_free_polled_device(rfk->poll_dev); rfk->poll_dev = NULL; rfkill_free(rfk->rfkill); rfk->rfkill = NULL; } + Index: wireless-2.6/drivers/net/wireless/b43legacy/leds.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43legacy/leds.c +++ wireless-2.6/drivers/net/wireless/b43legacy/leds.c @@ -165,6 +165,9 @@ static void b43legacy_map_led(struct b43 b43legacy_register_led(dev, &dev->led_radio, name, b43legacy_rfkill_led_name(dev), led_index, activelow); + /* Sync the RF-kill LED state with the switch state. */ + if (dev->radio_hw_enable) + b43legacy_led_turn_on(dev, led_index, activelow); break; case B43legacy_LED_WEIRD: case B43legacy_LED_ASSOC: @@ -234,4 +237,5 @@ void b43legacy_leds_exit(struct b43legac b43legacy_unregister_led(&dev->led_tx); b43legacy_unregister_led(&dev->led_rx); b43legacy_unregister_led(&dev->led_assoc); + b43legacy_unregister_led(&dev->led_radio); } Index: wireless-2.6/drivers/net/wireless/b43legacy/main.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43legacy/main.c +++ wireless-2.6/drivers/net/wireless/b43legacy/main.c @@ -1999,7 +1999,6 @@ static void b43legacy_mgmtframe_txantenn static void b43legacy_chip_exit(struct b43legacy_wldev *dev) { b43legacy_radio_turn_off(dev, 1); - b43legacy_leds_exit(dev); b43legacy_gpio_cleanup(dev); /* firmware is released later */ } @@ -2029,11 +2028,10 @@ static int b43legacy_chip_init(struct b4 err = b43legacy_gpio_init(dev); if (err) goto out; /* firmware is released later */ - b43legacy_leds_init(dev); err = b43legacy_upload_initvals(dev); if (err) - goto err_leds_exit; + goto err_gpio_clean; b43legacy_radio_turn_on(dev); b43legacy_write16(dev, 0x03E6, 0x0000); @@ -2115,8 +2113,7 @@ out: err_radio_off: b43legacy_radio_turn_off(dev, 1); -err_leds_exit: - b43legacy_leds_exit(dev); +err_gpio_clean: b43legacy_gpio_cleanup(dev); goto out; } @@ -2973,10 +2970,7 @@ static void b43legacy_wireless_core_exit cancel_work_sync(&dev->restart_work); mutex_lock(&wl->mutex); - mutex_unlock(&dev->wl->mutex); - b43legacy_rfkill_exit(dev); - mutex_lock(&dev->wl->mutex); - + b43legacy_leds_exit(dev); b43legacy_rng_exit(dev->wl); b43legacy_pio_free(dev); b43legacy_dma_free(dev); @@ -3142,11 +3136,11 @@ static int b43legacy_wireless_core_init( memset(wl->mac_addr, 0, ETH_ALEN); b43legacy_upload_card_macaddress(dev); b43legacy_security_init(dev); - b43legacy_rfkill_init(dev); b43legacy_rng_init(wl); b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED); + b43legacy_leds_init(dev); out: return err; @@ -3235,6 +3229,10 @@ static int b43legacy_op_start(struct iee int did_init = 0; int err = 0; + /* First register RFkill. + * LEDs that are registered later depend on it. */ + b43legacy_rfkill_init(dev); + mutex_lock(&wl->mutex); if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) { @@ -3264,6 +3262,8 @@ static void b43legacy_op_stop(struct iee struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); struct b43legacy_wldev *dev = wl->current_dev; + b43legacy_rfkill_exit(dev); + mutex_lock(&wl->mutex); if (b43legacy_status(dev) >= B43legacy_STAT_STARTED) b43legacy_wireless_core_stop(dev); -- Ciao Stefano