Return-path: Received: from bay0-omc3-s28.bay0.hotmail.com ([65.54.246.228]:47457 "EHLO bay0-omc3-s28.bay0.hotmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934402AbYBNBOw convert rfc822-to-8bit (ORCPT ); Wed, 13 Feb 2008 20:14:52 -0500 Message-ID: (sfid-20080214_011505_642266_367AAAD1) From: Adam Turk To: Subject: kernel 2.6.25-rc1 and no /dev/rt73usb Date: Wed, 13 Feb 2008 20:14:50 -0500 Content-Type: text/plain; charset=iso-8859-1 MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hello, I just compiled 2.6.25-rc1 so I could use my wireless card (ID 148f:257= 3 Ralink Technology, Corp. RT2501USB Wireless Adapter). With 2.6.25-rc= 1 when I plug it in I don't get any error messages like I did with 2.6.= 24. When I plug it in I get the following in /var/log/messages: =46eb 13 19:06:31 (none) kernel: usb 1-1: new full speed USB device usi= ng ohci_hcd and address 3 =46eb 13 19:06:31 (none) kernel: usb 1-1: configuration #1 chosen from = 1 choice =46eb 13 19:06:31 (none) kernel: usb 1-1: New USB device found, idVendo= r=3D148f, idProduct=3D2573 =46eb 13 19:06:31 (none) kernel: usb 1-1: New USB device strings: Mfr=3D= 1, Product=3D2, SerialNumber=3D0 =46eb 13 19:06:31 (none) kernel: usb 1-1: Product: 802.11 bg WLAN =46eb 13 19:06:31 (none) kernel: usb 1-1: Manufacturer: Ralink =46eb 13 19:06:31 (none) kernel: phy0 -> rt2x00_set_chip: Info - Chipse= t detected - rt: 1300, rf: 0002, rev: 0002573a. =46eb 13 19:06:31 (none) kernel: usbcore: registered new interface driv= er rt73usb However no rt73usb device is created. Why isn't this working? =20 Thanks, _________________________________________________________________ Climb to the top of the charts!=A0Play the word scramble challenge with= star power. http://club.live.com/star_shuffle.aspx?icid=3Dstarshuffle_wlmailtextlin= k_jan- To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html