Return-path: Received: from wx-out-0506.google.com ([66.249.82.234]:15256 "EHLO wx-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751161AbYBVHSI (ORCPT ); Fri, 22 Feb 2008 02:18:08 -0500 Received: by wx-out-0506.google.com with SMTP id h31so290544wxd.4 for ; Thu, 21 Feb 2008 23:18:06 -0800 (PST) To: linux-wireless@vger.kernel.org From: Luis Carlos Cobo Date: Thu, 21 Feb 2008 20:07:20 -0800 Subject: [PATCH 03/13 v2] o11s: various definitions and support functions for mesh interfaces Message-ID: <47be772d.17bc720a.0288.ffffcbbc@mx.google.com> (sfid-20080222_071812_193400_EB1E9FF8) Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Luis Carlos Cobo --- include/linux/ieee80211.h | 35 +++++++++++++++++++++++++++++++++++ include/linux/wireless.h | 1 + include/net/mac80211.h | 3 +++ net/mac80211/Kconfig | 15 +++++++++++++++ net/mac80211/Makefile | 6 ++++++ net/mac80211/ieee80211.c | 31 +++++++++++++++++++++++++++++-- 6 files changed, 89 insertions(+), 2 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index f577c8f..f27d11a 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -97,6 +97,7 @@ #define IEEE80211_MAX_FRAME_LEN 2352 #define IEEE80211_MAX_SSID_LEN 32 +#define IEEE80211_MAX_MESH_ID_LEN 32 struct ieee80211_hdr { __le16 frame_control; @@ -109,6 +110,16 @@ struct ieee80211_hdr { } __attribute__ ((packed)); +struct ieee80211s_hdr { + u8 flags; + u8 ttl; + u8 seqnum[3]; + u8 eaddr1[6]; + u8 eaddr2[6]; + u8 eaddr3[6]; +} __attribute__ ((packed)); + + struct ieee80211_mgmt { __le16 frame_control; __le16 duration; @@ -206,6 +217,23 @@ struct ieee80211_mgmt { __le16 params; __le16 reason_code; } __attribute__((packed)) delba; + struct{ + u8 action_code; + /* capab_info for open and confirm, + * reason for close + */ + __le16 aux; + /* Followed in plink_confirm by status + * code, AID and supported rates, + * and directly by supported rates in + * plink_open and plink_close + */ + u8 variable[0]; + } __attribute__((packed)) plink_action; + struct{ + u8 action_code; + u8 variable[0]; + } __attribute__((packed)) mesh_action; } u; } __attribute__ ((packed)) action; } u; @@ -437,6 +465,13 @@ enum ieee80211_eid { WLAN_EID_TS_DELAY = 43, WLAN_EID_TCLAS_PROCESSING = 44, WLAN_EID_QOS_CAPA = 46, + /* 802.11s */ + WLAN_EID_MESH_CONFIG = 36, /* Pending IEEE 802.11 ANA approval */ + WLAN_EID_MESH_ID = 37, /* Pending IEEE 802.11 ANA approval */ + WLAN_EID_PEER_LINK = 40, /* Pending IEEE 802.11 ANA approval */ + WLAN_EID_PREQ = 53, /* Pending IEEE 802.11 ANA approval */ + WLAN_EID_PREP = 54, /* Pending IEEE 802.11 ANA approval */ + WLAN_EID_PERR = 55, /* Pending IEEE 802.11 ANA approval */ /* 802.11h */ WLAN_EID_PWR_CONSTRAINT = 32, WLAN_EID_PWR_CAPABILITY = 33, diff --git a/include/linux/wireless.h b/include/linux/wireless.h index 74e84ca..151f48f 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -455,6 +455,7 @@ #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ +#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ /* Statistics flags (bitmask in updated) */ #define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 460da54..d762c26 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -436,6 +436,7 @@ enum ieee80211_if_types { IEEE80211_IF_TYPE_AP, IEEE80211_IF_TYPE_STA, IEEE80211_IF_TYPE_IBSS, + IEEE80211_IF_TYPE_MESH_POINT, IEEE80211_IF_TYPE_MNTR, IEEE80211_IF_TYPE_WDS, IEEE80211_IF_TYPE_VLAN, @@ -497,6 +498,8 @@ struct ieee80211_if_init_conf { * config_interface() call, so copy the value somewhere if you need * it. * @ssid_len: length of the @ssid field. + * @mesh_id: mesh ID of the mesh network we will be part of. + * @mesh_id_len: length of the @mesh_id field. * @beacon: beacon template. Valid only if @host_gen_beacon_template in * &struct ieee80211_hw is set. The driver is responsible of freeing * the sk_buff. diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 45c7c0c..e91fd85 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -81,6 +81,14 @@ config MAC80211_RC_SIMPLE Say N unless you know what you are doing. endmenu +config MAC80211_MESH + bool "Enable mac80211 mesh networking (pre-802.11s) support" + depends on MAC80211 && EXPERIMENTAL + ---help--- + This options enables support of pre-802.11s mesh interfaces. + For more information visit http://o11s.org + + config MAC80211_LEDS bool "Enable LED triggers" depends on MAC80211 && LEDS_TRIGGERS @@ -166,3 +174,10 @@ config MAC80211_VERBOSE_PS_DEBUG ---help--- Say Y here to print out verbose powersave mode debug messages. + +config MAC80211_VERBOSE_MPL_DEBUG + bool "Verbose mesh peer link debugging" + depends on MAC80211_DEBUG && MAC80211_MESH + ---help--- + Say Y here to print out verbose mesh peer link + debug messages. diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile index 9d7a195..829ce42 100644 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -36,6 +36,12 @@ mac80211-$(CONFIG_MAC80211_DEBUGFS) += \ debugfs_netdev.o \ debugfs_key.o +mac80211-$(CONFIG_MAC80211_MESH) += \ + mesh.o \ + mesh_pathtbl.o \ + mesh_plink.o \ + mesh_hwmp.o + # Build rate control algorithm(s) CFLAGS_rc80211_simple.o += -DRC80211_SIMPLE_COMPILE diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 1a0171d..6b5a1f4 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -26,6 +26,9 @@ #include "ieee80211_i.h" #include "ieee80211_rate.h" +#ifdef CONFIG_MAC80211_MESH +#include "mesh.h" +#endif #include "wep.h" #include "wme.h" #include "aes_ccm.h" @@ -138,9 +141,15 @@ static void ieee80211_master_set_multicast_list(struct net_device *dev) static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) { + int meshhdrlen; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0; + /* FIX: what would be proper limits for MTU? * This interface uses 802.3 frames. */ - if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6) { + if (new_mtu < 256 || + new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { printk(KERN_WARNING "%s: invalid MTU %d\n", dev->name, new_mtu); return -EINVAL; @@ -214,6 +223,7 @@ static int ieee80211_open(struct net_device *dev) case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_MNTR: case IEEE80211_IF_TYPE_IBSS: + case IEEE80211_IF_TYPE_MESH_POINT: /* no special treatment */ break; case IEEE80211_IF_TYPE_INVALID: @@ -394,6 +404,9 @@ static int ieee80211_stop(struct net_device *dev) ieee80211_configure_filter(local); netif_tx_unlock_bh(local->mdev); break; + case IEEE80211_IF_TYPE_MESH_POINT: + sta_info_flush(local, dev); + /* fall through */ case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_IBSS: sdata->u.sta.state = IEEE80211_DISABLED; @@ -879,6 +892,11 @@ static int __ieee80211_if_config(struct net_device *dev, conf.bssid = sdata->u.sta.bssid; conf.ssid = sdata->u.sta.ssid; conf.ssid_len = sdata->u.sta.ssid_len; +#ifdef CONFIG_MAC80211_MESH + } else if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) { + conf.beacon = beacon; + ieee80211_start_mesh(dev); +#endif } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) { conf.ssid = sdata->u.ap.ssid; conf.ssid_len = sdata->u.ap.ssid_len; @@ -891,6 +909,11 @@ static int __ieee80211_if_config(struct net_device *dev, int ieee80211_if_config(struct net_device *dev) { + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT && + (local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE)) + return ieee80211_if_config_beacon(dev); return __ieee80211_if_config(dev, NULL, NULL); } @@ -1579,7 +1602,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) /* add one default STA interface */ result = ieee80211_if_add(local->mdev, "wlan%d", NULL, - IEEE80211_IF_TYPE_STA); + IEEE80211_IF_TYPE_STA, NULL); if (result) printk(KERN_WARNING "%s: Failed to add default virtual iface\n", wiphy_name(local->hw.wiphy)); @@ -1714,6 +1737,10 @@ static void __exit ieee80211_exit(void) rc80211_simple_exit(); rc80211_pid_exit(); +#ifdef CONFIG_MAC80211_MESH + if (mesh_allocated) + ieee80211s_stop(); +#endif ieee80211_wme_unregister(); ieee80211_debugfs_netdev_exit(); } -- 1.5.2.5