Return-path: Received: from smtp4.versatel.nl ([62.58.50.91]:34342 "EHLO smtp4.versatel.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753976AbYCWOZB (ORCPT ); Sun, 23 Mar 2008 10:25:01 -0400 Subject: Re: hostapd with mac80211 and rt2500pci: hostapd doesn't receive clients EAPOL keys unless mon.wlan1 is promiscuous From: Bas Hulsken To: linux-wireless@vger.kernel.org, Johannes Berg In-Reply-To: <1206277237.2902.37.camel@Bas> References: <1206271458.2902.27.camel@Bas> (sfid-20080323_113430_380950_98BCE00E) <1206274341.16475.185.camel@johannes.berg> <1206277237.2902.37.camel@Bas> Content-Type: text/plain Date: Sun, 23 Mar 2008 15:14:13 +0100 Message-Id: <1206281653.2902.45.camel@Bas> (sfid-20080323_142507_798343_627B957B) Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Johannes, On Sun, 2008-03-23 at 14:00 +0100, Bas Hulsken wrote: > before I blow up the system, I guess this should do the trick? > (remember, I'm not a kernel hacker ;-): ok.. so I decided to just give it a try.. seems to work, this is dmesg upon ifupping the interface: phy0: Selected rate control algorithm 'pid' Registered led device: rt2500pci-phy0:radio rt2500pci MAC changed: 00:0c:f6:14:05:19 rt2500pci filter_flags: 2 ADDRCONF(NETDEV_UP): wlan1: link is not ready when I run hostapd, this is in dmesg: rt2500pci MAC changed: 00:00:00:00:00:00 rt2500pci MAC changed: 00:0c:f6:14:05:19 rt2500pci MAC changed: 00:00:00:00:00:00 rt2500pci MAC changed: 00:0c:f6:14:05:19 rt2500pci filter_flags: 2 rt2500pci filter_flags: 0 rt2500pci MAC changed: 00:00:00:00:00:00 rt2500pci MAC changed: 00:0c:f6:14:05:19 rt2500pci filter_flags: 2 this is immediately on startup of hostapd, after that filter and MAC remain unchanged (at least if my printk catches everything). thanks, Bas