Return-path: Received: from fmmailgate03.web.de ([217.72.192.234]:34758 "EHLO fmmailgate03.web.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752183AbYDDXIA (ORCPT ); Fri, 4 Apr 2008 19:08:00 -0400 To: mcgrof@gmail.com Subject: [PATCH 2/5] p54: move p54usb - part 1 Cc: linux-wireless@vger.kernel.org, linville@tuxdriver.com, flamingice@sourmilk.net, johannes@sipsolutions.net Message-Id: (sfid-20080405_000808_019967_CDACFEFB) From: Christian Lamparter Date: Sat, 05 Apr 2008 01:07:58 +0200 Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Christian Lamparter --- drivers/net/wireless/p54/net2280.h | 452 ++++++++++++++++++ drivers/net/wireless/p54/p54usb.c | 910 ++++++++++++++++++++++++++++++++++++ drivers/net/wireless/p54/p54usb.h | 133 ++++++ 3 files changed, 1495 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/p54/net2280.h create mode 100644 drivers/net/wireless/p54/p54usb.c create mode 100644 drivers/net/wireless/p54/p54usb.h diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h new file mode 100644 index 0000000..7a9d3ac --- /dev/null +++ b/drivers/net/wireless/p54/net2280.h @@ -0,0 +1,452 @@ +#ifndef NET2280_H +#define NET2280_H +/* + * NetChip 2280 high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + */ + +/* + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/*-------------------------------------------------------------------------*/ + +/* NET2280 MEMORY MAPPED REGISTERS + * + * The register layout came from the chip documentation, and the bit + * number definitions were extracted from chip specification. + * + * Use the shift operator ('<<') to build bit masks, with readl/writel + * to access the registers through PCI. + */ + +/* main registers, BAR0 + 0x0000 */ +struct net2280_regs { + /* offset 0x0000 */ + __le32 devinit; +#define LOCAL_CLOCK_FREQUENCY 8 +#define FORCE_PCI_RESET 7 +#define PCI_ID 6 +#define PCI_ENABLE 5 +#define FIFO_SOFT_RESET 4 +#define CFG_SOFT_RESET 3 +#define PCI_SOFT_RESET 2 +#define USB_SOFT_RESET 1 +#define M8051_RESET 0 + __le32 eectl; +#define EEPROM_ADDRESS_WIDTH 23 +#define EEPROM_CHIP_SELECT_ACTIVE 22 +#define EEPROM_PRESENT 21 +#define EEPROM_VALID 20 +#define EEPROM_BUSY 19 +#define EEPROM_CHIP_SELECT_ENABLE 18 +#define EEPROM_BYTE_READ_START 17 +#define EEPROM_BYTE_WRITE_START 16 +#define EEPROM_READ_DATA 8 +#define EEPROM_WRITE_DATA 0 + __le32 eeclkfreq; + u32 _unused0; + /* offset 0x0010 */ + + __le32 pciirqenb0; /* interrupt PCI master ... */ +#define SETUP_PACKET_INTERRUPT_ENABLE 7 +#define ENDPOINT_F_INTERRUPT_ENABLE 6 +#define ENDPOINT_E_INTERRUPT_ENABLE 5 +#define ENDPOINT_D_INTERRUPT_ENABLE 4 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 + __le32 pciirqenb1; +#define PCI_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + __le32 cpu_irqenb0; /* ... or onboard 8051 */ +#define SETUP_PACKET_INTERRUPT_ENABLE 7 +#define ENDPOINT_F_INTERRUPT_ENABLE 6 +#define ENDPOINT_E_INTERRUPT_ENABLE 5 +#define ENDPOINT_D_INTERRUPT_ENABLE 4 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 + __le32 cpu_irqenb1; +#define CPU_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_INTA_INTERRUPT_ENABLE 24 +#define PCI_PME_INTERRUPT_ENABLE 23 +#define PCI_SERR_INTERRUPT_ENABLE 22 +#define PCI_PERR_INTERRUPT_ENABLE 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + + /* offset 0x0020 */ + u32 _unused1; + __le32 usbirqenb1; +#define USB_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_INTA_INTERRUPT_ENABLE 24 +#define PCI_PME_INTERRUPT_ENABLE 23 +#define PCI_SERR_INTERRUPT_ENABLE 22 +#define PCI_PERR_INTERRUPT_ENABLE 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + __le32 irqstat0; +#define INTA_ASSERTED 12 +#define SETUP_PACKET_INTERRUPT 7 +#define ENDPOINT_F_INTERRUPT 6 +#define ENDPOINT_E_INTERRUPT 5 +#define ENDPOINT_D_INTERRUPT 4 +#define ENDPOINT_C_INTERRUPT 3 +#define ENDPOINT_B_INTERRUPT 2 +#define ENDPOINT_A_INTERRUPT 1 +#define ENDPOINT_0_INTERRUPT 0 + __le32 irqstat1; +#define POWER_STATE_CHANGE_INTERRUPT 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT 26 +#define PCI_PARITY_ERROR_INTERRUPT 25 +#define PCI_INTA_INTERRUPT 24 +#define PCI_PME_INTERRUPT 23 +#define PCI_SERR_INTERRUPT 22 +#define PCI_PERR_INTERRUPT 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19 +#define PCI_RETRY_ABORT_INTERRUPT 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16 +#define GPIO_INTERRUPT 13 +#define DMA_D_INTERRUPT 12 +#define DMA_C_INTERRUPT 11 +#define DMA_B_INTERRUPT 10 +#define DMA_A_INTERRUPT 9 +#define EEPROM_DONE_INTERRUPT 8 +#define VBUS_INTERRUPT 7 +#define CONTROL_STATUS_INTERRUPT 6 +#define ROOT_PORT_RESET_INTERRUPT 4 +#define SUSPEND_REQUEST_INTERRUPT 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2 +#define RESUME_INTERRUPT 1 +#define SOF_INTERRUPT 0 + /* offset 0x0030 */ + __le32 idxaddr; + __le32 idxdata; + __le32 fifoctl; +#define PCI_BASE2_RANGE 16 +#define IGNORE_FIFO_AVAILABILITY 3 +#define PCI_BASE2_SELECT 2 +#define FIFO_CONFIGURATION_SELECT 0 + u32 _unused2; + /* offset 0x0040 */ + __le32 memaddr; +#define START 28 +#define DIRECTION 27 +#define FIFO_DIAGNOSTIC_SELECT 24 +#define MEMORY_ADDRESS 0 + __le32 memdata0; + __le32 memdata1; + u32 _unused3; + /* offset 0x0050 */ + __le32 gpioctl; +#define GPIO3_LED_SELECT 12 +#define GPIO3_INTERRUPT_ENABLE 11 +#define GPIO2_INTERRUPT_ENABLE 10 +#define GPIO1_INTERRUPT_ENABLE 9 +#define GPIO0_INTERRUPT_ENABLE 8 +#define GPIO3_OUTPUT_ENABLE 7 +#define GPIO2_OUTPUT_ENABLE 6 +#define GPIO1_OUTPUT_ENABLE 5 +#define GPIO0_OUTPUT_ENABLE 4 +#define GPIO3_DATA 3 +#define GPIO2_DATA 2 +#define GPIO1_DATA 1 +#define GPIO0_DATA 0 + __le32 gpiostat; +#define GPIO3_INTERRUPT 3 +#define GPIO2_INTERRUPT 2 +#define GPIO1_INTERRUPT 1 +#define GPIO0_INTERRUPT 0 +} __attribute__ ((packed)); + +/* usb control, BAR0 + 0x0080 */ +struct net2280_usb_regs { + /* offset 0x0080 */ + __le32 stdrsp; +#define STALL_UNSUPPORTED_REQUESTS 31 +#define SET_TEST_MODE 16 +#define GET_OTHER_SPEED_CONFIGURATION 15 +#define GET_DEVICE_QUALIFIER 14 +#define SET_ADDRESS 13 +#define ENDPOINT_SET_CLEAR_HALT 12 +#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11 +#define GET_STRING_DESCRIPTOR_2 10 +#define GET_STRING_DESCRIPTOR_1 9 +#define GET_STRING_DESCRIPTOR_0 8 +#define GET_SET_INTERFACE 6 +#define GET_SET_CONFIGURATION 5 +#define GET_CONFIGURATION_DESCRIPTOR 4 +#define GET_DEVICE_DESCRIPTOR 3 +#define GET_ENDPOINT_STATUS 2 +#define GET_INTERFACE_STATUS 1 +#define GET_DEVICE_STATUS 0 + __le32 prodvendid; +#define PRODUCT_ID 16 +#define VENDOR_ID 0 + __le32 relnum; + __le32 usbctl; +#define SERIAL_NUMBER_INDEX 16 +#define PRODUCT_ID_STRING_ENABLE 13 +#define VENDOR_ID_STRING_ENABLE 12 +#define USB_ROOT_PORT_WAKEUP_ENABLE 11 +#define VBUS_PIN 10 +#define TIMED_DISCONNECT 9 +#define SUSPEND_IMMEDIATELY 7 +#define SELF_POWERED_USB_DEVICE 6 +#define REMOTE_WAKEUP_SUPPORT 5 +#define PME_POLARITY 4 +#define USB_DETECT_ENABLE 3 +#define PME_WAKEUP_ENABLE 2 +#define DEVICE_REMOTE_WAKEUP_ENABLE 1 +#define SELF_POWERED_STATUS 0 + /* offset 0x0090 */ + __le32 usbstat; +#define HIGH_SPEED 7 +#define FULL_SPEED 6 +#define GENERATE_RESUME 5 +#define GENERATE_DEVICE_REMOTE_WAKEUP 4 + __le32 xcvrdiag; +#define FORCE_HIGH_SPEED_MODE 31 +#define FORCE_FULL_SPEED_MODE 30 +#define USB_TEST_MODE 24 +#define LINE_STATE 16 +#define TRANSCEIVER_OPERATION_MODE 2 +#define TRANSCEIVER_SELECT 1 +#define TERMINATION_SELECT 0 + __le32 setup0123; + __le32 setup4567; + /* offset 0x0090 */ + u32 _unused0; + __le32 ouraddr; +#define FORCE_IMMEDIATE 7 +#define OUR_USB_ADDRESS 0 + __le32 ourconfig; +} __attribute__ ((packed)); + +/* pci control, BAR0 + 0x0100 */ +struct net2280_pci_regs { + /* offset 0x0100 */ + __le32 pcimstctl; +#define PCI_ARBITER_PARK_SELECT 13 +#define PCI_MULTI LEVEL_ARBITER 12 +#define PCI_RETRY_ABORT_ENABLE 11 +#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10 +#define DMA_READ_MULTIPLE_ENABLE 9 +#define DMA_READ_LINE_ENABLE 8 +#define PCI_MASTER_COMMAND_SELECT 6 +#define MEM_READ_OR_WRITE 0 +#define IO_READ_OR_WRITE 1 +#define CFG_READ_OR_WRITE 2 +#define PCI_MASTER_START 5 +#define PCI_MASTER_READ_WRITE 4 +#define PCI_MASTER_WRITE 0 +#define PCI_MASTER_READ 1 +#define PCI_MASTER_BYTE_WRITE_ENABLES 0 + __le32 pcimstaddr; + __le32 pcimstdata; + __le32 pcimststat; +#define PCI_ARBITER_CLEAR 2 +#define PCI_EXTERNAL_ARBITER 1 +#define PCI_HOST_MODE 0 +} __attribute__ ((packed)); + +/* dma control, BAR0 + 0x0180 ... array of four structs like this, + * for channels 0..3. see also struct net2280_dma: descriptor + * that can be loaded into some of these registers. + */ +struct net2280_dma_regs { /* [11.7] */ + /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */ + __le32 dmactl; +#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25 +#define DMA_CLEAR_COUNT_ENABLE 21 +#define DESCRIPTOR_POLLING_RATE 19 +#define POLL_CONTINUOUS 0 +#define POLL_1_USEC 1 +#define POLL_100_USEC 2 +#define POLL_1_MSEC 3 +#define DMA_VALID_BIT_POLLING_ENABLE 18 +#define DMA_VALID_BIT_ENABLE 17 +#define DMA_SCATTER_GATHER_ENABLE 16 +#define DMA_OUT_AUTO_START_ENABLE 4 +#define DMA_PREEMPT_ENABLE 3 +#define DMA_FIFO_VALIDATE 2 +#define DMA_ENABLE 1 +#define DMA_ADDRESS_HOLD 0 + __le32 dmastat; +#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25 +#define DMA_TRANSACTION_DONE_INTERRUPT 24 +#define DMA_ABORT 1 +#define DMA_START 0 + u32 _unused0[2]; + /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */ + __le32 dmacount; +#define VALID_BIT 31 +#define DMA_DIRECTION 30 +#define DMA_DONE_INTERRUPT_ENABLE 29 +#define END_OF_CHAIN 28 +#define DMA_BYTE_COUNT_MASK ((1<<24)-1) +#define DMA_BYTE_COUNT 0 + __le32 dmaaddr; + __le32 dmadesc; + u32 _unused1; +} __attribute__ ((packed)); + +/* dedicated endpoint registers, BAR0 + 0x0200 */ + +struct net2280_dep_regs { /* [11.8] */ + /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */ + __le32 dep_cfg; + /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */ + __le32 dep_rsp; + u32 _unused[2]; +} __attribute__ ((packed)); + +/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs + * like this, for ep0 then the configurable endpoints A..F + * ep0 reserved for control; E and F have only 64 bytes of fifo + */ +struct net2280_ep_regs { /* [11.9] */ + /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */ + __le32 ep_cfg; +#define ENDPOINT_BYTE_COUNT 16 +#define ENDPOINT_ENABLE 10 +#define ENDPOINT_TYPE 8 +#define ENDPOINT_DIRECTION 7 +#define ENDPOINT_NUMBER 0 + __le32 ep_rsp; +#define SET_NAK_OUT_PACKETS 15 +#define SET_EP_HIDE_STATUS_PHASE 14 +#define SET_EP_FORCE_CRC_ERROR 13 +#define SET_INTERRUPT_MODE 12 +#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11 +#define SET_NAK_OUT_PACKETS_MODE 10 +#define SET_ENDPOINT_TOGGLE 9 +#define SET_ENDPOINT_HALT 8 +#define CLEAR_NAK_OUT_PACKETS 7 +#define CLEAR_EP_HIDE_STATUS_PHASE 6 +#define CLEAR_EP_FORCE_CRC_ERROR 5 +#define CLEAR_INTERRUPT_MODE 4 +#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3 +#define CLEAR_NAK_OUT_PACKETS_MODE 2 +#define CLEAR_ENDPOINT_TOGGLE 1 +#define CLEAR_ENDPOINT_HALT 0 + __le32 ep_irqenb; +#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5 +#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3 +#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2 +#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1 +#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0 + __le32 ep_stat; +#define FIFO_VALID_COUNT 24 +#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22 +#define TIMEOUT 21 +#define USB_STALL_SENT 20 +#define USB_IN_NAK_SENT 19 +#define USB_IN_ACK_RCVD 18 +#define USB_OUT_PING_NAK_SENT 17 +#define USB_OUT_ACK_SENT 16 +#define FIFO_OVERFLOW 13 +#define FIFO_UNDERFLOW 12 +#define FIFO_FULL 11 +#define FIFO_EMPTY 10 +#define FIFO_FLUSH 9 +#define SHORT_PACKET_OUT_DONE_INTERRUPT 6 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5 +#define NAK_OUT_PACKETS 4 +#define DATA_PACKET_RECEIVED_INTERRUPT 3 +#define DATA_PACKET_TRANSMITTED_INTERRUPT 2 +#define DATA_OUT_PING_TOKEN_INTERRUPT 1 +#define DATA_IN_TOKEN_INTERRUPT 0 + /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */ + __le32 ep_avail; + __le32 ep_data; + u32 _unused0[2]; +} __attribute__ ((packed)); + +struct net2280_reg_write { + __le16 port; + __le32 addr; + __le32 val; +} __attribute__ ((packed)); + +struct net2280_reg_read { + __le16 port; + __le32 addr; +} __attribute__ ((packed)); +#endif /* NET2280_H */ diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c new file mode 100644 index 0000000..8f690a8 --- /dev/null +++ b/drivers/net/wireless/p54/p54usb.c @@ -0,0 +1,910 @@ + +/* + * Linux device driver for USB based Prism54 + * + * Copyright (c) 2006, Michael Wu + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note , et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "p54.h" +#include "p54usb.h" + +MODULE_AUTHOR("Michael Wu "); +MODULE_DESCRIPTION("Prism54 USB wireless driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54usb"); + +static struct usb_device_id p54u_table[] __devinitdata = { + /* Version 1 devices (pci chip + net2280) */ + {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ + {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ + {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */ + {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */ + {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */ + {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */ + {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ + {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ + {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ + {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ + {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ + {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ + {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ + {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ + {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ + {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ + + /* Version 2 devices (3887) */ + {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ + {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ + {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ + {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/ + {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ + {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */ + {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ + {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ + {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ + {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ + {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ + {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ + {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ + {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ + {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ + {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ + {} +}; + +MODULE_DEVICE_TABLE(usb, p54u_table); + +static void p54u_rx_cb(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *) urb->context; + struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb; + struct ieee80211_hw *dev = info->dev; + struct p54u_priv *priv = dev->priv; + + if (unlikely(urb->status)) { + info->urb = NULL; + usb_free_urb(urb); + return; + } + + skb_unlink(skb, &priv->rx_queue); + skb_put(skb, urb->actual_length); + if (!priv->hw_type) + skb_pull(skb, sizeof(struct net2280_tx_hdr)); + + if (p54_rx(dev, skb)) { + skb = dev_alloc_skb(MAX_RX_SIZE); + if (unlikely(!skb)) { + usb_free_urb(urb); + /* TODO check rx queue length and refill *somewhere* */ + return; + } + + info = (struct p54u_rx_info *) skb->cb; + info->urb = urb; + info->dev = dev; + urb->transfer_buffer = skb_tail_pointer(skb); + urb->context = skb; + skb_queue_tail(&priv->rx_queue, skb); + } else { + skb_trim(skb, 0); + skb_queue_tail(&priv->rx_queue, skb); + } + + usb_submit_urb(urb, GFP_ATOMIC); +} + +static void p54u_tx_cb(struct urb *urb) +{ + usb_free_urb(urb); +} + +static void p54u_tx_free_cb(struct urb *urb) +{ + kfree(urb->transfer_buffer); + usb_free_urb(urb); +} + +static int p54u_init_urbs(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + struct urb *entry; + struct sk_buff *skb; + struct p54u_rx_info *info; + + while (skb_queue_len(&priv->rx_queue) < 32) { + skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL); + if (!skb) + break; + entry = usb_alloc_urb(0, GFP_KERNEL); + if (!entry) { + kfree_skb(skb); + break; + } + usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb); + info = (struct p54u_rx_info *) skb->cb; + info->urb = entry; + info->dev = dev; + skb_queue_tail(&priv->rx_queue, skb); + usb_submit_urb(entry, GFP_KERNEL); + } + + return 0; +} + +static void p54u_free_urbs(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + struct p54u_rx_info *info; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&priv->rx_queue))) { + info = (struct p54u_rx_info *) skb->cb; + if (!info->urb) + continue; + + usb_kill_urb(info->urb); + kfree_skb(skb); + } +} + +static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54u_priv *priv = dev->priv; + struct urb *addr_urb, *data_urb; + + addr_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!addr_urb) + return; + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) { + usb_free_urb(addr_urb); + return; + } + + usb_fill_bulk_urb(addr_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), &data->req_id, + sizeof(data->req_id), p54u_tx_cb, dev); + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), data, len, + free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev); + + usb_submit_urb(addr_urb, GFP_ATOMIC); + usb_submit_urb(data_urb, GFP_ATOMIC); +} + +static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54u_priv *priv = dev->priv; + struct urb *int_urb, *data_urb; + struct net2280_tx_hdr *hdr; + struct net2280_reg_write *reg; + + reg = kmalloc(sizeof(*reg), GFP_ATOMIC); + if (!reg) + return; + + int_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!int_urb) { + kfree(reg); + return; + } + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) { + kfree(reg); + usb_free_urb(int_urb); + return; + } + + reg->port = cpu_to_le16(NET2280_DEV_U32); + reg->addr = cpu_to_le32(P54U_DEV_BASE); + reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); + + len += sizeof(*data); + hdr = (void *)data - sizeof(*hdr); + memset(hdr, 0, sizeof(*hdr)); + hdr->device_addr = data->req_id; + hdr->len = cpu_to_le16(len); + + usb_fill_bulk_urb(int_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), + p54u_tx_free_cb, dev); + usb_submit_urb(int_urb, GFP_ATOMIC); + + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, len + sizeof(*hdr), + free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev); + usb_submit_urb(data_urb, GFP_ATOMIC); +} + +static int p54u_write(struct p54u_priv *priv, + struct net2280_reg_write *buf, + enum net2280_op_type type, + __le32 addr, __le32 val) +{ + unsigned int ep; + int alen; + + if (type & 0x0800) + ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV); + else + ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG); + + buf->port = cpu_to_le16(type); + buf->addr = addr; + buf->val = val; + + return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000); +} + +static int p54u_read(struct p54u_priv *priv, void *buf, + enum net2280_op_type type, + __le32 addr, __le32 *val) +{ + struct net2280_reg_read *read = buf; + __le32 *reg = buf; + unsigned int ep; + int alen, err; + + if (type & 0x0800) + ep = P54U_PIPE_DEV; + else + ep = P54U_PIPE_BRG; + + read->port = cpu_to_le16(type); + read->addr = addr; + + err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), + read, sizeof(*read), &alen, 1000); + if (err) + return err; + + err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep), + reg, sizeof(*reg), &alen, 1000); + if (err) + return err; + + *val = *reg; + return 0; +} + +static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, + void *data, size_t len) +{ + int alen; + return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), + data, len, &alen, 2000); +} + +static int p54u_read_eeprom(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + void *buf; + struct p54_control_hdr *hdr; + int err, alen; + size_t offset = priv->hw_type ? 0x10 : 0x20; + + buf = kmalloc(0x2020, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "prism54usb: cannot allocate memory for " + "eeprom readback!\n"); + return -ENOMEM; + } + + if (priv->hw_type) { + *((u32 *) buf) = priv->common.rx_start; + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); + if (err) { + printk(KERN_ERR "prism54usb: addr send failed\n"); + goto fail; + } + } else { + struct net2280_reg_write *reg = buf; + reg->port = cpu_to_le16(NET2280_DEV_U32); + reg->addr = cpu_to_le32(P54U_DEV_BASE); + reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); + err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg)); + if (err) { + printk(KERN_ERR "prism54usb: dev_int send failed\n"); + goto fail; + } + } + + hdr = buf + priv->common.tx_hdr_len; + p54_fill_eeprom_readback(hdr); + hdr->req_id = cpu_to_le32(priv->common.rx_start); + if (priv->common.tx_hdr_len) { + struct net2280_tx_hdr *tx_hdr = buf; + tx_hdr->device_addr = hdr->req_id; + tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN); + } + + /* we can just pretend to send 0x2000 bytes of nothing in the headers */ + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, + EEPROM_READBACK_LEN + priv->common.tx_hdr_len); + if (err) { + printk(KERN_ERR "prism54usb: eeprom req send failed\n"); + goto fail; + } + + err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), + buf, 0x2020, &alen, 1000); + if (!err && alen > offset) { + p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset); + } else { + printk(KERN_ERR "prism54usb: eeprom read failed!\n"); + err = -EINVAL; + goto fail; + } + + fail: + kfree(buf); + return err; +} + +static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) +{ + static char start_string[] = "~~~~<\r"; + struct p54u_priv *priv = dev->priv; + const struct firmware *fw_entry = NULL; + int err, alen; + u8 carry = 0; + u8 *buf, *tmp, *data; + unsigned int left, remains, block_size; + struct x2_header *hdr; + unsigned long timeout; + + tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "p54usb: cannot allocate firmware upload buffer!\n"); + err = -ENOMEM; + goto err_bufalloc; + } + + memcpy(buf, start_string, 4); + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 4); + if (err) { + printk(KERN_ERR "p54usb: reset failed! (%d)\n", err); + goto err_reset; + } + + err = request_firmware(&fw_entry, "isl3887usb_bare", &priv->udev->dev); + if (err) { + printk(KERN_ERR "p54usb: cannot find firmware (isl3887usb_bare)!\n"); + goto err_req_fw_failed; + } + + p54_parse_firmware(dev, fw_entry); + + left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size); + strcpy(buf, start_string); + left -= strlen(start_string); + tmp += strlen(start_string); + + data = fw_entry->data; + remains = fw_entry->size; + + hdr = (struct x2_header *)(buf + strlen(start_string)); + memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); + hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); + hdr->fw_length = cpu_to_le32(fw_entry->size); + hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, + sizeof(u32)*2)); + left -= sizeof(*hdr); + tmp += sizeof(*hdr); + + while (remains) { + while (left--) { + if (carry) { + *tmp++ = carry; + carry = 0; + remains--; + continue; + } + switch (*data) { + case '~': + *tmp++ = '}'; + carry = '^'; + break; + case '}': + *tmp++ = '}'; + carry = ']'; + break; + default: + *tmp++ = *data; + remains--; + break; + } + data++; + } + + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); + if (err) { + printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + goto err_upload_failed; + } + + tmp = buf; + left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); + } + + *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size)); + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); + if (err) { + printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + goto err_upload_failed; + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { + if (alen > 2 && !memcmp(buf, "OK", 2)) + break; + + if (alen > 5 && !memcmp(buf, "ERROR", 5)) { + printk(KERN_INFO "prism54usb: firmware upload failed!\n"); + err = -EINVAL; + break; + } + + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "prism54usb: firmware boot timed out!\n"); + err = -ETIMEDOUT; + break; + } + } + if (err) + goto err_upload_failed; + + buf[0] = 'g'; + buf[1] = '\r'; + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); + if (err) { + printk(KERN_ERR "prism54usb: firmware boot failed!\n"); + goto err_upload_failed; + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { + if (alen > 0 && buf[0] == 'g') + break; + + if (time_after(jiffies, timeout)) { + err = -ETIMEDOUT; + break; + } + } + if (err) + goto err_upload_failed; + + err_upload_failed: + release_firmware(fw_entry); + err_req_fw_failed: + err_reset: + kfree(buf); + err_bufalloc: + return err; +} + +static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + const struct firmware *fw_entry = NULL; + const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; + int err, alen; + void *buf; + __le32 reg; + unsigned int remains, offset; + u8 *data; + + buf = kmalloc(512, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "p54usb: firmware buffer alloc failed!\n"); + return -ENOMEM; + } + + err = request_firmware(&fw_entry, "isl3890usb", &priv->udev->dev); + if (err) { + printk(KERN_ERR "p54usb: cannot find firmware (isl3890usb)!\n"); + kfree(buf); + return err; + } + + p54_parse_firmware(dev, fw_entry); + +#define P54U_WRITE(type, addr, data) \ + do {\ + err = p54u_write(priv, buf, type,\ + cpu_to_le32((u32)(unsigned long)addr), data);\ + if (err) \ + goto fail;\ + } while (0) + +#define P54U_READ(type, addr) \ + do {\ + err = p54u_read(priv, buf, type,\ + cpu_to_le32((u32)(unsigned long)addr), ®);\ + if (err)\ + goto fail;\ + } while (0) + + /* power down net2280 bridge */ + P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL); + reg |= cpu_to_le32(P54U_BRG_POWER_DOWN); + reg &= cpu_to_le32(~P54U_BRG_POWER_UP); + P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); + + mdelay(100); + + /* power up bridge */ + reg |= cpu_to_le32(P54U_BRG_POWER_UP); + reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN); + P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); + + mdelay(100); + + P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT, + cpu_to_le32(NET2280_CLK_30Mhz | + NET2280_PCI_ENABLE | + NET2280_PCI_SOFT_RESET)); + + mdelay(20); + + P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND, + cpu_to_le32(PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER)); + + P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0, + cpu_to_le32(NET2280_BASE)); + + P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS); + reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT); + P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg); + + /* TODO: we really need this? */ + P54U_READ(NET2280_BRG_U32, NET2280_RELNUM); + + P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP, + cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); + P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP, + cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); + + P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2, + cpu_to_le32(NET2280_BASE2)); + + /* finally done setting up the bridge */ + + P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND, + cpu_to_le32(PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER)); + + P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0); + P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0, + cpu_to_le32(P54U_DEV_BASE)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + + /* do romboot */ + P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0); + + P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(100); + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + /* finally, we can upload firmware now! */ + remains = fw_entry->size; + data = fw_entry->data; + offset = ISL38XX_DEV_FIRMWARE_ADDR; + + while (remains) { + unsigned int block_len = min(remains, (unsigned int)512); + memcpy(buf, data, block_len); + + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); + if (err) { + printk(KERN_ERR "prism54usb: firmware block upload " + "failed\n"); + goto fail; + } + + P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base, + cpu_to_le32(0xc0000f00)); + + P54U_WRITE(NET2280_DEV_U32, + 0x0020 | (unsigned long)&devreg->direct_mem_win, 0); + P54U_WRITE(NET2280_DEV_U32, + 0x0020 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(1)); + + P54U_WRITE(NET2280_DEV_U32, + 0x0024 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(block_len)); + P54U_WRITE(NET2280_DEV_U32, + 0x0028 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(offset)); + + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr, + cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR)); + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len, + cpu_to_le32(block_len >> 2)); + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl, + cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER)); + + mdelay(10); + + P54U_READ(NET2280_DEV_U32, + 0x002C | (unsigned long)&devreg->direct_mem_win); + if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || + !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { + printk(KERN_ERR "prism54usb: firmware DMA transfer " + "failed\n"); + goto fail; + } + + P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT, + cpu_to_le32(NET2280_FIFO_FLUSH)); + + remains -= block_len; + data += block_len; + offset += block_len; + } + + /* do ramboot */ + P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(100); + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + /* start up the firmware */ + P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, + cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE | + NET2280_USB_INTERRUPT_ENABLE)); + + P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int, + cpu_to_le32(ISL38XX_DEV_INT_RESET)); + + err = usb_interrupt_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), + buf, sizeof(__le32), &alen, 1000); + if (err || alen != sizeof(__le32)) + goto fail; + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) + err = -EINVAL; + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + +#undef P54U_WRITE +#undef P54U_READ + + fail: + release_firmware(fw_entry); + kfree(buf); + return err; +} + +static int p54u_open(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + int err; + + err = p54u_init_urbs(dev); + if (err) { + return err; + } + + priv->common.open = p54u_init_urbs; + + return 0; +} + +static void p54u_stop(struct ieee80211_hw *dev) +{ + /* TODO: figure out how to reliably stop the 3887 and net2280 so + the hardware is still usable next time we want to start it. + until then, we just stop listening to the hardware.. */ + p54u_free_urbs(dev); + return; +} + +static int __devinit p54u_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct ieee80211_hw *dev; + struct p54u_priv *priv; + int err; + unsigned int i, recognized_pipes; + DECLARE_MAC_BUF(mac); + + dev = p54_init_common(sizeof(*priv)); + if (!dev) { + printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n"); + return -ENOMEM; + } + + priv = dev->priv; + + SET_IEEE80211_DEV(dev, &intf->dev); + usb_set_intfdata(intf, dev); + priv->udev = udev; + + usb_get_dev(udev); + + /* really lazy and simple way of figuring out if we're a 3887 */ + /* TODO: should just stick the identification in the device table */ + i = intf->altsetting->desc.bNumEndpoints; + recognized_pipes = 0; + while (i--) { + switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) { + case P54U_PIPE_DATA: + case P54U_PIPE_MGMT: + case P54U_PIPE_BRG: + case P54U_PIPE_DEV: + case P54U_PIPE_DATA | USB_DIR_IN: + case P54U_PIPE_MGMT | USB_DIR_IN: + case P54U_PIPE_BRG | USB_DIR_IN: + case P54U_PIPE_DEV | USB_DIR_IN: + case P54U_PIPE_INT | USB_DIR_IN: + recognized_pipes++; + } + } + priv->common.open = p54u_open; + + if (recognized_pipes < P54U_PIPE_NUMBER) { + priv->hw_type = P54U_3887; + priv->common.tx = p54u_tx_3887; + } else { + dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); + priv->common.tx = p54u_tx_net2280; + } + priv->common.stop = p54u_stop; + + if (priv->hw_type) + err = p54u_upload_firmware_3887(dev); + else + err = p54u_upload_firmware_net2280(dev); + if (err) + goto err_free_dev; + + err = p54u_read_eeprom(dev); + if (err) + goto err_free_dev; + + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + u8 perm_addr[ETH_ALEN]; + + printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n"); + random_ether_addr(perm_addr); + SET_IEEE80211_PERM_ADDR(dev, perm_addr); + } + + skb_queue_head_init(&priv->rx_queue); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "prism54usb: Cannot register netdevice\n"); + goto err_free_dev; + } + + printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", + wiphy_name(dev->wiphy), + print_mac(mac, dev->wiphy->perm_addr), + priv->common.version); + + return 0; + + err_free_dev: + ieee80211_free_hw(dev); + usb_set_intfdata(intf, NULL); + usb_put_dev(udev); + return err; +} + +static void __devexit p54u_disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + usb_put_dev(interface_to_usbdev(intf)); + p54_free_common(dev); + ieee80211_free_hw(dev); +} + +static struct usb_driver p54u_driver = { + .name = "prism54usb", + .id_table = p54u_table, + .probe = p54u_probe, + .disconnect = p54u_disconnect, +}; + +static int __init p54u_init(void) +{ + return usb_register(&p54u_driver); +} + +static void __exit p54u_exit(void) +{ + usb_deregister(&p54u_driver); +} + +module_init(p54u_init); +module_exit(p54u_exit); diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h new file mode 100644 index 0000000..e31074e --- /dev/null +++ b/drivers/net/wireless/p54/p54usb.h @@ -0,0 +1,133 @@ +#ifndef PRISM54USB_H +#define PRISM54USB_H + +/* + * Defines for USB based mac80211 Prism54 driver + * + * Copyright (c) 2006, Michael Wu + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note , et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* for isl3886 register definitions used on ver 1 devices */ +#include "p54pci.h" +#include "net2280.h" + +/* pci */ +#define NET2280_BASE 0x10000000 +#define NET2280_BASE2 0x20000000 + +/* gpio */ +#define P54U_BRG_POWER_UP (1 << GPIO0_DATA) +#define P54U_BRG_POWER_DOWN (1 << GPIO1_DATA) + +/* devinit */ +#define NET2280_CLK_4Mhz (15 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_30Mhz (2 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_60Mhz (1 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_STOP (0 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_PCI_ENABLE (1 << PCI_ENABLE) +#define NET2280_PCI_SOFT_RESET (1 << PCI_SOFT_RESET) + +/* endpoints */ +#define NET2280_CLEAR_NAK_OUT_PACKETS_MODE (1 << CLEAR_NAK_OUT_PACKETS_MODE) +#define NET2280_FIFO_FLUSH (1 << FIFO_FLUSH) + +/* irq */ +#define NET2280_USB_INTERRUPT_ENABLE (1 << USB_INTERRUPT_ENABLE) +#define NET2280_PCI_INTA_INTERRUPT (1 << PCI_INTA_INTERRUPT) +#define NET2280_PCI_INTA_INTERRUPT_ENABLE (1 << PCI_INTA_INTERRUPT_ENABLE) + +/* registers */ +#define NET2280_DEVINIT 0x00 +#define NET2280_USBIRQENB1 0x24 +#define NET2280_IRQSTAT1 0x2c +#define NET2280_FIFOCTL 0x38 +#define NET2280_GPIOCTL 0x50 +#define NET2280_RELNUM 0x88 +#define NET2280_EPA_RSP 0x324 +#define NET2280_EPA_STAT 0x32c +#define NET2280_EPB_STAT 0x34c +#define NET2280_EPC_RSP 0x364 +#define NET2280_EPC_STAT 0x36c +#define NET2280_EPD_STAT 0x38c + +#define NET2280_EPA_CFG 0x320 +#define NET2280_EPB_CFG 0x340 +#define NET2280_EPC_CFG 0x360 +#define NET2280_EPD_CFG 0x380 +#define NET2280_EPE_CFG 0x3A0 +#define NET2280_EPF_CFG 0x3C0 +#define P54U_DEV_BASE 0x40000000 + +struct net2280_tx_hdr { + __le32 device_addr; + __le16 len; + __le16 follower; /* ? */ + u8 padding[8]; +} __attribute__((packed)); + +/* Some flags for the isl hardware registers controlling DMA inside the + * chip */ +#define ISL38XX_DMA_STATUS_DONE 0x00000001 +#define ISL38XX_DMA_STATUS_READY 0x00000002 +#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000 +#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004 + +enum net2280_op_type { + NET2280_BRG_U32 = 0x001F, + NET2280_BRG_CFG_U32 = 0x000F, + NET2280_BRG_CFG_U16 = 0x0003, + NET2280_DEV_U32 = 0x080F, + NET2280_DEV_CFG_U32 = 0x088F, + NET2280_DEV_CFG_U16 = 0x0883 +}; + +#define P54U_FW_BLOCK 2048 + +#define X2_SIGNATURE "x2 " +#define X2_SIGNATURE_SIZE 4 + +struct x2_header { + u8 signature[X2_SIGNATURE_SIZE]; + __le32 fw_load_addr; + __le32 fw_length; + __le32 crc; +} __attribute__((packed)); + +/* pipes 3 and 4 are not used by the driver */ +#define P54U_PIPE_NUMBER 9 + +enum p54u_pipe_addr { + P54U_PIPE_DATA = 0x01, + P54U_PIPE_MGMT = 0x02, + P54U_PIPE_3 = 0x03, + P54U_PIPE_4 = 0x04, + P54U_PIPE_BRG = 0x0d, + P54U_PIPE_DEV = 0x0e, + P54U_PIPE_INT = 0x0f +}; + +struct p54u_rx_info { + struct urb *urb; + struct ieee80211_hw *dev; +}; + +struct p54u_priv { + struct p54_common common; + struct usb_device *udev; + enum { + P54U_NET2280 = 0, + P54U_3887 + } hw_type; + + spinlock_t lock; + struct sk_buff_head rx_queue; +}; + +#endif /* PRISM54USB_H */ -- 1.5.4.5