Return-path: Received: from zoltar.telenet-ops.be ([195.130.132.57]:37664 "EHLO zoltar.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754414AbYGBUbQ (ORCPT ); Wed, 2 Jul 2008 16:31:16 -0400 Message-ID: <486BE592.6040006@yahoo.co.uk> (sfid-20080702_223123_664190_3200A158) Date: Wed, 02 Jul 2008 22:31:14 +0200 From: Ivo Couckuyt MIME-Version: 1.0 To: Chr CC: linux-wireless@vger.kernel.org Subject: Re: PROBLEM: p54usb doesn't work with my Philips CPWUA054 usb adapter References: <486BB5D4.4010701@yahoo.co.uk> <200807021926.29266.chunkeey@web.de> In-Reply-To: <200807021926.29266.chunkeey@web.de> Content-Type: multipart/mixed; boundary="------------080201020101000602020603" Sender: linux-wireless-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------080201020101000602020603 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Chr wrote: > On Wednesday 02 July 2008 19:07:32 Ivo Couckuyt wrote: > >> sent this a while ago, but might be filtered due to attachment (removed >> now): >> >> i tried the following firmwares: >> 2.4.4.0.arm 2.4.6.0.arm >> 2.5.11.0.arm 2.5.6.0.arm 2.5.2.0.arm 2.7.0.0.arm >> All give the same dmesg output, (HC died; cleaning up) >> except 2.5.8.0.arm which gives something else, probably not worth much, >> but nevertheless see attachment >> >> In the very beginning I used ndiswrapper without any problem (still >> works now), but at the moment i'm using the old islsm driver together >> with kernel 2.6.9 and firmware 2.5.6.0 (only one that works), which >> doesn't seem to be on the site you mentioned >> md5sum: >> 6ff238179cf9618aac2b5d7a34e41450 2.5.6.0.arm (is included for what it >> is worth) >> > > No, your post didn't get lost... > > however I don't know what's wrong with it, as my USB device is > probably ?still? sitting in the custom office.. *sigh*. And even then, > when I'll finally get it... It probably differs alot from yours. > > However... the p54 code has sometimes some timing problems, > that islsm didn't have?! so what happends have you add some > delays inside the the initialization/probe code? > Added several delays (mdelay(200) )in the probe and/or init code didn't change a thing (except that it takes longer before it gets to the part where it errors :-) ). I also added some prints to narrow it down (tedious work, have to restart everytime i make a change). dmesg log is attached (ILM: statements were added). snippet of changed code where it seems to fail, it is in p54usc.c function p54u_upload_firmware_net2280: ... printk(KERN_INFO "ILM: usb_interrupt...\n" ); err = usb_interrupt_msg(priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), buf, sizeof(__le32), &alen, 1000); printk(KERN_INFO "ILM: call finished (error %i) (sizeof(__le32)=%i=%i)...\n", err, sizeof(__le32), alen ); if (err || alen != sizeof(__le32)) goto fail; mdelay(200); P54U_READ(NET2280_DEV_U32, &devreg->int_ident); P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) err = -EINVAL; printk(KERN_INFO "ILM: some read/acks: error %i", err ); P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); printk(KERN_INFO "ILM: startup firmware OK\n" ); ... so the usb_interrupt thing might be related somehow (causes the HC failed), or it is just that the usb stick should send 'keep-alive' irq's but doesn't because initialization before that has actually failed ? (don't know anything about kernel dev, just guessing here). so the P54U_READ(NET2280_DEV_U32, &devreg->int_ident); P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); causes the actually 'goto fail'. > (BTW: do you have a "lsusb -v" of the wlan stick somewhere?) > sure, attached. > Regards, > Christian > > --------------080201020101000602020603 Content-Type: text/plain; name="lsusb.out" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lsusb.out" Bus 001 Device 002: ID 083a:5501 Accton Technology Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x083a Accton Technology Corp. idProduct 0x5501 bcdDevice 2.02 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 95 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 11 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8d EP 13 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0d EP 13 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0e EP 14 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8f EP 15 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled --------------080201020101000602020603 Content-Type: text/plain; name="2.6.25_debug.dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="2.6.25_debug.dmesg" 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. Entering add_active_range(0, 0, 229376) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 229376 On node 0 totalpages: 229376 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.2 present. ACPI: RSDP 000F75C0, 0014 (r0 Nvidia) ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 3FFF30C0, 43E7 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 3FFF0000, 0040 ACPI: APIC 3FFF74C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584 Kernel command line: root=/dev/hdb3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1830.012 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 904820k/917504k available (2894k kernel code, 12196k reserved, 943k data, 196k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff6000 - 0xfffff000 ( 36 kB) vmalloc : 0xf8800000 - 0xffff4000 ( 119 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04c2000 - 0xc04f3000 ( 196 kB) .data : 0xc03d3a36 - 0xc04bf918 ( 943 kB) .text : 0xc0100000 - 0xc03d3a36 (2894 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 3663.11 BogoMIPS (lpj=7326232) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Athlon(tm) XP 2500+ stepping 00 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0820) net_namespace: 440 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report system 00:00: ioport range 0x4000-0x407f has been reserved system 00:00: ioport range 0x4080-0x40ff has been reserved system 00:00: ioport range 0x4400-0x447f has been reserved system 00:00: ioport range 0x4480-0x44ff has been reserved system 00:00: ioport range 0x4200-0x427f has been reserved system 00:00: ioport range 0x4280-0x42ff has been reserved system 00:01: ioport range 0x5000-0x503f has been reserved system 00:01: ioport range 0x5500-0x553f has been reserved system 00:02: iomem range 0xd1800-0xd3fff has been reserved system 00:02: iomem range 0xf0000-0xf7fff could not be reserved system 00:02: iomem range 0xf8000-0xfbfff could not be reserved system 00:02: iomem range 0xfc000-0xfffff could not be reserved system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved system 00:02: iomem range 0x0-0x9ffff could not be reserved system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved PCI: Bridge: 0000:00:08.0 IO window: 9000-9fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: a000-afff MEM window: 0xe4000000-0xe5ffffff PREFETCH window: 0x00000000c0000000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:08.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1215036259.316:1): initialized NTFS driver 2.1.29 [Flags: R/O]. io scheduler noop registered (default) pci 0000:02:00.0: Boot video device lp: driver loaded but no devices found input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: ACPI0007:00 is registered as cooling_device0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at PCI slot 0000:00:09.0 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6Y080L0, ATA DISK drive hdb: ST340016A, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/133 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/100 mode selected Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 < hda5 > hdb: max request size: 128KiB hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63 hdb: cache flushes not supported hdb: hdb1 hdb2 hdb3 hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache Driver 'sd' needs updating - please use bus_type methods ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: irq 11, io mem 0xe6000000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 11, io mem 0xe6004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 5, io mem 0xe6005000 hub 1-0:1.0: unable to enumerate USB device on port 4 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using ohci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 i2c /dev entries driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500 input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 scsi 0:0:0:0: Direct-Access Maxtor 6 L200P0 0000 PQ: 0 ANSI: 0 sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk usb-storage: device scan complete drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed drivers/hid/usbhid/hid-core.c: timeout initializing reports input: Logitech Inc. WingMan Extreme Digital 3D as /class/input/input4 input: USB HID v1.00 Joystick [Logitech Inc. WingMan Extreme Digital 3D] on usb-0000:00:02.1-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 196k freed Linux agpgart interface v0.103 agpgart: Detected NVIDIA nForce2 chipset agpgart: AGP aperture is 64M @ 0xe0000000 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:04.0 to 64 forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0c:6e:2b:95:8f forcedeth 0000:00:04.0: timirq lnktim desc-v1 EXT3 FS on hdb3, internal journal NTFS volume version 3.1. eth0: no link during initialization. Adding 500464k swap on /dev/hdb2. Priority:-1 extents:1 across:500464k usb 1-1: new high speed USB device using ehci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice ILM: net2280 uploading... p54: LM86 firmware p54: FW rev 2.5.6.0 - Softmac protocol 3.0 ILM: request_firmware + parse_firmware OK ILM: power up bridge OK ILM: still OK ILM: bridge setup OK ILM: boot device OK ILM: upload firmware OK ILM: ramboot OK ILM: usb_interrupt... ehci_hcd 0000:00:02.2: HC died; cleaning up usb 1-1: USB disconnect, address 4 ILM: call finished (error 0) (sizeof(__le32)=4=4)... ILM: done uploading (error -19) usb 1-5: USB disconnect, address 3 usbcore: registered new interface driver prism54usb --------------080201020101000602020603--