Return-path: Received: from out1.smtp.messagingengine.com ([66.111.4.25]:59882 "EHLO out1.smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754848AbYHZO6J (ORCPT ); Tue, 26 Aug 2008 10:58:09 -0400 From: Henrique de Moraes Holschuh To: John Linville Cc: linux-wireless@vger.kernel.org, Ivo van Doorn , Henrique de Moraes Holschuh , Ivo van Doorn , Matthew Garrett , Andrew Bird , Greg Kroah-Hartman , Cezary Jackiewicz , Philip Langdale Subject: [PATCH 5/5] rfkill: remove transmitter blocking on suspend Date: Tue, 26 Aug 2008 11:58:01 -0300 Message-Id: <1219762681-26911-6-git-send-email-hmh@hmh.eng.br> (sfid-20080826_165819_293820_AC12167D) In-Reply-To: <1219762681-26911-1-git-send-email-hmh@hmh.eng.br> References: <1219762681-26911-1-git-send-email-hmh@hmh.eng.br> Sender: linux-wireless-owner@vger.kernel.org List-ID: Currently, rfkill would stand in the way of properly supporting wireless devices that are capable of waking the system up from sleep or hibernation when they receive a special wireless message. It would also get in the way of mesh devices that need to remain operational even during platform suspend. To avoid that, stop trying to block the transmitters on the rfkill class suspend handler. Drivers that need rfkill's older behaviour will have to implement it by themselves in their own suspend handling. Do note that rfkill *will* attempt to restore the transmitter state on resume in any situation. This happens after the driver's resume method is called by the suspend core (class devices resume after the devices they are attached to have been resumed). The following drivers need to check if they need to explicitly block their transmitters in their own suspend handlers (maintainers Cc'd): arch/arm/mach-pxa/tosa-bt.c drivers/net/usb/hso.c drivers/net/wireless/rt2x00/* (USB might need it?) drivers/net/wireless/b43/ (SSB over USB might need it?) drivers/misc/hp-wmi.c eeepc-laptop w/rfkill support (not in mainline yet) Compal laptop w/rfkill support (not in mainline yet) toshiba-acpi w/rfkill support (not in mainline yet) Signed-off-by: Henrique de Moraes Holschuh Cc: Ivo van Doorn Cc: Matthew Garrett Cc: Andrew Bird Cc: Greg Kroah-Hartman Cc: Cezary Jackiewicz Cc: Philip Langdale --- Documentation/rfkill.txt | 32 ++++++++++++++++++++++++++++---- net/rfkill/rfkill.c | 16 ++-------------- 2 files changed, 30 insertions(+), 18 deletions(-) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 6fcb306..b65f079 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -341,6 +341,8 @@ key that does nothing by itself, as well as any hot key that is type-specific 3.1 Guidelines for wireless device drivers ------------------------------------------ +(in this text, rfkill->foo means the foo field of struct rfkill). + 1. Each independent transmitter in a wireless device (usually there is only one transmitter per device) should have a SINGLE rfkill class attached to it. @@ -363,10 +365,32 @@ This rule exists because users of the rfkill subsystem expect to get (and set, when possible) the overall transmitter rfkill state, not of a particular rfkill line. -5. During suspend, the rfkill class will attempt to soft-block the radio -through a call to rfkill->toggle_radio, and will try to restore its previous -state during resume. After a rfkill class is suspended, it will *not* call -rfkill->toggle_radio until it is resumed. +5. The wireless device driver MUST NOT leave the transmitter enabled during +suspend and hibernation unless: + + 5.1. The transmitter has to be enabled for some sort of functionality + like wake-on-wireless-packet or autonomous packed forwarding in a mesh + network, and that functionality is enabled for this suspend/hibernation + cycle. + +AND + + 5.2. The device was not on a user-requested BLOCKED state before + the suspend (i.e. the driver must NOT unblock a device, not even + to support wake-on-wireless-packet or remain in the mesh). + +In other words, there is absolutely no allowed scenario where a driver can +automatically take action to unblock a rfkill controller (obviously, this deals +with scenarios where soft-blocking or both soft and hard blocking is happening. +Scenarios where hardware rfkill lines are the only ones blocking the +transmitter are outside of this rule, since the wireless device driver does not +control its input hardware rfkill lines in the first place). + +6. During resume, rfkill will try to restore its previous state. + +7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio +until it is resumed. + Example of a WLAN wireless driver connected to the rfkill subsystem: -------------------------------------------------------------------- diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index d573579..ea0dc04 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -512,21 +512,9 @@ static void rfkill_release(struct device *dev) #ifdef CONFIG_PM static int rfkill_suspend(struct device *dev, pm_message_t state) { - struct rfkill *rfkill = to_rfkill(dev); - - if (dev->power.power_state.event != state.event) { - if (state.event & PM_EVENT_SLEEP) { - /* Stop transmitter, keep state, no notifies */ - update_rfkill_state(rfkill); - - mutex_lock(&rfkill->mutex); - rfkill->toggle_radio(rfkill->data, - RFKILL_STATE_SOFT_BLOCKED); - mutex_unlock(&rfkill->mutex); - } - + /* mark class device as suspended */ + if (dev->power.power_state.event != state.event) dev->power.power_state = state; - } return 0; } -- 1.5.6.3