Message-ID: <43e72e890808080949l1ee7a392m784fe06a3611e9ba@mail.gmail.com> (sfid-20080808_184920_594440_2940B683)
Date: Fri, 8 Aug 2008 09:49:15 -0700
From: "Luis R. Rodriguez" <mcgrof@gmail.com>
To: "Jack Howarth" <howarth@bromo.msbb.uc.edu>
Subject: Re: N protocol on 802.11a freq signal strength
Cc: linux-wireless@vger.kernel.org
In-Reply-To: <20080808141616.GA26224@bromo.msbb.uc.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
References: <20080808141616.GA26224@bromo.msbb.uc.edu>
Sender: linux-wireless-owner@vger.kernel.org

On Fri, Aug 8, 2008 at 7:16 AM, Jack Howarth <howarth@bromo.msbb.uc.edu> wrote:
>    After replacing my Linksys WRT150N wireless router with an
> Apple Airport Extreme Gigabit ethernet wireless router, configured
> for using the N protocols on the 802.11a wireless frequencies, I
> can confirm that the ath9k git from last week connects to this
> configuration. I have noticed one oddity though. The reported
> signal strength (in the NetworkManager menu bar icon) is significantly
> lower than that shown under Mac OS X 10.5.

The link quality we report right now should be lower than the real
one. We will enhance this later but rest assured its the same.

> Also, I notice under Mac OS X
> 10.5, by holding the option key on the Finder's Airport icon, that the
> transmit speed is 300 Mbps when the MacBook Pro is in the same room as
> the wireless router but only 108 Mbps when a couple rooms away. Should
> the ath9k report such dynamic changes in transmit speed? Under Mac OS X
> that transmit speed changes as I move the portable back and forth
> between the two locations. Thanks in advance for any information.

Keep in mind 2.6.27 has aggregation disabled right now due to the new
TX MQ changes so you won't be able to get aggregation going for any
11n wireless device. That said, I am not familiar with the Mac OS X
option key thingy to compute throughput. If you can provide technical
details as to how it computes it or where it does this (AP or STA) it
can help.

  Luis