Return-path: Received: from fmmailgate01.web.de ([217.72.192.221]:40413 "EHLO fmmailgate01.web.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752198AbYKNSlJ (ORCPT ); Fri, 14 Nov 2008 13:41:09 -0500 From: Christian Lamparter To: linux-wireless@vger.kernel.org Subject: [PATCH 1/4] p54: enable Mesh Point support Date: Fri, 14 Nov 2008 19:41:06 +0100 Cc: John W Linville , Larry Finger , Johannes Berg , Pavel Roskin , "Andrey Yurovsky" MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Message-Id: <200811141941.06542.chunkeey@web.de> (sfid-20081114_194114_393716_48A50CFA) Sender: linux-wireless-owner@vger.kernel.org List-ID: This patch enables Mesh Point operation for any p54 device. Signed-off-by: Christian Lamparter --- diff -Nurp a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c --- a/drivers/net/wireless/p54/p54common.c 2008-11-01 20:41:08.000000000 +0100 +++ b/drivers/net/wireless/p54/p54common.c 2008-11-02 13:34:24.000000000 +0100 @@ -1059,6 +1059,7 @@ static int p54_tx_fill(struct ieee80211_ break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { *aid = 0; *queue = 3; @@ -1571,6 +1572,7 @@ static int p54_add_interface(struct ieee case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: priv->mode = conf->type; break; default: @@ -1590,6 +1592,7 @@ static int p54_add_interface(struct ieee p54_setup_mac(dev, P54_FILTER_TYPE_AP, priv->mac_addr); break; case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: p54_setup_mac(dev, P54_FILTER_TYPE_IBSS, NULL); break; default: @@ -1654,6 +1657,7 @@ static int p54_config_interface(struct i break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: memcpy(priv->bssid, conf->bssid, ETH_ALEN); ret = p54_set_freq(dev, dev->conf.channel->center_freq); if (ret) @@ -1829,6 +1833,7 @@ struct ieee80211_hw *p54_init_common(siz dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION | NL80211_IFTYPE_ADHOC | + NL80211_IFTYPE_MESH_POINT | NL80211_IFTYPE_AP); dev->channel_change_time = 1000; /* TODO: find actual value */