Return-path: Received: from wf-out-1314.google.com ([209.85.200.169]:21329 "EHLO wf-out-1314.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751633AbYKPXyR (ORCPT ); Sun, 16 Nov 2008 18:54:17 -0500 Received: by wf-out-1314.google.com with SMTP id 27so2346465wfd.4 for ; Sun, 16 Nov 2008 15:54:16 -0800 (PST) Message-ID: <1ba2fa240811161554r45d98ae7h3a37ae78c332a4dd@mail.gmail.com> (sfid-20081117_005428_589070_F1C02109) Date: Mon, 17 Nov 2008 01:54:16 +0200 From: "Tomas Winkler" To: "Carlos R. Mafra" Subject: Re: iwlagn driver segfault in 2.6.28-rc3 Cc: "reinette chatre" , "Lukas Hejtmanek" , "linux-kernel@vger.kernel.org" , "linux-wireless@vger.kernel.org" , "ipw3945-devel@lists.sourceforge.net" In-Reply-To: <20081116125148.GA16746@localhost.aei.mpg.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 References: <20081111143410.GA4401@ics.muni.cz> <1226560041.1115.945.camel@rc-desk> <20081116120621.GA3937@localhost.aei.mpg.de> <1ba2fa240811160429ld8cc080s7e023b0398eeda08@mail.gmail.com> <20081116125148.GA16746@localhost.aei.mpg.de> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Sun, Nov 16, 2008 at 2:51 PM, Carlos R. Mafra wrote: > On Sun 16.Nov'08 at 14:29:12 +0200, Tomas Winkler wrote: >> On Sun, Nov 16, 2008 at 2:06 PM, Carlos R. Mafra wrote: >> > I just got (another) one of this too. >> > >> > The wireless connection suddenly lost the AP and I was waiting >> > for ifplugd to reconnect to it again automatically, as it always >> > does. >> > >> > After waiting for one or two minutes I decided to 'modprobe -r >> > iwlagn' but this command never returned (it got stuck). >> > >> > Then I looked at the end of dmesg and found this: >> >> Did you happen to have logs open so I can see what happen prior to that >> We found out that this is due to double removal of an encryption key >> but I still haven't see the exact flow. > > Here is the whole dmesg which I saved after that GPF. > > It is a bit bit because I had already suspended to ram a few times > (which is working _fine_, btw) Can you please try this one (might be white space broken, just pasted in) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3..d848c63 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -734,6 +734,12 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "Removing wrong key %d 0x%x\n", keyconf->keyidx, key_flags)) { + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", Thanks Tomas > > BIOS EBDA/lowmem at: 0009f800/0009f800 > Linux version 2.6.28-rc4-keypress-00322-g58e20d8 (mafra@localhost) (gcc version 4.2.3 (4.2.3-6mnb1)) #14 SMP Fri Nov 14 00:02:57 CET 2008 > Command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364 > KERNEL supported cpus: > Intel GenuineIntel > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) > BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI data) > BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) > BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) > DMI present. > last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > init_memory_mapping: 0000000000000000-000000007f6d0000 > 0000000000 - 007f600000 page 2M > 007f600000 - 007f6d0000 page 4k > kernel direct mapping tables up to 7f6d0000 @ 8000-c000 > last_map_addr: 7f6d0000 end: 7f6d0000 > RAMDISK: 37dc9000 - 37fef347 > ACPI: RSDP 000F8060, 0024 (r2 PTLTD ) > ACPI: XSDT 7F6D7E0E, 008C (r1 Sony VAIO 20070704 PTL 0) > ACPI: FACP 7F6DFC04, 00F4 (r3 Sony VAIO 20070704 PTL 1) > ACPI: DSDT 7F6D9217, 6979 (r2 Sony VAIO 20070704 PTL 20050624) > ACPI: FACS 7F6E2FC0, 0040 > ACPI: APIC 7F6DFCF8, 0068 (r1 Sony VAIO 20070704 PTL 5A) > ACPI: HPET 7F6DFD60, 0038 (r1 Sony VAIO 20070704 PTL 5A) > ACPI: MCFG 7F6DFD98, 003C (r1 Sony VAIO 20070704 PTL 5A) > ACPI: SLIC 7F6DFDD4, 0176 (r1 Sony VAIO 20070704 PTL 1000000) > ACPI: TMOR 7F6DFF4A, 0026 (r1 Sony VAIO 20070704 PTL 3) > ACPI: APIC 7F6DFF70, 0068 (r1 Sony VAIO 20070704 PTL 0) > ACPI: BOOT 7F6DFFD8, 0028 (r1 Sony VAIO 20070704 PTL 1) > ACPI: SSDT 7F6D90FA, 011D (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8FD7, 0123 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8482, 0287 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D83CE, 00B4 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D7E9A, 0534 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: BIOS bug: multiple APIC/MADT found, using 0 > ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org > ACPI: DMI detected: Sony > ACPI: Local APIC address 0xfee00000 > (6 early reservations) ==> bootmem [0000000000 - 007f6d0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 0000746690] TEXT DATA BSS ==> [0000200000 - 0000746690] > #3 [0037dc9000 - 0037fef347] RAMDISK ==> [0037dc9000 - 0037fef347] > #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] > #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] > [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009f > 0: 0x00000100 -> 0x0007f6d0 > On node 0 totalpages: 521839 > DMA zone: 56 pages used for memmap > DMA zone: 1451 pages reserved > DMA zone: 2492 pages, LIFO batch:0 > DMA32 zone: 7080 pages used for memmap > DMA32 zone: 510760 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 > PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > PERCPU: Allocating 45056 bytes of per cpu data > NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513252 > Kernel command line: BOOT_IMAGE=2628-rc4-keypress-00322-g58e20d root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > Fast TSC calibration using PIT > Detected 1995.352 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Memory: 2047292k/2087744k available (2911k kernel code, 388k absent, 39592k reserved, 1516k data, 320k init) > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.98 BogoMIPS (lpj=6651173) > Mount-cache hash table entries: 256 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > ACPI: Core revision 20080926 > Setting APIC routing to flat > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649999) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM2) > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Total of 2 processors activated (7983.23 BogoMIPS). > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > net_namespace: 856 bytes > NET: Registered protocol family 16 > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: Using configuration type 1 for base access > ACPI: EC: Look up EC in DSDT > ACPI: BIOS _OSI(Linux) query ignored via DMI > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in interrupt mode > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff] > pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] > pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] > pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff] > pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] > pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] > pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc604800-0xfc604bff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.7: PME# disabled > pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] > pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] > pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] > pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc604c00-0xfc604fff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO > pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] > pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] > pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] > pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] > pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] > pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] > pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] > pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] > pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] > pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc604000-0xfc6047ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] > pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] > pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] > pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] > pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] > pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] > pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] > pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] > pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] > pci 0000:06:00.0: PME# supported from D0 D3hot D3cold > pci 0000:06:00.0: PME# disabled > pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] > pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] > pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] > pci 0000:08:00.0: reg 10 64bit mmio: [0xfc200000-0xfc203fff] > pci 0000:08:00.0: reg 18 io port: [0x5000-0x50ff] > pci 0000:08:00.0: supports D1 D2 > pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:08:00.0: PME# disabled > pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] > pci 0000:00:1c.4: bridge 32bit mmio: [0xfc200000-0xfc2fffff] > pci 0000:09:03.0: reg 10 32bit mmio: [0xfc300000-0xfc300fff] > pci 0000:09:03.0: supports D1 D2 > pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:09:03.0: PME# disabled > pci 0000:09:03.1: reg 10 32bit mmio: [0xfc302000-0xfc3027ff] > pci 0000:09:03.1: reg 14 32bit mmio: [0xfc304000-0xfc307fff] > pci 0000:09:03.1: supports D1 D2 > pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:09:03.1: PME# disabled > pci 0000:09:03.2: reg 10 32bit mmio: [0xfc301000-0xfc301fff] > pci 0000:09:03.2: supports D1 D2 > pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot > pci 0000:09:03.2: PME# disabled > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff] > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > PCI: Using ACPI for IRQ routing > cfg80211: Calling CRDA to update world regulatory domain > cfg80211: Failed calling CRDA > cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 comparators, 64-bit 14.318180 MHz counter > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 10 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved > system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved > system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved > system 00:01: iomem range 0xe0000000-0xefffffff has been reserved > system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved > system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved > system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved > system 00:06: ioport range 0x680-0x69f has been reserved > system 00:06: ioport range 0x800-0x80f has been reserved > system 00:06: ioport range 0x1000-0x107f has been reserved > system 00:06: ioport range 0x1180-0x11bf has been reserved > system 00:06: ioport range 0x1640-0x164f has been reserved > system 00:06: ioport range 0xfe00-0xfe7f has been reserved > system 00:06: ioport range 0xfe80-0xfeff has been reserved > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.0: IO window: 0x2000-0x2fff > pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff > pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 > pci 0000:00:1c.1: IO window: 0x3000-0x3fff > pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff > pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 > pci 0000:00:1c.2: IO window: 0x4000-0x4fff > pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff > pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff > pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08 > pci 0000:00:1c.4: IO window: 0x5000-0x5fff > pci 0000:00:1c.4: MEM window: 0xfc200000-0xfc2fffff > pci 0000:00:1c.4: PREFETCH window: disabled > pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a > pci 0000:09:03.0: IO window: 0x006000-0x0060ff > pci 0000:09:03.0: IO window: 0x006400-0x0064ff > pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff > pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 > pci 0000:00:1e.0: IO window: 0x6000-0x6fff > pci 0000:00:1e.0: MEM window: 0xfc300000-0xfc3fffff > pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > bus: 00 index 0 io port: [0x00-0xffff] > bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] > bus: 02 index 0 io port: [0x2000-0x2fff] > bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff] > bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff] > bus: 02 index 3 mmio: [0x0-0x0] > bus: 04 index 0 io port: [0x3000-0x3fff] > bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff] > bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff] > bus: 04 index 3 mmio: [0x0-0x0] > bus: 06 index 0 io port: [0x4000-0x4fff] > bus: 06 index 1 mmio: [0xfa000000-0xfbffffff] > bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff] > bus: 06 index 3 mmio: [0x0-0x0] > bus: 08 index 0 io port: [0x5000-0x5fff] > bus: 08 index 1 mmio: [0xfc200000-0xfc2fffff] > bus: 08 index 2 mmio: [0x0-0x0] > bus: 08 index 3 mmio: [0x0-0x0] > bus: 09 index 0 io port: [0x6000-0x6fff] > bus: 09 index 1 mmio: [0xfc300000-0xfc3fffff] > bus: 09 index 2 mmio: [0x88000000-0x8bffffff] > bus: 09 index 3 io port: [0x00-0xffff] > bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff] > bus: 0a index 0 io port: [0x6000-0x60ff] > bus: 0a index 1 io port: [0x6400-0x64ff] > bus: 0a index 2 mmio: [0x88000000-0x8bffffff] > bus: 0a index 3 mmio: [0x90000000-0x93ffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > Unpacking initramfs... done > Freeing initrd memory: 2200k freed > Simple Boot Flag at 0x36 set to 0x1 > msgmni has been set to 4003 > alg: No test for stdrng (krng) > io scheduler noop registered > io scheduler cfq registered (default) > pci 0000:00:02.0: Boot video device > vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 4000k, total 7616k > vesafb: mode is 1280x800x16, linelength=2560, pages=2 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 160x50 > fb0: VESA VGA frame buffer device > ACPI: AC Adapter [ADP1] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 > ACPI: Lid Switch [LID0] > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > ACPI: Power Button (CM) [PWRB] > acpi device:08: registered as cooling_device0 > acpi device:09: registered as cooling_device1 > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/input/input2 > ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > ACPI: SSDT 7F6D8C52, 02A1 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8709, 04B7 (r1 Sony VAIO 20070704 PTL 20050624)<7>Switched to high resolution mode on CPU 1 > > Switched to high resolution mode on CPU 0 > Monitor-Mwait will be used to enter C-1 state > Monitor-Mwait will be used to enter C-2 state > Monitor-Mwait will be used to enter C-3 state > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > processor ACPI_CPU:00: registered as cooling_device2 > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT 7F6D8EF3, 00E4 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: SSDT 7F6D8BC0, 0092 (r1 Sony VAIO 20070704 PTL 20050624) > ACPI: EC: GPE storm detected, transactions will use polling mode > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > processor ACPI_CPU:01: registered as cooling_device3 > ACPI: Processor [CPU1] (supports 8 throttling states) > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [TZ00] (45 C) > thermal LNXTHERM:02: registered as thermal_zone1 > ACPI: Thermal Zone [TZ01] (45 C) > Generic RTC Driver v1.07 > Linux agpgart interface v0.103 > agpgart-intel 0000:00:00.0: Intel 965GM Chipset > agpgart-intel 0000:00:00.0: detected 7676K stolen memory > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 > [drm] Initialized drm 1.1.0 20060810 > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > [drm] Initialized i915 1.6.0 20080730 on minor 0 > intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets > intelfb: Version 0.9.6 > intelfb: Cannot reserve FB region. > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > sony-laptop: Sony Notebook Control Driver v0.6. > input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input3 > input: Sony Vaio Jogdial as /devices/virtual/input/input4 > sony-laptop: detected Sony Vaio FZ Series > Uniform Multi-Platform E-IDE driver > ide-gd driver 1.18 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > cpuidle: using governor ladder > cpuidle: using governor menu > Marking TSC unstable due to TSC halts in idle > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > Advanced Linux Sound Architecture Driver Version 1.0.18rc3. > ALSA device list: > No soundcards found. > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 17 > NET: Registered protocol family 15 > Freeing unused kernel memory: 320k freed > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc604800 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc604c00 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > SCSI subsystem initialized > Driver 'sd' needs updating - please use bus_type methods > Clocksource tsc unstable (delta = -128025211 ns) > libata version 3.00 loaded. > ahci 0000:00:1f.2: version 3.0 > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed > ata2: DUMMY > ata3: DUMMY > usb 1-2: new high speed USB device using ehci_hcd and address 2 > usb 1-2: configuration #1 chosen from 1 choice > input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8 > input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ATA-8: FUJITSU MHX2250BT, 0041000B, max UDMA/100 > ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0041 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 < sda5 sda6 > > sd 0:0:0:0: [sda] Attached SCSI disk > ata_piix 0000:00:1f.1: version 2.12 > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > scsi3 : ata_piix > scsi4 : ata_piix > ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 > ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 > ata4.00: ATAPI: SONY DVD RW AW-G540A, 1.W0, max UDMA/33 > ata4.00: configured for UDMA/33 > isa bounce pool size: 16 pages > scsi 3:0:0:0: CD-ROM SONY DVD RW AW-G540A 1.W0 PQ: 0 ANSI: 5 > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: sda1: orphan cleanup on readonly fs > ext3_orphan_cleanup: deleting unreferenced inode 720331 > ext3_orphan_cleanup: deleting unreferenced inode 2013901 > EXT3-fs: sda1: 2 orphan inodes deleted > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > Linux video capture interface: v2.00 > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd > iwlagn: Copyright(c) 2003-2008 Intel Corporation > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: setting latency timer to 64 > iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 3:0:0:0: Attached scsi CD-ROM sr0 > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 > sky2 driver version 1.22 > sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > sky2 0000:08:00.0: setting latency timer to 64 > sky2 0000:08:00.0: Yukon-2 FE chip revision 1 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sr 3:0:0:0: Attached scsi generic sg1 type 5 > uvcvideo: Found UVC 1.00 device (05ca:183b) > iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels > sky2 0000:08:00.0: Marvell Yukon 88E8036 Fast Ethernet Controller > Part Number: Yukon 88E8036 > Engineering Level: Rev. 1.6 > Manufacturer: Marvell > uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). > uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26). > uvcvideo: Failed to initialize the device (-5). > usbcore: registered new interface driver uvcvideo > USB Video Class driver (v0.1.0) > sky2 eth0: addr 00:1a:80:4a:7f:37 > iwlagn 0000:06:00.0: PCI INT A disabled > phy0: Selected rate control algorithm 'iwl-agn-rs' > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106) > iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302903fd0] > iwlagn: TX Power requested while scanning! > iwlagn: Error sending TX power (-11) > iwlagn 0000:06:00.0: PCI INT A disabled > Non-volatile memory driver v1.2 > EXT3 FS on sda1, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda5, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 4281280k swap on /dev/sda6. Priority:-1 extents:1 across:4281280k > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX AssocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > wlan0: deauthenticated > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > ACPI: EC: missing confirmations, switch off interrupt mode. > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > process `skype' is using obsolete setsockopt SO_BSDCOMPAT > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649998) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > ACPI: EC: missing confirmations, switch off interrupt mode. > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.31 BogoMIPS (lpj=6650107) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.29 BogoMIPS (lpj=6650066) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... <7>wlan0: deauthenticating by local choice (reason=1) > done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > wlan0: deauthenticated > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > ACPI: EC: missing confirmations, switch off interrupt mode. > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.30 BogoMIPS (lpj=6650083) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:dd:92:01 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:dd:92:01 > wlan0: RX ReassocResp from 00:0b:86:dd:92:01 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > hub 2-0:1.0: unable to enumerate USB device on port 2 > usb 2-2: new high speed USB device using ehci_hcd and address 3 > usb 2-2: configuration #1 chosen from 1 choice > Initializing USB Mass Storage driver... > scsi5 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > scsi 5:0:0:0: Direct-Access SanDisk Sansa Clip 8GB v02. PQ: 0 ANSI: 0 > sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 > sd 5:0:0:0: [sdb] Assuming drive cache: write through > sd 5:0:0:0: [sdb] 15993856 512-byte hardware sectors: (8.18 GB/7.62 GiB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 > sd 5:0:0:0: [sdb] Assuming drive cache: write through > sdb: > sd 5:0:0:0: [sdb] Attached SCSI removable disk > sd 5:0:0:0: Attached scsi generic sg2 type 0 > usb-storage: device scan complete > usb 2-2: USB disconnect, address 3 > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.05 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > Suspending console(s) (use no_console_suspend to debug) > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > ACPI handle has no context! > ACPI handle has no context! > tifm_7xx1 0000:09:03.2: PCI INT C disabled > ACPI handle has no context! > ACPI handle has no context! > iwlagn 0000:06:00.0: PCI INT A disabled > ahci 0000:00:1f.2: PCI INT B disabled > ata_piix 0000:00:1f.1: PCI INT A disabled > ehci_hcd 0000:00:1d.7: PCI INT A disabled > uhci_hcd 0000:00:1d.2: PCI INT C disabled > uhci_hcd 0000:00:1d.1: PCI INT B disabled > uhci_hcd 0000:00:1d.0: PCI INT A disabled > HDA Intel 0000:00:1b.0: PCI INT A disabled > ehci_hcd 0000:00:1a.7: PCI INT C disabled > uhci_hcd 0000:00:1a.1: PCI INT B disabled > uhci_hcd 0000:00:1a.0: PCI INT A disabled > ACPI: Preparing to enter system sleep state S3 > Disabling non-boot CPUs ... > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Back to C! > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > SMP alternatives: switching to SMP code > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3991.26 BogoMIPS (lpj=6650021) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d > CPU0 attaching NULL sched-domain. > Switched to high resolution mode on CPU 1 > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > CPU1 is up > ACPI: Waking up from system sleep state S3 > sony-laptop: detected Sony Vaio FZ Series > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > usb usb3: root hub lost power or was reset > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > usb usb4: root hub lost power or was reset > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205) > pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201) > pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf9f0f800) > pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x3030) > pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40307) > pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) > pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) > pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) > pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) > pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) > pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) > pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) > pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) > pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > usb usb5: root hub lost power or was reset > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > usb usb6: root hub lost power or was reset > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > usb usb7: root hub lost power or was reset > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x8bf18801) > pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) > pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22806060) > pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) > pci 0000:00:1e.0: setting latency timer to 64 > ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) > ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) > ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.1: setting latency timer to 64 > ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) > ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:1f.2: setting latency timer to 64 > i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x8c000000) > iwlagn 0000:06:00.0: enabling device (0000 -> 0002) > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) > iwlagn 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfa000004) > iwlagn 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100106) > sky2 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) > sky2 0000:08:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x5001) > sky2 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) > sky2 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) > sky2 0000:08:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100107) > pci 0000:09:03.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3440105) > pci 0000:09:03.0: restoring config space at offset 0xe (was 0x0, writing 0x64fc) > pci 0000:09:03.0: restoring config space at offset 0xd (was 0x0, writing 0x6400) > pci 0000:09:03.0: restoring config space at offset 0xc (was 0x0, writing 0x60fc) > pci 0000:09:03.0: restoring config space at offset 0xb (was 0x0, writing 0x6000) > pci 0000:09:03.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) > pci 0000:09:03.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) > pci 0000:09:03.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) > pci 0000:09:03.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) > pci 0000:09:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb00d0a09) > pci 0000:09:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc300000) > pci 0000:09:03.0: restoring config space at offset 0x3 (was 0x820000, writing 0x823110) > pci 0000:09:03.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) > pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ohci1394 0000:09:03.1: restoring config space at offset 0xf (was 0x4030200, writing 0x403020a) > ohci1394 0000:09:03.1: restoring config space at offset 0x5 (was 0x0, writing 0xfc304000) > ohci1394 0000:09:03.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc302000) > ohci1394 0000:09:03.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) > ohci1394 0000:09:03.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] > tifm_7xx1 0000:09:03.2: restoring config space at offset 0xf (was 0x40703ff, writing 0x4070307) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc301000) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x3 (was 0x800000, writing 0x803910) > tifm_7xx1 0000:09:03.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) > tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:02.0: setting latency timer to 64 > ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out > ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out > ata4.00: configured for UDMA/33 > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > sd 0:0:0:0: [sda] Starting disk > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Restarting tasks ... <7>wlan0: direct probe to AP 00:0b:86:dd:92:01 try 1 > done. > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 2 > wlan0: direct probe to AP 00:0b:86:dd:92:01 try 3 > wlan0: direct probe to AP 00:0b:86:dd:92:01 timed out > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:28:1a:d1 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:28:1a:d1 > wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1) > wlan0: associated > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > wlan0: deauthenticated > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 1 > wlan0: direct probe to AP 00:0b:86:28:1a:d1 try 2 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:28:1a:d1 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:28:1a:d1 > wlan0: RX ReassocResp from 00:0b:86:28:1a:d1 (capab=0x431 status=0 aid=1) > wlan0: associated > phy0: failed to restore operational channel after scan > phy0: failed to restore operational channel after scan > wlan0: direct probe to AP 00:0b:86:28:21:71 try 1 > wlan0: direct probe to AP 00:0b:86:28:21:71 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:28:21:71 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:28:21:71 > wlan0: associate with AP 00:0b:86:28:21:71 > wlan0: RX ReassocResp from 00:0b:86:28:21:71 (capab=0x431 status=0 aid=1) > wlan0: associated > ACPI: EC: missing confirmations, switch off interrupt mode. > iwlagn 0000:06:00.0: PCI INT A disabled > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > iwlagn 0000:06:00.0: PCI INT A disabled > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > Registered led device: iwl-phy0:radio > Registered led device: iwl-phy0:assoc > Registered led device: iwl-phy0:RX > Registered led device: iwl-phy0:TX > wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1 > wlan0: direct probe to AP 00:0b:86:3e:10:31 try 1 > wlan0 direct probe responded > wlan0: authenticate with AP 00:0b:86:3e:10:31 > wlan0: authenticated > wlan0: associate with AP 00:0b:86:3e:10:31 > wlan0: RX AssocResp from 00:0b:86:3e:10:31 (capab=0x431 status=0 aid=1) > wlan0: associated > wlan0: deauthenticating by local choice (reason=3) > iwlagn 0000:06:00.0: PCI INT A disabled > iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) > general protection fault: 0000 [#1] SMP > last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > CPU 1 > Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage xt_comment xt_policy xt_tcpmss xt_pkttype xt_owner xt_NFQUEUE xt_NFLOG xt_multiport xt_MARK xt_mark xt_mac xt_limit xt_length xt_iprange xt_hashlimit xt_dscp xt_dccp xt_CLASSIFY snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nvram ohci1394 ieee1394 snd_hda_intel uvcvideo snd_pcm sg sky2 i2c_i801 sr_mod iwlagn compat_ioctl32 snd_timer evdev videodev snd_page_alloc v4l1_compat snd_hwdep ata_piix ahci libata sd_mod scsi_mod uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: scsi_wait_scan] > Pid: 3163, comm: ifplugd Not tainted 2.6.28-rc4-keypress-00322-g58e20d8 #14 > RIP: 0010:[] [] iwl_eeprom_query16+0xb/0x20 > RSP: 0018:ffff88007b631a88 EFLAGS: 00010092 > RAX: 7fff88007dfd5400 RBX: ffff88007d81a000 RCX: 00000000800600f0 > RDX: 0000000000000cfc RSI: 0000000000000090 RDI: ffff88007dcc1940 > RBP: ffff88007b631a88 R08: 0000000000000002 R09: ffff88007b631a5c > R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000080006 > R13: ffff88007dcc1940 R14: ffff88007dcc29f8 R15: ffff88007d81a740 > FS: 00007f7f93ef16f0(0000) GS:ffff88007f0686c0(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00002ad88fdfd000 CR3: 000000007d935000 CR4: 00000000000006a0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process ifplugd (pid: 3163, threadinfo ffff88007b630000, task ffff88007b5ba980) > Stack: > ffff88007b631af8 ffffffffa0108526 ffff88007b631af8 ffffffffa00f3aaf > 0000000000000000 ffff88007dcc2328 0000000000000292 0000000000000000 > 0143000000000000 ffff88007d81a000 ffff88007dcc1940 ffff88007dcc2328 > Call Trace: > [] iwl4965_nic_config+0xa6/0x380 [iwlagn] > [] ? iwl4965_set_pwr_src+0x1cf/0x3d0 [iwlagn] > [] iwl_hw_nic_init+0x11b/0x1d0 > [] __iwl4965_up+0x1a7/0x720 [iwlagn] > [] iwl4965_mac_start+0xd38/0x1570 [iwlagn] > [] ? __wake_up_sync+0x55/0x70 > [] ? sock_def_readable+0x6f/0x80 > [] ? unix_dgram_sendmsg+0x463/0x4f0 > [] ieee80211_open+0x328/0x830 > [] ? sock_sendmsg+0xdb/0xf0 > [] dev_open+0x64/0xc0 > [] dev_change_flags+0x91/0x1b0 > [] devinet_ioctl+0x5b3/0x750 > [] inet_ioctl+0x6d/0x90 > [] sock_ioctl+0xc5/0x240 > [] vfs_ioctl+0x31/0x90 > [] do_vfs_ioctl+0x32b/0x460 > [] sys_ioctl+0x4a/0x80 > [] system_call_fastpath+0x16/0x1b > Code: 48 8b 47 18 55 48 89 e5 48 8b 40 18 48 8b 00 ff 90 00 01 00 00 c9 c3 66 0f 1f 84 00 00 00 00 00 48 8b 87 98 22 01 00 55 48 89 e5 <0f> b6 54 06 01 0f b6 04 30 c9 c1 e2 08 09 d0 0f b7 c0 c3 66 90 > RIP [] iwl_eeprom_query16+0xb/0x20 > RSP > ---[ end trace 28eaede31d178563 ]--- > >