Return-path: Received: from pD9E7DD47.dip.t-dialin.net ([217.231.221.71]:53745 "EHLO apo2k4.ath.cx" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753247AbZAYBHa (ORCPT ); Sat, 24 Jan 2009 20:07:30 -0500 Received: from lucien (unknown [10.8.1.2]) by apo2k4.ath.cx (Postfix) with ESMTPA id E86CE150076 for ; Sun, 25 Jan 2009 02:07:27 +0100 (CET) Date: Sun, 25 Jan 2009 02:07:27 +0100 From: Valentin To: linux-wireless@vger.kernel.org Subject: Fw: [linux-wireless] Re: p54 + ISL3887 + master mode? Message-ID: <20090125020727.544a6819@lucien> (sfid-20090125_020737_198414_A37CA60F) Mime-Version: 1.0 Content-Type: multipart/signed; boundary="Sig_/X62VAW74fxqTsiDiHIZIJ79"; protocol="application/pgp-signature"; micalg=PGP-SHA1 Sender: linux-wireless-owner@vger.kernel.org List-ID: --Sig_/X62VAW74fxqTsiDiHIZIJ79 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable > On Sat, 24 Jan 2009 16:51:25 +0100 > Artur Skawina wrote: >=20 > > > you probably want a kernel w/ at least this=20 > > > http://git.kernel.org/?p=3Dlinux/kernel/git/torvalds/linux-2.6.git;a= =3Dcommit;h=3De5ea92a7528d304e8e327d0d261653e98b163e8a > > > hence 2.6.29+ or even newer to get the other p54 fixes. > >=20 > > meant 2.6.28+, of course. >=20 > Right, I'm going to try that. Thanks :) That did help, thanks :) But it's not working completely yet: When I start hostapd, it create a mon.wlan# interface and sets wlan# into master mode, but other boxes don't see the network. Here's hostapd's output: Configuration file: .conf ctrl_interface_group=3D0 Opening raw packet socket for ifindex 209 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=3D22 WE(source)=3D21 enc_capa=3D0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=3D1 chan=3D1 freq=3D2412 MHz max_tx_power=3D27 dBm ... Allowed channel: mode=3D0 chan=3D11 freq=3D2462 MHz max_tx_power=3D27 dBm RATE[0] rate=3D10 flags=3D0x6 RATE[1] rate=3D20 flags=3D0x6 RATE[2] rate=3D55 flags=3D0x4 RATE[3] rate=3D110 flags=3D0x4 Passive scanning not supported Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr ... and ssid '...' SSID - hexdump_ascii(len=3D6): ... PSK (ASCII passphrase) - hexdump_ascii(len=3D13): ... PSK (from passphrase) - hexdump(len=3D32): ... WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=3D32): [REMOVED] GTK - hexdump(len=3D32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) Failed to set beacon head/tail wlan1: Setup of interface done. The only interesting part here seems to be "Failed to set beacon head/tail", but I can't find anything helpful about that on google. This is my hostapd config: interface=3Dwlan1 driver=3Dnl80211 logger_syslog=3D-1 logger_syslog_level=3D1 logger_stdout=3D-1 logger_stdout_level=3D0 dump_file=3D/tmp/hostapd.dump ctrl_interface=3D/var/run/hostapd ctrl_interface_group=3D0 auth_algs=3D3 ssid=3D... wpa=3D2 wpa_passphrase=3D... wpa_key_mgmt=3DWPA-PSK wpa_pairwise=3DTKIP CCMP Any new ideas? Sorry if my questions are stupid... --Valentin --Sig_/X62VAW74fxqTsiDiHIZIJ79 Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkl7u08ACgkQ22z6WcGtDs+8eQCgtrEra3g02NHwSxATqefClIBE gQ0AnAsqtZHuso08uRbiPnx3IySNbR9x =BnNy -----END PGP SIGNATURE----- --Sig_/X62VAW74fxqTsiDiHIZIJ79--