Return-path: Received: from rn-out-0910.google.com ([64.233.170.191]:33949 "EHLO rn-out-0910.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751327AbZA3IRx (ORCPT ); Fri, 30 Jan 2009 03:17:53 -0500 Received: by rn-out-0910.google.com with SMTP id k40so252556rnd.17 for ; Fri, 30 Jan 2009 00:17:51 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <498269D5.7080204@openwrt.org> References: <498269D5.7080204@openwrt.org> Date: Fri, 30 Jan 2009 10:17:51 +0200 Message-ID: <40f31dec0901300017g2504e494mc75db9d9a0ffca7@mail.gmail.com> (sfid-20090130_091758_355179_EF0D9174) Subject: Re: [PATCH,RFC 0/2] ath5k: implement tx power calibration on ar2413/5413 From: Nick Kossifidis To: Felix Fietkau Cc: linux-wireless , Bob Copeland Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: 2009/1/30 Felix Fietkau : > Hi, > > I got my AR2413 patches to the point where ath5k properly > initializes the PDGAIN curves (register dumps verified against > what the madwifi HAL does), and it does Tx at much better > power level and with 54 Mbit (tested on an AR5413 card). > Power still isn't as good as on madwifi yet, but much closer > than before, and I actually get >20Mbit/s throughput now. > > Enjoy! > > - Felix > You are the man ! I'm sending some patches that update phy.c, initvals.c and reset.c etc today and i'll merge this one with RF5111/RF5112 pcdac stuff and tpc support asap to have power table support for all chips. We also need to work out regulatory stuff before we fully enable tx power support so i have to test this on a spectrum analyzer. Just give me some time and i'll come back with code ;-) -- GPG ID: 0xD21DB2DB As you read this post global entropy rises. Have Fun ;-) Nick