Return-path: Received: from mail-gx0-f21.google.com ([209.85.217.21]:34058 "EHLO mail-gx0-f21.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751621AbZA0Doi (ORCPT ); Mon, 26 Jan 2009 22:44:38 -0500 Received: by gxk14 with SMTP id 14so5453320gxk.13 for ; Mon, 26 Jan 2009 19:44:37 -0800 (PST) MIME-Version: 1.0 In-Reply-To: References: Date: Mon, 26 Jan 2009 22:44:37 -0500 Message-ID: (sfid-20090127_044441_474277_ACF95CDE) Subject: Re: p54usb and 2.13.24.0 Firmware fail to probe 1st generation (ISL3886 + net2280) From: Jason Andryuk To: "linux-wireless@vger.kernel.org" Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: Oh yeah, this is with wireless-testing master-2009-01-26 and master-2009-01-23. Jason On Mon, Jan 26, 2009 at 10:42 PM, Jason Andryuk wrote: > Device is ID 2001:3701 D-Link Corp. [hex] DWL-G120 Spinnaker 802.11b > > With firmware 2.13.24.0.lm86.arm, the probe fails: > > Jan 26 22:24:26 rainbow kernel: [ 153.217044] usb 5-2: new high speed > USB device using ehci_hcd and address 3 > Jan 26 22:24:26 rainbow kernel: [ 153.349788] usb 5-2: configuration > #1 chosen from 1 choice > Jan 26 22:24:26 rainbow kernel: [ 153.350045] usb 5-2: firmware: > requesting isl3886usb > Jan 26 22:24:26 rainbow kernel: [ 153.357700] phy2: p54 detected a > LM86 firmware > Jan 26 22:24:26 rainbow kernel: [ 153.357706] p54: rx_mtu reduced > from 3240 to 2392 > Jan 26 22:24:26 rainbow kernel: [ 153.357711] phy2: FW rev 2.13.24.0 > - Softmac protocol 5.9 > Jan 26 22:24:26 rainbow kernel: [ 153.357716] phy2: cryptographic > accelerator WEP:YES, TKIP:YES, CCMP:YES > Jan 26 22:24:28 rainbow kernel: [ 155.552234] p54usb: probe of > 5-2:1.0 failed with error -110 > Jan 26 22:24:48 rainbow kernel: [ 174.879425] usb 5-2: USB > disconnect, address 3 > > Change firmware to 2.13.1.0.arm.0 and it succeeds: > > Jan 26 22:24:50 rainbow kernel: [ 177.316145] usb 5-2: new high speed > USB device using ehci_hcd and address 4 > Jan 26 22:24:50 rainbow kernel: [ 177.448722] usb 5-2: configuration > #1 chosen from 1 choice > Jan 26 22:24:50 rainbow kernel: [ 177.448935] usb 5-2: firmware: > requesting isl3886usb > Jan 26 22:24:50 rainbow kernel: [ 177.485489] phy3: p54 detected a > LM86 firmware > Jan 26 22:24:50 rainbow kernel: [ 177.485496] p54: rx_mtu reduced > from 3240 to 2392 > Jan 26 22:24:50 rainbow kernel: [ 177.485501] phy3: FW rev 2.13.1.0 - > Softmac protocol 5.5 > Jan 26 22:24:50 rainbow kernel: [ 177.485506] phy3: cryptographic > accelerator WEP:YES, TKIP:YES, CCMP:YES > Jan 26 22:24:52 rainbow kernel: [ 179.392096] phy3: hwaddr > 00:15:e9:12:3f:65, MAC:isl3886 RF:Frisbee > Jan 26 22:24:52 rainbow kernel: [ 179.400242] wmaster0 (p54usb): not > using net_device_ops yet > Jan 26 22:24:52 rainbow kernel: [ 179.401500] phy3: Selected rate > control algorithm 'minstrel' > Jan 26 22:24:52 rainbow kernel: [ 179.401592] wlan0 (p54usb): not > using net_device_ops yet > Jan 26 22:24:52 rainbow kernel: [ 179.421574] udev: renamed network > interface wlan0 to wlan2 > Jan 26 22:24:56 rainbow kernel: [ 183.486290] ADDRCONF(NETDEV_UP): > wlan2: link is not ready > Jan 26 22:24:57 rainbow kernel: [ 184.181337] wlan2: authenticate > with AP 00:30:bd:c0:90:24 > Jan 26 22:24:57 rainbow kernel: [ 184.190363] wlan2: authenticated > Jan 26 22:24:57 rainbow kernel: [ 184.190370] wlan2: associate with > AP 00:30:bd:c0:90:24 > Jan 26 22:24:57 rainbow kernel: [ 184.193885] wlan2: RX AssocResp > from 00:30:bd:c0:90:24 (capab=0x1 status=0 aid=8) > Jan 26 22:24:57 rainbow kernel: [ 184.193892] wlan2: associated > Jan 26 22:24:57 rainbow kernel: [ 184.194510] wlan2: disassociating > by local choice (reason=3) > Jan 26 22:25:03 rainbow kernel: [ 189.870792] wlan2: authenticate > with AP 00:30:bd:c0:90:24 > Jan 26 22:25:03 rainbow kernel: [ 189.875492] wlan2: authenticated > Jan 26 22:25:03 rainbow kernel: [ 189.875498] wlan2: associate with > AP 00:30:bd:c0:90:24 > Jan 26 22:25:03 rainbow kernel: [ 189.878367] wlan2: RX AssocResp > from 00:30:bd:c0:90:24 (capab=0x1 status=0 aid=8) > Jan 26 22:25:03 rainbow kernel: [ 189.878374] wlan2: associated > Jan 26 22:25:03 rainbow kernel: [ 189.883084] > ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready > Jan 26 22:25:13 rainbow kernel: [ 200.460142] wlan2: no IPv6 routers present > > This message is went with the older 2.13.1.0 firmware. > > Jason >