Return-path: Received: from main.gmane.org ([80.91.229.2]:48928 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751306AbZADLdb (ORCPT ); Sun, 4 Jan 2009 06:33:31 -0500 Received: from list by ciao.gmane.org with local (Exim 4.43) id 1LJREX-0002kE-LZ for linux-wireless@vger.kernel.org; Sun, 04 Jan 2009 11:33:29 +0000 Received: from 77.21.169.220 ([77.21.169.220]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 04 Jan 2009 11:33:29 +0000 Received: from feldmann_markus by 77.21.169.220 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 04 Jan 2009 11:33:29 +0000 To: linux-wireless@vger.kernel.org From: feldmaus Subject: Re: Do not get BCM4303 to work Date: Sun, 04 Jan 2009 12:34:51 +0100 Message-ID: (sfid-20090104_123336_520339_1F428929) References: <495FB6DD.1060807@lwfinger.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed In-Reply-To: <495FB6DD.1060807@lwfinger.net> Sender: linux-wireless-owner@vger.kernel.org List-ID: Larry Finger schrieb: > Your log does not indicate that you pressed the button to turn the > wifi on. All we see is that the hardware switch was off. Yes you are right. Here is the log during Boot up: [ 21.389448] b43legacy-phy0: Broadcom 4301 WLAN found [ 21.451790] b43legacy-phy0 debug: Found PHY: Analog 0, Type 1, Revision 4 [ 21.451814] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 [ 21.488040] b43legacy-phy0 debug: Radio initialized [ 41.176020] input: b43legacy-phy0 as /class/input/input9 [ 41.276065] b43legacy ssb0:0: firmware: requesting b43legacy/ucode2.fw [ 41.340931] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw [ 41.415190] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw [ 41.624053] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27) [ 41.736308] b43legacy-phy0 debug: Chip initialized [ 41.736617] b43legacy-phy0 debug: 30-bit DMA initialized [ 41.736769] Registered led device: b43legacy-phy0:tx [ 41.744956] Registered led device: b43legacy-phy0:rx [ 41.753043] Registered led device: b43legacy-phy0:radio [ 41.760983] b43legacy-phy0 debug: Wireless interface started [ 41.760990] b43legacy-phy0 debug: Adding Interface type 2 [ 42.221213] b43legacy-phy0: Radio hardware status changed to DISABLED [ 42.230568] b43legacy-phy0 debug: Radio initialized [ 42.512043] b43legacy-phy0: Radio turned on by software [ 42.520110] b43legacy-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. Then i deactivated the wlan with my networkmanager: [ 626.730050] b43legacy-phy0 debug: Removing Interface type 2 [ 626.738361] b43legacy-phy0 debug: Wireless interface stopped [ 626.738524] b43legacy-phy0 debug: DMA-30 0x0260 (RX) max used slots: 1/64 [ 626.738579] b43legacy-phy0 debug: DMA-30 0x0200 (RX) max used slots: 0/64 [ 626.738643] b43legacy-phy0 debug: DMA-30 0x02A0 (TX) max used slots: 0/128 [ 626.744048] b43legacy-phy0 debug: DMA-30 0x0280 (TX) max used slots: 0/128 [ 626.752047] b43legacy-phy0 debug: DMA-30 0x0260 (TX) max used slots: 0/128 [ 626.762293] b43legacy-phy0 debug: DMA-30 0x0240 (TX) max used slots: 0/128 [ 626.768035] b43legacy-phy0 debug: DMA-30 0x0220 (TX) max used slots: 2/128 [ 626.776035] b43legacy-phy0 debug: DMA-30 0x0200 (TX) max used slots: 0/128 [ 626.784038] b43legacy-phy0 debug: Radio initialized [ 626.784049] b43legacy-phy0 debug: Radio initialized Then i activated my wlan with my networkmanager: [ 651.401677] input: b43legacy-phy0 as /class/input/input10 [ 651.572038] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27) [ 651.680310] b43legacy-phy0 debug: Chip initialized [ 651.680628] b43legacy-phy0 debug: 30-bit DMA initialized [ 651.680788] Registered led device: b43legacy-phy0:tx [ 651.680827] Registered led device: b43legacy-phy0:rx [ 651.680866] Registered led device: b43legacy-phy0:radio [ 651.680896] b43legacy-phy0 debug: Wireless interface started [ 651.680903] b43legacy-phy0 debug: Adding Interface type 2 [ 652.420046] b43legacy-phy0: Radio hardware status changed to DISABLED Regards Markus