Return-path: Received: from mail.deathmatch.net ([70.167.247.36]:1298 "EHLO mail.deathmatch.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752303AbZA3Njc (ORCPT ); Fri, 30 Jan 2009 08:39:32 -0500 Date: Fri, 30 Jan 2009 08:39:21 -0500 From: Bob Copeland To: Felix Fietkau Cc: linux-wireless , Nick Kossifidis Subject: Re: [PATCH,RFC 0/2] ath5k: implement tx power calibration on ar2413/5413 Message-ID: <20090130133921.GA14375@hash.localnet> (sfid-20090130_143936_223995_F1355E49) References: <498269D5.7080204@openwrt.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <498269D5.7080204@openwrt.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Fri, Jan 30, 2009 at 03:45:41AM +0100, Felix Fietkau wrote: > Hi, > > I got my AR2413 patches to the point where ath5k properly > initializes the PDGAIN curves (register dumps verified against > what the madwifi HAL does), and it does Tx at much better > power level and with 54 Mbit (tested on an AR5413 card). > Power still isn't as good as on madwifi yet, but much closer > than before, and I actually get >20Mbit/s throughput now. Very cool! I didn't notice huge change in my environment with a few iperf runs, however it is at least as good as before (around 14 Mbit/s for tcp). And it looks like you fixed all the warnings, so that is good :) -- Bob Copeland %% www.bobcopeland.com