Return-path: Received: from main.gmane.org ([80.91.229.2]:56410 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752650AbZCEUcx (ORCPT ); Thu, 5 Mar 2009 15:32:53 -0500 Received: from list by ciao.gmane.org with local (Exim 4.43) id 1LfKFP-0004fF-FT for linux-wireless@vger.kernel.org; Thu, 05 Mar 2009 20:32:51 +0000 Received: from dslb-092-076-255-001.pools.arcor-ip.net ([92.76.255.1]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 05 Mar 2009 20:32:51 +0000 Received: from feldmann_markus by dslb-092-076-255-001.pools.arcor-ip.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 05 Mar 2009 20:32:51 +0000 To: linux-wireless@vger.kernel.org From: Markus Feldmann Subject: Re: BCM4303 on HP zv5265ea Date: Thu, 05 Mar 2009 21:32:43 +0100 Message-ID: (sfid-20090305_213257_063893_4A7EDF7C) References: <49AC742D.9030309@lwfinger.net> <49AE9BDD.7070603@lwfinger.net> <49AEF58E.30302@lwfinger.net> <49B00306.8050000@lwfinger.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed In-Reply-To: <49B00306.8050000@lwfinger.net> Sender: linux-wireless-owner@vger.kernel.org List-ID: Larry Finger schrieb: > I can add a little more information. It turns out that I have one PCIe module > that will work with b43legacy as it uses ucode5 firmware. I modified my system > to load b43legacy, rather than b43, for this device. After I did that, the > RFKILL switch works correctly, just as it does in b43. > > From the above experiment, I conclude that the rfkill implementation in > b43legacy is correct. Any problems that you are having are the result of some > quirk in your hardware, therefore, none of us can debug it as we will not be > able to reproduce the problem. > > Does your RFKILL switch generate a keycode? You can test that by switching to > console 1 (CTRL/ALT/F1), log in, run the command 'showkey', and operate the > radio switch. On my system, I get a keycode of 238. BTW, use CTRL/ALT/F7 to get > back to the X console. Thank you for your help. With the kernel version 2.6.28.X it doesn't produce any keycode. I will try out the current developement version in the next days and wrote the results here. Ont this Laptop are 2 Operating Systems. Win XP and Debian Lenny. On WIn Xp the wlan card works fine. So i think the hardware is ok. So please watch here again next week. I think i could fit up the newest kernel version until next weekend. Regards Markus