Return-path: Received: from promwad.com ([83.149.69.23]:42580 "EHLO promwad.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750826AbZGXIN7 (ORCPT ); Fri, 24 Jul 2009 04:13:59 -0400 Message-ID: <4A696D33.8050606@promwad.com> Date: Fri, 24 Jul 2009 11:13:39 +0300 From: Ivan Kuten Reply-To: ivan.kuten@promwad.com MIME-Version: 1.0 To: linux-wireless@vger.kernel.org CC: "Luis R. Rodriguez" Subject: Re: WPA2, compat-wireless-2.6.31-rc3, kernel 2.6.28 - rtl8187 - association works but no ping References: <4A682BBD.90101@promwad.com> <43e72e890907230917w226c4697v41f907623e5f7d8@mail.gmail.com> In-Reply-To: <43e72e890907230917w226c4697v41f907623e5f7d8@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: > On Thu, Jul 23, 2009 at 2:22 AM, Ivan Kuten wrote: >> compat-wireless-2.6.31-rc3 > > compat-wireless-2.6.31-rc4 is out, please try that. > > Luis > Here is what I get for compat-wireless-2.6.31-rc4: <6>cfg80211: Using static regulatory domain info <6>cfg80211: Regulatory domain: US <6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) <6> (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) <6>usb 1-1: new high speed USB device using isp1761 and address 2 <6>cfg80211: Calling CRDA for country: US <6>usbcore: registered new interface driver rtl8187 <6>usb 1-1: configuration #1 chosen from 1 choice <6>hub 1-1:1.0: USB hub found <6>hub 1-1:1.0: 3 ports detected <6>usb 1-1.1: new high speed USB device using isp1761 and address 3 <6>usb 1-1.1: configuration #1 chosen from 1 choice <7>phy0: Selected rate control algorithm 'minstrel' <6>phy0: hwaddr 00277080, RTL8187vB (default) V1 + rtl8225z2 <7>phy0: device now idle <7>phy0: device no longer idle - scanning <7>phy0: device now idle <7>phy0: device no longer idle - in use <7>wlan0: authenticate with AP 01a4b568 <7>wlan0: authenticated <7>wlan0: associate with AP 01a4b568 <7>wlan0: RX AssocResp from 003e101a (capab=0x411 status=0 aid=2) <7>wlan0: associated <7>phy0: Allocated STA 002fbfc4 <7>phy0: Inserted STA 002fbfc4 <7>wlan0: switched to short slot time (BSSID=01a4b568) iwconfig output: lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"ACORP" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:72:74:AC:85 Bit Rate=1 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:2BAC-63B9-5D99-CF9A-4D39-079F-BB55-5D39 [2] Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ifconfig: eth0 Link encap:Ethernet HWaddr 02:80:AD:20:31:EB inet addr:192.168.5.1 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:188 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4077 (3.9 KiB) TX bytes:17012 (16.6 KiB) wlan0 Link encap:Ethernet HWaddr 00:12:0E:98:67:FC UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:304 (304.0 B) TX bytes:3932 (3.8 KiB) wmaster0 Link encap:UNSPEC HWaddr 00-12-0E-98-67-FC-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Neither dhcp nor setting static IP for wlan0 - no ping. Regards, Ivan